Static Text Not Displaying in Vista on modem connection

I'm very new to Flash. I set up a swf movie on the index page
of
http://www.chicagowoodturners.com
which has apparently been working fine. I've seen it on a number of
different computers and OSs. Yesterday I saw it on a freshly
installed Vista machine, and all the static text was invisible.
Dynamic text appeared fine. Colors are websafe #663300 and #cc00ff.
It was connected by modem, which is the other difference from the
working versions I've seen. The font is Eras Bold ITC. Any guidance
is welcome!
--Chuck

Similar Messages

Flash Text not displaying certain fonts

Thanks as always…
I am trying to use Flash text for some headings, but after an
hour of pulling my hair out I've just realised it will only display
certain fonts, such as Helvetica etc.
I added the font I want to use to my font list but it still
does not display…
I'm using MX on OSX 10.3.9.
Any ideas? Thansk.
Flash Text not displaying certain fonts

Fodderstompf wrote:
> Thanks guys,
>
> I don't have Flash MX and it turns out the font is a
Postscript Type 1.
>
> Didn't realise about the true-type thing, bit of
nusiance (and completely the
> opposite of the hassle I normally have with print
work!).
>
> I'm gonna look and see I can get a true-type version of
the font (Tabitha), or
> is there any other work around?
>
> Thanks.
>
>
Is your text in a dynamic text box, or static text box in
flash?
I don't think the issue concerns the "true-type" or not
"true-type" font.
In Flash, when text is part of a dynamic text box (which I
assume is the case in your situation),
then the font works just like in an html page:
if the font is installed on the computer it will show, if
not, it won't. The way around this, is to
embed the font data in the authoring flash file, and link it
to the dynamic text box, via actionScript.
So if you cannot work on the authoring Flash file with Flash
MX or Flash8, and if indeed we're
talking about a dynamic text box, your only option is to use
a web-safe font.
seb ( [email protected])
http://webtrans1.com | high-end web
design
An Ingenious WebSite Builder:
http://sitelander.com

Why won't voice generated text not display as I speak?

Why won't voice generated text not display on the screen as I speak?

All you get in 10.6.5 is spoken COMMAND recognition.
Dictation requires 10.8 Mountain Lion or later:
Mac Basics: Dictation lets you speak text instead of typing

Dynamic text not displaying when publishing for flash 8

This dynamic text works fine when the movie is published for
flash 7, but when i export for the flash 8 player it seems to be
invisible. Is there any obvious reason for this happenning?
thanks
jon

Ok, thanks, looks like you've pointed me in the right
direction. I havent fixed it yet though. Heres where i am at:
eval(theTarget+".buttonPrime").tex.embedFonts = false;
now i can see my text. of course its using a default font.
var my_fmt:TextFormat = new TextFormat();
my_fmt.font = "arial14b";
eval(theTarget+".buttonPrime").tex.embedFonts = true;
eval(theTarget+".buttonPrime").tex.text = "wasssup?";
eval(theTarget+".buttonPrime").tex.setTextFormat = my_fmt;
this isnt working. I have added a font object to the library
and linked it for actionscript using the monkier "arial14b".
however my text is quite invisible. i have checcked, 'export in
first frame' for the font object i even tried it with this
deselected. i have deselected the embed font option on the text
feild itself. that doesnt work either (unless i dont try to set the
text format, so long as i accept a default font, its fine).
so err, help?
confused
jon
ps further to this is have discovered more about this strange
behaviour. i can set the text to a different string, provided i do
not try to embed the font in any way. if i set the font to embed, i
can have the text display with the correct font, until i change the
text. then it dissappears. also i cannot seem to affect properties
like font size by means of my TextFormat object. the textFormat
object also does not seem to affect the font of the text.
in short, when exporting for flash 8, i cannot seem to
successfully embed fonts for dynamic text. the only thigs i have
gotten to work are: static text (or a dynamic text feild with
unchanged text) with an embedded font, or dynamic text with a
default font.

PC static font not displaying correctly on Mac?

Hi,
I have a PC fiash file with static body text that is New Gothic font. The published swf looks great on the PC, though when testing on Mac, none of the text appears. I thought that with static text fields, the font is automatically embedded?
Can anyone offers any suggestions as to how I can get the font to display properly on a Mac?
Thanks,
Dan

Well there are probably people that know better than me. But I have a rule of not using any fonts that aren't standard fonts everywhere. (Arial, Courier New, and Times New Roman) If you don't already know, fonts are loaded on the local computer, (the user's computer) if they don't have the specific font you selected from all the fonts loaded on your computer, they won't see the work you did in the format you did it in, if at all.
So make your titles sexy and cool and break those apart so they look exactly how you want them, but unfortunately if your project is intended for the world wide web, you have to abide by web standards to ensure the majority of users can view it and this especially applies to text.
Hope this answers your question. I don't know if I'm telling you stuff you already know here, but like I said, others may know better.

