Static Master data

Hi Experts,
i am given a requirement to create few infoobjects and also there is some master data given to me and they say its very much static for few master data objects , and client is asking to directly create in development system ,
is that our usull way of doing master data if it is static,
then if we transport the object to quality and production does this data get transported
Please guide me as what to do with this requirement
Thanks in advance
Nitya

Hi Nitya,
Data wont get transported to QA n PROD. You need to maintain the same or load the same in QA n PROD as well.
You can do one thing instead of loading manually why dont you use flat file load. by this you can load in QA n PROD as well.Its not best practice to maintain master data manually in PROD environment.
Regards
KP

Similar Messages

Attr Change Run Master Data Infoobject PChain

In the master data process chain process type Attribute Change Run which is usually at the end of the chain updates the changes in the master data infoobjects.
The Chain is usually designed with full infopacks and say if it is scheduled every night , isn't it loading the master data again ( duplicating ) and again even though considering the process type Attribute Change Run at the end.
Is it like just the attribute change run is executed for updates ?If thats the case why do we need a process chain for Masterdata...if its only one time full ..that can be done manually right?
Am I missing something here ...?

If you look at the detail in the Monitor for a Master Data load, it will tell you how many recordssent from R/3 and how many records were updated and inserted.
As far as static master data that deos not regularly have new records or changes - you're right you don't need to load those objects daily, they could be loaded perhaps monthly.
You might consider balancing how fancy you try to get with breaking up master data into different groups, loading some daily, and other sweekly, others monthly, etc. In our case we use to have a fairly elaborate master data load schedule, loading someobjects 1st Tuesday of the month, others 2nd, Tues, others 3rd etc, and then we had weekly loads and dailys. When I began to review the run times involved, it was apparent that the various monthly loads, in total, ran less than 10 minutes, so I just consolidated the 4 differently monthly maser data loads and the weekly loads all into a single process chain. While much of the this master data doesn't change much, it was much easier to just schdule mastr data either daily or weekly, rather than getting too elaborate.
Now if run time of master data loads or change runs sarts to become an issue, then you might have to adopt a more elaborate schedule. It really depends on your environment.

CIF of master data

Hi,
My question is related to the CIF of master data.
I built an integration model to transfer the materials from R/3 to APO, and then the delta modifications are CIF by a background process at night.
I would like to transfer all the delta master data, but having one excetption.
I do not need to transfer the safety stock delta changes in R/3 to APO, so that I maintain these values independently in APO. The issue is that the safety stock values in R/3 are also changed but with another purpose and the R/3 values are overwriting the values that I am uploading directly in APO after the delta CIF transfer.
Is there any way that I can CIF the delta master data changes in R/3, but restricting the delta safety stock changes?
Thanks a lot!

Yes it is possible. You have to add custom logic in the material CIF user exit to turn off the update of safety stock fields in APO. Actually there are a lot of threads in this forum that discuss this issue.
You can start by referring to the thread below
Re: CIF problem with Dynamic and Static Stock Method

