Static Tools Logo Test fails

Hi,
i am running "Static Tools logo test" on 10G NIC.
The test fails with below error:
DVL test failed: Microsoft.StaticToolsLogo.ObjectModel.DvlException: DvlChecker: missing SDV DVL log content for driver 'cht4nx64' with the OS architecture 'x64'. at Microsoft.StaticToolsLogo.ObjectModel.DvlChecker.CheckDvl() at DevfundTests.DvlTest.DvlCheck()

Hi Prashant,
You have provide the DVL file of your driver and placed at C:\DVL folder. Please ask your Developer to create DVL file.
Thanks,
Mudit

Similar Messages

Static Tools Logo Test fails with Microsoft In-Box driver

We are running the WHCK tests on a NVMe storage device using the Microsoft In-Box stornvme.sys device driver. The Static Tools Logo Test is included in the list of test cases to be run.
Where do we get the required DVL file for the In-box driver?
Where do we get the required DVL file for the stornvme.sys file in the HCK? Some of the NVMe specific test cases copy a different stornvme.sys file to the test PC.
-Christine

Hi Prashant,
You have provide the DVL file of your driver and placed at C:\DVL folder. Please ask your Developer to create DVL file.
Thanks,
Mudit

Can't install iTunes! Windows logo testing fail

When my iPod touch displayed this error message "apple mobile device USB driver has not passed windows logo testing" an apple genius suggested I follow the kbase ht1925 article which then escalated my issues! I cannot reinstall iTunes and I receive this message now "the software you are installing has not passed windows logo testing"
I have a windows xp, and have not had issues prior to this because I have used many apple products.
Frustrated and music less windows user.

Hmm, as long as you downloaded iTunes from http://www.apple.com/itunes/download/ I'm tempted to ignore the warning and install anyway.
tt2

When I re-installed iTunes, it said it did not pass the "Windows Logo" testing for Windows XP. It did not install everything because of this. How do I fix this?

This is why it does not recognize my iPod Classic (it can't sync my iPod because it can't be found). Why does the Windows Logo test fail for Windows XP when trying to re-install iTunes?

On an XP system, that can indicate trouble with the Windows OS dlls associated with Cryptographic services.
I'd first try the fixit from the following Microsoft document.
You cannot install some updates or programs

Need software that has passed windows logo testing

can not install the wireless Officejet 6500. The 6500 is installed on the network. Message while do installation is "windows logo testing failed to verify compatibilty with windows XP" installation will not go beyond this point. The odd part of this is that I had it installed at one time and then the installtion failed.
I have tried your XP solutions and here is the message I received "an error ocurred during installation. The driver can not be installed because it is either not digitally signed or not signed in an approtriate manner"
Where do I go from here?

Hi callison11,
On the Software Installation screen with the 'Windows logo testing ' error, click Continue Anyway .
NOTE:You might receive more than one prompt about the software not passing Windows logo testing. Click Continue Anyway each time you receive the prompt.
Windows logo testing is part of Microsoft's WHQL (Windows Hardware Quality Lab) program, which helps customers identify products that are compatible with the Windows operating system. WHQL certification is not related to product functionality. You can still install and use the HP printer and software without the WHQL certification.
2. Follow the on-screen instructions until you get to the Found New Hardware Wizard screen. This screen might include a list of products and prompt you to Please select the best match for your hardware from the list below . Leave the selection at the default, and then click Next .
3. Continue following the on-screen instructions to complete the HP software installation.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Ldap test tool and auth failing after upgrade to 11gR2

Hi All,
We have recently upgraded our apex database from 10.2.0.3.0 to 11.2.0.2.0 using apex 3.2. We have been able to confirm that all apex applications work as expected apart from the apex ldap utility. The tool returns "Authentication failed!" even though the ldap server port and DN string have not changed from previously. We can confirm that ldap bind works as well as using the sql directly through the database.
Has anyone come accross any problems with something similar?
Thanks in advance,
Brett

Got it resolved. Since we are using a custom LDAP application we had to run the script not only for the DB account APEX_030200 but also the DB Account that is associated with the workspace containing the custom application or package.