Please help--some text not displayed.

I used to be able to use Reader with no issues but suddenly only the basic text is viewable--Title blocks, big fonts, etc are hidden in solid black rectangles--other computers display these pages fine. Not sure if this began before or after I updated to version 9--but I cant download version 8 to see if this is the problem. Support refered me here for answers but II posted a few days ago but my questions was ignored. Please advise. Thx.

Hello Suruchi,
Please follow the steps below.
1) First wrap the 3rd element(some static text) in an individual sub form.
2) Then wrap all these 3 main elements in a parent sub form of type flowed.
3) Now on sub form of 2nd element, write the Javascript in Initialize event as below.
if ( this.parent.text.rawvalue == " " )
this.presence = "hidden";
4) Finally on sub form of 3rd element, write the Javascript in Initialize event as below
if ( this.parent.text.rawvalue == " " )
this.presence = "hidden";
Note: Here text.rawvalue in Javascript is the value of 1st element which is a text field.

Text not displaying

I have been slowly converting an AS3 Flash IDE-based interface to Flash Builder, keeping up with the daily builds (for the most part) and reporting bugs as I go.
For a long while, things were going great, aside from the several bugs that I reported. At some point along the way, though, the text in my entire project started not displaying properly. Certain characters do not display at all.
It is a Windows standard font, though newer (Calibri), and the entire font set is currently embedded in the project.
For some reason, most capital letters do not display, nor do certain special characters (underscore, etc) Some lowercase letters don't display.
It is always the same letters that don't display.
I thought this was an issue with the build, but I rolled the SDK back the whole way to 4.0 (the original beta build) and it is happening there as well. There is no rhyme or reason to it, as far as I can tell.
Here is a screenshot with the problem:
The tabs should read:
Menu
Important Points
Glossary
The menu list should read:
Pre-Test Pt 1
4800_020
Fred Bauer Audio
Learning Activity
Learning Activity
Fred Bauer Audio
4800_020
Learning Activity
Learning Activity
And the horizontal list at the bottom should read:
Page 1
2
3
4
5
6
7
8
9
Has anyone else encountered this type of problem? Any workarounds?

Rich,
+1 to Alex's simple test case suggestion.
For example, does this work for you?
It renders correctly on for me using XP/FP 10.0.22.87 (debug) with SDK 4.0.0.8847:
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
        xmlns:s="library://ns.adobe.com/flex/spark"
        xmlns:mx="library://ns.adobe.com/flex/halo">
<s:layout>
        <s:HorizontalLayout gap="20" paddingLeft="20" paddingTop="20" />
    </s:layout>
    <fx:Script>
        <![CDATA[
            [Embed(source='C:/WINDOWS/FONTS/CALIBRI.TTF',
                   fontFamily='CalibriE',
                   mimeType="application/x-font",
                   embedAsCFF="true")]
            public static var CalibriEmbedded:Class;
        ]]>
    </fx:Script>
    <fx:Style>
        @namespace s "library://ns.adobe.com/flex/spark";
        @namespace mx "library://ns.adobe.com/flex/halo";
        s|SimpleText,
        s|RichText,
        s|RichEditableText {
            fontFamily: "CalibriE";
    </fx:Style>
    <s:VGroup>
        <s:SimpleText text="SimpleText test:" fontSize="16" />
        <s:SimpleText text="Menu" />
        <s:SimpleText text="Important Points" />
        <s:SimpleText text="Glossary" />
        <mx:HRule width="100%" />
        <s:SimpleText text="Pre-Test Pt 1" />
        <s:SimpleText text="4800_020" />
        <s:SimpleText text="Fred Bauer Audio" />
        <s:SimpleText text="Learning Activity" />
        <s:SimpleText text="Learning Activity" />
        <s:SimpleText text="Fred Bauer Audio" />
        <s:SimpleText text="4800_020" />
        <s:SimpleText text="Learning Activity" />
        <s:SimpleText text="Learning Activity" />
        <s:SimpleText text="Page 1" />
    </s:VGroup>
    <s:VGroup>
        <s:RichText text="RichText test:" fontSize="16" />
        <s:RichText text="Menu" />
        <s:RichText text="Important Points" />
        <s:RichText text="Glossary" />
        <mx:HRule width="100%" />
        <s:RichText text="Pre-Test Pt 1" />
        <s:RichText text="4800_020" />
        <s:RichText text="Fred Bauer Audio" />
        <s:RichText text="Learning Activity" />
        <s:RichText text="Learning Activity" />
        <s:RichText text="Fred Bauer Audio" />
        <s:RichText text="4800_020" />
        <s:RichText text="Learning Activity" />
        <s:RichText text="Learning Activity" />
        <s:RichText text="Page 1" />
    </s:VGroup>
    <s:VGroup>
        <s:RichEditableText text="RichEditableText test:" fontSize="16" />
        <s:RichEditableText text="Menu" />
        <s:RichEditableText text="Important Points" />
        <s:RichEditableText text="Glossary" />
        <mx:HRule width="100%" />
        <s:RichEditableText text="Pre-Test Pt 1" />
        <s:RichEditableText text="4800_020" />
        <s:RichEditableText text="Fred Bauer Audio" />
        <s:RichEditableText text="Learning Activity" />
        <s:RichEditableText text="Learning Activity" />
        <s:RichEditableText text="Fred Bauer Audio" />
        <s:RichEditableText text="4800_020" />
        <s:RichEditableText text="Learning Activity" />
        <s:RichEditableText text="Learning Activity" />
        <s:RichEditableText text="Page 1" />
    </s:VGroup>
    <s:SimpleText activate="event.currentTarget.text = mx_internal::VERSION;" />
</s:Application>
Peter

