Static information to be added in  message header of the XI message  in JMS

Hi Friends ,
Is it possible to add some customer specific internal information to message header of the XI message in PI 7.1 level.. If so how ?
customer wants to add some info and to verify whether it would be handled in PI itself or not..
Business case :  SAP -
> PI7.1 -
> IBM MQ
All inputs will be appreciated .
Thanks.,
V.Rangarajan

Hi preetak ,
Thanks for your info .Since i have not worked on JMS adapter
As per the Link it says as follows
If you want to set additional JMS message attributes, select Specify Additional JMS Message Properties (10 Maximum).
·        In the table, enter the Name and Java Type of the JMS message properties whose values are to be included in the message header of the XI message.
Under Java Type, you define the JMS Java message type for the attribute in the created JMS message. The following are possible entries:
boolean , init , String etc.,
Question
1. How to pass the value to this parameter  will it be XML file with parameter name and value ?
2. Any other blogs to refer ?
Thanks .,
V.Rangarajan

Similar Messages

  • Adding a authentication Header in the Envelope Header of SOAP Request

    Hi Experts,
                       I want to send an authentication header as the Envelope header of the SOAP Request as follows.
    <env:Header>
              <AuthHeader>
                   <Id>MyOemId</Id>
                   <Password>MyOemPassword</Password>
                   <Domain>MyDomain</Domain>
                   <UId>MyUserId</UId>
                   <UPassword>MyPassword</UPassword>
              </AuthHeader>
    </env:Header>
    <env:Body>
    </env:Body>
    If I include this as part of my Source XI message then it will go as a payload which is not the requirement.
    Any suggestions for this?
    Thanks
    Ajay

    If I include this as part of my Source XI message then it will go as a payload
    Try using the "Keep Header" parameter at soap sender communication channel.
    Regards,
    Prateek

  • I bought an Adobe writer program a few years ago, and have had no problem saving information I've added to pdf forms.  For some reason, I can no longer save the information that I enter.on the form.  In fact, I get a message that the information will NOT

    I bought an Adobe writer program a few years ago,and have have had no problem saving information I've added to pdf forms.  For some reason, I can no longer save the information that I've entered.  In fact, I get a message that the information will NOT be saved.  How can I correct this?  Thanks!

    Hey louiseg45826294,
    Thank you for posting on Adobe forums.
    Could you please let me know what Adobe Writer program you are talking about. Is it Adobe Acrobat or Reader?
    Could you please share the screenshot of the exact error message that appears.
    Are the PDF forms saved on your computer's local drive?
    Hope to hear from you.
    Regards,
    Anubha

  • Time Machine error message while restoring..."an error occurred while adding a recovery system to the destination disk

    I had to change my hard drive in my MBP 15".  I use Time Machine on a Time Capsule for backup.  I am booting up my laptop with a bootable USB key.  I have partitioned my new hard drive (bigger than the old one) and named it Macintosh HD (same as the old one).  I select the option to restore from Time Machine Backup.  I select one of my latest backup....select my destination drive...the restore process starts but stop within minutes with the following message.  "An error occurred while adding a recovery system to the destination disk"  It then prompts me to restart....
    I need your help...what can it be.
    Thanks

    I've encountered this issue when the Time Machine was encrypted with FileVault.
    Article:  HT4718
    Additional Information
    Please note that OS X Recovery must be present on the computer's startup volume in order to use FileVault 2. Using RAID partitions or a non-standard Boot Camp partition on the startup disk may prevent OS X from installing a local Recovery system. See "OS X: Some features of Mac OS X are not supported for the disk (volume name)" for more information.
    What seems to work, is reinstalling the OSX from the internet, and then using migration assistant to pull the user from the time machine backup external when logged into a temporary administrator user to move the original user back over.
    Perhaps if you're stubborn, what would work is the following from the same article:
    What to do if the installer warns that no Recovery System can be created
    Some disk partition configurations may result in the OS X installer reporting that it could not create a Recovery System. In these situations, even if you are permitted to continue the install, you may want to quit the installation and create an external, bootable OS X hard drive with a Recovery System, first. You can continue your OS X upgrade on your computer's startup drive after creating an external Recovery System.
    Your storage device must have at least 13 GB available (after formatting) to install OS X Lion or later and a Recovery partition.
    These steps erase and reformat the storage device. This article instructs you on setting up a storage device to use the GUID partition scheme and the Mac OS Extended (Journaled) format, which are required to install OS X and a Recovery partition on your external storage device. You should back up any important files that are on the device to a different drive.
    This procedure installs a version of OS X that is compatible with the Mac it was created with. Using this OS X system with a different Mac model may produce unpredictable results.
    Your computer's serial number is sent to Apple as part of this process to help authenticate your request to download and install OS X Lion.
    All of this information was collected by browsing through the public articles on the Apple Support website.

  • [svn:fx-4.x] 14699: Adding pop up children to the end of automation children array so that index of static children do not change due to these dynamic children .

    Revision: 14699
    Revision: 14699
    Author:   [email protected]
    Date:     2010-03-11 06:20:06 -0800 (Thu, 11 Mar 2010)
    Log Message:
    Adding pop up children to the end of automation children array so that index of static children do not change due to these dynamic children.
    QE notes:
    Doc notes:
    Bugs: FLEXENT-1248, FLEXENT-1250, FLEXENT-1253
    Reviewer:
    Tests run: checkintests
    Is noteworthy for integration:
    Ticket Links:
        http://bugs.adobe.com/jira/browse/FLEXENT-1248
        http://bugs.adobe.com/jira/browse/FLEXENT-1250
        http://bugs.adobe.com/jira/browse/FLEXENT-1253
    Modified Paths:
        flex/sdk/branches/4.x/frameworks/projects/automation/src/mx/automation/delegates/containe rs/ApplicationAutomationImpl.as
        flex/sdk/branches/4.x/frameworks/projects/automation_spark/src/spark/automation/delegates /components/SparkApplicationAutomationImpl.as

    Revision: 14699
    Revision: 14699
    Author:   [email protected]
    Date:     2010-03-11 06:20:06 -0800 (Thu, 11 Mar 2010)
    Log Message:
    Adding pop up children to the end of automation children array so that index of static children do not change due to these dynamic children.
    QE notes:
    Doc notes:
    Bugs: FLEXENT-1248, FLEXENT-1250, FLEXENT-1253
    Reviewer:
    Tests run: checkintests
    Is noteworthy for integration:
    Ticket Links:
        http://bugs.adobe.com/jira/browse/FLEXENT-1248
        http://bugs.adobe.com/jira/browse/FLEXENT-1250
        http://bugs.adobe.com/jira/browse/FLEXENT-1253
    Modified Paths:
        flex/sdk/branches/4.x/frameworks/projects/automation/src/mx/automation/delegates/containe rs/ApplicationAutomationImpl.as
        flex/sdk/branches/4.x/frameworks/projects/automation_spark/src/spark/automation/delegates /components/SparkApplicationAutomationImpl.as

  • Adding additional XML Header in Target XML structure

    Hi all,
    I have a requirement that i need add one additional XML header to target XML messages. At the moment i can see default XML header as ,
    <?xml version="1.0" encoding="UTF-8" ?>
    <Test>
    <Add>Test Mesage</Add>
    </Test>
    But i would like to have one more additional header like below,
    <?xml version="1.0" encoding="UTF-8" ?>
    <?Siebel-Property-Set EscapeNames="false"?>
    <Test>
    <Add>Test Mesage</Add>
    </Test>
    Can some one help me to find a way to adding this additional header?
    Thanks in advance.
    Prasad Babu.

