Static ip in workplace and dynamic otherwise need help
Hi! I Have static ip address in my workplace and all other areas i use laptop is having dynamic ip address.
I have tried configuring my static ip address in alternative configurations option still doesnt help
i have windows 7
please guide
regards
Aman
Hi,
So the situation is your workplace has a static IP address and the other places are using dynamic IP address?
What do you want to achive here? Are we in a domain environment?
Could you please tell more information for the network environment and your PC( Laptop ?) IP settings?
Best regards
Michael Shao
TechNet Community Support
Similar Messages
-
i have printers at home and work. i need help programing my macbook print utility so computer knows which printer to use depending on where i am. thanks
Look for cloud solutions such as DropBox, OneDrive, SugarSync or others. They are all cloud based services that sync documents between computers via the cloud. Of course another solution is simply a flash drive formatted in exFat so that Macs and Windows computers can read it.
-
Dynamic Forms and Flowing subforms -- Need help/Advice
Hello All -
I am creating a form for instructors at our college to complete. It has 3 pages, some static text, some required drop-down boxes, and three "comment" type areas which I would like to create so that they "flow" and display the entire contents when printed.
I've read everything I could find so far, but I think I am missing something quite basic.
I've created master pages, with a content subform on each one. I've placed all my content into subforms under that main content subform, named and ordered them the way they need to be. Most of it should appear as positioned. Only where there is one of the comment sections do I want/need the "flow content" option.
I tried following the directions I found in another thread. If I set the subform with the comment area to flow, then I never get the page break option (and it is needed) - it's always grayed out. When I try to set the underlying subform on the page to 'flow content', ALL of the content from all three pages ends up on one page, everything on top of each other.
What am I doing wrong?
Can anyone give me some tips as to where at least to start looking for what I've not done or done wrong?
Thanks in advance for any information -- it will be soooo appreciated!
LaurenHi Lauren,
You only need one Master page, and there's no need to put anything on it unless you want a header/footer that repeats on each page.
If you want to have things flow from page to page, create one body page object, and set its content type to Flowed (the body page is itself a subform). In it you put subforms with text, fields, and so on in them. Since your form will spill from page to page based on how much text the instructors type into the expandable comments fields, break up the forms content into sections (subforms) such that the layout can break between the subforms without taking away from the readability. These subforms should have a content type of Position. Even though there's only one body page object in your design, since you have three pages worth of stuff, it will spill onto three pages.
Now for the comments fields, which you want to wrap and expand. Make sure that each of your comments fields is in its own subform. Set the field to allow multiple lines and, in the layout tab, click the box to Expand to Fit (height). For the subform that contains the comments field, set the height to auto-fit (layout tab). Also for the subforms that contain comments fields, experiment with the "Allow Page Breaks Within Content" checkbox on the Subform tab. If you expect an instructor to blab on for more than an entire page of text, you will have to select this box, but otherwise I suggest leaving it unselected so that the entire comment remains together.
Jared Langdon
www.jlangdon.ca -
No ACL deny logs for Traffic not matched by Static Object NATs and ACL. Need Help.
I start noticing that I do not see any denied traffic coming in on my ACL. To better explain, lets say I have this config.
### Sample Config ###
object network webserver
host 192.168.1.50
nat (dmz, outside) static X.X.X.X service tcp www www
access-list inbound extended permit ip any4 object webserver eq www
If I generate a traffic from the outside let's say a traffic that is trying to access X.X.X.X via TCP Port 8080 which obviously does not have any NAT entry to it going to my DMZ, I don't see the ACL denies it anymore but instead comes back with a Drop Reason: (nat-no-xlate-to-pat-pool) . On the packet trace I got this. (Below) it seems that does not even hit the ACL as there is no xlate found for it, at least to what the drop reason says.
Phase: 1
Type: CAPTURE
Subtype:
Result: ALLOW
Config:
Additional Information:
MAC Access list
Phase: 2
Type: ACCESS-LIST
Subtype:
Result: ALLOW
Config:
Implicit Rule
Additional Information:
MAC Access list
Phase: 3
Type: ROUTE-LOOKUP
Subtype: input
Result: ALLOW
Config:
Additional Information:
in 0.0.0.0 0.0.0.0 Outside
Result:
input-interface: Outside
input-status: up
input-line-status: up
output-interface: Outside
output-status: up
output-line-status: up
Action: drop
Drop-reason: (nat-no-xlate-to-pat-pool) Connection to PAT address without pre-existing xlate
Before, using a regular Static PAT on ASA Versions 8.2(5) below, I could get the deny logs (ASA-4-106023). Generally, I use these logs, and are quite important for us specially during auditing.
My question is how can I generate logs for these type of dropped traffic on the ASA 9.1 Version?
