Static on all phones

I have VZ digital phone service and VZ DSL.
I have static on all my phones, and even when I plug a phone into the Network Interface Device (NID) It initially is just a slight static, but the longer I'm on the phone the worse the static gets. After 15-20 minutes, it's almost too much to deal with and you have to hang up the phone.
I have had the DSL service since Feb 2005. Is it possible that the DSL filters are bad? Or since I have static at the NID, does that mean that the static is coming from lines outside my house?

if it's static at the NID device, then it's static from outside the house.

Similar Messages

While on speakerphone, the external speaker became fuzzy with static. The phone is updated, and I've turned it on and off several times. It is still full of static. Please help.

While on speakerphone, the external speaker became full of static, and the phone cannot play music either to the external speaker. When the headphones are plugged in, you can then listen to music and old voice mail messages. It's updated with the current version. I've turned it off and on several times, but the external speaker is still full of static. It has not gotten wet at all. Please help!

try an other phone on the extern speaker , probably the speaker is not working as it should .

I have three iPhones using the same iTunes account, can we set something so that we are not all getting everyones txt messages to all phones?

I have three iPhones using the same iTunes account, can we set something so that all our txt messages are not appearing on all phones?

Settings > Messages > Receive At...
Any iPhone that lists the same email will receive the same texts. This has to be changed in order to stop receiving on all devices.

I just upgraded my iPhone4 iOs and lost ALL Phone Contacts! How can I get them back?

HELP! I've been using my iPhone consistently for ALL phone numbers, since I have serious memory problems due to fibromyalgia. I upgraded my phone last night finally, having moved my photos out of it I had the space to download and install the upgrade.
I got a nasty shock this morning when I tried to make a routine call and found ALL of my phone contacts missing. They don't seem to be either in the cloud or in the phone. What happened? It said it was storing them in the cloud but they're all gone! How can I get them back?
IF this normally happens, why should I ever upgrade? Seriously! I didn't think to copy all of it out manually before upgrading, I'd upgraded once before without any problems. Addresses and other details gone too. I've got four numbers in "Favorites" but no context for them beyond location by state. I don't even know who they are - can't recognize just the numbers.

Thanks, but I checked iCloud and it has none of them.
If it backed up to my laptop, that died and I just got the new computer. The one that's crashed won't even boot, so there's no way to even tell if it was syncing the contacts along with all the phone photos. Literally happened at the same time - it was because I had the new computer that I was finally able to pull the photos off the phone and make room for the upgrade. It had refused to upgrade for lack of space for some time.
I had thought it was set to sync to iCloud but it vanished from BOTH my phone and the cloud. That's why I'm so angry about it.

TS4268 I am able to imessage from my ipad all phone numbers in contacts but one. With it a get an error message that say "number is not registered with imessage". However I am able to imessage that number from my iphone. Any suggestions?

I am able to imessage from my ipad all phone numbers in contacts but one. With it I get an error message that says "number is not registered with imessage". However, I am able to imessage that number from my iphone. Any suggestion?

Hey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David

TS1702 i have erased my all phone contact list and then the message comes that it will be deleted with in an hour. but now my phone is not starting and only the apple logo appears on the screen. what should i do now..!

i have erased my all phone contact list and then the message comes that it will be deleted with in an hour. but now my phone is not starting and only the apple logo appears on the screen. what should i do now..!

That number is for an apple server in the UK that is used for iMessage activation. A hidden SMS is snet to that number when you turn iMessage on and is used to verify your phone number. I suggest you turn iMessage off. In settings/phone turn on dial assist. Check with your carrier to see if you can send an international SMS as you end that possibility to activate iMessage. Rest your phone (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).) then turn iMessage back on.

How to reboot all phones in the enterprise thry CM

Is there a way thru CM to reboot all phones?
We just applied a patch to CM and are now seeing some lag time when a new phone first boots up and see it applying and update on the phone.