    Hi Prasad,
    Yes it is possible by Java Mapping. Please check my response for similar thread
    Re: Add XML header?

  • I've tried downloading iOS5 several times and after an hour each time I get a message that says my network connection has timed out.  But I can't find any information about "timing out" or how to correct the situation.  Any help?

    I've tried downloading iOS5 several times and after an hour each time I get a message that says my network connection has timed out.  But I can't find any information about "timing out" or how to correct the situation.  Any help?

    Disable your antivirus and firewall, and try again.

  • Error whil adding Header to the ALV grid using OO

    Hi Guys,
                 I want to display the Header for the ALV grid using Splitter .
    when i am doing like that .I am getting  a screen on the top of that screen I am getting a EMPTY screen .I don't know why likat.
    What i need is just to display a Grid with header?Can anybody Please help me reagarding this problem.
    the Code is Below.
    *& Report  Z_TEST_PGM
    REPORT  Z_TEST_PGM NO STANDARD PAGE HEADING
                                      LINE-SIZE 120 MESSAGE-ID zotc.
    Tables : CKMLMV003 , CKMLMV001.
    TYPE-POOLS: slis.
    Types : Begin of t_CKMLMV003_out,
                 WERKS type CKMLMV003-WERKS,
                 MATNR type CKMLMV003-MATNR,
                 MISCH_VERH type CKMLMV003-MISCH_VERH,
                 KALNR_BAL type CKMLMV003-KALNR_BAL,
                 GJAHR type CKMLMV003-GJAHR,
                 PERIO type CKMLMV003-PERIO,
                 MGTYP type CKMLMV003-MGTYP,
            End of t_CKMLMV003_out,
            Begin of t_CKMLMV001_out,
                 MATNR type CKMLMV001-MATNR,
                 KALNR type CKMLMV001-KALNR,
                 LIFNR_ND type CKMLMV001-LIFNR_ND,
                 EKORG_ND type CKMLMV001-EKORG_ND,
            End of t_CKMLMV001_out,
            Begin of t_CKMLMV003_Temp,
                 MATNR type CKMLMV003-MATNR,
                 GJAHR type CKMLMV003-GJAHR,
                 PERIO type CKMLMV003-PERIO,
            End of t_CKMLMV003_Temp,
            Begin of t_Final_out,
                 MATNR type CKMLMV003-MATNR,
                 GJAHR type CKMLMV003-GJAHR,
                 PERIO type CKMLMV003-PERIO,
                 WERKS type CKMLMV003-WERKS,
                 LIFNR_ND1 type CKMLMV001-LIFNR_ND,
                 MISCH_VERH1 type CKMLMV003-MISCH_VERH,
                 LIFNR_ND2 type CKMLMV001-LIFNR_ND,
                 MISCH_VERH2 type CKMLMV003-MISCH_VERH,
                 LIFNR_ND3 type CKMLMV001-LIFNR_ND,
                 MISCH_VERH3 type CKMLMV003-MISCH_VERH,
                 LIFNR_ND4 type CKMLMV001-LIFNR_ND,
                 MISCH_VERH4 type CKMLMV003-MISCH_VERH,
                 LIFNR_ND5 type CKMLMV001-LIFNR_ND,
                 MISCH_VERH5 type CKMLMV003-MISCH_VERH,
                 LIFNR_ND6 type CKMLMV001-LIFNR_ND,
                 MISCH_VERH6 type CKMLMV003-MISCH_VERH,
                 LIFNR_ND7 type CKMLMV001-LIFNR_ND,
                 MISCH_VERH7 type CKMLMV003-MISCH_VERH,
                 LIFNR_ND8 type CKMLMV001-LIFNR_ND,
                 MISCH_VERH8 type CKMLMV003-MISCH_VERH,
                 LIFNR_ND9 type CKMLMV001-LIFNR_ND,
                 MISCH_VERH9 type CKMLMV003-MISCH_VERH,
                 LIFNR_ND10 type CKMLMV001-LIFNR_ND,
                 MISCH_VERH10 type CKMLMV003-MISCH_VERH,
                 LIFNR_ND11 type CKMLMV001-LIFNR_ND,
                 MISCH_VERH11 type CKMLMV003-MISCH_VERH,
                 LIFNR_ND12 type CKMLMV001-LIFNR_ND,
                 MISCH_VERH12 type CKMLMV003-MISCH_VERH,
                 LIFNR_ND13 type CKMLMV001-LIFNR_ND,
                 MISCH_VERH13 type CKMLMV003-MISCH_VERH,
             End of t_Final_out,
           Begin of t_Final_out1,
                 MATNR type CKMLMV003-MATNR,
                 GJAHR type CKMLMV003-GJAHR,
                 PERIO type CKMLMV003-PERIO,
                 LIFNR_ND1 type CKMLMV001-LIFNR_ND,
                 MISCH_VERH1 type CKMLMV003-MISCH_VERH,
                 LIFNR_ND2 type CKMLMV001-LIFNR_ND,
                 MISCH_VERH2 type CKMLMV003-MISCH_VERH,
                 LIFNR_ND3 type CKMLMV001-LIFNR_ND,
                 MISCH_VERH3 type CKMLMV003-MISCH_VERH,
                 LIFNR_ND4 type CKMLMV001-LIFNR_ND,
                 MISCH_VERH4 type CKMLMV003-MISCH_VERH,
                 LIFNR_ND5 type CKMLMV001-LIFNR_ND,
                 MISCH_VERH5 type CKMLMV003-MISCH_VERH,
                 LIFNR_ND6 type CKMLMV001-LIFNR_ND,
                 MISCH_VERH6 type CKMLMV003-MISCH_VERH,
                 LIFNR_ND7 type CKMLMV001-LIFNR_ND,
                 MISCH_VERH7 type CKMLMV003-MISCH_VERH,
                 LIFNR_ND8 type CKMLMV001-LIFNR_ND,
                 MISCH_VERH8 type CKMLMV003-MISCH_VERH,
                 LIFNR_ND9 type CKMLMV001-LIFNR_ND,
                 MISCH_VERH9 type CKMLMV003-MISCH_VERH,
                 LIFNR_ND10 type CKMLMV001-LIFNR_ND,
                 MISCH_VERH10 type CKMLMV003-MISCH_VERH,
                 LIFNR_ND11 type CKMLMV001-LIFNR_ND,
                 MISCH_VERH11 type CKMLMV003-MISCH_VERH,
                 LIFNR_ND12 type CKMLMV001-LIFNR_ND,
                 MISCH_VERH12 type CKMLMV003-MISCH_VERH,
                 LIFNR_ND13 type CKMLMV001-LIFNR_ND,
                 MISCH_VERH13 type CKMLMV003-MISCH_VERH,
             End of t_Final_out1.
                          Global Structures                              *
    Data : i_CKMLMV003_str   type   t_CKMLMV003_out,
           i_CKMLMV001_str   type   t_CKMLMV001_out,
           i_Final_str   type  t_Final_out,
           i_Final_str1   type  t_Final_out,
           i_CKMLMV003_Temp type   t_CKMLMV003_Temp.
                              Global Internal Tables                        *
    Data : i_CKMLMV003_out   type standard table of  t_CKMLMV003_out,
           i_CKMLMV001_out  type standard table of  t_CKMLMV001_out,
           i_Final_out   type standard table of  t_Final_out,
           i_Final_out1   type standard table of  t_Final_out.