Any comments/suggestions are gladly appreciated :)
Regards,
JohnI believe, but am not 100% sure, that the reason you are not seeing the ACL drop but a no NAT matched is because of the changes from 8.2 to 8.3 in the order of how things are done. In 8.3 and later you need to secify the real IP address when allowing packets in, and this is because NAT happens before the ACL is matched. So since there is no match on the NAT the packet is dropped then and there, never reaching the stage where ACLs are checked.
As to seeing drops in the ACL log...You might want to try adding an ACL that matches the NATed IP...but I don't think you will have much success with that either. My guess is that there is no way around this...at least no way I know of.
Please remember to select a correct answer and rate helpful posts -
Wish I didn't upgrade! and now I need help to figure out how to make it wor
I have a Windows XP Pro 2nd edition with IE ver 6.0.2 (but I normally use FireFox)
I've never had any trouble with iTunes until iTunes "forced" me to upgrade my iTunes applicaiton to version 6 if I wanted to "purchase" music. (note to self: Purchase music from stores it's much safer)...
I upgraded and received no error messages. Trouble is now, when I launch the iTunes application it doesn't "open" ... although the iTunes process begins to run in the background process (ctraltdelete).
I have uninstalled and installed 5 different times and ways.
First uninstall was "typical" uninstall. THat didn't fix it.
Second uninstall was "typical" unistall from the Control Panel, and then I removed the folders from the "program File" folder. Still wouldn't work.
Third unintall was "typical" then I removed folders from local drive and removed all "known" registry "itune" keys. That didn't work.
Fourth uninstall was first a "repair" to itunes, and then a "typical" uninstall, then I removed folders, removed registry (does anyone know all of itunes registry keys? Maybe I am missing a few.. the only ones I know of is the "itune" reg). Then I looked through my start up menu from "msconfig" and took a look at my firewall program to see if there was anything preventing the program from running...
Fifth uninstall pretty much fruitless as my previous attempts.
I know it HAS to be a registry key of some sort.. here's why:
When I uninstall and reinstall (no matter how thourough) every time I install the iTunes program Windows XP has never ONCE recognized the new install of iTunes as a "NEW PROGRAM" and it should!
I need help... what registry keys should I be removing? ANyone suggest for me to remove Quick Time too? What about the ipod updater software? Any connection?
HELP??????????????????
THanks
W.hi wmchisholm!
Trouble is now, when I launch the iTunes application it doesn't "open" ... although the iTunes process begins to run in the background process (ctraltdelete).
hmmm. is itunes.exe persisting in Task Manager? if so, first check up on these two possibilities:
iTunes 6 won't open on a Windows computer if firewall software is not up-to-date
iTunes for Windows doesn't open after upgrading
but if itunes.exe is disappearing after a few seconds, try the following technique:
Using MSCONFIG to troubleshoot conflicts in Windows
... and let us know the names (exact spelling please) of the start-up items that you had to disable in order to get itunes to launch. (there's a nasty piece of malware out there that has been causing "error-less" itunes launch failures since late October.)
love, b -
I recently sold my iphone 4s back to att and they whiped it clean and now i have a galaxy s5 and my brother still has the iphone but when he sends me texts they dont always go through and i need help on what to do next
See if this helps:
iMesssage to old phone
If you move to another phone and forget to turn off iMessage then read “if you no longer have the device inhttp://support.apple.com/kb/HT5661 If you still cannot resolve it call Apple http://support.apple.com/kb/HE57
To deactivate iMessage http://support.apple.com/kb/ts5185
Read http://m.samsung.com/us/support/SupportOwnersFAQPopup.do?faq_id=FAQ00053450&fm_s eq=62995 -
I have a Imac and i cant acces adminastrator Becuase my two users dont have becuase i took them i dident know that would happen and need help i dont wanna loose all the stuff in the imac so if you can help please message me asp
Use the directions given here:
http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/ -
Few errror/doubts in Primary and Standby server - Need Help
Hi All,
I am having below doubts/errors. I need help to solve all the below questions.
I configured Dataguard successfully. Now the sync is upto date using the below parameters (using 11g):
at primary:
log_archive_dest_1=
log_archive_dest_2='SERVICE=standby.123 arch'
standby_file_management=auto
at sandby:
log_archive_dest_1=
standby_file_management=auto
Still i face below messages in the alertliog. Can anybody clearly explain me all the points.
Primary:
ORA-1652: unable to extend temp segment by 640 in tablespace NEWTEMP
I get this error when my archvie destination got filled up, later we released the enough space, the archived are generating. Still i see this message once in between. Need to solve this.
