Static recording macbook issue

Can anybody help?
I have constant static when recording on logic pro. Here's what i've done so far. Apple also want to charge me 85 pounds to have a look and they cant even guarantee results!
I thought it was my external soundcard (alesis multimix) so i changed this for a motu audio express - it is still happening (even more frustrating that i changed hardware for nothing)
I've swapped all wires and changed USB ports.
Even with no instrument in and if you merely hit record a static will come through. The static is extremely loud and you cant even hear anything being recorded.
I've updated all drivers. There are some notes that it could be a grounding issue?
Does anybody have any advice? It has worked previously in the past, albeit some months ago. And I have not moved any of the hardware around.
Thanks in advance
Dec

1- no the  VM can have any IP addressing, there are completely independent.
If that were true, and I'm not arguing it's false, then what I'm trying to do should work perfectly.
2- when the VM is on dhcp, try to put the same configuration to static and give us the results
I don't know if I understand your request perfectly, but I'll try to answer it.
When the VM is using DHCP, it functions perfectly.
If I simply take the settings provided by DHCP and use them statically, it functions perfectly.
When I take an address/subnet/gateway combination supplied by my ISP, it fails.  I can't ping the gateway, let alone ping the DNS or resolve names or ping anything else.
Note:  I know the address/subnet/gateway combination is good since if I use it on the independent adapter, it works like a charm.
I assumed what you said in #1 above to be true.  However, if it is, and since I know the VM's networking is working (since both DHCP and static work), I'm even more confused why it doesn't work with the actual static IP information that I need to use.
Brad.

Similar Messages

  • How to create Static Record group in Oracle Forms??

    Dear All,
    I have the following values V1,V2 to be placed in my list item field during DML operations.
    I have an example to create the record group based on the table; whereas i have never tried for static value creation.
    Could you please guide me how can i acheive this.?
    Thanks ....
    Regards,
    Sunil.G

    Thanks dhivya for your reply.
    Actually what happens is; when i use the same methodology as you mentioned, it is asking me to set the Initial value.
    Whereas in my applications; user has to manually select any of the values i.e eithe V1 or V2 for the first time.
    Moreover i have found the query:-
    I have created a static record group RG_VERSIONS i.e creating a new record group with the static values mentioning the "Column names " as "Version_label" which i have given the column values as "V1" and "V2" and then another column name as "Version_value" with the column values as "V1" and "V2".
    Then i used the below query in the WHEN-NEW-FORM-INSTANCE trigger:-
    PROCEDURE p_when_new_form_instance
    IS
    l_rg_id recordgroup;
    l_item_id item;
    BEGIN
    --Populating value for  Version Type based on static record group
    l_rg_id := FIND_GROUP ('RG_VERSION');
    IF NOT ID_NULL (l_rg_id)
    THEN
    l_item_id := FIND_ITEM ('BLOCKNAME.COLUMN_NAME');
    POPULATE_LIST (l_item_id, l_rg_id);
    END IF;
    END p_when_new_form_instance;
    Then it was working fine.
    Thanks for your time.
    Regards,
    Sunil.G
    Edited by: Sunil G on Jun 27, 2010 6:00 AM

  • Static record group and lov problem

    hi all,
    1)I created a form module
    2)created a basic datablock based on empno and ename from emp table.
    3) created a static record group ,where i specified the column name as col1,provided the values as 1 ,2,3,4,5 etc
    4) created an LOV and assigned the above record group to the LOV
    5) then assigned the lov to the emp.empno item in the datablock emp....
    when i run the form .....i get the list of values message on the console (bottom end of the window) ....
    but I am not able to see the LOV when i press the cntrl L or see it from the edit menu command ?
    what must be the problem ?
    ta
    s

    Dear,
    May be you don't set LOV's "Column Mapping Properties". After setting the properties correctly you will be able to display LOV.
    Thanks.