    ALV Report Internal tables    *
    DATA : t_fieldcatalog TYPE slis_t_fieldcat_alv,
           s_fieldcatalog TYPE slis_fieldcat_alv,
           t_basic_fieldcatalog TYPE slis_t_fieldcat_alv,
           s_basic_fieldcatalog TYPE slis_fieldcat_alv,
           t_sort  TYPE slis_t_sortinfo_alv,
           v_repid TYPE sy-repid.
    *ALV Header declarations
    Data: t_header type slis_t_listheader,
          i_header_str type slis_listheader,
          i_line_event_str TYPE slis_alv_event,
          i_events TYPE slis_t_event,
          wa_layout  type slis_layout_alv.
    Data : grid1 type ref to cl_gui_alv_grid,
           g_custom_container1 type ref to cl_gui_custom_container,
           grid2 type ref to cl_gui_alv_grid,
           g_custom_container2 type ref to cl_gui_custom_container,
           i_FCAT TYPE  LVC_T_FCAT,
           i_FCAT_str type lvc_s_fcat,
    Structure  for layout
          i_layout_s   TYPE  lvc_s_layo,
           gt_final1 type table of  t_Final_out.
    DATA: CCCONTAINER1 TYPE SCRFNAME VALUE 'CCCONTAINER1',
          CCCONTAINER2 TYPE SCRFNAME VALUE 'CCCONTAINER2',
          G_PARENT_TOP TYPE REF TO CL_GUI_CONTAINER ,
          G_SPLITTER   TYPE REF TO CL_GUI_SPLITTER_CONTAINER,
          G_DYNDOC_ID  TYPE REF TO CL_DD_DOCUMENT,
          G_PARENT_GRID TYPE REF TO CL_GUI_CONTAINER.
                          Global Variables                              *
    Data :cnt(4) type n value '0',
          g_plant type CKMLMV003-WERKS ,
          g_QuanTStr type CKMLMV003-MGTYP ,
          g_PurchOrg type CKMLMV001-EKORG_ND,
          flag type n value '0',
          g_cnt6 type n value '0',
          g_cnt7 type n value '0',
          g_cnt8 type n value '0',
          g_cnt9 type n value '0',
          g_cnt10 type n value '0',
          g_cnt11 type n value '0',
          g_cnt12 type n value '0',
          g_cnt13 type n value '0'.
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-011.
    SELECTION-SCREEN: BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) TEXT-006 for field s_matnr.
    Select-Options : S_MATNR for CKMLMV003-MATNR .
    SELECTION-SCREEN: END OF LINE.
    SELECTION-SCREEN: BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) TEXT-007 for field S_WERKS.
    SELECT-OPTIONS:S_WERKS for CKMLMV003-WERKS Default '2003'.
    SELECTION-SCREEN: END OF LINE.
    SELECTION-SCREEN: BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) TEXT-008 for field S_GJAHR.
    SELECT-OPTIONS:S_GJAHR for CKMLMv003-GJAHR default Sy-DATUM(4) .
    SELECTION-SCREEN: END OF LINE.
    SELECTION-SCREEN: BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) TEXT-009 for field S_PERIO.
    SELECT-OPTIONS:S_PERIO for CKMLMV003-PERIO .
    SELECTION-SCREEN: END OF LINE.
    SELECTION-SCREEN: BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(25) TEXT-010 for field P_MGTYP.
    Parameters : P_MGTYP type CKMLMV003-MGTYP .
    SELECTION-SCREEN: END OF LINE.
    SELECTION-SCREEN END OF BLOCK b1 .
    At Selection-Screen on s_matnr .
      Perform Validate_MatNumber.
    At Selection-Screen on s_werks .
      Perform Validate_CostingPlant.
    At Selection-Screen on s_GJAHR .
      Perform Validate_FiscalYear.
    At Selection-Screen on s_PERIO .
      Perform Validate_Period.
    At Selection-Screen on p_MGTYP .
      Perform Validate_QuantityStrType.
    *&      Form  Validate_MatNumber
          text
    Form Validate_MatNumber.
      DATA l_MATNR TYPE CKMLMV003-MATNR.
      IF NOT S_MATNR[] IS INITIAL .
        CLEAR L_MATNR.
        SELECT  single MATNR FROM CKMLMV003
          INTO l_MATNR
          WHERE MATNR = s_MATNR-LOW or MATNR = s_MATNR-HIGH.
       ENDSELECT.
        IF sy-subrc NE 0.
          MESSAGE e999 WITH
                  'Enter a Valid Material Number'(001).
        ENDIF.
      ENDIF.
    ENDFORM.                    "Validate_MatNumber
    *&      Form  Validate_CostingPlant
          text
    Form Validate_CostingPlant.
      DATA l_werks TYPE CKMLMV003-WERKS.
      IF NOT S_WERKS[] IS INITIAL .
        CLEAR L_WERKS.
        SELECT single  WERKS FROM T001W
          INTO l_WERKS
          WHERE WERKS =  s_WERKS-low or  WERKS =  s_WERKS-high.
       ENDSELECT.
        IF sy-subrc NE 0.
          MESSAGE e999 WITH
                  'Enter a Valid Costing Plant'(002).
        ENDIF.
      ENDIF.
    ENDFORM.                    "Validate_CostingPlant
    *&      Form  Validate_FiscalYear
          text
    Form Validate_FiscalYear.
      DATA l_GJAHR TYPE CKMLMV003-GJAHR.
      IF NOT S_GJAHR-low IS INITIAL or S_GJAHR-high IS INITIAL.
        CLEAR L_GJAHR.
       SELECT SINGLE GJAHR FROM CKMLMV003
         INTO l_GJAHR
         WHERE GJAHR LE sy-DATUM(4) .
       IF NOT S_GJAHR-low LE sy-DATUM(4) or S_GJAHR-high LE sy-DATUM(4).
         MESSAGE e999 WITH
                 'Enter a Valid Fiscal year'(003).
       ENDIF.
      ENDIF.
    ENDFORM.                    "Validate_FiscalYear
    *&      Form  Validate_Period
          text
    Form Validate_Period.
      DATA l_PERIO TYPE CKMLMV003-PERIO.
      IF NOT S_PERIO[] IS INITIAL .
        CLEAR L_PERIO.
        SELECT single PERIO FROM CKMLMV003
          INTO l_PERIO
          WHERE PERIO GE 1 and PERIO LE 12 .
       ENDSELECT.
        IF sy-subrc NE 0.
          MESSAGE e999 WITH
                  'Enter a Valid Period'(004).
        ENDIF.
      ENDIF.
    ENDFORM.                    "Validate_Period
    *&      Form  Validate_QuantityStrType
          text
    Form Validate_QuantityStrType.
      DATA l_MGTYP TYPE CKMLMV003-MGTYP.
      IF NOT p_MGTYP IS INITIAL.
        CLEAR L_MGTYP.
        SELECT SINGLE MGTYP FROM CKMLMV003
          INTO l_MGTYP
          WHERE MGTYP = p_MGTYP .
        IF sy-subrc NE 0.
          MESSAGE e999 WITH
                  'Enter a Valid Quantity Structure Type'(005).
        ENDIF.
      ENDIF.
    ENDFORM.                    "Validate_QuantityStrType
    INITIALIZATION of Fields
    Class LCL_EVENT_HANDLER DEFINITION.
      Public section.
        Methods:
        TOP_OF_PAGE for Event TOP_OF_PAGE OF CL_GUI_ALV_GRID
