Static even with sound suppression on

So today I just finished building myself a new PC. I turned on Noise Suppression and Acoustic Echo Cancellation on in the recording section of the sound window in the enhancement tab but Skype doesn't seem to be effected by it. My friends are complaining about the loud and I mean extremely loud fuzzing from the mic.
On ACL892 from realtek and on Windows 8.1. (I also tried the modern app.)
I'm also on the latest drivers.
Also I used this same mic on my old computer without loud fuzzing.
if I listen to the mic with the settings on using the listen to mic setting, I can not hear the fuzzing so for some reason, I think skype isn't getting the settings I used for the mic.
Any info you may ned let me know!
Solved!
Go to Solution.

Tried http://community.skype.com/t5/Windows-desktop-client/Skype-7-0-ignores-system-quot-Noise-suppression... and it did not work, it made it so I couldn't use the mic enhancements at all plus it removes all my motherboard specific features. Gonna try the old skype for now, still looking for a way to actually resolve this issue. as I NEED to use skype to talk to people as I do not own or phone and the people I talk to don't use facebook.

Similar Messages

Music levels from song to song still too varied-even with "sound check" on

Hi,
A friend bought an iPod in place of his CD player so he could shuffle lots of songs.
The song volumes are inconsistent from song to song... sometimes too soft, sometimes too loud... even with "sound check" on...
What is wrong? What should he try? It's worse than his CD player so he says...
Thanks in advance.

There are 3rd party programs that do this more effectively (at least in my opinion).
For Macs there is iVolume.
Also Macmp3Gain.

I hear static even with muted microphones.

My friends also have the same problem.
Sometimes it goes away if I fiddle with the volume slider.
Skype should not be making any sound at all if everyone in the call has muted their mics.
We also have several problems with group calls.
Sometimes people get no sound and the call has to be restarted.
Sound quality is bad for some but parking the call and resuming usually fixes it.
Sometimes joining a group call does not work at all the call has to be restarted.

Since it plays fine in Windows Media Player, rip the CD in WMP and add the resulting MP3s to your iTunes library.

After upgrading to Mavericks (from 10.7.8), I get a popping sound on my speakers even with mute. Suggestions?

I've never had an issue with my sound on my MBP 15" 2011 model until I upgraded to Mavericks. Shortly after I upgraded, I started getting a 'popping' sound coming from the speakers even with the volume muted.
I'm trying to figure out what could be causing it by eliminating running programs but no luck yet. So far I've tried:
disabling graphic switching
disabling the Flash plug in for Chrome
Checking Voice over settings in accessibility (off)
Killing coreaudiod
So far, only killing coreaudiod has worked for any length of time.
I'm not playing a sound, I have nothing in the background that's generating sound (with the exception of MS Office 2013 running in Parallels generating meeting notification alerts - that seems to cause part of it) but something is obviously triggering it.
Thoughts? Comments? Suggestions?

Might be corrupted audio preferences ..
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following;
/Library/Preferences/Audio
Click Go then move both .plist files from the Audio folder to the Trash.
com.apple.audioDeviceSettings.pllist
com.apple.audio.SystemSettings.plist
Restart your Mac. See if that made a difference ...

I'm trying Facetime with my Mac Mini with OS 10.7.5 and an Acer H243HX monitor (w/ HDMI, USB). I can get the webcam-in , but even with settings in Sounds set to have the input come through the Acer monitor, I still cannot get any sound input into the Mac.

I'm trying Facetime with my Mac Mini with OS 10.7.5 and an Acer H243HX monitor (w/ HDMI, USB). I can get the webcam-in , but even with settings in Sounds set to have the input come through the Acer monitor, I still cannot get any sound input into the Mac. Any suggestions or ideas? Thanks!

I'm trying Facetime with my Mac Mini with OS 10.7.5 and an Acer H243HX monitor (w/ HDMI, USB). I can get the webcam-in , but even with settings in Sounds set to have the input come through the Acer monitor, I still cannot get any sound input into the Mac. Any suggestions or ideas? Thanks!