  • Form Builder Static Record Group

    Hi Folks,
    I am a part of a development team where we do parallel development where a team in India is working on certain forms and we work on other forms.
    We faced a peculiar problem, both the teams use Oracle Forms 6i, but we lose values in the static record group attached to Static LOV.
    Have any one of you faced this problem before, please let me know.
    With Regards,
    Srikanth

    Hi all
    Should I install patches for correcting this problem ?
    Thanks and Regards,
    Srikanth

  • Which two statements define a Static Record Group?

    Hi all
    I read this question and I do not know the answer
    the question is
    Which two statements define a Static Record Group? (Choose two)
    A. The Record Group can be created only at run time.
    B. The Record Group is not associated with a query.
    C. The Record Group can be created and modified only at design time.
    D. The Record Group can be created and modified at design time or at run time.
    E. You can modify the structure of this Record Group by adding columns and rows at run time.
    F. You can modify the structure of this Record Group by associating it with a query at run time.

    Types of record group, either Static or Query:
    Static     Specifies that the record group is constructed of explicitly defined column names and column values.
    The values of a static record group are specified at design time and cannot be changed at runtime.
    Query     Specifies that the record group is associated with a SELECT statement, and thus can be populated dynamically at runtime.
    When you select this option, enter the SELECT statement in the multi-line field provided, then choose Apply.
    So answers B and C
    From Forms Help

  • Soundblaster 4 & recording latency Issues

    Hi. I'm new to this board and to Soundblaster. I'm hoping that its ASIO capabilities can resolve recording latency issues I'm having. I'm a voice over actress and singer and need to hear myself over the headphones while I'm recording in real-time. I have a split-second delay in the headphones, making it impossible monitor live. I have a brand new PC and just installed the SoundBlaster Audigy 4 card yesterday. I have several recording/editing programs (Acid Pro 3, Audacity, Cakewalk Express) and can't get it to work correctly.
    I downloaded a program from asio4all, but it doesn't seem to make any difference. Can someone wiser than myself help me resolve this issue?
    Thanks!
    Joni
    email: [email protected]
    www.jonilambert.com

    Does any of your software support ASIO (eg. ACID 3 PRO since Audacity and Cakewalk Express don't support)?
    If not, since you propably are familiar w/ ACID, you can download a freeware version of Sony ACID 5 Express to get ASIO supported. It's a bit limited from PRO but least it's newer than v3 that you listed.
    There are other similiar software available as freeware (some don't have MIDI features):
    Kreatives Kristal - http://www.kreatives.org/kristal/
    Mutools Luna FREE - http://www.mutools.com/products.html
    Cockos Reaper (free up to version 0.999) - http://www.cockos.com/reaper/index.php
    etc.
    jutapa

  • What happens when we delete trillion records and issue a commit.

    Q1. what happens when we delete trillion records and issue a commit and also is there any way to calculate that how much time this commit will take to complete the process?
    Q2. how do interpret the oracle execution plan?
         cost, cardinality, rows, etc...

    dba wrote:
    Q1. what happens when we delete trillion records and issue a commit and also is there any way to calculate that how much time this commit will take to complete the process?Since you're modifying the blocks, Undo will be generated for the modified data and change vector will be recorded in the redo log buffer.(and surely your records will be deleted ;) )
    The timing of a Commit doesn't depend on the size of transaction.
    dba wrote:
    Q2. how do interpret the oracle execution plan?
         cost, cardinality, rows, etc...Oracle documentation should help you, just google for that. You should also visit 'asktom.oracle.com' for the topic. I'm going through a book 'Troubleshooting Oracle Performance' written by Christian Antognini and I feel it contains very good explanation on such topics.
    Regards,
    S.K.

  • Static recording

    When i record myself playing guitar into the built in speakers I end up with a lot of static in the background I don't know how to make it go away...

    >When i record myself playing guitar into the built in speakers ...
    I guess you're talking about the internal microphone?
    Do you have monitoring turned on? Are you using headphones? Is your computer a laptop?
    In MacBooks, the internal mic is necessarily picking up a lot of internal noises, especially the computer's fan. To receive better results, you should use an external mic.