Primary:
Checkpoint not complete ( i see this message very often, want to get rid of this)
standby:
kcrrvslf: active RFS archival for log thread 1 sequence (sometimes i see this KCRRVSLF)
standby:
check that the CONTROL_FILE_RECORD_KEEP_TIME initialization parameter is defined to a value that is sufficiently large enough to maintain afequate log switch information to resolve archivelog gaps. (also get this message in between the alertlog file in standby)
Standby:
FAL[client]: Error fetching gap sequence, no FAL server specified (this is very often message. How to remove this, what needs to be added. Do i need to add the below parameters)
FAL_CLIENT
FAL_SERVER
Thanks in advance.
Pas Moh
[email protected]Pas Moh wrote:
Hi All,
I am having below doubts/errors. I need help to solve all the below questions.
I configured Dataguard successfully. Now the sync is upto date using the below parameters (using 11g):
at primary:
log_archive_dest_1=
log_archive_dest_2='SERVICE=standby.123 arch'
standby_file_management=auto
at sandby:
log_archive_dest_1=
standby_file_management=auto
Still i face below messages in the alertliog. Can anybody clearly explain me all the points.
Primary:
ORA-1652: unable to extend temp segment by 640 in tablespace NEWTEMP
I get this error when my archvie destination got filled up, later we released the enough space, the archived are generating. Still i see this message once in between. Need to solve this.This error has absolutely nothing to do with the handling of archive logs, the status of archivelog destination, or primary/standby. Any relation you thought you saw was pure coincidence.
>
>
Primary:
Checkpoint not complete ( i see this message very often, want to get rid of this)
Here is the very first hit I got when I googled "oracle checkpoint not complete". Tom says it better than I would have.
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:69012348056
standby:
kcrrvslf: active RFS archival for log thread 1 sequence (sometimes i see this KCRRVSLF)
A quick google of that one, and it looks like it is not even an error, but rather simply an informative
>
standby:
check that the CONTROL_FILE_RECORD_KEEP_TIME initialization parameter is defined to a value that is sufficiently large enough to maintain afequate log switch information to resolve archivelog gaps. (also get this message in between the alertlog file in standby)
In that case I would check that the CONTROL_FILE_RECORD_KEEP_TIME initialization parameter is defined to a value that is sufficiently large enough to maintain adequate log switch information to resolve archivelog gaps.
How big is that? Well, at least bigger than it is now. Beyond that, it would have to be "large enough to maintain adequate log switch information to resolve archivelog gaps" Just play with it until you get the result you want.
>
Standby:
FAL[client]: Error fetching gap sequence, no FAL server specified (this is very often message. How to remove this, what needs to be added. Do i need to add the below parameters)
FAL_CLIENT
FAL_SERVER
Thanks in advance.
Pas Moh
[email protected] -
I have EMS 3.5 installed and functioning. Need help with where to go next!
Hello All,
I am brand new to this and need a very basic push in the right direction.
I have FMS 3.5 installed on my server and I am ready to begin testing with it.
My website has a page with descriptions of videos and links to those videos.
When a link is selected, I want a new page to open and the video to play in the FMS player.
I have absolutely no idea how to go about this. I need some meaty information here. I read tom Green's tutorials, and although I found that they were informative, they are also quite general.
I have Flash Professional CS4 and I just need to know what the heck to do next.
Any and all help will be supremely appreciated.
Sincerely,
wordmanGentlemen,
Thank you for the answers, I will definitely look into what you both suggested.
My next step is getting a player into a separate page that plays selected videos through RTMP.
The player that comes with FMS would be fine, but I do not know how to alter it, change colors, etc.
Then I was looking into Real Eyes' REOPS player, and the white papers alone stopped me in my tracks. I realize it's probably easy, but now ehrn you are a novice, to understand it.
Then I saw Adobe Strobe, the OSMF-based player and thought that might be good for me.
The biggest problem I see is that Adobe's resources are not always easy to find on this website, same goes fo rthe OSMF site. Not very well structured sites for a software company.
Bottom line is, I need to get a player on a page that plays though RTMP. Any thoughts there? I'm completely new to Flash.
Thank you all!!!
Sincerely,
wordman -
I urgently require help in recovering my user password for my MacBook Pro on OS X Lion, I forgot my password and Apple ID recoveries aren't enabled and I can't enable them as I don't know my password and my hint didn't help me at all, I really, really need help!
Also, a solution may be found if you search in the "More Like This" section over in the right column.Solution may be found if you search in the "More Like This" section over in the right column.
-
Hi there,
I have bought yearly subscription for Tech suite which expires in May 2015, however I am unable to download or install/activate it. I am paying monthly however cant use it!
need help- Is there an email or phone number I can reach ---
Thanks
-VanitaBobLevine wrote:
[....] If you find something out, please do come back and update us.
Thanks for your willingness to help, but I got some great news!!!