Text not displayed in the Web Report

Hi All,
I have a query where user is expecting both Key and Text to displayed in the report for the Info object "Local Product High". This infoobject has text data available. But Iam not sure why this is not getting displayed even when I select both Key and Text in the properties screen.Only Key is getting displayed.
Can some one throw some light on this.
Regards,
Srinivas

I juct checked the Text table and I see the texts for the infoobject exists. I do not think CHange run will resolve this issue. but yes the master data is active .
I will now try to run the report through Bex and come back.
Thanks for the input..
regards,
Srinivas

PO Material text not displayed in PO

Hi All,
Please help me in finding a solution for my issue,
We use SAP ERP 6.0, and recently upgraded from SRM 4.0 to SRM 7.0. whenever a PO is processed in SRM and replicated to SAP, "Item text" inputs entered in SRM is replicated to "Material PO Text" in SAP and when the PO is printed, those inputs are not displayed in the PO..
However if I amend the same PO again in SRM (by just modifying the inputs in "Item text") and re-replicate to SAP and reprint the PO, the inputs are displayed in PO this time. becoz of this, we had to amend every PO again to have the Item text displayed in PO.
Why the inputs are not displayed in PO at the first time and what made the system to display it after i amend the PO the second time???
Any help is much appreciated.
Thanks
Vinoth

Nabheet, Thanks for your response.
I have already raised this with the tech team and they said they antcipate this to be fixed by this March. I have no idea if this takes so long to fix it. Since we had to process 100s of POs every day, it is affecting our SLA badly
Vinoth

Arabic text not displaying correctly in Win Server 2008 R2

Hi,
We have an .mdb database stored on our Windows Server 2008 R2 server but when we view the contents some of the text has strange characters.
When we view the same db in Windows Server 2003 we do not have these characters. I'm not sure what exactly we need to do to correct this issue..
Any suggestions welcome..

Hi,
Thanks for your post.
When you open a Web page or a text file that contains a string of Arabic characters, the string is not displayed correctly. This issue occurs when the following conditions are true:
The Left-to-Right Override (LRO) Unicode control character is used in the string of Arabic characters.
You specify a font that is not Simplified Arabic Fixed.
Please apply the hotfix below:
Incorrectly displayed Arabic characters in Windows 7 or in Windows Server 2008 R2
https://support2.microsoft.com/kb/976525?wa=wsignin1.0
And check the result.
Regards.
Vivian Wang

Info Record Text and Material Text not displayed in Subcon. PO printout

Hi,
I have this scenario, where the Info record text from Info Record PO text does not appear in Print out but appears in Print preview.
Also the Info record text for standard Purchase order is displayed in Print preview and Print output.
The config settings for texts for Purchase order is the same for Purchase order with no Item Category (Standard) and Subcontracting (item category L).
Also the texts in Purchase order automatically copies in Standard purchase order (adopt button not present) but not in Subcontract purchase order (Adopt text is present).
I have checked the config for copying rule, for Info record text is automatically adopt.
I am unable to identify the missing config for this.
Also the same problem exists for Material text from Material Master PO text is not displayed in Fax output but appears in Print output.
Please let me have your inptus,
Regards, Muthuvel

The solution to this is SPRO->SAP Reference IMG->Materials Management->Purchasing->Messages
->Text for Messages->Define Text for Purchase Order.
Select Texts for Document Item folder - There will be a list by Document Type and Item Category. Make sure there are entries for your combination, otherwise they will not be part of the output message.