                                IMPORTING E_DYNDOC_ID.
    ENDCLASS.                    "LCL_EVENT_HANDLER DEFINITION
    CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
    METHOD TOP_OF_PAGE.
    Top-of-page event <br />
    PERFORM EVENT_TOP_OF_PAGE USING G_DYNDOC_ID.
    ENDMETHOD.                            "top_of_page
    ENDCLASS.       "LCL_EVENT_HANDLER IMPLEMENTATION
    Data : G_HANDLER TYPE REF TO LCL_EVENT_HANDLER.
    Initialization.
      v_repid = sy-repid.
    Start-of-Selection.
      Perform get_CKMLMV003.
      Perform get_CKMLMV001.
      Perform Get_Finaldata.
    Perform Layout_FieldCatalog.
      call screen '101'.
    Perform  ALVGrid_Final_Display.
    *&      Form  Layout_FieldCatalog
          text
    Form Layout_FieldCatalog.
      s_fieldcatalog-col_pos = 1.
      s_fieldcatalog-fieldname = 'MATNR'.
      s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
      s_fieldcatalog-seltext_l = Text-024.
      append s_fieldcatalog to t_fieldcatalog.
      clear s_fieldcatalog.
      s_fieldcatalog-col_pos = 2.
      s_fieldcatalog-fieldname = 'GJAHR'.
      s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
      s_fieldcatalog-seltext_l = Text-012.
      append s_fieldcatalog to t_fieldcatalog.
      clear s_fieldcatalog.
      s_fieldcatalog-col_pos = 3.
      s_fieldcatalog-fieldname = 'PERIO'.
      s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
      s_fieldcatalog-seltext_l = Text-013.
      append s_fieldcatalog to t_fieldcatalog.
      clear s_fieldcatalog.
      s_fieldcatalog-col_pos = 4.
      s_fieldcatalog-fieldname = 'WERKS'.
      s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
      s_fieldcatalog-seltext_l = Text-025.
      append s_fieldcatalog to t_fieldcatalog.
      clear s_fieldcatalog.
      s_fieldcatalog-col_pos = 5.
      s_fieldcatalog-fieldname = 'LIFNR_ND1'.
      s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
      s_fieldcatalog-seltext_l = Text-014.
      append s_fieldcatalog to t_fieldcatalog.
      clear s_fieldcatalog.
      s_fieldcatalog-col_pos = 6.
      s_fieldcatalog-fieldname = 'MISCH_VERH1'.
      s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
      s_fieldcatalog-seltext_l = Text-015.
      append s_fieldcatalog to t_fieldcatalog.
      clear s_fieldcatalog.
      s_fieldcatalog-col_pos = 7.
      s_fieldcatalog-fieldname = 'LIFNR_ND2'.
      s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
      s_fieldcatalog-seltext_l = Text-016.
      append s_fieldcatalog to t_fieldcatalog.
      clear s_fieldcatalog.
      s_fieldcatalog-col_pos = 8.
      s_fieldcatalog-fieldname = 'MISCH_VERH2'.
      s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
      s_fieldcatalog-seltext_l = Text-017.
      append s_fieldcatalog to t_fieldcatalog.
      clear s_fieldcatalog.
      s_fieldcatalog-col_pos = 9.
      s_fieldcatalog-fieldname = 'LIFNR_ND3'.
      s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
      s_fieldcatalog-seltext_l = Text-018.
      append s_fieldcatalog to t_fieldcatalog.
      clear s_fieldcatalog.
      s_fieldcatalog-col_pos = 10.
      s_fieldcatalog-fieldname = 'MISCH_VERH3'.
      s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
      s_fieldcatalog-seltext_l = Text-019.
      append s_fieldcatalog to t_fieldcatalog.
      clear s_fieldcatalog.
      s_fieldcatalog-col_pos = 11.
      s_fieldcatalog-fieldname = 'LIFNR_ND4'.
      s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
      s_fieldcatalog-seltext_l = Text-020.
      append s_fieldcatalog to t_fieldcatalog.
      clear s_fieldcatalog.
      s_fieldcatalog-col_pos = 12.
      s_fieldcatalog-fieldname = 'MISCH_VERH4'.
      s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
      s_fieldcatalog-seltext_l = Text-021.
      append s_fieldcatalog to t_fieldcatalog.
      clear s_fieldcatalog.
      s_fieldcatalog-col_pos = 13.
      s_fieldcatalog-fieldname = 'LIFNR_ND5'.
      s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
      s_fieldcatalog-seltext_l = Text-022.
      append s_fieldcatalog to t_fieldcatalog.
      clear s_fieldcatalog.
      s_fieldcatalog-col_pos = 14.
      s_fieldcatalog-fieldname = 'MISCH_VERH5'.
      s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
      s_fieldcatalog-seltext_l = Text-023.
      append s_fieldcatalog to t_fieldcatalog.
      clear s_fieldcatalog.
      if g_cnt6 <> '0'.
        s_fieldcatalog-col_pos = 14.
        s_fieldcatalog-fieldname = 'LIFNR_ND6'.
        s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
       s_fieldcatalog-NO_OUT = 'X'.
        s_fieldcatalog-seltext_l = Text-022.
        append s_fieldcatalog to t_fieldcatalog.
        clear s_fieldcatalog.
        s_fieldcatalog-col_pos = 15.
        s_fieldcatalog-fieldname = 'MISCH_VERH6'.
        s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
       s_fieldcatalog-NO_OUT = 'X'.
        s_fieldcatalog-seltext_l = Text-023.
        append s_fieldcatalog to t_fieldcatalog.
        clear s_fieldcatalog.
      ENDIF.
      if g_cnt7 <> '0'.
        s_fieldcatalog-col_pos = 16.
        s_fieldcatalog-fieldname = 'LIFNR_ND7'.
        s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
       s_fieldcatalog-NO_OUT = 'X'.
        s_fieldcatalog-seltext_l = Text-022.
        append s_fieldcatalog to t_fieldcatalog.
        clear s_fieldcatalog.
        s_fieldcatalog-col_pos = 17.
        s_fieldcatalog-fieldname = 'MISCH_VERH7'.
        s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
       s_fieldcatalog-NO_OUT = 'X'.
        s_fieldcatalog-seltext_l = Text-023.
        append s_fieldcatalog to t_fieldcatalog.
        clear s_fieldcatalog.
      ENDIF.
      if g_cnt8 <> '0'.
        s_fieldcatalog-col_pos = 18.
        s_fieldcatalog-fieldname = 'LIFNR_ND8'.
        s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
       s_fieldcatalog-NO_OUT = 'X'.
        s_fieldcatalog-seltext_l = Text-022.
        append s_fieldcatalog to t_fieldcatalog.
        clear s_fieldcatalog.
        s_fieldcatalog-col_pos = 19.
        s_fieldcatalog-fieldname = 'MISCH_VERH8'.