About material master data batch input

hello
    i wrote a batch input for material master data. but it can't work ,i can't use it to create material.hope someone help me!thanks.code is below.
report z_mat_batchinput no standard page heading
      line-size 255 message-id YB.
       mat batch input
include bdcrecx1.
include .
tables: mara,marm,MARC,MARD,T134,NRIV,T006A,T023,T001W,T001L,
        TVKO,TVTW,T025,TTGR,TLGR,TVKWZ,T006.
data: DIMID like t006-DIMID.
data: flag, K, tmp.
DATA: X TYPE I.
************ÉÏÔØÎÄ¼þÄÚ±í************************
data: begin of record occurs 0,
        MATNR(018),        " ÎïÁÏºÅ
        MTART(004),        " ÎïÁÏÀàÐÍ
**generaldata1**
        MAKTX(040),        " ÎïÁÏÃèÊö
       EAKTX(040),        " Ó¢ÎÄÃèÊö
        MEINS(003),        " »ù±¾¼ÆÁ¿µ¥Î»
        MATKL(009),        " ÎïÁÏ×é
        BISMT(018),        " ¾ÉÎïÁÏºÅ
       EXTWG(018),        " Íâ²¿ÎïÁÏ×é
       SPART(002),        " ²¿ÃÅ
        MTPOS_MARA(004),   " ÆÕÍ¨ÏîÄ¿Àà±ð×é
        BRGEW(017),        " Ã«ÖØ
        GEWEI(003),        " ÖØÁ¿µ¥Î»
        NTGEW(017),        " ¾»ÖØ
        VOLUM(017),        " Ìå»ý
        VOLEH(003),        " Ìå»ýµ¥Î»
        GROES(032),        " Á¿¸Ù
        MAGRV(004),        " ÎïÁÏ×éµÄ°ü×°Îï
**generaldata2**
        NORMT(018),        " ¹¤Òµ±ê×¼ÃèÊö
        FERTH(018),        " ÀàÐÍ
        WRKST(048),        " ¹æ¸ñ
**generaldata1**
       EAN11(018),        " ²úÆ·±íÊ¶Âë
**generaldata2**
       ZEIAR(003),        " ÎÄµµÀàÐÍ£¬ºÏÀí´¢±¸ÖÜ×ªÆÚ
        WERKS(004),        " ¹¤³§
        VKORG(004),        " ÏúÊÛ×éÖ¯
        VTWEG(002),        " ·ÖÏúÇþµÀ
**salesorg 1**
       VRKME(003),        " ÏúÊÛµ¥Î»
       VMREN(006),        " ÏúÊÛµ¥Î»×ª»»Òò×Ó
       VMREZ(006),        " »ù±¾µ¥Î»×ª»»Òò×Ó
        SPART(002),        " ²úÆ·×é
        DWERK(004),        " ½»»õ¹¤³§
        TAXKM(001),        " ÎïÁÏË°·ÖÀà
**salesorg 2**
        KONDM(002),        " ÎïÁÏ¶¨¼Û×é
        KTGRM(002),        " ¿ÆÄ¿ÉèÖÃ×é
       MVGR1(003),                                         " ÎïÁÏ×é 1
       MVGR2(003),                                         " ÎïÁÏ×é 2
        MTPOS(004),        " ÏîÄ¿Àà±ð×é
       VERSG(001),        " ÎïÁÏÍ³¼Æ×é
**ÏúÊÛ£ºÒ»°ã/¹¤³§Êý¾Ý**
        MTVFP(002),        " ¿ÉÓÃÐÔ¼ì²é
        XCHPF(001),        " Åú´Î¹ÜÀí
       YCHPF(001),        " ÅúÁ¿¹ÜÀí
        TRAGR(004),        " ÔËÊä×é
        ladgr(004),        " ×°ÔØ×é
**pur**
       BSTME(003),        " ¶©µ¥µ¥Î»
       UMREZ(006),        " »ù±¾µ¥Î»×ª»»Òò×Ó
       UMREN(006),        " ¶©µ¥µ¥Î»×ª»»Òò×Ó
       WEBAZ(003),        " ÊÕ»õ´¦ÀíÊ±¼ä
        EKGRP(003),        " ²É¹º×é
      LGORT(004),        " ¿â´æµØ
**Ò»°ã¹¤³§Êý¾Ý/²Ö´¢1**
       AUSME(003),        " ·¢»õµ¥Î»
       UMREJ(006),        " »ù±¾µ¥Î»×ª»»Òò×Ó
       UMREF(006),        " ·¢»õµ¥Î»×ª»»Òò×Ó
       XCHPF(001),        " ÅúÁ¿¹ÜÀí
**MRP 1**
       DISGR(004),        " MRP×é
        DISMM(002),        " MRPÀàÐÍ
       FXHOR(003),        " ¼Æ»®µÄÊ±½ì
        DISPO(003),        " MRP¿ØÖÆÕß
        DISLS(002),        " ÅúÁ¿
        MAABC(001),        " ABC±êÊ¶
       BSTFE(018),        " ¹Ì¶¨ÅúÁ¿´óÐ¡
**MRP 2**
       RESKZ(001),        " »ñÈ¡ÀàÐÍ
        BESKZ(001),        " ²É¹ºÀàÐÍ
       SOBSL(002),        " ÌØÊâ²É¹ºÀà
       LGPRO(004),        " ·¢»õ²Ö´¢µØµã
       RGEKZ(001),        " ·´³å
        PLIFZ(003),        " ¼Æ»®½»»õÊ±¼ä
       VEBAZ(003),        " ÊÕ»õ´¦ÀíÊ±¼ä
        DZEIT(008),        "×ÔÖÆÉú²ú
        FHORI(003),        " ¼Æ»®±ß¼ÊÂë
       EISBE(018),        " °²È«¿â´æ
**MRP 3**
        PERKZ(001),        " ÆÚ¼ä±êÊ¶
        STRGR(002),        " ²ßÂÔ×é
       VRMOD(001),        " ÏûºÄÄ£Ê½
       VINT1(003),        " ÄæÏòÏûºÄÆÚ¼ä
       VINT2(003),        " ÏòÇ°ÏûºÄÆÚ¼ä
        NTVFP(002),        " ¿ÉÓÃÐÔ¼ì²é
**MRP 4**
       SAUFT(001),        " ÖØ¸´ÖÆÔì±êÖ¾
       SFEPR(004),        " ÖØ¸´Éú²ú²ÎÊýÎÄ¼þ
**¹¤×÷¼Æ»®**
       FEVOR(003),        " Éú²úµ÷¶ÈÔ±
       FRTME(003),        " Éú²úµ¥Î»
       SMREZ(006),        " »ù±¾µ¥Î»×ª»»Òò×Ó
       SMREN(006),        " Éú²úµ¥Î»×ª»»Òò×Ó
       UEETK(001),        " ÎÞÏÞÖÆ¹ýÁ¿½»»õ
**»á¼Æ 1**
        BKLAS(004),        " ÆÀ¹ÀÀà
       BWTTY(001),        " ¹À¼Û·ÖÀà
        VPRSV(001),        " ¼Û¸ñ¿ØÖÆ
        PEINH(006),        " ¼Û¸ñµ¥Î»
        VERPR(015),        " ÒÆ¶¯Æ½¾ù¼Û
        STPRS(015),        " ±ê×¼¼Û
**»á¼Æ 2**
       BWPRH(014),        " ÉÌÒµ¼Û¸ñ 1
**³É±¾ 1**
       LOSGR(018),        " ÅúÁ¿³É±¾ºËËã
**³É±¾ 2**
       ZPLP1(014),        " ¼Æ»®¼Û¸ñ 1
       ZPLD1(010),        " ¼Æ»®ÈÕÆÚ 1
**qm**
        ART1(8),            "¼ìÑéÀàÐÍ1
        AKTIV1(1),          "ÒÑ¼¤»î
        QMPUR(1),             "¼¤»î²É¹ºÖÐµÄ QM
        SSQSS(8),          "QM ¿ØÖÆÂë¡¢
       QMATV(8),          "QM¼ìÑéÉèÖÃ
       ART2(8),            "¼ìÑéÀàÐÍ2
       AKTIV2(6),          "ÒÑ¼¤»î
       ART3(8),            "¼ìÑéÀàÐÍ3
       AKTIV3(6),          "ÒÑ¼¤»î
      end of record.
************ÏÂÔØ¸ñÊ½/´íÎóÎÄ¼þÄÚ±í**************
data: begin of record1 occurs 0,
        MATNR(018),        " ÎïÁÏºÅ
        MTART(008),        " ÎïÁÏÀàÐÍ
**»ù±¾Êý¾Ý1**
        MAKTX(040),        " ÎïÁÏÃèÊö
       EAKTX(040),        " Ó¢ÎÄÃèÊö
        MEINS(013),        " »ù±¾¼ÆÁ¿µ¥Î»
        MATKL(009),        " ÎïÁÏ×é
        BISMT(018),        " ¾ÉÎïÁÏºÅ
       EXTWG(018),        " Íâ²¿ÎïÁÏ×é
       SPART(002),        " ²¿ÃÅ
        MTPOS_MARA(004),   " ÆÕÍ¨ÏîÄ¿Àà±ð×é
        BRGEW(017),        " Ã«ÖØ
        GEWEI(008),        " ÖØÁ¿µ¥Î»
        NTGEW(017),        " ¾»ÖØ
        VOLUM(017),        " Ìå»ý
        VOLEH(008),        " Ìå»ýµ¥Î»
        GROES(032),        " Á¿¸Ù
        MAGRV(014),        " ÎïÁÏ×éµÄ°ü×°Îï
**»ù±¾Êý¾Ý2**
        NORMT(018),        " ¹¤Òµ±ê×¼ÃèÊö
        FERTH(018),        " ÀàÐÍ
        WRKST(048),        " ¹æ¸ñ
**»ù±¾Êý¾Ý1**
       EAN11(018),        " ²úÆ·±íÊ¶Âë
**»ù±¾Êý¾Ý2**
       ZEIAR(003),        " ÎÄµµÀàÐÍ£¬ºÏÀí´¢±¸ÖÜ×ªÆÚ
        WERKS(004),        " ¹¤³§
        VKORG(008),        " ÏúÊÛ×éÖ¯
        VTWEG(008),        " ·ÖÏúÇþµÀ
**ÏúÊÛ×éÖ¯ 1**
       VRKME(003),        " ÏúÊÛµ¥Î»
       VMREN(006),        " ÏúÊÛµ¥Î»×ª»»Òò×Ó
       VMREZ(006),        " »ù±¾µ¥Î»×ª»»Òò×Ó
        SPART(006),        " ²úÆ·×é
        DWERK(008),        " ½»»õ¹¤³§
        TAXKM(010),        " ÎïÁÏË°·ÖÀà
**ÏúÊÛ×éÖ¯ 2**
        KONDM(010),        " ÎïÁÏ¶¨¼Û×é
        KTGRM(010),        " ¿ÆÄ¿ÉèÖÃ×é
       MVGR1(003),                                         " ÎïÁÏ×é 1
       MVGR2(003),                                         " ÎïÁÏ×é 2
        MTPOS(010),        " ÏîÄ¿Àà±ð×é
       VERSG(001),        " ÎïÁÏÍ³¼Æ×é
**ÏúÊÛ£ºÒ»°ã/¹¤³§Êý¾Ý**
        MTVFP(010),        " ¿ÉÓÃÐÔ¼ì²é
        XCHPF(008),        " Åú´Î¹ÜÀí
       YCHPF(001),        " ÅúÁ¿¹ÜÀí
        TRAGR(006),        " ÔËÊä×é
        ladgr(006),        " ×°ÔØ×é
**²É¹º**
       BSTME(003),        " ¶©µ¥µ¥Î»
       UMREZ(006),        " »ù±¾µ¥Î»×ª»»Òò×Ó
       UMREN(006),        " ¶©µ¥µ¥Î»×ª»»Òò×Ó
       WEBAZ(003),        " ÊÕ»õ´¦ÀíÊ±¼ä
        EKGRP(006),        " ²É¹º×é
      LGORT(004),        " ¿â´æµØ
**Ò»°ã¹¤³§Êý¾Ý/²Ö´¢1**
       AUSME(003),        " ·¢»õµ¥Î»
       UMREJ(006),        " »ù±¾µ¥Î»×ª»»Òò×Ó
       UMREF(006),        " ·¢»õµ¥Î»×ª»»Òò×Ó
       XCHPF(001),        " ÅúÁ¿¹ÜÀí
**MRP 1**
       DISGR(004),        " MRP×é
        DISMM(009),        " MRPÀàÐÍ
       FXHOR(003),        " ¼Æ»®µÄÊ±½ì
        DISPO(011),        " MRP¿ØÖÆÕß