Im using an iMic to record but now it all of a sudden won't pick up anything played through it, yet if i turn on garageband it works. logic pro does acknowledge that the imic is plugged in but still won't pick up any sound, even with audio input : imic

Im using an iMic to record but now it all of a sudden won't pick up anything played through it, yet if i turn on garageband it works. logic pro does acknowledge that the imic is plugged in but still won't pick up any sound, even with audio input : imic and audio output : external speakers. is this just logic pro not working properly?

Same problem - happened after recent logic update.

Problem with Sound in iPhone 4

REcently my iPhone 4 8GB is behaving strangely with sounds. I regularly use the mute button to silent the phone at my workplace. The phone remains on mute even after unmuting it from the side button. Then after sometime it automatically comes back. This is going on and on. Any solutions?

Maybe the switch isn't functioning properly. Take it to the Apple Store (make an appointment first) to have it checked.

Static nat with port redirection 8.3 access-list using un-nat port?

I am having difficulty following the logic of the port-translation and hoping someone can shed some light on it. Here is the configuration on a 5505 with 8.3
object network obj-10.1.1.5-06
nat (inside,outside) static interface service tcp 3389 3398
object network obj-10.1.1.5-06
host 10.1.1.5
access-list outside_access_in line 1 extended permit tcp any any eq 3389 (hitcnt=3)
access-group outside_access_in in interface outside
So I would have thought the outside access-list should reference the 'mapped' port but even with 3398 open I cannot remote desktop to the host. If I open 3389 then I can connect successfully. What gives?
Thanks in advance..

Hello,
I would be more than glad to explain you what is going on!
The thing is since 8.3 NAT is reviewed before the acl so, the ASA receives the packet on the outside interface, checks for a existing connection, if there is none it will un-nat the packet and then check the ACL.
After the packet in un-natted what we have is the private ip addresses and the real ports. so that is why on this versions you got to point the ACL to the private ip addresses and ports.
Regards,
Julio
Rate helpful posts

Still no full retina support, even with the new CC Apps?

Hello over there!
I just bought the full CC abo, after trying PS and Indesign and becoming a fan of the new workflow, that is possible with the upcoming new CC Apps (Muse, Edge Tools...).
Now, after getting things right and downloading the needed Apps to my Macbook Pro (15" Retina) - I was very disappointed. The updated CC version of Dreamweaver and even some of the completely new Apps still have blurry text fields and buttons/layout graphics in it. Acrobat Pro XI is still a laggy, blurry fail on retina. The Mac OS Preview is sharp and scrolls a 600 pages PDF in seconds.
I mean... Srsly? This would be okay if the retina MBP came out last month. But it came last year. I'm really a big fan of the Adobe workflow and functionality, this is why I upgraded and decided to spend some hundreds of dollars for it ( and become friends with the new and scary rent model ). But the best program is a pain, when your eyes start being overly stressed after 20 minutes of work, especially when you're already looking at hundres of code lines (And I'm 21 years old, so I'm glad to still have those good working eyes..). I remember when I fell totally in love with Dreamweaver because it was able to handle the amount of information in a good stucturized and clearly visible way. But the only really sharp and "look like it fits all together"-Apps are PS, AI and ID as far as I tried for now.
Definitely affected are: DW, Muse, Edge Animate and Reflow (What? They are new!?)
So, thats my question: Are there any official statements that this will be fixed? Im confused because Adobe is just partying about the retina-compatibility updates last fall/winter in blogs and descriptions. The blurry App elements are not mentioned. I really want to know this, to be able to take back my contract and abo in time and get a refund. Would be sad, but the only option to me.
Thanks very much for reading and helping in advance. I really do not want to troll or sound agressive. The Adobe Suite is a very very big product and it does very good. But I'm simply disappointed about the handling of retina support, which is essential for users like me.
English is not my main language, I hope everything was clear.
Best regards,
D. Fuchs