        s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
       s_fieldcatalog-NO_OUT = 'X'.
        s_fieldcatalog-seltext_l = Text-023.
        append s_fieldcatalog to t_fieldcatalog.
        clear s_fieldcatalog.
      ENDIF.
      if g_cnt9 <> '0'.
        s_fieldcatalog-col_pos = 20.
        s_fieldcatalog-fieldname = 'LIFNR_ND9'.
        s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
       s_fieldcatalog-NO_OUT = 'X'.
        s_fieldcatalog-seltext_l = Text-022.
        append s_fieldcatalog to t_fieldcatalog.
        clear s_fieldcatalog.
        s_fieldcatalog-col_pos = 21.
        s_fieldcatalog-fieldname = 'MISCH_VERH9'.
        s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
       s_fieldcatalog-NO_OUT = 'X'.
        s_fieldcatalog-seltext_l = Text-023.
        append s_fieldcatalog to t_fieldcatalog.
        clear s_fieldcatalog.
      ENDIF.
      if g_cnt10 <> '0'.
        s_fieldcatalog-col_pos = 22.
        s_fieldcatalog-fieldname = 'LIFNR_ND10'.
        s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
       s_fieldcatalog-NO_OUT = 'X'.
        s_fieldcatalog-seltext_l = Text-022.
        append s_fieldcatalog to t_fieldcatalog.
        clear s_fieldcatalog.
        s_fieldcatalog-col_pos = 23.
        s_fieldcatalog-fieldname = 'MISCH_VERH10'.
        s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
       s_fieldcatalog-NO_OUT = 'X'.
        s_fieldcatalog-seltext_l = Text-023.
        append s_fieldcatalog to t_fieldcatalog.
        clear s_fieldcatalog.
      ENDIF.
      if g_cnt11 <> '0'.
        s_fieldcatalog-col_pos = 24.
        s_fieldcatalog-fieldname = 'LIFNR_ND11'.
        s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
       s_fieldcatalog-NO_OUT = 'X'.
        s_fieldcatalog-seltext_l = Text-022.
        append s_fieldcatalog to t_fieldcatalog.
        clear s_fieldcatalog.
        s_fieldcatalog-col_pos = 25.
        s_fieldcatalog-fieldname = 'MISCH_VERH11'.
        s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
       s_fieldcatalog-NO_OUT = 'X'.
        s_fieldcatalog-seltext_l = Text-023.
        append s_fieldcatalog to t_fieldcatalog.
        clear s_fieldcatalog.
      ENDIF.
      if g_cnt12 <> '0'.
        s_fieldcatalog-col_pos = 26.
        s_fieldcatalog-fieldname = 'LIFNR_ND12'.
        s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
       s_fieldcatalog-NO_OUT = 'X'.
        s_fieldcatalog-seltext_l = Text-022.
        append s_fieldcatalog to t_fieldcatalog.
        clear s_fieldcatalog.
        s_fieldcatalog-col_pos = 27.
        s_fieldcatalog-fieldname = 'MISCH_VERH12'.
        s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
       s_fieldcatalog-NO_OUT = 'X'.
        s_fieldcatalog-seltext_l = Text-023.
        append s_fieldcatalog to t_fieldcatalog.
        clear s_fieldcatalog.
      ENDIF.
      if g_cnt13 <> '0'.
        s_fieldcatalog-col_pos = 29.
        s_fieldcatalog-fieldname = 'LIFNR_ND13'.
        s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
       s_fieldcatalog-NO_OUT = 'X'.
        s_fieldcatalog-seltext_l = Text-022.
        append s_fieldcatalog to t_fieldcatalog.
        clear s_fieldcatalog.
        s_fieldcatalog-col_pos = 30.
        s_fieldcatalog-fieldname = 'MISCH_VERH13'.
        s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
       s_fieldcatalog-NO_OUT = 'X'.
        s_fieldcatalog-seltext_l = Text-023.
        append s_fieldcatalog to t_fieldcatalog.
        clear s_fieldcatalog.
      ENDIF.
    ENDFORM.                    "Layout_FieldCatalog
    *&      Form  get_CKMLMV003
          text
    Form get_CKMLMV003.
      Select WERKS
             MATNR
             MISCH_VERH
             KALNR_BAL
             GJAHR
             PERIO
             MGTYP
             from CKMLMV003
             into table i_CKMLMV003_out
             Where ( MATNR in s_MATNR and
                     WERKS in s_WERKS and
                     GJAHR in s_GJAHR and
                     PERIO in s_PERIO and
                     MGTYP = p_MGTYP ).
      Sort i_CKMLMV003_out by MATNR  KALNR_BAL.
    ENDFORM.                    "get_CKMLMV003
    *&      Form  get_CKMLMV001
          text
    Form get_CKMLMV001.
      If Not i_CKMLMV003_out is Initial.
        Select MATNR
               KALNR
               LIFNR_ND
               EKORG_ND
               from CKMLMV001
               into Table i_CKMLMV001_out
               for all entries in i_CKMLMV003_out
               Where ( KALNR = i_CKMLMV003_out-KALNR_BAL
                      and WERKS = i_CKMLMV003_out-WERKS
                      and MATNR = i_CKMLMV003_out-MATNR ).
        sort i_CKMLMV001_out by MATNR  KALNR.
      ENDIF.
    ENDFORM.                    "get_CKMLMV001
    *&      Form  Get_Finaldata
          text
    Form Get_Finaldata.
      Loop at  i_CKMLMV001_out into i_CKMLMV001_str.
        Loop at  i_CKMLMV003_out into i_CKMLMV003_str.
          If ( i_CKMLMV001_str-KALNR = i_CKMLMV003_str-KALNR_BAL  and i_CKMLMV003_str-MATNR = i_CKMLMV001_str-MATNR  ) .
            If ( flag = 0 ).
              g_plant = i_CKMLMV003_str-WERKS.
              g_PurchOrg = i_CKMLMV001_str-EKORG_ND.
              g_quantstr = i_CKMLMV003_str-MGTYP.
              flag = 1.
            ENDIF.
            Move i_CKMLMV003_str-MATNR  to  i_Final_str-MATNR.
            Move i_CKMLMV003_str-WERKS  to  i_Final_str-WERKS.
            Move i_CKMLMV003_str-GJAHR  to  i_Final_str-GJAHR.
            Move i_CKMLMV003_str-PERIO  to  i_Final_str-PERIO.
            Move i_CKMLMV003_str-MISCH_VERH  to  i_Final_str-MISCH_VERH1.
            Move i_CKMLMV001_str-LIFNR_ND  to  i_Final_str-LIFNR_ND1.
           Move-Corresponding i_CKMLMV003_str to i_CKMLMV003_temp.
            Append i_Final_str to i_Final_out.
            Clear : i_CKMLMV003_str   .
          ENDIF.
        ENDLOOP.
        Clear : i_CKMLMV001_str ,  i_Final_str , i_CKMLMV003_temp.
      ENDLOOP.
      Sort i_Final_out by WERKS MATNR GJAHR  PERIO .
      Loop at i_Final_out into i_Final_str.