  • Audio recording: MacBook VS MacBook Pro

    So here I am.
    Been reading a lot about the introduction of MacBook Pro/MacBook and I'm now really confused about which I should choose. I'm seeking for a notebook for live audio recording and the price gap between the MacBook and the MacBook Pro mystifies the hole thing.
    MacBook is really tempting me since it's not that far by terms of caracteristics from the Pro. I don't really need a unique GPU since I don't really like playing games on computers. But I do use Photoshop and some graphic intensive applications and I would need room for eventual Photo/Video editing. Then, I was thinking of getting a MacBook 2 gHz (white) with 2 GB of RAM to allow some to the integrated chipset. Question 1 answered.
    I've read a lot about the GLOSSY screen and I must say, I prefer the MATTE screen since it doesn't over-saturate and it isn't reflective. Though, I'm giving myself some time to hear feedback from people doing Photoshop work and having compared the results from what's on screen and what's actually printed (with a good quality printer). I'd also like to have feedback from people having worked with the MacBook outside or by a window with sunshine.
    The whole issue is that the 2 gHz , 15 inch screen, 1 GB of RAM (1 dimm) MacBook Pro pro has a 227$ price difference with the MacBook 2 gHz (white) with 2 GB of RAM (CANADIAN PRICES). My budget is tight, so I want to be sure if paying that difference is worth it or I could be fully satisfied with a MacBook.
    Thanks for the attention!

    As long as graphic performance is not an issue (which shouldn't be for audio recording), you will be absolutely fine with the MacBook. There is no difference in spec between the 2GHz MB and the 2GHz MB Pro except for the graphics card (and hard drive speed). I use Logic Pro and Pro Tools LE extensively and have a MacBook on order. The only thing you may need is an external hard drive if you plan on running lots of tracks. You should be very happy with the MacBook unless you absolutely need the extra screen real estate or prefer the matte finish. I should be getting mine today and will report back on how I like the screen. Hope that helps!

  • Noise when recording - Macbook - sound card problem?

    Hi, I'm recording with Garageband on my Macbook, and everything sounds fine through the monitors, but once I start recording, it picks up this cyclical, scattered hiss (very hard to describe, kind of like a hiss rolling it's R's). It's not any of my plugged-in equipment, because it records this noise even when it is recording "nothing", with no mics or anything plugged in. It's very apparent on quiet tracks, not so much on busier compositions, but it makes doing any real instrument recording untenable. Is this a fault in the sound card? Is the program recording a vibration from the processor? The hard drive? I am flummoxed. Would a USB or Firewire audio device suffer from the same issue? Help!

    I used to have this problem too. Try this: Just record like 10 seconds of seomthing, anything... even silence, with the macbook plugged to it's power source(ac-adapter) then do the same thing... but unplug it from its power source so that is is running solely on battery power. My prediction is that you will hear a significant difference. Turns out, the buzz of the computer charging, while very very very very slight, will be picked up. (if you dont notice this diference, then I am full of crap and cant help you)
    So here's what you do: Get an interface that plugs into usb or firwire. I use the iMic. Very simple and works great.

  • 2006 White Macbook Issues?

    I have a late 2006 white macbook with a 2.0 ghz core 2 duo (Lion), and I also have a mid 2006 white macbook with a 1.83ghz core duo processor (Snow Leopard). I recently bought a 3rd party battery for the late 06 version. The battery had good reviews but once I installed it into the macbook the battery indicator icon said "service battery" and battery life went rapidly downwards. Out of curiosity I put the defective battery in the 1.83ghz macbook and everything appeared fine. I got 4.5-5 hrs of battery life with no "service battery" message. What could be causing that?
    Also The 2.0ghz one has been having heat issues since I bought it (~1.5 months ago). Not overheating issues, just very loud fans and a very warm case. I don't do very intensive things on either laptop either. Just a single tab of web browsing. The 1.83ghz Macbook runs whisper quiet and is considerably cooler on the outer case. I cleaned both of dust recently and I re-applied thermal paste on both also. Could the 2 issues be correlated somehow? How can i fix them?
    Thanks,
    camtechguy98