Hi David,
thank you for your effort. If I remember correctly you said you’ll also hand through this issue/question to the tech guys. Does this mean I’ll get further information? Because this article you found is about 10 month old and I’d like to get this issue verified.
Furthermore, Acrobat (XI) is not even mentioned in that article and this is what brings the most problems.
I really don’t like to be a stressing customer, but I think a official answer to this issue is definitely possible und should be made.
I’ll attach a few hardcopy pictures of the issue. Don’t know if it helps, but it proofs.
Thanks again and best regards,
D. Fuchs
Am 25.06.2013 um 01:17 schrieb David__B <[email protected]>:
Re: Still no full retina support, even with the new CC Apps?
created by David__B in Adobe Creative Cloud - View the full discussion
Hi D.
I found this http://blogs.adobe.com/creativelayer/new-macbook-pro-retina-display-su pport/
I believe has been added to Photoshop, Illustrator and Lightroom so far. Hopefully it will be added to Dreamweaver soon too.
Kind regards,
-Dave
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5445698#5445698
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5445698#5445698
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5445698#5445698. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Creative Cloud by email or at Adobe Community
For more information about maintaining your forum email notifications please go tohttp://forums.adobe.com/message/2936746#2936746.

Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

Some progess I see. To be honest, i would not waste your time with trying to connect using wireless.
You are likely to get poor connections and dropping out.
If its working using a cable, then there is no need to bother with giving me the network settings, bu see how it goes, because sometimes giving the TV a static IP address can give better results.
There is an example of a couple of powerline adapters on the diagram below. Just ignore the network switch unless you want to connect other devices which are near to the TV.
http://forumhelp.dyndns.info/networking/powerline3.jpg
I will monitor the subject line of this thread, should you want to post any more information.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Just how on earth do you get menu transitions with sound to work???

I've tried importing them as DVD compliant MPEG-2s (audio and video multiplexed) made with Main Concept and also tried importing them as AVIs.
Encore seems incapable of transcoding either. Yes, it does try to transcode the MPEG-2s even though I've asked it not to. It seems that even DVD compliant files must be transcoded when used as transitions. It doesn't try to transcode motion menu or timeline MPEG-2s created in exactly the same way.
Can someone tell me exactly what Encore requires me to import to get working transitions with sound? Exact format, sound resolution, number of channels, bitrate, file type, etc. Is there a minimum length for transitions? Mine are 1 second long - they're just the transition flipping from page to page in a notebook.
Is there something else I'm missing or is Encore just not capable of doing this?
I think I'm going to have to just scrap the transitions otherwise :(
Thanks

One second is awfully short for an MPEG video clip. You're really challenging the MPEG decoder on the playback device. And if you're using .ac3 audio, it can take up to 2 seconds for the AC3 decoder on a hardware or software DVD player to lock on to the audio stream. Dolby themselves recommend 2 seconds of audio "black" at the beginning of an .ac3 soundtrack.
So - try lengthening the transition; or use PCM audio in your project instead of .ac3. Unfortunately, the PCM audio route leads to less space on the disc for your video.

Bug in rendering static list with Hierarchical Expanding template?

Hi,
on http://apex.oracle.com/pls/apex/f?p=23910 I prepared test case for my problem. It is static list with template Hierarchical Expanding and following structure:
1
  1.1
    1.1.1
  1.2
    1.2.1
2
Entry 1.2 has condition set to never. And the problem is, as you can see, that entry 2 seems to be under entry 1.1. But really it isn't. Reason of this strange look is that in some cases, when condition for last entry in sublist is evaluted as false, there isn't generated tag </ul> closing that sublist, in this case are not closed even two sublists - under entries 1 and 1.1.
In my real application it is more complicated, I have static list with about 80 entries (report menu) and every user sees some reports based on his position in organization structure and other conditions. And as you can imagine, this bug produces really confusing results, almost unique for every user.
Did anybody meet this problem too? We are on ApEx 4.1.0, it is present in 4.1.1 too (as seen on apex.oracle.com)... And I think it wasn't problem in 4.0 (at least nobody noticed for few months and I believe somebody would notice that reports for one department are under reports for another one). Used theme is standard theme 2 - Builder Blue.
Jirka