I finally managed to find the cause for that deactivation problem. It's called the "Update Root Certificates" component, which somehow was unchecked on my machine. Although I had previously installed the Adobe HTTPS (SSL) certificate for secure connections between my computer and Adobe servers, used while signing in on my account, each time I had to click YES to confirm manually that this certificate was valid and safe.
Now, while deactivating from an application, such confirmation is not displayed and therefore the application considers a certificate (and thus connection as well) as invalid or unsafe. The result is: "Internet Not Found... Unable to Connect..." message.
Here's what I did to fix it:
1. clicked Start, and then pointed to Settings and then clicked Control Panel
2. double-clicked Add or Remove Programs
3. clicked Add/Remove Windows Components (on the left)
4. scrolled down the list of components to Update Root Certificates, and checked the check box for that component
5. clicked Next, and followed the instructions to complete the Windows Components Wizard.
After turning that on, the deactivation was almost like a blink of an eye.
So if anyone has a similar problem, make sure you have that system component turned on.
Matt -
Security Questions and Rescue Email "need help"
The AppStore won't let me purchase anything and it keeps asking for my security question but I donn't remember it and the rescue email is not the one I choosed. Please somebody help I just added money to the account too need help A.S.A.P.
You need to ask Apple to reset your security questions; this can be done by phoning AppleCare and asking for the Account Security team, or clicking here and picking a method, or if your country isn't listed in either article, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(106703) -
Problems with IOS 7.0.4 and ipad 2 need help
Need help with problems caused by downloading IOS 7.0.4 onto my ipad2
To answer, we'll need to know what problems you're having.
-
Calculating Login and Logout Times - need help
Hi everyone. I have the first part of this code and can't seem to figure out the time calculation part. What it is - create a code that asks for a user name or social security number, then the person enters up to 6 login and logout times for the day. They also have the option to enter personal time or sick time (neither of which can be over 8 hours). I have all of that complete, but I can't figure out how to get the in and out times and the leave times to calculate. I have 3 pieces of code - here they are:
Hours:
import java.util.*;
public class Hours
//define states of Hours
int regularhoursInt = 0;
int regularminutesInt = 0;
int overtimehoursInt = 0;
int overtimeminutesInt = 0;
//set hours worked
public void setHours(int timein, int timeout)
int temphoursin = timein/100;
int tempminutesin = timein - timein/100;
int temphoursout = timeout/100;
int tempminutesout = timeout - timeout/100;
GregorianCalendar time1 = new GregorianCalendar(2003, 8, 1, temphoursin, tempminutesin, 0);
GregorianCalendar time2 = new GregorianCalendar(2003, 8, 1, temphoursout, tempminutesout, 0);
//store to date
Date d1 = time1.getTime();
Date d2 = time2.getTime();
//store time to long
long t1 = d1.getTime();
long t2 = d2.getTime();
//subtract and convert to seconds
long time = (t2 - t1)/1000;
long tempregularLong = 0;
long tempovertimeLong = 0;
//see if regular hours are over 8 hours (28800 seconds)
tempregularLong = time;
if (tempregularLong > 28800)
tempovertimeLong = tempregularLong - 28800;
tempregularLong = tempregularLong - tempovertimeLong;
//convert to hours and minutes
regularhoursInt = regularhoursInt + (Integer.parseInt(Long.toString(tempregularLong)) / 3600);
regularminutesInt = regularminutesInt + (Integer.parseInt(Long.toString(tempregularLong)) / (3600 * regularhoursInt));
overtimehoursInt = overtimehoursInt + (Integer.parseInt(Long.toString(tempovertimeLong)) / 3600);
overtimeminutesInt = overtimeminutesInt + (Integer.parseInt(Long.toString(tempovertimeLong)) / (3600 * regularhoursInt)); }
// get regular hours worked
public int getRegularHours()
return regularhoursInt;
// get regular minutes worked
public int getRegularMinutes()
return regularminutesInt;
//get overtime hours worked
public int getOvertimeHours()
return overtimehoursInt;
// get overtime minutes worked
public int getOvertimeMinutes()
return overtimeminutesInt;
Employee:
public class Employee