        if i_Final_str-MATNR = i_Final_str1-MATNR and i_Final_str-GJAHR = i_Final_str1-GJAHR and i_Final_str-PERIO = i_Final_str1-PERIO and i_Final_str-WERKS = i_Final_str1-WERKS.
          cnt = cnt + 1.
          Case cnt.
            When 2.
              Move i_Final_str-MISCH_VERH1  to  i_Final_str1-MISCH_VERH2.
              Move i_Final_str-LIFNR_ND1  to  i_Final_str1-LIFNR_ND2.
            When 3.
              Move i_Final_str-MISCH_VERH1  to  i_Final_str1-MISCH_VERH3.
              Move i_Final_str-LIFNR_ND1  to  i_Final_str1-LIFNR_ND3.
            When 4.
              Move i_Final_str-MISCH_VERH1  to  i_Final_str1-MISCH_VERH4.
              Move i_Final_str-LIFNR_ND1  to  i_Final_str1-LIFNR_ND4.
            When 5.
              Move i_Final_str-MISCH_VERH1  to  i_Final_str1-MISCH_VERH5.
              Move i_Final_str-LIFNR_ND1  to  i_Final_str1-LIFNR_ND5.
            When 6.
              Move i_Final_str-MISCH_VERH1  to  i_Final_str1-MISCH_VERH6.
              Move i_Final_str-LIFNR_ND1  to  i_Final_str1-LIFNR_ND6.
              g_cnt6 = 1.
            When 7.
              Move i_Final_str-MISCH_VERH1  to  i_Final_str1-MISCH_VERH7.
              Move i_Final_str-LIFNR_ND1  to  i_Final_str1-LIFNR_ND7.
              g_cnt7 = 1.
            When 8.
              Move i_Final_str-MISCH_VERH1  to  i_Final_str1-MISCH_VERH8.
              Move i_Final_str-LIFNR_ND1  to  i_Final_str1-LIFNR_ND8.
              g_cnt8 = 1.
            When 9.
              Move i_Final_str-MISCH_VERH1  to  i_Final_str1-MISCH_VERH9.
              Move i_Final_str-LIFNR_ND1  to  i_Final_str1-LIFNR_ND9.
              g_cnt9 = 1.
            When 10.
              Move i_Final_str-MISCH_VERH1  to  i_Final_str1-MISCH_VERH10.
              Move i_Final_str-LIFNR_ND1  to  i_Final_str1-LIFNR_ND10.
              g_cnt10 = 1.
            When 11.
              Move i_Final_str-MISCH_VERH1  to  i_Final_str1-MISCH_VERH11.
              Move i_Final_str-LIFNR_ND1  to  i_Final_str1-LIFNR_ND11.
              g_cnt11 = 1.
            When 12.
              Move i_Final_str-MISCH_VERH1  to  i_Final_str1-MISCH_VERH12.
              Move i_Final_str-LIFNR_ND1  to  i_Final_str1-LIFNR_ND12.
              g_cnt12 = 1.
            When 13.
              Move i_Final_str-MISCH_VERH1  to  i_Final_str1-MISCH_VERH13.
              Move i_Final_str-LIFNR_ND1  to  i_Final_str1-LIFNR_ND13.
              g_cnt13 = 1.
          ENDCASE.
        ELSE.
          if cnt GE 1 .
            append i_Final_str1 to i_Final_out1.
            Clear : i_Final_str1.
          ENDIF.
          Move-Corresponding i_Final_str to i_Final_str1.
          cnt = 0.
          cnt = cnt + 1.
        ENDIF.
        Clear :  i_Final_str.
      Endloop.
      append i_Final_str1 to i_Final_out1.
       if i_Final_str-MATNR = i_Final_str1-MATNR and i_Final_str-GJAHR = i_Final_str1-GJAHR and i_Final_str-PERIO = i_Final_str1-PERIO .
         cnt = cnt + 1.
         Case cnt.
           When 2.
             Move i_Final_str-MISCH_VERH1  to  i_Final_str1-MISCH_VERH2.
             Move i_Final_str-LIFNR_ND1  to  i_Final_str1-LIFNR_ND2.
           When 3.
             Move i_Final_str-MISCH_VERH1  to  i_Final_str1-MISCH_VERH3.
             Move i_Final_str-LIFNR_ND1  to  i_Final_str1-LIFNR_ND3.
           When 4.
             Move i_Final_str-MISCH_VERH1  to  i_Final_str1-MISCH_VERH4.
             Move i_Final_str-LIFNR_ND1  to  i_Final_str1-LIFNR_ND4.
           When 5.
             Move i_Final_str-MISCH_VERH1  to  i_Final_str1-MISCH_VERH5.
             Move i_Final_str-LIFNR_ND1  to  i_Final_str1-LIFNR_ND5.
         ENDCASE.
    **Move-Corresponding i_Final_str to i_Final_str1.
       ELSE.
         if cnt GE 1 .
           append i_Final_str1 to i_Final_out1.
           Clear : i_Final_str1.
         ENDIF.
         Move-Corresponding i_Final_str to i_Final_str1.
         cnt = 0.
         cnt = cnt + 1.
       ENDIF.
       Clear :  i_Final_str.
    Endloop.
    append i_Final_str1 to i_Final_out1.
    ENDFORM.                    "Get_Finaldata
    *&      Form  top_of_page
          text
    Form top_of_page.
      clear t_header.
      refresh t_header.
      i_header_str-typ = 'H'.
      I_header_Str-info = Text-035.
      append I_header_str to t_header.
      clear I_header_str.
    Date
      I_header_str-typ = 'S'.
      I_header_str-key = Text-036.
      CONCATENATE sy-datum+6(2) '.'
      sy-datum+4(2) '.'
      sy-datum(4) INTO I_header_str-info. "todays date
      append I_header_str to t_header.
      clear: I_header_str.
      i_header_str-typ = 'S'.
      I_header_Str-Key = 'Quantity Structure Type :'.
      I_header_Str-info = g_QuantStr.
      append I_header_str to t_header.
      clear I_header_str.
      i_header_str-typ = 'S'.
      I_header_Str-Key = 'Purchase Org :'.
      I_header_Str-info = g_PurchOrg.
      append I_header_str to t_header.
      clear I_header_str.
      i_header_str-typ = 'S'.
      I_header_Str-Key = 'Plant :'.
      I_header_Str-info = g_Plant.
      append I_header_str to t_header.
      clear I_header_str.
      CLEAR i_line_event_str.
      i_line_event_str-name = 'TOP_OF_PAGE'.
      APPEND i_line_event_str TO i_events.
      call function 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          it_list_commentary = t_header.
    i_logo = 'Z_LOGO'.
    ENDFORM.                    "top_of_page
    *&      ALVGrid_Final_Display
    Form ALVGrid_Final_Display.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_callback_program     = v_repid
           i_DEFAULt              = c_valx
          i_callback_top_of_page = 'TOP_OF_PAGE'
           i_Save                 = c_valx
          it_fieldcat            = t_fieldcatalog
           it_sort                = t_sort
          it_events              = I_events
        TABLES
          t_outtab               = i_final_out1.
    ENDFORM.                    "ALVGrid_Final_Display
    *&      Form  ALVGRID_OO_Display
          text
    Form ALVGRID_OO_Display.
      i_FCAT_str-col_pos = 1.
      i_FCAT_str-fieldname = 'MATNR'.
      i_FCAT_str-tabname = 'I_FINAL_OUT1'.