        DISLS(004),        " ÅúÁ¿
        MAABC(007),        " ABC±êÊ¶
       BSTFE(018),        " ¹Ì¶¨ÅúÁ¿´óÐ¡
**MRP 2**
       RESKZ(001),        " »ñÈ¡ÀàÐÍ
        BESKZ(008),        " ²É¹ºÀàÐÍ
       SOBSL(002),        " ÌØÊâ²É¹ºÀà
       LGPRO(004),        " ·¢»õ²Ö´¢µØµã
       RGEKZ(001),        " ·´³å
        PLIFZ(012),        " ¼Æ»®½»»õÊ±¼ä
       VEBAZ(003),        " ÊÕ»õ´¦ÀíÊ±¼ä
        DZEIT(008),        "×ÔÖÆÉú²ú
        FHORI(010),        " ¼Æ»®±ß¼ÊÂë
       EISBE(018),        " °²È«¿â´æ
**MRP 3**
        PERKZ(008),        " ÆÚ¼ä±êÊ¶
        STRGR(006),        " ²ßÂÔ×é
       VRMOD(001),        " ÏûºÄÄ£Ê½
       VINT1(003),        " ÄæÏòÏûºÄÆÚ¼ä
       VINT2(003),        " ÏòÇ°ÏûºÄÆÚ¼ä
        NTVFP(010),        " ¿ÉÓÃÐÔ¼ì²é
**MRP 4**
       SAUFT(001),        " ÖØ¸´ÖÆÔì±êÖ¾
       SFEPR(004),        " ÖØ¸´Éú²ú²ÎÊýÎÄ¼þ
**¹¤×÷¼Æ»®**
       FEVOR(003),        " Éú²úµ÷¶ÈÔ±
       FRTME(003),        " Éú²úµ¥Î»
       SMREZ(006),        " »ù±¾µ¥Î»×ª»»Òò×Ó
       SMREN(006),        " Éú²úµ¥Î»×ª»»Òò×Ó
       UEETK(001),        " ÎÞÏÞÖÆ¹ýÁ¿½»»õ
**»á¼Æ 1**
        BKLAS(006),        " ÆÀ¹ÀÀà
       BWTTY(001),        " ¹À¼Û·ÖÀà
        VPRSV(008),        " ¼Û¸ñ¿ØÖÆ
        PEINH(008),        " ¼Û¸ñµ¥Î»
        VERPR(015),        " ÒÆ¶¯Æ½¾ù¼Û
        STPRS(015),        " ±ê×¼¼Û
**»á¼Æ 2**
       BWPRH(014),        " ÉÌÒµ¼Û¸ñ 1
**³É±¾ 1**
       LOSGR(018),        " ÅúÁ¿³É±¾ºËËã
**³É±¾ 2**
       ZPLP1(014),        " ¼Æ»®¼Û¸ñ 1
       ZPLD1(010),        " ¼Æ»®ÈÕÆÚ 1
**ÖÊÁ¿¹ÜÀí**
        ART1(8),            "¼ìÑéÀàÐÍ1
        AKTIV1(6),          "ÒÑ¼¤»î
        QMPUR(010),             "¼¤»î²É¹ºÖÐµÄ QM
        SSQSS(8),          "QM ¿ØÖÆÂë¡¢
       QMATV(8),          "QM¼ìÑéÉèÖÃ
       ART2(8),            "¼ìÑéÀàÐÍ2
       AKTIV2(6),          "ÒÑ¼¤»î
       ART3(8),            "¼ìÑéÀàÐÍ3
       AKTIV3(6),          "ÒÑ¼¤»î
      end of record1.
selection-screen begin of block 0 with frame title text-001.
selection-screen begin of line .
selection-screen position 1.
parameters: test like rkec1-test .
selection-screen
comment 3(4) text-004 for field test.
selection-screen position 26.
parameters: oldfile like rlgrap-filename.
selection-screen
comment 9(17) text-003 for field oldfile.
selection-screen: end of line.
selection-screen begin of line.
selection-screen position 1.
parameters: dnldflag like rkec1-test default 'X'.
selection-screen
comment 3(4) text-005 for field dnldflag.
selection-screen position 26.
parameters: outfile like rlgrap-filename .
selection-screen
comment 9(17) text-006 for field outfile.
selection-screen: end of line.
selection-screen end of block 0 .
SELECTION-SCREEN BEGIN OF BLOCK 1 WITH FRAME TITLE TEXT-002.
selection-screen begin of line.
selection-screen position 1.
PARAMETERS: GEN1 LIKE RKEC1-TEST.
selection-screen
comment 3(9) text-007 for field GEN1.
selection-screen position 26.
PARAMETERS: GEN2 LIKE RKEC1-TEST.
selection-screen
comment 28(9) text-008 for field GEN2.
selection-screen end of line.
selection-screen begin of line.
selection-screen position 1.
PARAMETERS: SALORG1 LIKE RKEC1-TEST.
selection-screen
comment 3(21) text-009 for field SALORG1.
selection-screen position 26.
PARAMETERS: SALORG2 LIKE RKEC1-TEST.
selection-screen
comment 28(21) text-010 for field SALORG2.
selection-screen position 51.
PARAMETERS: SALPLANT LIKE RKEC1-TEST.
selection-screen
comment 53(19) text-011 for field SALPLANT.
selection-screen end of line.
selection-screen begin of line.
selection-screen position 1.
PARAMETERS: PURCHASE LIKE RKEC1-TEST.
selection-screen
comment 3(21) text-012 for field PURCHASE.
selection-screen position 26.
PARAMETERS: PLTSTRG1 LIKE RKEC1-TEST.
selection-screen
comment 28(21) text-018 for field PLTSTRG1.
selection-screen end of line.
selection-screen begin of line.
selection-screen position 1.
PARAMETERS: MRP1 LIKE RKEC1-TEST.
selection-screen
comment 3(4) text-013 for field MRP1.
selection-screen position 13.
PARAMETERS: MRP2 LIKE RKEC1-TEST.
selection-screen
comment 15(4) text-014 for field MRP2.
selection-screen position 26.
PARAMETERS: MRP3 LIKE RKEC1-TEST.
selection-screen
comment 28(4) text-015 for field MRP3.
selection-screen position 37.
PARAMETERS: MRP4 LIKE RKEC1-TEST.
selection-screen
comment 39(4) text-016 for field MRP4.
selection-screen position 51.
PARAMETERS: PLANTSTR LIKE RKEC1-TEST.
selection-screen
comment 53(8) text-017 for field PLANTSTR.
selection-screen end of line.
selection-screen begin of line.
selection-screen position 1.
PARAMETERS: QAU LIKE RKEC1-TEST.
selection-screen
comment 3(8) text-023 for field QAU.
selection-screen position 13.
PARAMETERS: ACC1 LIKE RKEC1-TEST.
selection-screen
comment 15(5) text-019 for field ACC1.
selection-screen position 26.
PARAMETERS: ACC2 LIKE RKEC1-TEST.
selection-screen
comment 28(5) text-020 for field ACC2.
selection-screen position 37.
PARAMETERS: COR1 LIKE RKEC1-TEST.
selection-screen
comment 39(5) text-021 for field COR1.
selection-screen position 51.
PARAMETERS: COR2 LIKE RKEC1-TEST.
selection-screen
comment 53(5) text-022 for field COR2.
selection-screen end of line.
SELECTION-SCREEN END OF BLOCK 1.
at selection-screen on value-request for oldfile.
call function 'KD_GET_FILENAME_ON_F4'
       EXPORTING
            mask      = ',ÎÄ±¾ÎÄ¼þ(ÖÆ±í·û·Ö¸ô),*.txt'
            static    = 'X'
       CHANGING
            file_name = oldfile.
at selection-screen on value-request for outfile.
call function 'KD_GET_FILENAME_ON_F4'
       EXPORTING
            mask      = ',Microsoft Excel¹¤×÷²¾,*.xls'
            static    = 'X'
       CHANGING
            file_name = outfile.
initialization.
******µÃµ½ÎÄ¼þÄ¿Â¼*******
call function 'WS_QUERY'
       EXPORTING
            query = 'CD'
       IMPORTING
            return = outfile.
if sy-subrc <> 0.
    message e005 with outfile.
endif.
oldfile = outfile.
concatenate outfile 'mat_fat' into outfile.
*ÅúÊäÈëÄ¬ÈÏÃû³Æ
group = 'MATBATCHIN'.
start-of-selection.
if dnldflag eq 'X' and not ( outfile is initial ).
    perform download_data.
    stop.
endif.
perform upload_data.
if test = ' '.
*ÊÓÍ¼²ÎÊý¼ì²é
    IF ( GEN1 NE 'X' AND GEN2 NE 'X' AND SALORG1 NE 'X'
       AND SALORG2 NE 'X' AND SALPLANT NE 'X'
       AND PURCHASE NE 'X' AND PLTSTRG1 NE 'X'
       AND MRP1 NE 'X' AND MRP2 NE 'X' AND MRP3 NE 'X'
           AND MRP4 NE 'X' AND PLANTSTR NE 'X'
       AND ACC1 NE 'X' AND ACC2 NE 'X'
       AND COR1 NE 'X' AND COR2 NE 'X' and qau ne 'X' ) .
      MESSAGE E000 WITH 'ÇëÑ¡ÔñÐèÎ¬»¤ÊÓÍ¼'.
    ENDIF.
    perform open_group.
    SORT RECORD BY WERKS MATNR.
    loop at record.
      perform bdc_fill.
      perform bdc_transaction using 'MM01'.
      clear: bdcdata.
      refresh: bdcdata.
    endloop.
    perform close_group.
else.
    perform file_check.
endif.
end-of-selection.
*&      Form UPLOAD_DATA
      ÉÏÔØÅúÊäÈëÊý¾Ý
--> p1        text
<-- p2        text
form upload_data.
call function 'WS_UPLOAD'
       EXPORTING
            filename                = oldfile
            filetype                = 'DAT'
       TABLES
            data_tab                = record
       EXCEPTIONS
            conversion_error        = 1
            file_open_error         = 2
            file_read_error         = 3
            invalid_table_width     = 4
            invalid_type            = 5
            no_batch                = 6