IPod Updater Fails Windows Logo test

Just bought an iPod.
While attempting to install iPod Updater 2006-06-28, I receive a message indicating that the software does not pass the Windows Logo test. Initially, I had the software installed anyway which, in turn, rendered my computer significantly dysfunctional in a number ways. After doing a system restore, I did not have the Updater software installed which, of course, means that my iPod cannot be accessed through iTunes.
Any ideas on what I need to do to solve this?

I receive a message indicating that the software does not pass the Windows Logo test.
with that one, it might be a good idea to check on the possibilities from this document:
(MS) You cannot install some updates or programs

IPod Failed Windows logo test Erroe

I try to install software(CD that comes along with iPod) in my Dell Laptop, which has Windows XP home edition.
I get a Warning Message, saying that continuing installation will either impair or destabilize the system now or in the future, as the software is not undergone the windows logo testing.Not sure on how to proceed.
I cancel installation everytime.
I even tried downloading the software from the Apple website(iPod updater) and when i install it in my laptop, i get the same warning message.
has anyone come across the same thing? Or does any one know the solution for this? Pls. post ur reply.Thanks in advance.
Appreciate your help alot.
Dell Windows XP Windows XP home edition

hiya!
... that's a very strange message to be getting in these circumstances. so this is somewhat experimental advice. let's proceed very cautiously.
i did some checking about at Microsoft. the message can sometimes be mistakenly produced by the PC. perhaps the easiest way to check for that is to try going to Windows Update, and attempting to download an update from there.
do you get the same message if you try to install an update from Windows?
if so (and only if so), perhaps try checking through this document:
(MS) You cannot install some updates or programs
keep us posted.
love, b

Pavilion G6-1203ey: Hard Disk Test FAILED, but can still boot into Windows

Hello
I have HP Pavilion G6-1203ey laptop. After installing Windows (7 ultimate, 64 bit) and some drivers on it and after several restarts, it hanged at Windows logo and I had to turn it off with power button. Then after turning it on, it gave me the option to repair problems which are preventing it from starting up, from there I let it to restore the computer to an earlier restore point and after a restart the Windows was working again. After that I decided to do a hard disk check just in case.
The Hard Disk Self Test ended up with a message: Hard Disk 1 Full (305). Then I installed HP Unified Extensible Firmware Interface (UEFI) Support Environment and did hard disk from there. I chose the comprehensive test from the options, but it finished fairly quickly (in ~1 minute) with the following output:
Testing Drive: 1
Hard Disk SMART Check : PASSED
Hard Disk Short DST : FAILED
FAILURE ID : PTTU22-5T774L-MFPV4K-60S003
PRODUCT ID : A5Q15EA#B1R
Hard Disk 1
Hard Disk Test : FAILED
A bit more background:
The previous owner told me that the original HDD was faulty which is why he replaced it with this one last year. He said that other than that there has been no problems with the laptop. The Windows is working right now and this HDD is quite new so I would not have expected any problems with it, but the results from the previously mentioned tests seem troubling. Is there a reason to worry?
Thanks
This question was solved.
View Solution.

Hi Alnuir,
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I read your post and looked into the failure ID that you posted regarding the failed Short DST test. That error is indicating a hard disk failure meaning that if it hasn't failed it might soon. If everything is working I would considering backing up your data on a regular basis just to be safe. You could have a local technician take a look at the hard drive to see how close it is to full failure.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Adobe Acrobat 9 Pro Printer Drivers does not pass windows logo testing.