    Well first try what Mike suggests:
    "Try resetting the SMC Intel-based Macs: Resetting the System Management Controller (SMC)"
    If that doesn't work refer to my post about cleaning the fans above your post. Any decent service tech will be able to do that.
    Apple store for sure.
    This article addresses most of the issues I've seen:
    http://apple.stackexchange.com/questions/120177/macbook-fans-are-running-high-ev en-under-normal-load
    "get the fan serviced before I decide to ditch it."
    Oh no! Please don't ditch it. I repair Macs and donate them. If it comes to that email me first.

  • APEX 3.1.2 Static File Upload Issues

    We are still running on APEX 3.1.2 though we hope to go to 4 very soon.
    We had a production problem this past week that is perplexing. I have seen other posts referencing similar issues but no solutions.
    We have an application that has several Static File Javascripts (.js). We already ran into the IE Upload bug so we only upload in Mozilla now.
    We had changes to one of the .js files (identity.js). I deleted the old file using the Shared Components screen and uploaded the new one. The action was "Successful" but the file was still the old version. We deleted a file of 73 lines of code and uploaded a new version of 28 lines. After successful upload, we still would get the 73 line version . The app was still getting that version too.
    I deleted it many times and tried again. I ran scripts to do both the delete and upload. I even deleted the file manually from the FLOWS_FILES table that held it. Still got the old version.
    We bounced the server (thinking it was cached somewhere) - still got the old version. Finally, in desperation, I started cloning the app to another app number in another Workspace. Since we use aliases, I thought I could use a clean Workspace and uplad the new file there. This worked but - suddenly the old Workspace started using the correct file.
    Is ther some secret cache somewhere that needs to be cleared out? I did not want to start randomly clearing out caches and there is no documentation on this issue.
    Is it something about our config - we have Oracle HTTP Server, OC4J, and modplsql for this environment with a 10g database.
    Any insight would be appreciated - my manager does not like "it fixed itself magically".

    We ruled out the browser caching by trying the app on several other people's PCs.
    I am thinking it is being cached somewhere in the APEX server environment but cannot find any documentation on where or what that might be.
    I think I might have triggered a refresh when I was trying to implement a cloned version (in a different Workspace). It seems that the scope of a JS file is within its Workspace so we figured that a new Workspace would treat the changed file as a new file - and it did. During this process, we had duplicate ALIAS for a minute and I think that confused the APEX App Engine and triggered the refresh.
    But that is a SWAG opinion.
    I also thought of "versioning" the JS files but our developers are not too keen. If we don't find another solution, that may be what we have to do.

  • Record Count Issue in Search page ?

    Hi Friends
    I am trying to display record count on Search page and I have the following code in
    The table has total of 62 Rows
    AM : for testing purpose, i am printing in log
    public void getISAGRecordCount()
    OAViewObject vo = (OAViewObject)getXXG2_ELIM_ISAGSView1(); //getXXG2ISAGSearchVO1();
    int fetchedRowCount = 0;
    vo.setMaxFetchSize(-1);
    vo.executeQuery();
    fetchedRowCount = vo.getRowCount();
    System.out.println("RowCount: "+ fetchedRowCount);
    IN PFR of CO: I am calling by this way
    am.invokeMethod("getISAGRecordCount");
    the Issue is
    for the first time, when i search  Based on search criteria, I know it should dispaly 10 records  but in the Log file i see the total Record Count of the Table     Ex; 62
    When i do the serach for the second time, based on search criteria, I know it should display 20 records, but the log file has 10 records ( previous search results)
    If I do the search for 3rd time, I see 2nd search results in log
    Any help in this issue, how to fix this?
    Thanks
    Ravi