Hi Joe,
One good way to reset phones in bulk is by using BAT
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/bat/7_1_2/t03phrst.html
Cheers!
Rob

In CCM, Associate User with All Phones

This is 1 of 2 threads I am starting.
1. (this thread) asks for guidance in associating a User with all IP Phones in order for them to obtain authentication before allowing XML to be pushed to them.
2. (in a separate thread) asks for guidance in issuing the push to the IP Phone, regarding getting the base64 User:Password inserted into the HTTP pkt.
Thread 1:
I want to push a CiscoIPPhoneExecute to IP Phones. I am having trouble authenticating. I know that in order to authenticate (UserID,Password) I must add a User (with User ID and Password) to CCM and associate it with all IP Phones. My CCM ver is System version: 5.1.1.2000-2.

How do you want to do that? Manually or do you want to write a software that does it automatically?
To do it automatically you need AXL. First you need to look up which devices your application user is already associated with.. you run the following query (taken directly from productive java code):
private String getDeviceAssociationSqlString(String ctiUser)
StringBuilder sb = new StringBuilder();
sb.append("SELECT dev.name FROM device dev INNER JOIN applicationuserdevicemap adm ON adm.fkdevice = dev.pkid AND tkuserassociation = 1 ");
sb.append("INNER JOIN applicationuser a ON a.pkid = adm.fkapplicationuser AND a.name='" + ctiUser + "'");
return sb.toString();
You do an executeSqlQuery with that query and parse the results (the response will look something like
SEP123SEP124/row>..
Then you look up all devices, e.g. by sending a query like
SELECT name FROM device WHERE name LIKE 'SEP%'
(the where clause is to only include IP phones..the device table also contains gateways, analog ports, etc. and we don't want that.. not that this query includes third party sip phones which doesn't make too much sense.. but it won't cause any problems either.. I know because we run that code on a system with third party sip phones).
Then you do a delta between the two lists and if the second query yielded more results than the first, you need to associate the application user with that phone. There's no direct way in AXL (there used to be in CCM4 but no longer in CCM5+ because we now use application users.. you could theoretically use end users where you can still use updateUser, however it's not a good idea to mix application and regular users).
So.. you need to update the SQL database directly.. and run executeSqlUpdate via axl. The query to add phone deviceName to application user ctiUser is:
private String getAddDeviceAssociationSqlString(String deviceName)
StringBuilder sb = new StringBuilder();
sb.append("INSERT INTO applicationuserdevicemap (fkapplicationuser, fkdevice, tkuserassociation) VALUES((SELECT pkid from applicationuser WHERE name = '");
sb.append(config.ctiUser);
sb.append("'), (SELECT pkid FROM device WHERE name = '");
sb.append(deviceName);
sb.append("'), 1)");
return sb.toString();
This also works on CCM6, and most likely on CCM7 (I haven't had any projects with 7 yet but at first glance I haven't spotted any major changes like in between CCM5 and CCM6 (the extension mobility stuff has completely changed between those releases).
And if you do it manually.. just go to your application user, and have have the device association right there.. press the select more phones button, search for all phones whose name starts with sep, check them all, and submit.

Broadcast Message to All Phones

Hi
I am wanting to develop a solution to send a message to all IP phones or a selection of IP Phones.
I do not want to use a 3rd party product - I want to write the code myself in c#
I have downloaded the SDK and have the Push2Phone ASP scripts working.
I can send text from a C# web application to a particular IP Address by using the Execute Method.
Is using the Push2Phone example the only method to send to multiple phones?
Create a queue and send to each IP address one after the other an execute command?
Is there a broadcast method to send to all phones? How do you configure this?
The PushToPhone uses the execute method. Is this the correct method one would use to send to 200 phones?
Where is the best documentation for doing what I want. I have done a lot of searching but since I am new to this technology I keep finding information that is not quite relevant to my task. ( a url please ).
I hope someone can answer one or more of my questions.
Cheers
Chris