//define states of employee
String nameString = "";
String ssnString = "";
double payrateDouble = 0;
double hoursworkedDouble = 0;
double overtimehoursDouble = 0;
double sickleaveDouble = 0;
double personalleaveDouble = 0;
double totalpayDouble = 0;
//set and get employee name
public void setName(String name)
nameString = name;
public String getName()
return nameString;
//set and get employee ssn
public void setSsn(String ssn)
ssnString = ssn;
public String getSsn()
return ssnString;
//set and get employee payrate
public void setPayRate(double payrate)
payrateDouble = payrate;
public double getPayRate()
return payrateDouble;
//set and get employee hours worked
public void setHoursWorked(double hoursworked)
hoursworkedDouble = hoursworked;
public double getHoursWorked()
return hoursworkedDouble;
//set and get employee overtimehours
public void setOverTime(double overtime)
overtimehoursDouble = overtime;
public double getOverTime()
return overtimehoursDouble;
//set and get employee sick leave hours
public void setSickLeave(double sickleave)
sickleaveDouble = sickleave;
public double getSickLeave()
return sickleaveDouble;
//set and get employee sick leave hours
public void setPersonalLeave(double personalleave)
personalleaveDouble = personalleave;
public double getPersonalLeave()
return personalleaveDouble;
//get employees total pay
public double getTotalPay()
//calculate regular pay
totalpayDouble = payrateDouble * hoursworkedDouble;
//add in any over time pay
totalpayDouble = totalpayDouble + payrateDouble * 1.5 * overtimehoursDouble;
//add in any sick time pay
totalpayDouble = totalpayDouble + payrateDouble * sickleaveDouble;
//add in any personal leave time pay
totalpayDouble = totalpayDouble + payrateDouble * personalleaveDouble;
return totalpayDouble;
Entry Screen:
import java.awt.*;
import java.awt.event.*;
import java.applet.Applet;
import javax.swing.*;
import java.util.*;
import java.text.*;
//create entryscreen class as a java applet
public class EntryScreen extends Applet implements ActionListener
//declare all variables, labels, textfields, and buttons
//store pay rate to variable payrateDouble
double payrateDouble = 10.00;
//store ssn and names to ssnString
String[][] ssnString ={{"123121234", "234232345", "345343456", "456454567",
"567565678", "678676789"},{"Jane Doe", "John Doe", "Sam Smith", "Tom Thumb", "Sara Jane", "Cindy Thompson"}};
//set date format to MM/dd/yy and store in variable formatter
SimpleDateFormat formatter = new SimpleDateFormat("MM/dd/yy");
//store current date to variable date
Date date = new Date();
//using variable formatter store current date to dateString
String dateString = formatter.format(date);
//declare all label, Textfields and buttons use in the applet
JLabel titleLabel;
JLabel dateLabel;
JTextField dateTextField;
JLabel ssnLabel;
JTextField ssnTextField;
JLabel timeLabel;
JLabel inLabel;
JLabel outLabel;
JTextField in1TextField;
JTextField in2TextField;
JTextField in3TextField;
JTextField in4TextField;
JTextField in5TextField;
JTextField in6TextField;
JTextField out1TextField;
JTextField out2TextField;
JTextField out3TextField;
JTextField out4TextField;
JTextField out5TextField;
JTextField out6TextField;
JLabel sickLabel;
JTextField sickTextField;
JTextField personalTextField;
JLabel personalLabel;
JButton okButton;
JButton clearButton;
JLabel day1Label;
JLabel day2Label;
JLabel day3Label;
JLabel day4Label;
JLabel day5Label;
JLabel day6Label;
//initialize the applet screen
public void init()
//create a custom layout object based on the EntryScreenLayout class
EntryScreenLayout customLayout = new EntryScreenLayout();
//set the font for the screen
setFont(new Font("Helvetica", Font.PLAIN, 12));
setLayout(customLayout);
//populate the applet with the labels, textfields, and buttons
titleLabel = new JLabel("Employee Payroll System");
add(titleLabel);
dateLabel = new JLabel("Date (MM/DD/YY):");
add(dateLabel);
dateTextField = new JTextField("");
add(dateTextField);
//set text in field to current date
dateTextField.setText(dateString);
ssnLabel = new JLabel("SSN (Numbers Only):");
add(ssnLabel);
ssnTextField = new JTextField("");
add(ssnTextField);
timeLabel = new JLabel("Hours Worked (hhmm)");
add(timeLabel);
inLabel = new JLabel("In:");
add(inLabel);
outLabel = new JLabel("Out");
add(outLabel);
in1TextField = new JTextField("");
add(in1TextField);
in2TextField = new JTextField("");
add(in2TextField);
