Static over iPhone speaker, then the speaker doesn't work at all

I received a replacement iPhone (3gs) on Monday and once I got in the car, a static interference sound came out of my phone's speaker. The speaker then didn't work for about 8 hours and spontaneously came back on. Now, it has happened again. I got into my car, a little static sound came out and now no sounds come out of my speaker - no ringing, alerts, clicks, voicemail, nothing.
Any suggestions? I went back to the Apple store (Genius bar) and the speaker was working so they couldn't do anything. They said they have not heard of any interference problems.
I have reset, restored, updated iPhone & iTunes software.

There is no magic trick to make a damaged screen work.

Similar Messages

In my wife's window, the sound works, when I switch over to my window the sound doesn't work. I noticed the problem when I went to a YouTube video. How do I correct this?

In my wife's window, the sound works, when I switch over to my window the sound doesn't work. I noticed the problem when I went to a YouTube video. How do I correct this?

Hello Kiira Doon,
The troubleshooting steps detailed below may help get your iPhone's display to function.
Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
Try turning iPhone off and then on again.
While connected to the iPhone charger, try to reset the iPhone.
If the low-battery screen appears, charge the iPhone.
My issue is still not resolved. What do I do next?Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen

My iMessages freezes when it gets through about 90% of the loading bar. Then the message doesn't send at all. My iPod's only about 2 week old, what's wrong and how can I fix it?

My iMessages freezes when it gets through about 90% of the loading bar. Then the message doesn't send at all. My iPod's only about 2 week old, what's wrong and how can I fix it?

Maybe:
iOS: Troubleshooting Messages

I made a mistake of trying to put 5.0.1 beta 1 firmware on my ipod touch 3rd gen. Now the ipod doesn't work at all. Any suggestions?

I made a mistake of trying to put 5.0.1 beta 1 firmware on my ipod touch 3rd gen ( non-registered) unsuccessfully. Now the ipod doesn't work at all with any public firmware. Any suggestions?

You can try putting the iPod into Recovery Mode and restoring it:
http://support.apple.com/kb/ht1808
If that doesn't work, you'll need to take this up in the forums to which you have access as a member of Apple's iOS developer program.
Regards.

The accelerometer doesn't work at all please need help

Well the problem is that the accelerometer doesn't work at all in my ipod touch 3G it's with the ios4.2.1 and it used to work normally but now just doesn't react to te moves please need help

Thanks for the Welcome. After using macs for such a long time. This is my absolute 1st problem.
Here's whats in the log:
5/15/08 10:52:19 PM Mail[133] Unknown class ASExtendedOutlineView in Interface Builder file.
5/15/08 10:52:19 PM Mail[133] Unknown class EditingTableColumn in Interface Builder file.
5/15/08 10:52:20 PM Mail[133] * -[NSTextFieldCell minimumWidth]: unrecognized selector sent to instance 0x8db670
5/15/08 10:52:20 PM Mail[133] * -[NSTextFieldCell minimumWidth]: unrecognized selector sent to instance 0x8db670
Stack Trace: (
2512178932,
2475804524,
2512208056,
2512201400,
2512202056,
53820,
53492,
51728,
49036,
2512235268,
2517195632,
2517160308,
2517158680,
35100,
34644,
32612,
29152,
18456,
2501752236,
2511731368,
2443453352,
2443452876,
2443452428,
2517377984,
2517376392,
2517350980,
2517156936,
993392
When I go to Window->Message Viewer from the menu bar....This is what i get and I can't even close it. I have to force quit mail app completely. I just installed AmunRaa2.0 (it's a theme to change the look for low light consumption. I didn't realize but I installed a a file called MailFix which is supposed to be the fix not the actual installer. I am including the file as well.
/Users/paulkola/Desktop/screen-capture.png
/Users/paulkola/Downloads/untitled folder/Installers/Mail Fix.zip

Is there a way to turn off an iPhone 5 if the button doesn't work?

My iPhone 5 on / off button at the top doesn't work. There are ways to get around locking and unlocking the phone but is there an alternative to power off the phone?
Thank you.

http://www.youtube.com/watch?v=YTh4EGuDmO4

My 3g internet doesn't work anywhere. I can get internet with wifi, but when I turn that off, the internet doesn't work at all. Any ideas?

I've already tried resetting the phone. Nothing seems to work. Occasionally the internet works fine, but most times, it doesn't work at all.

Contact your carrier to ensure data access with your carrier's cellular network is provisioned properly with your line/number/account.

Macbook pro fan making loud noises and going really fast. Now the fan doesn't work at all and my computer gets extremely hot almost instantly. Is there a way to fix it without having to pay a ton of money to have someone fix it for me?