Issue:
I'am using the Acrobat Wizard tool to customize Adobe Acrobat 9 Pro to run create Adobe installed to run siliently within our network but I recieve the following hardware prompt to complete the install.
During the install of the Adobe Acrobat 9 Pro I recieve a Hardware Installation prompt:
The software you are installing for this hardware:
Printer
Has not passed Windows Logo testing to verfiy its compatibility with Windows XP.
Continue your installation of this software may impair or destabilize the correct operation of your system either immediately or in the future. Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing.
Is there any way I can download the drivers before I run the installation or is there a patch for Adobe Acrobat Pro 9.
Thanks
John T

When I start itunes i get the message "Itunes was not properly installed if you wish to burn Cds you will need to reinstall itunes" Any ideas what i should do anyone?
That sounds like the GEAR drivers that iTunes uses for burning and importing aren't going in properly. (or there's damaged GEAR drivers for an old install stuck on the PC.
Perhaps manually uninstalling and reinstalling the GEAR drivers can get you past this. There's instructions for that on the GEAR wiki:
[DRIVERS: Windows - Updating, removing, 64 bit versions, etc|http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:Windows_-_Updating%2C_removing%2C_64_bit_versions%2Cetc]

Windows Logo Testing message

I have a new ipod nano 8 gb. I have Windows XP SP3 and itunes 8.0. When I tried to set up my ipod, I got the message that "the software you are using has not passed the Windows Logo testing to verify its compatibilty with Windows XP". I can continue but it says it "may impaire or destabilize the correct operation of your system either immediately or in the future". I will probably just continue anyway but wanted to know if others are getting this message and if you have continued, have you had any problems? Should I back up all my data on my harddrive first, just in case?

Just to establish a good base line I am going to have you uninstall and reinstall the printer from our website rather than the CD-ROM that came with the machine.
First if you use a USB cord, make sure to remove it. Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
Then follow this link to download the full feature software and drivers for the printer:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=5061073&
Install that using the USB >> Wireless setup wizard and establish a static IP (video below on that) :
Assigning a Static IP Address to Your Wireless HP Printer - Windows 7 - YouTube
Have a great day!

"Not passed Windows logo testing" message

I just download iTunes 8 and partway through the install got a message that said "software has not passed Windows Logo Testing" and that this could compromise my system.
The older version of iTunes worked just fine, is there anywhere I can download the older version?

Just to establish a good base line I am going to have you uninstall and reinstall the printer from our website rather than the CD-ROM that came with the machine.
First if you use a USB cord, make sure to remove it. Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
Then follow this link to download the full feature software and drivers for the printer:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=5061073&
Install that using the USB >> Wireless setup wizard and establish a static IP (video below on that) :
Assigning a Static IP Address to Your Wireless HP Printer - Windows 7 - YouTube
Have a great day!

Pop Up: The software you are installing for this hardware has not passed Windows Logo testing - AntiVirus

When deploying Endpoint Protection with SCCM 2012, some workstations are getting a popup saying:
The software you are installing for this hardware has not passed Windows Logo
testing and it references "Antivirus". Upon clicking continue anyway it finished installing.
I'm not able to duplicate it on command and not sure why it's happening. Anyone else see this or have ideas on how to troubleshoot?

Without a real screenshot (and maybe even being there), it's hard to say. IME this is not normal behavior and my first thought is that this is actually some malware causing this.
Jason | http://blog.configmgrftw.com
Sorry it took a while, was waiting for it to happen again. Here is an actual screen shot. I'm leaving it until I hear back from you guys. This client actually shows that the endpoint protection deployment state failed with this message:
Description: 0x8004FF03.
InstallUpgradeOrUpdateInProgress=4.1.509.0