            unknown_error           = 7
            gui_refuse_filetransfer = 8
            customer_error          = 9
            others                  = 10.
if sy-subrc <> 0.
    message E000 with 'ÇëÊäÈëÉÏÔØÎÄ¼þ'.
endif.
read table record with key MATNR = '**'.
if sy-tabix lt 1.
    message E000 with 'ÉÏÔØÎÄ¼þÎÄ¼þÍ·ÓëÊý¾ÝÖ®¼äÎÞ**'.
endif.
delete record from 1 to sy-tabix.
endform.                               " UPLOAD_DATA
*&      Form BDC_FILL
      ÅúÊäÈë
--> p1        text
<-- p2        text
form bdc_fill.
data: N type I,
        M type I,
        S_MATNR(018),
        test(1) type N.
PERFORM BDC_FILL_INITALSCR.    "³õÊ¼ÆÁÄ»
tmp = '0'.
condense record-matnr no-gaps.
test = record-matnr(1).
if test <> ''.
    M = STRLEN( RECORD-MATNR ).
    M = 18 - M.
    DO M TIMES.
      CONCATENATE '0' RECORD-MATNR INTO S_MATNR.
      RECORD-MATNR = S_MATNR.
    ENDDO.
endif.
**ÅÐ¶ÏÎïÁÏ»ù±¾ÊÓÍ¼ÊÇ·ñÒÑ¾±»Î¬»¤¹ý**
SELECT SINGLE * FROM MARA WHERE MATNR = RECORD-MATNR.
IF SY-SUBRC NE 0.
    K = '0'.
Else.
    condense MARA-PSTAT no-gaps.
    N = strlen( mara-pstat ).
    M = 0.
    record-meins = mara-meins.
    do N times.
      K = MARA-PSTAT+M.
      IF K = 'K'.
        EXIT.
      ENDIF.
      M = M + 1.
    enddo.
ENDIF.
IF ( ( GEN1 EQ 'X' OR GEN2 EQ 'X' ) AND SALORG1 NE 'X'
     AND SALORG2 NE 'X' AND SALPLANT NE 'X'
     AND PURCHASE NE 'X' AND PLTSTRG1 NE 'X'
     AND MRP1 NE 'X' AND MRP2 NE 'X' AND MRP3 NE 'X'
         AND MRP4 NE 'X' AND PLANTSTR NE 'X'
     AND ACC1 NE 'X' AND ACC2 NE 'X'
     AND COR1 NE 'X' AND COR2 NE 'X' and qau ne 'X' ) .
    IF K EQ 'K'.
      perform bdc_dynpro      using 'SAPLMGMM' '0070'.
      perform bdc_field       using 'BDC_CURSOR'
                                    'MSICHTAUSW-DYTXT(15)'.
      perform bdc_field       using 'BDC_OKCODE'
                                    '/N'.
    ELSE.
      PERFORM BDC_FILL_CHOICEVIEW.   "Ñ¡ÔñÊÓÍ¼
    ENDIF.
ELSE.
    PERFORM BDC_FILL_CHOICEVIEW.   "Ñ¡ÔñÊÓÍ¼
    PERFORM BDC_FILL_ORGVIEW.      "×éÖ¯¼¶±ð
ENDIF.
TRANSLATE record-MEINS TO UPPER CASE.
TRANSLATE record-BSTME TO UPPER CASE.
TRANSLATE record-VRKME TO UPPER CASE.
TRANSLATE record-FRTME TO UPPER CASE.
TRANSLATE record-AUSME TO UPPER CASE.
if gen1 eq 'X'.
    IF K NE 'K'.
      PERFORM GENERALDATA1.
    ENDIF.
endif.
if gen2 eq 'X'.
    IF K NE 'K'.
      perform generaldata2.
    ENDIF.
endif.
if salorg1 eq 'X'.
    perform salorg1.
endif.
if salorg2 eq 'X'.
    perform salorg2.
endif.
if salplant eq 'X'.
    perform salplant.
endif.
if purchase eq 'X'.
    perform purchasedata.
endif.
if mrp1 eq 'X'.
    perform MRP1.
endif.
if mrp2 eq 'X'.
    perform MRP2.
endif.
if mrp3 eq 'X'.
    perform MRP3.
endif.
if mrp4 eq 'X'.
    perform MRP4.
endif.
if PLANTSTR eq 'X'.
    perform PLANTSTR.
endif.
if PLTSTRG1 eq 'X'.
    perform PLTSTRG1.
endif.
if qau eq 'X'.
    perform qualitydata.
endif.
if ACC1 eq 'X'.
    perform ACC1DATA.
endif.
if ACC2 eq 'X'.
    perform ACC2DATA.
endif.
if COR1 eq 'X'.
    perform COR1DATA.
endif.
if COR2 eq 'X'.
    perform COR2DATA.
endif.
perform BDC_SAVE.
endform.                               " BDC_FILL
*&      Form GENERALDATA1
      Ò»°ãÊý¾Ý 1
--> p1        text
<-- p2        text
form generaldata1.
perform bdc_dynpro      using 'SAPLMGMM' '4004'.
perform bdc_field       using 'BDC_OKCODE'
                                "'=ZU01'.
                                '/00'.
perform bdc_field       using 'MAKT-MAKTX'
                                record-MAKTX.       " ÎïÁÏÃèÊö
perform bdc_field       using 'MARA-MEINS'
                                record-MEINS.       " »ù±¾¼ÆÁ¿µ¥Î»
perform bdc_field       using 'MARA-MATKL'
                                record-MATKL.       " ÎïÁÏ×é
perform bdc_field       using 'MARA-BISMT'
                                record-BISMT.
perform bdc_field       using 'MARA-EXTWG'
                               record-EXTWG.
perform bdc_field       using 'MARA-SPART'
                               record-SPART.
perform bdc_field       using 'MARA-MTPOS_MARA'
                                record-MTPOS_MARA.
perform bdc_field       using 'BDC_CURSOR'
                                'MARA-GROES'.
perform bdc_field       using 'MARA-BRGEW'
                                record-BRGEW.
if record-gewei = '' and ( salorg1 = 'X' or salorg2 = 'X'
                       or salplant = 'X' ).
    perform bdc_field       using 'MARA-GEWEI'
                                  'KG'.              " ÖØÁ¿µ¥Î»
else.
    perform bdc_field       using 'MARA-GEWEI'
                                  record-GEWEI.      " ÖØÁ¿µ¥Î»
endif.
perform bdc_field       using 'MARA-NTGEW'
                                record-NTGEW.
perform bdc_field       using 'MARA-VOLUM'
                                record-VOLUM.
perform bdc_field       using 'MARA-VOLEH'
                                record-VOLEH.
perform bdc_field       using 'MARA-GROES'
                                record-GROES.
condense record-EAN11 no-gaps.
if record-EAN11 <> ''.
   perform bdc_field       using 'MARA-EAN11'
                                 record-EAN11.
   perform bdc_field       using 'MARA-NUMTP'
                                 'HT'.
endif.
perform bdc_field       using 'MARA-MAGRV'
                                record-MAGRV.
perform bdc_dynpro      using 'SAPLMGMM' '4300'.
perform bdc_field       using 'BDC_OKCODE'
                               '=ZU02'.
condense record-EAKTX no-gaps.
if record-EAKTX <> ''.
   perform bdc_field       using 'SKTEXT-SPRAS(2)'
                                 'EN'.
   perform bdc_field       using 'SKTEXT-MAKTX(2)'
                                 record-EAKTX.
endif.
perform bdc_dynpro      using 'SAPLMGMM' '4300'.
perform bdc_field       using 'BDC_OKCODE'
                               '=MAIN'.
if record-meins <> 'PAK'.
   perform bdc_field       using 'SMEINH-UMREN(05)'
                                 '1'.
   perform bdc_field       using 'SMEINH-MEINH(05)'
                                 'PAK'.
   perform bdc_field       using 'SMEINH-UMREZ(05)'
                                 '1'.
endif.
perform bdc_dynpro      using 'SAPLMGMM' '4004'.
perform bdc_field       using 'BDC_OKCODE'
                                '/00'.
endform.                               " GENERALDATA
*&      Form generaldata2
      Ò»°ãÊý¾Ý 2
--> p1        text
<-- p2        text
FORM generaldata2.
perform bdc_dynpro      using 'SAPLMGMM' '4004'.
perform bdc_field       using 'BDC_OKCODE'
                                '/00'.
perform bdc_field       using 'MAKT-MAKTX'
                                record-MAKTX.
perform bdc_field       using 'BDC_CURSOR'
                                'MARA-NORMT'.
condense record-ferth no-gaps.
if record-ferth <> ''.
    perform bdc_field       using 'MARA-FERTH'
                                  record-FERTH.
endif.
perform bdc_field       using 'MARA-NORMT'
                                record-NORMT.
perform bdc_field       using 'MARA-WRKST'
                                record-WRKST.
perform bdc_field       using 'MARA-ZEIAR'
                               record-ZEIAR.
ENDFORM.                    " generaldata2
*&      Form salorg1
      ÏúÊÛ×éÖ¯ 1
--> p1        text
<-- p2        text
FORM salorg1.
condense RECORD-SPART no-gaps.