    i_fcat_str-seltext = 'MATERIAL'.
      i_fcat_str-scrtext_m = Text-024.
      append i_FCAT_str to i_FCAT.
      clear i_FCAT_str.
      i_FCAT_str-col_pos = 2.
      i_FCAT_str-fieldname = 'GJAHR'.
      i_FCAT_str-tabname = 'I_FINAL_OUT1'.
      i_fcat_str-scrtext_m = Text-012.
      append i_FCAT_str to i_FCAT.
      clear i_FCAT_str.
      i_FCAT_str-col_pos = 3.
      i_FCAT_str-fieldname = 'PERIO'.
      i_FCAT_str-tabname = 'I_FINAL_OUT1'.
      i_fcat_str-scrtext_m = Text-013.
      append i_FCAT_str to i_FCAT.
      clear i_FCAT_str.
      i_FCAT_str-col_pos = 4.
      i_FCAT_str-fieldname = 'WERKS'.
      i_FCAT_str-tabname = 'I_FINAL_OUT1'.
      i_FCAT_str-scrtext_m = Text-025.
      append i_FCAT_str to i_FCAT.
      clear i_FCAT_str.
      i_FCAT_str-col_pos = 5.
      i_FCAT_str-fieldname = 'LIFNR_ND1'.
      i_FCAT_str-tabname = 'I_FINAL_OUT1'.
      i_fcat_str-scrtext_m = Text-014.
      append i_FCAT_str to i_FCAT.
      clear i_FCAT_str.
      i_FCAT_str-col_pos = 6.
      i_FCAT_str-fieldname = 'MISCH_VERH1'.
      i_FCAT_str-tabname = 'I_FINAL_OUT1'.
      i_FCAT_str-scrtext_m = Text-015.
      append i_FCAT_str to i_FCAT.
      clear i_FCAT_str.
      i_FCAT_str-col_pos = 7.
      i_FCAT_str-fieldname = 'LIFNR_ND2'.
      i_FCAT_str-tabname = 'I_FINAL_OUT1'.
      i_FCAT_str-scrtext_m = Text-016.
      append i_FCAT_str to i_FCAT.
      clear i_FCAT_str.
      i_FCAT_str-col_pos = 8.
      i_FCAT_str-fieldname = 'MISCH_VERH2'.
      i_FCAT_str-tabname = 'I_FINAL_OUT1'.
      i_FCAT_str-scrtext_m = Text-017.
      append i_FCAT_str to i_FCAT.
      clear i_FCAT_str.
      i_FCAT_str-col_pos = 9.
      i_FCAT_str-fieldname = 'LIFNR_ND3'.
      i_FCAT_str-tabname = 'I_FINAL_OUT1'.
      i_FCAT_str-scrtext_m = Text-018.
      append i_FCAT_str to i_FCAT.
      clear i_FCAT_str.
      i_FCAT_str-col_pos = 10.
      i_FCAT_str-fieldname = 'MISCH_VERH3'.
      i_FCAT_str-tabname = 'I_FINAL_OUT1'.
      i_FCAT_str-scrtext_m = Text-019.
      append i_FCAT_str to i_FCAT.
      clear i_FCAT_str.
      i_FCAT_str-col_pos = 11.
      i_FCAT_str-fieldname = 'LIFNR_ND4'.
      i_FCAT_str-tabname = 'I_FINAL_OUT1'.
      i_FCAT_str-scrtext_m = Text-020.
      append i_FCAT_str to i_FCAT.
      clear i_FCAT_str.
      i_FCAT_str-col_pos = 12.
      i_FCAT_str-fieldname = 'MISCH_VERH4'.
      i_FCAT_str-tabname = 'I_FINAL_OUT1'.
      i_FCAT_str-scrtext_m = Text-021.
      append i_FCAT_str to i_FCAT.
      clear i_FCAT_str.
      i_FCAT_str-col_pos = 13.
      i_FCAT_str-fieldname = 'LIFNR_ND5'.
      i_FCAT_str-tabname = 'I_FINAL_OUT1'.
      i_FCAT_str-scrtext_m = Text-022.
      append i_FCAT_str to i_FCAT.
      clear i_FCAT_str.
      i_FCAT_str-col_pos = 14.
      i_FCAT_str-fieldname = 'MISCH_VERH5'.
      i_FCAT_str-tabname = 'I_FINAL_OUT1'.
      i_FCAT_str-scrtext_m = Text-023.
      append i_FCAT_str to i_FCAT.
      clear i_FCAT_str.
       if g_cnt6 <> '0'.
        i_FCAT_str-col_pos = 15.
        i_FCAT_str-fieldname = 'LIFNR_ND6'.
        i_FCAT_str-tabname = 'I_FINAL_OUT1'.
       s_fieldcatalog-NO_OUT = 'X'.
        i_FCAT_str-scrtext_m = Text-022.
        append i_FCAT_str to i_FCAT.
        clear i_FCAT_str.
        i_FCAT_str-col_pos = 16.
        i_FCAT_str-fieldname = 'MISCH_VERH6'.
        i_FCAT_str-tabname = 'I_FINAL_OUT1'.
       s_fieldcatalog-NO_OUT = 'X'.
        i_FCAT_str-scrtext_m = Text-023.
        append i_FCAT_str to i_FCAT.
        clear i_FCAT_str.
      ENDIF.
    *if  not grid1 is Initial.
    If sy-SUBRC = 0.
      Call Method grid1->set_table_for_first_display
        CHANGING
          it_outtab                     = i_final_out1[]
          it_fieldcatalog               = I_FCAT
        EXCEPTIONS
          Invalid_parameter_combination = 1
          program_error                 = 2
          too_many_lines                = 3
          Others                        = 4.
      If sy-subrc <> 0.
      ENDIF.
    CALL METHOD G_DYNDOC_ID->INITIALIZE_DOCUMENT
        EXPORTING
        BACKGROUND_COLOR = CL_DD_AREA=>COL_TEXTAREA.
    Processing events <br />
      CALL METHOD GRID1->LIST_PROCESSING_EVENTS
        EXPORTING
        I_EVENT_NAME = 'TOP_OF_PAGE'
        I_DYNDOC_ID = G_DYNDOC_ID.
    Call Method grid2->set_table_for_first_display
       CHANGING
         it_outtab                     = i_final_out1[]
         it_fieldcatalog               = I_FCAT
       EXCEPTIONS
         Invalid_parameter_combination = 1
         program_error                 = 2
         too_many_lines                = 3
         Others                        = 4.
    If sy-subrc <> 0.
    ENDIF.
       ENDIF.
      ENDIF.
    Endform.                    "ALVGRID_OO_Display
    Form EVENT_TOP_OF_PAGE using  DG_DYNDOC_ID
                          TYPE REF TO CL_DD_DOCUMENT.
    DATA : DL_TEXT(255) TYPE C.
      CALL METHOD DG_DYNDOC_ID->ADD_TEXT
        EXPORTING
        TEXT = 'Flight Details'
        SAP_STYLE = CL_DD_AREA=>HEADING
        SAP_FONTSIZE = CL_DD_AREA=>LARGE
        SAP_COLOR = CL_DD_AREA=>LIST_HEADING_INT.
    Endform.
    *&      Module  STATUS_0101  OUTPUT
          text
    MODULE STATUS_0101 OUTPUT.
    SET PF-STATUS 'xxxxxxxx'.
    SET TITLEBAR 'xxx'.
    SET PF-STATUS 'STATUS'.
    SET TITLEBAR 'TITLE'.
      Create Object G_DYNDOC_ID
            EXPORTING STYLE = 'ALV_GRID'.
      if g_custom_container1 is initial .
        create object g_custom_container1
            Exporting
                Container_name = CCCONTAINER1
            Exceptions
                cntl_error = 1
                cntl_system_error = 2
                create_error = 3
                lifetime_error = 4
                Others = 5.
       Create Object G_SPLITTER
              Exporting PARENT = g_custom_container1.
      CALL METHOD G_SPLITTER->GET_CONTAINER
        EXPORTING
        ROW = 1
        COLUMN = 1
        RECEIVING
        CONTAINER = G_PARENT_TOP.
    *Assigning the Part 2 to GRID
      CALL METHOD G_SPLITTER->GET_CONTAINER
        EXPORTING
        ROW = 2
        COLUMN = 1
        RECEIVING
        CONTAINER = g_parent_grid.