in3TextField = new JTextField("");
add(in3TextField);
in4TextField = new JTextField("");
add(in4TextField);
in5TextField = new JTextField("");
add(in5TextField);
in6TextField = new JTextField("");
add(in6TextField);
out1TextField = new JTextField("");
add(out1TextField);
out2TextField = new JTextField("");
add(out2TextField);
out3TextField = new JTextField("");
add(out3TextField);
out4TextField = new JTextField("");
add(out4TextField);
out5TextField = new JTextField("");
add(out5TextField);
out6TextField = new JTextField("");
add(out6TextField);
sickLabel = new JLabel("Sick Leave Used:");
add(sickLabel);
sickTextField = new JTextField("");
add(sickTextField);
personalTextField = new JTextField("");
add(personalTextField);
personalLabel = new JLabel("Personal Leave Used:");
add(personalLabel);
okButton = new JButton("Ok");
add(okButton);
okButton.addActionListener(this);
clearButton = new JButton("Clear");
add(clearButton);
clearButton.addActionListener(this);
day1Label = new JLabel("Day 1:");
add(day1Label);
day2Label = new JLabel("Day 2:");
add(day2Label);
day3Label = new JLabel("Day 3:");
add(day3Label);
day4Label = new JLabel("Day 4:");
add(day4Label);
day5Label = new JLabel("Day 5:");
add(day5Label);
day6Label = new JLabel("Day 6:");
add(day6Label);
//set the size of the applet window as listed in the EntryScreenLayout class
setSize(getPreferredSize());
public void actionPerformed(ActionEvent e)
//get the source object
Object source = e.getSource();
//perform if OK button was presses
if(source == okButton)
int[][] inouttimes = new int[1][5];
boolean matchBoolean = false;
boolean timeError = false;
int locationInt = 0;
double[] leavehours = new double[1];
String messageString = "";
//get the text from the ssnTextField and store to inputString
String inputString = ssnTextField.getText();
//check to see if inputString matches ssnString array
for(int i = 0; i < 6; ++i)
//if a match assign variables
if (inputString.equals(ssnString[0]))
matchBoolean = true;
locationInt = i;
break;
//if not a match
else
matchBoolean = false;
}//end for i
//if a SSN match is true than display the name, SSN, total hours, overtime hours, and total pay for hours worked.
if (matchBoolean == true)
//get the check in/out times, if blank assign a zero
Employee temp = new Employee();
temp.setName(ssnString[1][locationInt]);
temp.setSsn(ssnString[0][locationInt]);
temp.setPayRate(payrateDouble);
temp.setSickLeave(Double.parseDouble(sickTextField.getText()));
temp.setPersonalLeave(Double.parseDouble(personalTextField.getText()));
/*inouttimes[0][0] = Integer.parseInt(in1TextField.getText());
inouttimes[1][0] = Integer.parseInt(out1TextField.getText();
inouttimes[0][1] = Integer.parseInt(in2TextField.getText();
inouttimes[1][1] = Integer.parseInt(out2TextField.getText();
inouttimes[0][2] = Integer.parseInt(in3TextField.getText();
inouttimes[1][2] = Integer.parseInt(out3TextField.getText();
inouttimes[0][3] = Integer.parseInt(in4TextField.getText();
inouttimes[1][3] = out4TextField.getText();
inouttimes[0][4] = in5TextField.getText();
inouttimes[1][4] = out5TextField.getText();
inouttimes[0][5] = in6TextField.getText();
inouttimes[1][5] = out6TextField.getText();
for (int x = 0; x < 2; ++x)
for (int y = 0; y < 2; ++y)
String temp = String.valueOf(inouttimes[x][y]);
if (temp.equals(""))
inouttimes[x][y] = 0;
if (inouttimes[x][y] < 0 && inouttimes[x][y] > 2400)
timeError = true;
break;
if (timeError = true)
break;
messageString = temp.getName() + "\n" + temp.getSsn() + "\n" + temp.getTotalPay();
JOptionPane.showMessageDialog(null, messageString);
}//if (matchBoolean == true)
//if SSN match is false then display error message
else
JOptionPane.showMessageDialog(null, "There is no listing under that Social Security Number.\n" +
"Please verify and re-enter.");
}//end if(source == okButton)
//perform if the Clear button was pressed
if(source == clearButton)
//clear all the textfields
dateTextField.setText("");
ssnTextField.setText("");
in1TextField.setText("");
out1TextField.setText("");
in2TextField.setText("");
out2TextField.setText("");
in3TextField.setText("");
out3TextField.setText("");
in4TextField.setText("");
out4TextField.setText("");
in5TextField.setText("");
out5TextField.setText("");
in6TextField.setText("");
out6TextField.setText("");
sickTextField.setText("");
personalTextField.setText("");
//set text in field to current date
dateTextField.setText(dateString);
public static void main(String args[])