PERFORM BDC_DYNPRO      USING 'SAPLMGMM' '4000'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                '/00'.
PERFORM BDC_FIELD       USING 'MAKT-MAKTX'
                                RECORD-MAKTX.     " ÎïÁÏÃèÊö
IF K NE 'K'.
    perform bdc_field       using 'MARA-MEINS'
                                  record-MEINS.   " »ù±¾¼ÆÁ¿µ¥Î»
ENDIF.
perform bdc_field       using 'MARA-SPART'
                                record-SPART.     " ²úÆ·×é
perform bdc_field       using 'MVKE-DWERK'
                                record-DWERK.     " ½»»õ¹¤³§
PERFORM BDC_FIELD       USING 'MG03STEUER-TAXKM(01)'
                                RECORD-TAXKM.     " ÎïÁÏË°·ÖÀà
condense RECORD-VRKME no-gaps.
IF RECORD-MEINS <> RECORD-VRKME and RECORD-VRKME <> ''.
   perform bdc_field       using 'MVKE-VRKME'
                                 record-VRKME.     " ÏúÊÛµ¥Î»
   select single * from MARM where matnr = record-matnr
                 and meinh = record-vrkme.
   if SY-SUBRC NE 0.
     tmp = 'W'.
     select single * from t006 where MSEHI = record-meins.
     if t006-DIMID = 'AAAADL'.
       DIMID = ''.
     else.
       DIMID = t006-DIMID.
     endif.
     select single * from t006 where MSEHI = record-vrkme.
     if dimid <> t006-DIMID.
       PERFORM BDC_DYNPRO      USING 'SAPLMGMM' '0510'.
       PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                     '=ENTR'.
       perform bdc_field       using 'RMMZU-UMREN'
                                     record-VMREN. "ÏúÊÛµ¥Î»×ª»»Òò×Ó
       perform bdc_field       using 'RMMZU-UMREZ'
                                     record-VMREZ. "»ù±¾µ¥Î»×ª»»Òò×Ó
       PERFORM BDC_DYNPRO      USING 'SAPLMGMM' '4000'.
       PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                     '/00'.
     endif.
   endif.
ENDIF.
perform bdc_dynpro      using 'SAPLMGMM' '4200'.
perform bdc_field       using 'BDC_OKCODE'      " µ÷ÓÃË°Àà×ÓÆÁÄ»
                                '/00'.
PERFORM BDC_DYNPRO      USING 'SAPLMGMM' '4000'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'      " ·µ»ØÏúÊÛ×éÖ¯ 1ÆÁÄ»
                                '/00'.
ENDFORM.                                                    " salorg1
*&      Form salorg2
      ÏúÊÛ×éÖ¯ 2
--> p1        text
<-- p2        text
FORM salorg2.
PERFORM BDC_DYNPRO      USING 'SAPLMGMM' '4000'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                '/00'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                'MVKE-KTGRM'.
PERFORM BDC_FIELD       USING 'MVKE-VERSG'
                               RECORD-VERSG.     " ÎïÁÏÍ³¼Æ×é
PERFORM BDC_FIELD       USING 'MVKE-KTGRM'
                                RECORD-KTGRM.     " ¿ÆÄ¿ÉèÖÃ×é
PERFORM BDC_FIELD       USING 'MVKE-KONDM'
                                RECORD-KONDM.     " ÎïÁÏ¶¨¼Û×é
perform bdc_field       using 'MVKE-MTPOS'
                                RECORD-MTPOS.     " ÏîÄ¿Àà±ð×é
PERFORM BDC_FIELD       USING 'MVKE-MVGR1'
                               RECORD-MVGR1.               " ÎïÁÏ×é 1
PERFORM BDC_FIELD       USING 'MVKE-MVGR2'
                               RECORD-MVGR2.               " ÎïÁÏ×é 2
ENDFORM.                                                    " salorg2
*&      Form salplant
      ÏúÊÛ£ºÒ»°ã/¹¤³§Êý¾Ý
--> p1        text
<-- p2        text
FORM salplant.
PERFORM BDC_DYNPRO      USING 'SAPLMGMM' '4000'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                '/00'.
select single * from marc where matnr = record-matnr
                              and werks = record-werks.
if SY-SUBRC NE 0 OR MARC-MTVFP = ''.
    PERFORM BDC_FIELD       USING 'MARC-MTVFP'
                                  RECORD-MTVFP.     " ¿ÉÓÃÐÔ¼ì²é
endif.
PERFORM BDC_FIELD       USING 'MARA-TRAGR'
                                  RECORD-TRAGR.   " ÔËÊä×é
PERFORM BDC_FIELD       USING 'MARC-LADGR'
                                RECORD-LADGR.     " ×°ÔØ×é
perform bdc_field       using 'MARC-XCHPF'
                                record-XCHPF.     " ÅúÁ¿¹ÜÀí
ENDFORM.                    " salplant
*&      Form PURCHASEDATA
      ²É¹ºÊý¾Ý
--> p1        text
<-- p2        text
form purchasedata.
perform bdc_dynpro      using 'SAPLMGMM' '4000'.
perform bdc_field       using 'BDC_OKCODE'
                                '/00'.
perform bdc_field       using 'BDC_CURSOR'
                                'MARC-WEBAZ'.
perform bdc_field       using 'MAKT-MAKTX'
                                record-MAKTX.
IF K NE 'K'.
    perform bdc_field       using 'MARA-MEINS'
                                  record-MEINS.     " »ù±¾¼ÆÁ¿µ¥Î»
    perform bdc_field       using 'MARA-MATKL'
                                  record-MATKL.     " ÎïÁÏ×é
ENDIF.
condense RECORD-BSTME no-gaps.
IF RECORD-MEINS <> RECORD-BSTME and RECORD-BSTME <> ''.
   perform bdc_field       using 'MARA-BSTME'
                                 record-BSTME.     " ¶©µ¥µ¥Î»
   select single * from MARM where matnr = record-matnr
                 and meinh = record-bstme.
   if SY-SUBRC NE 0 and
         ( record-vrkme <> record-bstme or tmp <> 'W' ).
     tmp = 'W'.
     select single * from t006 where MSEHI = record-meins.
     if t006-DIMID = 'AAAADL'.
       DIMID = ''.
     else.
       DIMID = t006-DIMID.
     endif.
     select single * from t006 where MSEHI = record-bstme.
     if dimid <> t006-DIMID.
       PERFORM BDC_DYNPRO      USING 'SAPLMGMM' '0510'.
       PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                     '=ENTR'.
       perform bdc_field       using 'RMMZU-UMREN'
                                     record-UMREN. "¶©µ¥µ¥Î»×ª»»Òò×Ó
       perform bdc_field       using 'RMMZU-UMREZ'
                                     record-UMREZ. "»ù±¾µ¥Î»×ª»»Òò×Ó
       PERFORM BDC_DYNPRO      USING 'SAPLMGMM' '4000'.
       PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                     '/00'.
     endif.
   endif.
ENDIF.
perform bdc_field       using 'MARC-EKGRP'
                                record-EKGRP.       " ²É¹º×é
perform bdc_field       using 'MARC-WEBAZ'
                               record-WEBAZ.       " ÊÕ»õ´¦ÀíÊ±¼ä
endform.                               " PURCHASEDATA
*&      Form MRP1
      text
--> p1        text
<-- p2        text
FORM MRP1.
perform bdc_dynpro      using 'SAPLMGMM' '4000'.
perform bdc_field       using 'BDC_OKCODE'
                                '/00'.
perform bdc_field       using 'MAKT-MAKTX'
                               record-MAKTX.       " ÎïÁÏÃèÊö
IF K NE 'K'.
   perform bdc_field       using 'MARA-MEINS'
                                 record-MEINS.     " »ù±¾µ¥Î»
ENDIF.
perform bdc_field       using 'MARC-DISGR'
                               record-DISGR.       " MRP×é
perform bdc_field       using 'MARC-MAABC'
                                record-MAABC.       " ABC±êÊ¶
perform bdc_field       using 'MARC-DISMM'
                                record-DISMM.       " MRPÀàÐÍ
perform bdc_field       using 'MARC-FXHOR'
                               record-FXHOR.       " ¼Æ»®µÄÊ±½ì
perform bdc_field       using 'MARC-DISPO'
                                record-DISPO.       " MRP¿ØÖÆÕß
perform bdc_field       using 'MARC-DISLS'
                                record-DISLS.       " ÅúÁ¿
perform bdc_field       using 'MARC-BSTFE'