    Hi,
    Please donot use getRowCount(), use getFetchedRowCount() and remove setMaxFetchSize(-1).
    Hope it will resolve your issue.
    Just for understanding of the concept:
    getFetchedRowCount() returns the number of rows cached in the view object -- including programmatically inserted rows.
    The getRowCount() implicitly execute a query against the database (if a query has not been executed yet)
    Regards,
    Reetesh Sharma

  • Stream.record() keyframe issues

    I have an application that uses server side recording using the Stream.record() method. The source for the Stream class is a live stream that several clients can publish to or view. Only one client can talk at a time but they can stop and start publishing when they like. Stream.record() allows me to handle recording from these different sources into a single server file. The code looks no different that that seen elsewhere on this forum or indeed in the Adobe documentation (FMIS3.0.4) and is something like this;
    To start the recording;
    application.recording =  Stream.get("recorded_stream");
    if (application.recording) {
       application.recording.play("live_stream");
       application.record("append");
    and to stop the recording;
    if (application.recording) {
       application.recording.play(false);
       application.recording.record(false);
    And on the client a NetStream.publish("live_stream","live") or NetStream.play("live_stream") are issued depending on whether the client is talking to a group of clients or listening to one of the other clients.
    Now this code works provided, it seems, the first recorded section is greater than some interval around 30 seconds otherwise the keyframe metadata (as reported by YAMDI) has large gaps at irregular intervals that cause stalls during playback. You can see in the metadata output from YAMDI that the filepositions are consistent (all the data is there) but as there are large gaps (like up to 20 seconds) in the keyframe entries anything that plays it stalls, also the duration in the metadata includes the gaps.
    I have tried using FLVCHECK and it says the files are fine. I have tried making each recorded segment into its own file (with the intention of joining them with FFMPEG post process) but it makes no difference, the playback stall manifests itself as a gap at the start of one of the movies and FFMPEG uses the metadata it finds so it can't help.
    The second related issue is that the keyframeinterval and framerate of the recorded file don't relate to those requested by the client at all. In this case I am asking for 15fps with a keyframe every second and I am getting 7-11fps that and 4-5 keyframes per second. Also neither of these figures match the system wide defaults in the Application.xml file. In this particular application the system will be used to record British Sign Language exchanges and I need to keep the framerate and image quality high an although I can understand why the server would want to fix its framerate/interval (as its recording from different client sources) I can't find anywhere in the docs where these values can be set abd the dont relate to the settings in the Application.xml file for this app either. BTW the server running FMS3.0.4 is a quad-core XEON with 16GB through a 100Mbit switch that does nothing else so its not a resource issue !!
    Anyone done anything similar or had a simlar problem? I guess the weird part in my app is that usually Stream.record() seems to be used for injecting live custom metadata or for recording live broadcasts from FME both of which probably aren't going to switch stream sources so quickly so maybe this is a bug?
    thanks for reading this,
    Andy Freeman
    Correspondent Corp

    Hi, there may be a component test for the keyboard in the F2 UEFI Diagnostics that you could try, I pasted the instructions from the manual below: To start HP PC Hardware Diagnostics UEFI: Turn on or restart the computer, quickly press esc, and then press F2 

  • Nokia Lumia 1520 Video recording/playback issues.

    I seem to have issues with video recording. Video seems to have some pause "still" effects when taking video and playback in phone shows those stops very clearly as it freezes for while and jumps many seconds forward.
    When I play same file in PC with video player the video plays better but still I can manage to see some small Glitch in video like my phone did stop recoding for some frames.  I have been using SD card and phone memory and both have same problem.

    No solution so far and it is my wife phone so haven't have much reason to play with it find solution. She only takes photos anyway.
    This current phone has already broke down 2 sim cards also or wireless charging did brake those not sure after stop using wireless charging 3rd sim card have been fine.
    someday when have I feeling to take this phone to warranty service I will try wireless charging again.

Maybe you are looking for