    Hi,
    Check if any event is triggered from the event handler class, upon selection.
    Usually, the events are handled on double click or on hotspot etc.
    Regards,
    Satish Kanteti

  • I upgraded to Mountain Lion (MacbookPro). Now when I open ical I get a popup window with a list I had added to Reminders app with the message 'Your calendar couldn't be refreshed' it won't go away-'delete' is greyed out-can't access calendar! Help!

    I upgraded to Mountain Lion (MacbookPro). Now when I open ical I get a popup window with a list I had added to Reminders app with the message 'Your calendar couldn't be refreshed' i--t won't go away-'delete' is greyed out--can't access calendar! Help!

    I upgraded to Mountain Lion (MacbookPro). Now when I open ical I get a popup window with a list I had added to Reminders app with the message 'Your calendar couldn't be refreshed' i--t won't go away-'delete' is greyed out--can't access calendar! Help!

  • Information about %CAPWAP-3- ERRORLOG messages

    Hello,
    Does anyone know where to find information about CAPWAP-3 messages like these ?
    %CAPWAP-3-ERRORLOG: Failed to send data transfer request.
    %CAPWAP-3-ERRORLOG: Queue already full.
    Thanks in advance.

    I'm with Scott.
    Post the entire bootup process.  This contains vital information than you can surmiss.
    Also post the output to the following commands:
    1.  WLC:  sh sysinfo;
    2.  WLC:  sh time;
    3.  AP:  sh version;
    4.  AP:  sh ip interface brief; and
    5.  AP:  sh inventory

  • Custom fields added on PO header and PO item in ME21n

    hi everybody
    I have added 2 fields on PO header and PO item level in ME21N screen, everything is working fine
    but the issue is that if the Customer Data tab page is not opened at the Header Level, the additional fields in Customer Data tab page at Item Level are not displayed as well
    Does anybody knws why this happens?

    May be i wrongly explained, all the data are getting populated on the screen and in the database tables.
    Its just that if the Customer tab on PO header is not opened, the fields in the Customer tab in PO item level are not getting displayed
    As such, the data are being saved in the tables.
    Its only if the customer tab on header is not opened, the fields in Customer tab in PO item are not displayed.
    Otherwise if PO header customer tab is opened, everything is ok

  • ADF application hangs after  $$added root$$ message in the logs

    Hi ADF Gurus,
    We have an ADF application which freezes after we create a row in a particular VO,
    When debugged in Jdev, the application seems to hang when either of the below log messages appear. Does anybody know what these messages mean? Just hoping for some hint as to where the problem might lie. The table where the new row is added has about 150,000 records in it
    Log messages:
    <PCollNode> <checkForSplit> [50545] $$added root$$ id=-2
    <PCollNode> <checkForSplit> [50546] $$added root$$ id=-73
    <PCollNode> <checkForSplit> [50636] $$added root$$ id=-2559
    Environment details:
    Jdev: 11.1.1.5.0
    Database:11g
    Thanks
    -Venkat

    duplicate post: ADF application hangs after  $$added root$$ message in the logs

  • How to design static information table

    Hi gurus,
    I was trying to find a solution by googling etc but not sucessful.
    I am developing a mail letter report which will require a pretty word style table holding static informaiton. I can't find any to use HTML code. my current implementation is coping and pasting the MS Word table into OLE object. It looks ok in design view. But if I print the report, the result is not as good as with MS Word.
    Is there any way I can design static content table( this is not database table)?
    My CR version is 11.
    My Report: 1st page: customer details. some information such as names will be fetched from DB.
                     2nd page: static information (MS word style pretty table) for customers.
                     Both pages will be printed in one piece of paper (duplex).
    Thanks
    Oli
    Edited by: CRGuru on Jun 17, 2009 3:41 AM
    Edited by: CRGuru on Jun 17, 2009 3:43 AM
    Edited by: CRGuru on Jun 17, 2009 3:43 AM

    Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly

  • IPhone 4, has timestamp been added to messages to date?

    I just got an iPhone 4, has timestamp been added to messages to date?

    Ok sorted it looks like the folder where the music is stored had changed to itunes media when all my music is in itunes music. I have reset the default folder back to itunes music and that seem to have solved the issue. Thanks for those that helped.

  • I'm trying to find information on a form of message I have received to my iPhone. It appears on locked screen and I must press the green Dismiss icon at bottom to get rid of the message from the unknown sender and to then enter my pass code to enter my is

    I am trying to find information about a type of message I received on my iPhone. It appears as the message only on my locked screen, I must press on the green Dismiss icon at the bottom and the message disappears and then I can unlock my phone with passcode and use phone. This message stays there until I press Dismiss. It shows no sender or where it came from but is being sent to my phone number. Only a message the sender intends me to read shows on the screen then once dismissed, it disappears and does not show up or save in any application on my phone. Any ideas?

    Click here and request assistance.
    (91679)

Maybe you are looking for

  • My external hard drive doesn't show up in finder, is it dead?

    My external hard drive doesn't show up in finder.Time machine can't find it. Does this mean my external hard drive is dead? I borrowed a friends and switched mine with hers. My acted the same way in her macbook. I switched the cords on the external d

  • Install Windows 8.1 on my Xperia Z2

    Hey guys is it possible to install Windows 8.1 on my Xperia device because i really love Sony and i really love Windows OS! Really i don't know how to fix this problem i like Sony and hate Android OS! I like Windows OS i hate Nokia device with ugly d

  • Appropriation down payment AuC using F110 tcode

    Hello, I have a problem to appropriate down payment for AuC using F110 tcode: We work with CJ20N> Project Builder> WBS Element> Network> activity> Purchase Requisition. With the transaction ME21N> creation of the Purchase Order with reference to the

  • Basis (web as JAVA) online training needed

    Any gurus here interested in teaching web as JAVA online..Please help..thanks

  • Ipod updater file is so big!!!

    ipod updater file is so big!!! Dell   Windows XP   IPOD VIDEO 30GB