I've had my Macbook pro for about 3 1/2 years now. It has worked great until recently. A few months ago I noticed that the fan would always run really fast when I was doing simple tasks. After a few weeks/months, the fan was still really fast but it also started to make these loud noises. Now, it only occasionally makes the loud noise if I move my computer after its been stationary for a while. The fan no longer works at all and my computer gets exceptionally hot almost instantly when I turn it on. Is there a way to fix this problem without having to pay a ton of money to have someone fix it for me?

You can try a SMC reset:
http://support.apple.com/kb/HT3964
you can also check this:
http://www.ifixit.com/Answers/Active?search=replace+fans&csrf=sqmfo0yj19

The on page search is ONLY working from top down. Search the previous doesn't work at all. I've been using firefox v.3 till now and it ain't work at all. Can you fix it???

Just do a on page search (bring up the search bar). type a word and start searching. The search will not work until you specifically click on the page and put the cursor in the page. Why do i have to do that since i'm already viewing the page and i intend to do search??
Once you are searching the word, click on the 'Previous' button to go to previous found word. This button NEVER work since i started using firefox v.3 till now!!! Hello, pls improve your search. Go take a look at IE same page search.

From the Firefox help files;<BR><BR>
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.

Sync contacts to the iPhone 4 with the computer doesn't work

I used to do contact sync before but after I upgraded the IOS to 4.3 and the iTunes to 10.5, my contacts in the iPhone 4 & laptop are not in sync.
Any ideas?

Hello there WayneHope,
It sounds like your camera is not launching at all. I want to recommend the troubleshooting outlined in this article named:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Camera isn't functioning
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center. Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. After recording begins, you cannot readjust focus until you stop recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll. Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
Thank you for using Apple Support Communities.
Regards,
Sterling

I cannot uninstalled my vyber in my iphone 3gs, and the wyreless doesn't work .?

My iphone 3gs is blocked because i cannot unistall the software VIBER ??

hi guicheft have you tried to do a hrad reset on your fone ? & have you deleted from your itunes at all ? if that still does'nt work you could try taking the sim out then put it back & see if that works. gud luck .lori

I can't believe the greatest phone in the world doesn't work with all wireless networks? Is this a sick joke????

I must have the iphone..... Will anything work with t-mobile???

If you must have the iPhone in the USA, your choices are AT&T or Verizon. T-Mobile has a great selection of phones, but not the iPhone.
Last March, an agreement was announced under which AT&T will acquire T-Mobile USA. That won't happen for at least 12 months. Here is a FAQ about that: http://newsroom.t-mobile.com/articles/more-information-att-acquires-tmobile

I have problem with My dual LED flash On My iPhone 5s. The Amber LED doesnt work at All. I dont know Since when It happened,.. Does anyone Know how to solve This?

When i bought This iPhone 5s one Month ago, all The functionalities of This iPhone 5s worked normally. And somehow, i have just noticed that My amber_led doesnt work when i use My Camera. I am sure that i have The flash turned On at The screen. And Also The white LED working properly. So., does anyone Know how to Solve The issue? Thank you

I believe there are 1500 different mixes of brightness for the two LEDs to produce an accurate color tone on the "flashed" subject. So possibly there are situations where the bottom LED would appear brighter than the top one, especially in very cool lighting conditions...
also there are software algorithms to control how bright each is..reesetting the phones settings should fix the problem if notthen, its a hardware related issue bring to apple its under warranty

HT4528 The vibrate doesn't work at all, hasn't since I got it, what do I do?

I bought my brand new iPhone 5 in July and since I've had it there has been no vibrate, I've tried to turn it off and back on and don't know what the problem is. Any suggestions?

Well I actually just figured maybe I'd find an answer here first haha

I'm using ipod touch for a year now. I was using this morning and suddenly the ipod doesn't work at all maybe it got wet from my bag but there wasn't wet stuff in there. and itunes said iTunes has detected an iPod in recovery mode. please help me

I'm using iPod touch for a year now. It was doing fine this morning but in the afternoon suddenly when I took it out of my bag, the screen was just black and it wouldn't turn on and stuff. So I thought it didn't have battery so I charged it didn't work. I plugged to the computer and it said iTunes has detected an iPod in recovery mode. You must restore this iPod before in can be used with iTunes.
Maybe my bag was little wet today but i don't think that is why.. since it wasn't that bed.. just some paper was wet and stuff..
What should I do..? Please help me.

Connect to the Computer you Usually Sync with and Follow the Steps Here...
Recovery Mode
http://support.apple.com/kb/HT1808

Static over iPhone speaker, then the speaker doesn't work at all

Similar Messages

Maybe you are looking for