//create new entryscreen object called applet
EntryScreen applet = new EntryScreen();
//create new frame for applet called window
Frame window = new Frame("EntryScreen");
window.addWindowListener(new WindowAdapter()
public void windowClosing(WindowEvent e)
//close the applet
System.exit(0);
//initiate the applet
applet.init();
window.add("Center", applet);
window.pack();
window.setVisible(true);
//create entryscreenlayout custom class to position controls on applet screen
class EntryScreenLayout implements LayoutManager {
public EntryScreenLayout() {
public void addLayoutComponent(String name, Component comp) {
public void removeLayoutComponent(Component comp) {
public Dimension preferredLayoutSize(Container parent) {
Dimension dim = new Dimension(0, 0);
Insets insets = parent.getInsets();
dim.width = 360 + insets.left + insets.right;
dim.height = 487 + insets.top + insets.bottom;
return dim;
public Dimension minimumLayoutSize(Container parent) {
Dimension dim = new Dimension(0, 0);
return dim;
public void layoutContainer(Container parent) {
Insets insets = parent.getInsets();
Component c;
c = parent.getComponent(0);
if (c.isVisible()) {c.setBounds(insets.left+88,insets.top+8,192,24);}
c = parent.getComponent(1);
if (c.isVisible()) {c.setBounds(insets.left+24,insets.top+48,152,24);}
c = parent.getComponent(2);
if (c.isVisible()) {c.setBounds(insets.left+184,insets.top+48,152,24);}
c = parent.getComponent(3);
if (c.isVisible()) {c.setBounds(insets.left+24,insets.top+80,152,24);}
c = parent.getComponent(4);
if (c.isVisible()) {c.setBounds(insets.left+184,insets.top+80,152,24);}
c = parent.getComponent(5);
if (c.isVisible()) {c.setBounds(insets.left+104,insets.top+112,152,24);}
c = parent.getComponent(6);
if (c.isVisible()) {c.setBounds(insets.left+104,insets.top+144,72,24);}
c = parent.getComponent(7);
if (c.isVisible()) {c.setBounds(insets.left+184,insets.top+144,72,24);}
c = parent.getComponent(8);
if (c.isVisible()) {c.setBounds(insets.left+104,insets.top+176,72,24);}
c = parent.getComponent(9);
if (c.isVisible()) {c.setBounds(insets.left+104,insets.top+208,72,24);}
c = parent.getComponent(10);
if (c.isVisible()) {c.setBounds(insets.left+104,insets.top+240,72,24);}
c = parent.getComponent(11);
if (c.isVisible()) {c.setBounds(insets.left+104,insets.top+272,72,24);}
c = parent.getComponent(12);
if (c.isVisible()) {c.setBounds(insets.left+104,insets.top+304,72,24);}
c = parent.getComponent(13);
if (c.isVisible()) {c.setBounds(insets.left+104,insets.top+336,72,24);}
c = parent.getComponent(14);
if (c.isVisible()) {c.setBounds(insets.left+184,insets.top+176,72,24);}
c = parent.getComponent(15);
if (c.isVisible()) {c.setBounds(insets.left+184,insets.top+208,72,24);}
c = parent.getComponent(16);
if (c.isVisible()) {c.setBounds(insets.left+184,insets.top+240,72,24);}
c = parent.getComponent(17);
if (c.isVisible()) {c.setBounds(insets.left+184,insets.top+272,72,24);}
c = parent.getComponent(18);
if (c.isVisible()) {c.setBounds(insets.left+184,insets.top+304,72,24);}
c = parent.getComponent(19);
if (c.isVisible()) {c.setBounds(insets.left+184,insets.top+336,72,24);}
c = parent.getComponent(20);
if (c.isVisible()) {c.setBounds(insets.left+24,insets.top+368,152,24);}
c = parent.getComponent(21);
if (c.isVisible()) {c.setBounds(insets.left+184,insets.top+368,72,24);}
c = parent.getComponent(22);
if (c.isVisible()) {c.setBounds(insets.left+184,insets.top+400,72,24);}
c = parent.getComponent(23);
if (c.isVisible()) {c.setBounds(insets.left+24,insets.top+400,152,24);}
c = parent.getComponent(24);
if (c.isVisible()) {c.setBounds(insets.left+104,insets.top+440,72,24);}
c = parent.getComponent(25);
if (c.isVisible()) {c.setBounds(insets.left+184,insets.top+440,72,24);}
c = parent.getComponent(26);
if (c.isVisible()) {c.setBounds(insets.left+24,insets.top+176,72,24);}
c = parent.getComponent(27);
if (c.isVisible()) {c.setBounds(insets.left+24,insets.top+208,72,24);}
c = parent.getComponent(28);
if (c.isVisible()) {c.setBounds(insets.left+24,insets.top+240,72,24);}
c = parent.getComponent(29);
if (c.isVisible()) {c.setBounds(insets.left+24,insets.top+272,72,24);}
c = parent.getComponent(30);
if (c.isVisible()) {c.setBounds(insets.left+24,insets.top+304,72,24);}
c = parent.getComponent(31);
if (c.isVisible()) {c.setBounds(insets.left+24,insets.top+336,72,24);}
I know it is a lot of code, but I am just starting and couldn't think of an easier way to do this.