Workflow configuration error - System Account connection test failed

Hi,
Has anybody faced a problem with Workflow configuration? The version we are using is 2.6.2 on Oracle database 9.2.0.5 on AIX5L. The workflow installation from 9.2.0.1 installation CDs goes through without any problem. But when the workflow configuration tool comes up it fails with the following error.
"SYSTEM account connection test failed".
The system and sys accounts are fine as verified by sqlplus. Any help is greatly appreciated.
The log file is shown below.
Workflow Configuration Assistant-AIX
WorkflowCA:
WorkflowCA: Workflow Configuration in progress...
WorkflowCA:
WorkflowCA: Screen width -2304-, screen height -1024-
WorkflowCA: Graphics User Interface mode
WorkflowCA:
WorkflowCA: Language - US
WorkflowCA:
WorkflowCA: Start testing connection, which takes less than 3 minutes.
WorkflowCA:
WorkflowCA: Account connection test for SYSTEM
WorkflowCA: SQL Thread: Thread[TstSQL,5,main]
WorkflowCA: chkSQL: true
WorkflowCA: cmdLine: /app/oracle/product/9.2.0/bin/sqlplus system/<Masked Password> @/app/oracle/product/9.2.0/wf/sql/wftstcon.sql
WorkflowCA: envVar[0]: -ORACLE_SID=rsdb-
WorkflowCA: envVar[1]: -ORACLE_HOME=/app/oracle/product/9.2.0-
WorkflowCA: envVar[2]: -WF_RESOURCES=/app/oracle/product/9.2.0/wf/res/wfus.res-
WorkflowCA: envVar[3]: -TZ=EST5EDT-
WorkflowCA: envVar[4]: -WF_NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1-
WorkflowCA: envVar[5]: -PATH=/app/oracle/product/9.2.0/bin:/app/oracle/product/9.2.0/lib:$PATH-
WorkflowCA: envVar[6]: -LD_LIBRARY_PATH=/app/oracle/product/9.2.0/lib-
WorkflowCA: envVar[7]: -WF_TNS_ADMIN=/app/oracle/product/9.2.0/network/admin-
WorkflowCA: envVar[8]: -WF_SHLIB_PATH=/app/oracle/product/9.2.0/lib-
WorkflowCA: Exit Val : 126
WorkflowCA: chkSQL is alive after 1 seconds: false
WorkflowCA: SYSTEM account connection test failed.
WorkflowCA: Terminating...
Thanks,
Chethan

We had this problem on 2 machines.
On the 1st machine, we tried the local install option after a few days (Local option with no connect string) and it worked with no problems!
On the 2nd machine, we could never get it to work even after opening a tar with Oracle. Finally we did a remote install from the 1st machine into the database on the 2nd machine. During the remote install while running wfinstall on the 1st machine, we just had to choose the remote option and the database service name for the connect string.
Thanks,
Chethan

SoundMax Digital Driver not digitally signed and not passed logo testing

Hi HP Community,
My sound is going in and out (skipping). The speakers are not blown out.
I have tried in this order
uninstalling Soundmax and restarting the computer
updating driver through control panel>system>driver
using hp.com software/driver page and installed ADI 1981B Audio driver (sp34210.exe version 5.12.1.5410 C) an error message reads, "SoundMAX Integrated Digital Audio has not passed Windows Logo testing to verify its compatibility with Window XP" I selected continue anyway.
used Driver Recovery DVD and an error message reads, "SoundMAX Integrated Digital Audio has not passed Windows Logo testing to verify its compatibility with Window XP" I selected continue anyway.
Through all this I noticed that it is not digitally signed
The sound still sounds bad. Is it even the driver?
What is going on and suggestions?
OS: Window XP 32 bit
HP Pavillion dv4155cl
Thanks

Just to establish a good base line I am going to have you uninstall and reinstall the printer from our website rather than the CD-ROM that came with the machine.
First if you use a USB cord, make sure to remove it. Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
Then follow this link to download the full feature software and drivers for the printer:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=5061073&
Install that using the USB >> Wireless setup wizard and establish a static IP (video below on that) :
Assigning a Static IP Address to Your Wireless HP Printer - Windows 7 - YouTube
Have a great day!

Static Tools Logo Test fails

Similar Messages

Maybe you are looking for