Here is a sample program which creates a material with the bare minmal fields, this will get you started.
report zrich_0003 .
data: headdata type bapimathead.
data: clientdata type bapi_mara.
data: clientdatax type bapi_marax.
data: descdata type table of BAPI_MAKT with header line.
data: return type bapiret2 .
data: returnm type table of bapi_matreturn2 with header line.
data: xmara type mara.
parameters: p_matnr type mara-matnr.
headdata-material        = p_matnr.
headdata-ind_sector      = 'M'.
headdata-matl_type       = 'FERT'.
headdata-basic_view = 'X'.
clientdata-BASE_UOM   = 'EA'.
clientdatax-BASE_UOM   = 'X'.
clientdata-old_mat_no = 'Old Material'.
clientdatax-old_mat_no = 'X'.
clientdata-division = '00'.
clientdatax-division = 'X'.
descdata-LANGU = sy-langu.
descdata-MATL_DESC = 'This is the description'.
append descdata.
call function 'BAPI_MATERIAL_SAVEDATA'
exporting
    headdata                   = headdata
    clientdata                 = clientdata
    clientdatax                = clientdatax
*   PLANTDATA                  =
*   PLANTDATAX                 =
*   FORECASTPARAMETERS         =
*   FORECASTPARAMETERSX        =
*   PLANNINGDATA               =
*   PLANNINGDATAX              =
*   STORAGELOCATIONDATA        =
*   STORAGELOCATIONDATAX       =
*   VALUATIONDATA              =
*   VALUATIONDATAX             =
*   WAREHOUSENUMBERDATA        =
*   WAREHOUSENUMBERDATAX       =
*   SALESDATA                  =
*   SALESDATAX                 =
*   STORAGETYPEDATA            =
*   STORAGETYPEDATAX           =
importing
   return                     = return
tables
    MATERIALDESCRIPTION        = descdata
*   UNITSOFMEASURE             =
*   UNITSOFMEASUREX            =
*   INTERNATIONALARTNOS        =
*   MATERIALLONGTEXT           =
*   TAXCLASSIFICATIONS         =
    returnmessages             = returnm
*   PRTDATA                    =
*   PRTDATAX                   =
*   EXTENSIONIN                =
*   EXTENSIONINX               =
check sy-subrc = 0.
Regards,
Rich Heilman