Thank you for any help - it is greatly appreciated. You can email me with any code help - [email protected].
StephMy 2 cents, I dunno what it'll be worth.
I think you should never convert anything until the final moment that you are at actually getting the int or float number of hours.
Why are you doing all this Gregorian and conversion gymnastics throughout your calculations?
To get the current time in milliseconds, use either
java.util.Date d = new java.util.Date();
or
long d = System.currentTimeMillis();
Use this long number for all your calculations, and only at the end convert it. To convert, you can use java.text.SimpleDateFormat, which I find very straightforward to use. I honestly think you should never convert your dates before doing any calculations, only after doing them, otherwise you'll loose precision and make errors for sure. -
Setup Guest Network with OS X Server and Airport Extreme - NEED HELP!
Hi All,
So I have a small business with a Mac Mini Server (10.6.5) and an Airport Extreme. The Airport is handling the routing and DHCP duties, while the Server is handling the DNS. The Airport is pointed to pull DNS from the Server. All internal systems work great accessing the internet and folders on the Server.
I need to setup a Guest network for internet access, so I turned this function on in the Airport Extreme. It sets up fine, but if you connect to that new Guest Network the system hangs trying to open a web page. My thinking is since the Server is the one handling the DNS it is not working for Guest computers since they are not part of our internal network. At least that is my theory, I could be wrong.
With this type of setup what do I need to modify to get this working? Anyone have any ideas?After trying for days to figure this out I was finally able to get a working solution and I now have my APE providing a guest and main network while using my lion server as the Dsn server for the main network.
The setup is a bit of a hack and does require you to have at least two devices with staticly assigned ip information on the main network but it does allow you to serve dhcp for both networks from the server and make some services available to the guest network such as iTunes remote for parties.
1) delete your custom Dns entries from the Internet settings in the APE and set two dhcp reservations for .2 and .3 (in this case my Mac mini server and my airport express)
2) reduce the dhcp range to only have 2 available IPs (10.0.1.2-10.0.1.3) and save settings
3) on a computer connected to the main network install wireshark and begin sniffing for packets. Connect at least one device to your guest network and look for any packets that have an ip from your guest network (usually 172.16.42.x) once you capture one of these packets expand the vlan information. This should list a vlan ID ( in my case this was 1003. I would suspect this is universal but do not know)
4) on your server open network preferences, click the gear at the bottom and click "manage virtual interfaces", add a vlan that matches the vlan ID from above. Click ok and apply your settings. The vlan interface should get an ip in the guest network range from your APE.
* if you are running lion you will need to install server admin tools before proceeding*
5) open server admin and add the dhcp service. Create an entry for your primary network (ex: 10.0.1.x) make the dhcp range one higher than the settings in step 2 ( ie: 10.0.1.4 to 10.0.1.253) assign this to the physical interface. Make sure this entry has your internal DNA servers
6) add another entry for the guest networks ip range (ex: 172.16.42.x) again set it one ip higher than step 2 ( 172.16.42.4 to 172.16.42.253) save and activate both ranges. Assign this range to the vlan interface. Make sure this entry either contains your isps dns servers or another public dns server. Turn on dhcp.
Because you have now assigned the only two addresses in the APEs pool for your primary network to static entries there will not be any addresses to assign and the APE will not respond to requests. This will allow your server to pick up the work of assigning IPs. As for your guest network, the APE will assign IPs for two host and then stop. Your clients may either get an IP from the APE or the osx server so both should have the same info. Just make sure the two static clients on your main network have the local DNA servers entered manually.
Maybe you are looking for
-
Verizon Reps incorrectly led us to sign up for edge, now unable to use more everything plan
I have a family of 5, 3 people on one account and 2 of us each with our own accounts. We have all been loyal customers for 5+ years. With the data pricing changes and new plan options being rolled out, we decided we wanted to take advantage of the
-
ITunes music library will not update on iPod after syncing
I did a computer swipe a number of months ago and was only just recently able to recover my iTunes account. So fortunately I have all my music still (well most of it. Some of my file locations are missing but that is user error). Now, yesterday I s
-
How can i fill the color (solid) of shapes within an layer? For now I got: function getLayer(name) return app.activeDocument.layers.getByName(name); function fillSelection(hex) var layer = getLayer('Background'); app.activeDocument.active
-
External display quits and resets to desktop
I gave a presentation w/ presenter notes on my screen and the slide on the external projector. A couple times in the middle of the presentation, the external display stopped showing the slide. Instead, it displayed my desktop with the application off
-
Getting cfgrid (flash) to submit a row
Hi all, I'm at about my wits end on this...I can submit a row from a query set in cfgrid if I set it to format=html and it works just fine. However, with that format, I cannot sort columns which is necessary. So, I set format=flash and the formatti