>Create a queue and send to each IP address one after >the other an execute command?
Yes, that's the way to go. Well, I'd use either a threadpool and send a bunch of requests simultaneously (with authentication, it can take a while before you get a response).
Also keep in mind to use your own authentication page to reduce the load on your CCM and speed up the process.
There is no broadcast message so you have to get all devices via DeviceListX.asp (CCM 3/4.x) or AXL Serviceability (CCM 5.x)

Camera is black-- unable to take any pictures. All phone content has been restored and still hasn't fixed the issue. HELP

Camera is black-- unable to take any pictures. All phone content has been restored and still hasn't fixed the issue. HELP

Hey DannyHTDB,
Thanks for the question. If you follow steps 1, 4, then 5 in the iPod troubleshooting assistant, that will most likely resolve the issue:
iPod Troubleshooting Assisstant
http://www.apple.com/support/ipodtouch/assistant/ipodtouch/
All the best,
David

Where is the A2DP why it isn't in iPhone all phones have the A2DP

Where is the A2DP where I want to know why it isn't in iPhone all phones have it the iPhone must have it also it's the best mobile in the world it must have the A2DP I repeat

ALL phones as in 100% of ALL phones do not include this.
A2DP will be included with firmware update 3.0 to be released this summer, but will apply to the iPhone 3G only. This will not be supported with the first generation iPhone.

How do I restore all phone numbers deleted more than 1 week ago?

How do I restore all phone numbers after they were deleted more than a week ago?

erin --
If you've emptied your Mail trash, you can't.

My IPhone4s (cell phone) and my SIM card have destroyed.now I have lost all phone book number. I have just an mini-ipad2 ,it contain just contacts name which I had their email address in my yahoo Bookmark. how can I restore and reassume my phone numbers?

The best regards
DearSir/Madam
My IPhone4s (cell phone) and my SIM card have destroyed.now I have lost all phone book number. I have just an mini-ipad2 ,it contain notes and just contacts name which I had their email address in my yahoo Bookmark. how can I restore and reassume my phone numbers?
Please help me because I need to much to my phone Directory.
Thank you so much
Mehran

mehranheidari wrote:
Yes I have failed,unfortunately .
Then from where did you think you could recover your data?

If I lost my IPHONE5, i didnt set up "find my iphone", how can i locate it? if cant, how can i delete all phone data by itunes on my computer?

i didnt set up "find my iphone", how can i locate it? if cant, how can i delete all phone data by itunes on my computer?

ThisGal_Drea wrote:
i have my iphone set up with itunes on one computer, but i recently bought my own computer. How do I set up my iphone with the new itunes account?
Do you mean iTunes library?
iTunes account is what you use to make iTunes purcahses.
iTunes library is what is on your computer.
It says my phone can only be set up woth one itunes account. How do I remove the previous account?
No, it tells you it can only be sync'd with one iTunes library.
Simplest way is to copy the entire /Music/iTunes/ folder (thisis the iTunes library) from old computer to new computer.

Sudden static on all audio out

I am running Logic Pro 7.1.1 on a G5 Dual 2.3 GHZ with 2.5 GB of memory.
I have eliminated all extra hardware and am now just using the built-in audio.
In the last week, before the 7.1.1 update, all audio in Logic has static on it. If I bounce any file and play it in iTunes, it is fine. I can record it perfect in Garageband and import to Logic and the static will appear. It is definilty isolated to Logic. The static is not solid but acts like the music is too loud and is clipping to the beat. Any ideas?

Matthew Baxter1, "Sudden static on all audio out" #3, 01:19pm Oct 16, 2005 CDT
Have you tried trashing Logic prefs ? ( p106 in 'Getting Started' )
(re-instaling the app is not often necessary, but even if you do, it won't overwrite corrupt prefs)

Static on all phones

Similar Messages

Maybe you are looking for