Add a custom field to Business Partner(master data screen)

Hi MM experts,
My requirement: Basically have to pass special accounting number (from FI module to MM module ). For that, we need to create new custom field in the standard screen (master data) of business partner.
How to achieve this?
Is that by creating field exit (create a new field in the standard screen and updating business partner master data with this special accounting number)? IF so, could you please explain how to achieve this little bit clearly?
THANKS IN ADVANCE... YOUR INPUT IS HIGHLY APPRECIATED.

Hello Solemn,
You should catch the FormLoad event of form 134 (Business Partner), and add a static text and editbox. In addition, you need to do the data binding right after adding the item.
Or, you just use the standard UDF function of B1.
Hope this helps,
Nick

Load master data on server startup

need to store the master data in cache on server restart
any help would be arretiated.
Thanks

Try to implement a javax.servlet.ServletContextListener and inside implementation of
public void contextInitialized(ServletContextEvent sce) method write your Code to Pull up master data from respective Datasource bind it to a Java Object Something like a JavaBean or some random Collection class would be appropriate & finally save it under the scope of ServletContext or use a Static type to cache the Master data Object in the memory.
Adn configure the Listner in your web.xml accordingly.
Or
Write your code inside init(ServletConfig config) method of a servlet and make sure you configure the servlet in such a way that it executes init(ServletConfig config) method at the time of intialization (in web.xml under servlet configuration you use <load-on-startup/>)
and the rest if same as that of what i mentioned for ServletContext listener.
Hope that might answer your question.
REGARDS,
RaHuL

Can not find master data in the cube

ItemNo is an navigation attribute of 0Material. We are using 0material in a cube. When I display the cube data include ItemNo, I don't find the data I am looking for. For example:
In 0Material:
0Material      ItemNo    Description
AAA                001           Test
BBB                002           Test
In the cube I expect to see:
0Material             ItemNo            On Hand Qty
AAA                      001                      1000
BBB                      002                       2000
Instead I saw:
0Material             ItemNo            On Hand Qty
AAA                                                1000
BBB                                                2000
0Material got refreshed after cube data got loaded. Is that why I don't find the refreshed Master data?
Thank you!