Text not displaying on components

I have one swf file where im using the default textInput and
button components. Just so the user can enter a zip code and click
submit. When i publish that swf, everything looks fine. The problem
is that i am loading that swf into a master swf and when i view it
through the master swf, it displays the components without text.
The submit button is blank, it should say 'submit' on it, and no
characters display when you type into the textInput component. I am
able to type characters and submit the form, but i can't see what
im typing. I've tried messing with embedding fonts in the child swf
as well as the master to no avail. If anyone has any suggestions,
they would be greatly appreciated.

Here's how to talk to your dynamic text box. Where you put
this bit depends
on how you are building the preloader, but since you say the
progress bar
works fine, I'll assume you know what you're doing there and
will be able to
get this in the right spot.
// variable that calculates a number for the percent loaded
preloaded = Math.floor((loadedBytes/totalBytes)*100);
// this line is talking to a dynamic text box named
"percentage_txt" that is
inside a movieClip named "preloader_mc" on the root timeline
// depending on your setup the path may be different, but
make sure
everything on the way to the text box is named
_root.preloader_mc.percentage_txt.text = preloaded + "%";
// You've probably left out the ".text = " bit. Just a guess,
but that's
the bit I always find
// I've left out when I'm having trouble with dynamic text.
// Also make sure your text color is not set to the same
color as your
background. Duh.
Good luck.
--KB
"patbegg" <[email protected]> wrote in
message
news:ejuu12$bmd$[email protected]..
> Hi,
> Cheeky little problem. I cannot get the dynamix text to
show on the
> preloader
> of a loaded movie. I am calling in a .swf which has a
preloader in it, the
> progress bar is fine but the text showing the percent
will not display.
>
> I have tried the _lockroot method, but no joy. Any ideas
anyone?
>
> Any help appreciated guys.
>
> Cheers,
> Pat
>

TextArea text not displayed correctly with ImageSnapshot

I am having an issue with the ImageSnapshot.captureImage command capturing the text in a TextArea. Attached are two files illustrating the issue. The "screenshot.jpg" pic shows how the TextArea controls are displayed on the screen. The "created jpg.jpg" pic shows how the text is displayed in the jpg that is created. Below is the code that creates the snapshot, everything is pretty standard there as far as I can tell. The text is obviously not sized the same from one to the other. Any ideas whats going on here or what I can do to correct it?
var myencoder:JPEGEncoder = new JPEGEncoder(50);
var imgss:ImageSnapshot = ImageSnapshot.captureImage(viewstack.selectedChild, 100, myencoder);
var fs:FileStream = new FileStream();
var ssfile:File = File.applicationStorageDirectory.resolvePath("ProjectImages/snapshot.jpg");
fs.open(ssfile, FileMode.WRITE);
fs.writeBytes(imgss.data, 0, imgss.data.length);
fs.close();
Thanks,
Scott

Scott,
Can you file a bug? http://bugs.adobe.com/flex
Thanks,
Jason

OTR text not displayed correctly

Hi,
I have view in which there are 3 tables with 3 colums each.
All the data binding etc is fine and it is displayed correctly in the portal.
My issue is with the OTR texts maintained. The text for column headings in the table is binded with the OTR texts (created through transaction sotr_edit) $OTR:<package>/<alias> in properties value field.
We have an option to change the language in the portal. So when a language is selected, the texts for these column heading is displayed in the corresponding language selected.
But for some langauges selected, the texts show some random language instead of the one selected.
Any idea on how this can be corrected.

Thanks for the reply Thomas.
And sorry for delayed reply.
I could see that the binding of the OTR was not correctly done with the texts.
After i made the changes, the languages were displayed correctly.
My concern here is that i have made the changes as this is a custom development and the issue was solved.
But this same issue is seen in a standard component where the text was not displayed in the language selected and this issue is coming only for the users assigned to a particular role. And for all others, the texts are displayed with the language selected.
Any inputs on this would be helpful.
Thanks.

Public Holiday text not displaying in PT03 (Special Days)

Hi Experts,
For my client, I have to configure a public holiday and restrict it to only few WSRs. This public holiday is not part of any public holiday calendar. I have configured this holiday as a special day by defining the day type selection rule & special day.
When I checked the work schedule in PT03, it is not displaying the holiday class and the text of the public holiday. It is only displaying the day type for this day.
Please help.
Many Thanks for your help in advance.
Warm Rgds,
Arun.M

            qPane = new JScrollPane(qTextArea);
            qPane.add(qTextArea);
            performedOpsPane = new JScrollPane(performedOpsTextArea);
            performedOpsPane.add(performedOpsTextArea);
            logPane = new JScrollPane();
            logPane.add(logTextArea); When you create a scrolled component, you either pass the component to the JScrollPane constructor or add it afterward, not both. If you're going to add it afterward, you use the setViewportView() method, not add().

Static Text Not Displaying in Vista on modem connection

Similar Messages

Maybe you are looking for