update:
I tried deriving the full path for the image file by viewing the source when I embedded it in an HTML region on the same page and it gives me something similar to the following URL:
wwv_flow_file_mgr.get_file?p_security_group_id=502133210878128108&p_fname=myImage.gif
(p.s. it is a .gif file - not sure if this should make any material difference)
As a result, I tried embedding this into the code:
<fo:block>
<fo:external-graphic src="wwv_flow_file_mgr.get_file?p_security_group_id=502133210878128108&p_fname=myImage.gif)"/>
</fo:block>
but this time, instead of merely not rendering, when Acrobat opens, an error message appeared reported that the file was corrupted or invalid. When trying different formats, I seem to get a generic: "500 Internal Server Error".
I'm going to try putting the image file in the server directory tree to see if that will work. I'll post later either way.

September 2011 MacBookAir4,2 1.7 GHz White noise even when sound turned off

Since new this MacAir has had a white noise like a tv not tuned in even when sound is off. Gets worse as it gets warmer. Seems to be getting worse then ever.(summer). Usually connected to a Thunderbolt Display and makes noise only when display is attached. Disconnect the display and the noise goes quite after a few minutes till display is again attached.
Mountain Lion OS X 10.8.2 (12C60)
I think it is the Cooling Fans making the noise and the Thunderbolt connector gets hot after a few minutes.
Rom Ver MBA41.0077.B0F
Regards
Barry

Hello and Welcome to Apple Discussions.
Try checking the hard disk for errors just in case.
Open Disk Utility, in the Utilities folder in the Applications folder.
Insert your Mac OS X Install disc in your computer’s optical drive or an optical drive connected to your computer, and then restart your computer. When you hear the startup tone, hold down the C key until you see the progress indicator, which looks like a spinning gear.
Follow the onscreen instructions until the menu bar appears with the Utilities menu in it, choose Utilities > Disk Utility, click First Aid, and then click Verify. Of Disk Utility reports errors, click Repair. When it's finished, from the Menu Bar, select Utilities/Startup Disk. In the Startup Disk window select MacintoshHD 10.x.x and click Restart.
Also, while you have Disk Utility open, Repair Disk Permissions, reboot and see if the sound anomaly still exists.
Carolyn

TS2034 video doesn't keep up with sound

I have downloaded videos from my i phone onto my i mac. The sound is coming through good, but the video itself is choppy and doesn't keep up with the sound.. Any ideas?

Your issue is similar to mine. I posted it differently however. I noticed that timeline scrubbing behaves the same as yours when audio scrubbing is enabled.
As a test turn off the audio scrubbing feature under the audio tab in preferences. If you experiencing the same problem as mine then the timeline will respond very quickly displaying everyframe. As long as you dont need to hear the audio when scrubbing that would solve your present dilemma.
I also found that there seems to be a bottleneck using an external media drive. I copied a file that was performing slow to my internal SATA system drive, put it on the timeline and it scrubs perfectly even with audio scrubbing enabled.
This same external drive performed fine on a slower PC with Premiere Pro 2.0. I am about to add an internal 1 terabyte SATA drive as my media drive. If I am correct this will resolve my problem.
By the way, I am using a 7200 RPM external drive with a firewire connection. If you are using a USB 2 cable your bottleneck would probably be greater. I'll leave an update if the new internal drive does the trick.

I cannot play music with my slideshows. I setup the music but it does not play, even with my older slideshows I hear no music.

I cannot play music with my slideshows. I setup the music but it does not play, even with my older slideshows I hear no music.

This category is for iPod shuffle. Is that the type of iPod you have, because your description of the problem does not sound like it's about a shuffle? If it's not a shuffle, what is the iPod model...?
There is music there and I can play it connected to laptop.
Are you doing the playing using the iPod, or are you playing the music using iTunes on the laptop?
All mucis icons read "No music" and this is not correct
Do these icons with "No music" appear on the laptop's screen, or on the iPod's screen

Static even with sound suppression on

Similar Messages

Maybe you are looking for