Hi,
When you laod the cube, the Values for Master are automatically get created in the master data (If they are not present earlier and with "Data Update Type in the Data Tragets" setting in InfoPackage).
Now when you are loading your cube with 0Material and Item Number, the values for Item Number seems blank. Thats the reason why you are not able to see the Item Number in Cube though it is present in Master. Because now these are two different keys, one with Item Number value and other without Item Number value.
Regards,
Yogesh.

Master data is not getting displayed in the Report in Quality

HI Experts,
I have ZESP_Num as master for my transaction data.
I have loaded the data in the Development and designed and checked my report. It is working fine.
But after moving it to Quality. My report is not getting the master data.
When I try to do right click manage ZESP_Num.
I'm getting message like this.
The data from the InfoProvider ZESP_NUM involved could not be checked
Message no. DBMAN242
Diagnosis
A participating InfoProvider is virtual and aggreement between results and selections cannot be guaranteed.
Can anyone plz help me.
Thanks

Hi,
Please check the SNOTE Note 1364083 u2013 Message text will appear unexpectedly in surface.
Hope helpful.
Regards,
RAO

Master data is not getting displayed in the Query Designer

Hi,
I have a DSO in which I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No. master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
Thanks

Hi,
I have brought the Emp. No. in the Key Field and also have activate the master data again.
Yet my Query Designer doesn't have the Emp. No.
I have done a full load for both Master and Transaction.
Please advice me what the other alternative.
Thanks

Error while creating money market transaction - payment details not retrieving from BP master data.

Hello friends
I have error while creating financial transaction. Payment details are not retrieving from BP master data to creating financial transaction screen.
No payment details entered for transaction
Message no. FTR0030
Please advise to set off this.
Thanks & Regards
Swami

Dear Swami,
Please select one payment details in Business partner and use assigned tab from top selection parameter from standing instruction to assigned bank details to product type.
It will open other window like above example for each product of treasury, then assign bank details to product. Once assigned and save.
System will pick payment details in deal automatically based on business partner.
Hope this solve your issue.
Regards,
Jain
Message was edited by: Jain Varghese

Error while deleting master data (Message no. RSDMD118)

Dear all,
I am performing a test to create and delete new Company Codes in Consolidation Workbench.
Creation of new Company Codes went on successfully but deleting them give me the following error message upon saving:
Error while deleting master data
Message no. RSDMD118
Since they are new Company Codes, they have not been used and stored in any BW cubes. Any idea on why BCS prevents me from deleting them?
Appreciate assistance to troubleshoot and resolve this error.
Thank you.

Thank you both for your replies.
I am sure those are not the case here as I deleted the Company immediately after creating it.
Just to make sure, I performed "Where-Used List" again and BCS confirmed that it is not being used anywhere:
Use of: Company UAT1 UAT Company 1
Number of Uses Found: 0
However, the same error message was displayed again after I tried to delete the Company and save the configuration. Still can't find any solid reason behind this.

Error while deleting the Master data

Hi Friends,
i am getting the below error while deleting the data from a master data:-
The system is unable to delete all of the specified master data,because some of it is still in use. (See log:Object RSDMD, sub-object MD_DEL )
Do you want to delete the data records that are no longer in use?
Could you guide how should i proceed to delete the data.
Regards,
Hirdesh

Hi Hirdesh,
If you are using master data in someother data targets u cant delete master data.So first you have to delete the data in data targets where this particual master data object is used, then remove the data in master data object.
Regards
Prasad

Creation of Assets master Data

Dear All,
Now we need to upload master data for Asset materials, which we are treating as UNBW Mat type (Non valuated materials). If we want to sell it after 1 Year & then what is the procedure ? In UNBW mat type there is no sales views maintained.
pls exp me
regds,
Channa

hi,
Do try to create the new material type with your specified view, you may also copy the exisisting the mataerial types, so that the you can get few of the default settings automatically and for few you can make changes...
Regards
Priyanka.P

What are the dependent master data for running MRP

Hi Experts,
My client wants to Run MRP After 8 Months of implementation. Now i want to know
1) What are the Master Data need to be check. They are Using the Strategy 20.
2) They have confirmed sales order for few customers. Forecast sales orders for few customers.How to map it in sap.
3) Where will i get Gross Requirement in SAP. Because MRP run will generates the net requirements.
4) Is there any report in SAP displays the Forecast values for the selected material.
Please help me on the above points.
Thanks
Satheesh

HI Vishwa Upadhyay,
Thank you Once again,
The first point is cleared. Can you please suggest me on the 2,3& 4 points please. What are the configuration settings needed for the different sales order type( i.e.. confirmed and forecast)
Thanks
Satheesh.N

What are the tables will update while loading Master data ?

Hello Experts,
What are the tables will update while loading Master data ? And requesting you to provide more information about Master data loading and its related settings in the beginning of creation infoobjects.

It depends upon the type of Master data u r loading....
In all the master data loadings, for every new value of master data an SID will be created in the SID table /BI*/S<INFOOBJECT NAME> irrespective of the type of master data.
But the exceptional tables that get updated depending on the type of master data are.....
If it is a time Independent master data then the /BI*/P<INFOOBJECT NAME> table gets updated with the loaded data.
If it is a time dependent master data then the /BI*/Q<INFOOBJECT NAME> table gets updated with the loaded data.
If the master data is of time Independent Navigational attributes then for every data load the SID table will get updated first and then the /BI*/X<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
If the master data is of time dependent navigational attributes then for every data load the SID table will get updated first and then the /BI*/Y<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
NOTE: As said above, For all the data in P, Q, T, X, Y tables the SID's will be created in the S table /BI*/S<INFOOBJECT NAME>
NOTE: Irrespective of the time dependency or Independency the VIEW /BI*/M<INFOOBJECT NAME> defined on the top of /BI*/P<INFOOBJECT NAME> & /BI*/Q<INFOOBJECT NAME> tables gives the view of entire master data.
NOTE: it is just a View and it is not a Table. So it will not have any physical storage of data.
All the above tables are for ATTRIBUTES
But when it comes to TEXTS, irrespective of the Time dependency or Independency, the /BI*/T<INFOOBJECT NAME> table gets updated (and of course the S table also).
Naming Convention: /BIC/*<InfoObject Name> or /BI0/*<InfoObject Name>
C = Customer Defined Characteristic
0 = Standard or SAP defined Characteristic
* = P, Q, T, X,Y, S (depending on the above said conditions)
Thanks & regards
Sasidhar

Static Master data

Similar Messages

Maybe you are looking for