Static Virtual Channels For MAC Client (v8.0)

Hi,
   In Windows we have feature of Static Virtual Channels for addins.
http://msdn.microsoft.com/en-us/library/aa383546(v=vs.85).aspx
   How to use Static Virtual Channels in MAC Client ?

Hi,
As far as I know, the Microsoft Remote Desktop App for Mac has limited support for Virtual Channels.
It only supports Remote Audio playback, printer and folder redirection.
Thanks.
Jeremy Wu
TechNet Community Support

Similar Messages

  • How to run .exe files with Virtual PC for Mac

    Hey Guys, I'm new around here and with mac technology as well. Anyway, I have an iMac OS X 10.5.1 Leopard and I've recently purchased the Virtual PC for Mac 7.0.2 software. So I'd like to know how to use this program properly, because I need to run some executable files in my computer. It is confusing for me because I don't know how to get started, and I only get to the part when it says "OS not found, Install an OS on this hard drive".
    Honestly I've no idea of what an OS is or where do I get that. So I'd really appreciate if one of you guys could tell me, step by step, what to do to use Virtual PC properly, and finally learn how to run .exe files on mac.
    Thanks in advance!
    Have a nice day!

    Always nice to see new faces
    Honestly I've no idea of what an OS is or where do I get that.
    This brings up the second part of your problem. The first part is setting up either a proper Virtual Machine program like Parallels or VMfusion, or setting up a Boot Camp partition on your drive.
    http://www.parallels.com/
    http://www.vmware.com/products/fusion/
    OS stands for Operating System. You are running Leopard 10.5.7 as an operating system on your Mac (MacOS X).
    The second part of your problem - You will need a copy of Windows XP or Vista if you want to run Windows on your Mac.
    There is at least one other solution for running Windows programs on a Mac. It's called "CrossOver" by a company named 'Codeweavers'. It's based on a project for "Wine" to be able to run PC programs on a Mac or Linux, without having to buy or install Windows. It works with a narrow subset of Windows programs so you would want to make sure the program you want to run is compatible with CrossOver before you buy it.
    http://www.codeweavers.com/products/cxmac/
    In addition to all the above information, you need to upgrade your Mac to the latest 10.5.7 from 10.5.1. "Software Update" is located under the black Apple icon in the Menu Bar at the top left corner of your monitor. After you are updated you will want to update your Profile here so that it shows the proper OS version.
    With your level of experience with MacOS X and the Windows OS's you should probably get some help from a local Apple store. They have an appointment system and do offer many types of help and training, and they can offer assistance with choosing the proper programs for you to purchase for your machine.
    You are also welcome to continue to ask questions here, of course. You will want to ask your questions with different issues that come up in different threads so that the answers stay focused on the title of the thread.
    Message was edited by: dechamp to try to be more accurate with a fairly complicated issue...

  • Virtual Machine Additions in Virtual PC for Mac 7.0.2

    I'm also new to Virtual PC for Mac and will try some of the suggestions for speeding it up; it is painfully slow. However, I have another but related question.
    I keep getting a prompt when I boot Windows XP Prof. and it opens Virtual. It tells me that after I see my Windows desktop, I should install and update Virtual Machine Additions from the PC Menu. My problem is, I can't figure out how to do that. When I'm in Windows, I've explored everything I can find......Menu...Control Panel...Applications, but I can't find anything that shows Virtual PC running so I can't get to the menu that should take me to updates. When I open just Virtual from my Mac desktop (w/o opening Windows) it checks for updates on Virtual PC for Mac but not Virtual Machine Updates. Neither can I find anything on Machine Updates when I search Apple or this support site. When I search Yahoo, it says I have to be running it to update....kind of full circle with it.
    Can anyone help re: how to do Virtual Machine Addition Updates? Thanks.

    Oops...tried it again..new problem. When I open Virtual, this is the message I get. When I boot from Windows it works........
    "OS not found
    Install an OS on this hard drive
    Reboot and Select proper Boot device
    or Insert Boot Media in selected Boot device"
    Think I'll uninstall and re-install e'thing from the Virtuall PC for Mac CD. Hate to do it.......just spent a long time y'day doing 17 security updates.
    Maybe reinstalling I'll be able to do Machine updates.
    Thanks for the help.

  • Virtual PC for Mac Version 7 and Office mac 2004

    Hi,
    Just a quick question. How many CDs do come in:
    - Virtual PC for Mac version 7 with Windows XP Pro
    and
    - Office mac 2004?
    Thanks for your help.

    Here is some info from the contents of my VPC boxes.
    VPC 7  with Windows XP Home ed. has 3 CDs - Installation 1, Installation 2, and Additional Windows System Files.   Requires MacOS X 10.2.8+, 700Mhz G3, G4, or G5 processor, 512 RAM.
    VPC 6  with Windows XP Home ed. has 2 CDs - Installation, and Extra System Files. Requires Mac OS 9.2.2 or Mac OS X 10.2.1+, 500Mhz G3 or G4 processor, 320 RAM.
    I do not have Office Mac 2004 so can't help you there.

  • How to define a separate virtual host for each client in SICF

    Hello,
    We have an ERP system with multiple clients running on it. The WebDynpro ABAP applications once developed are available on all clients, as standard. However, this is not our desired behavior. We want:
    1. The WebDynpro ABAP applications should be managed separately in SICF depending on the client
    2. The URL for accessing the WebDynpro application should have a own host name for each client. e.g.
    A WebDynpro application on client 100 should be accessed by http://host1:5000/sap/bc/... and the same application on client 200 should be accessed by http://host2:5000/sap/bc/...
    After a while researching I find out that creating a virtual host for each client in SICF would be a possible solution to fulfill the above mentioned requirments:
    1. Set the profile parameter is/HTTP/virt_host_* with corresponding host name and port number
    2. Create a new virtual host in SICF assigning the profile paramter to it
    3. Assign a client to this virtual host
    My question is how to specify a client to a virtual host? I didn't find any possibilities in SICF!
    Anyone can help me? Thanks a lot in advance!
    Best Regards
    Di Li

    Hi Srikishan,
    thanks for your reply. Your suggested way is certainly a potential, and also my preferred option for solving the multiple-client-capable URL access to WebDynpro / BSP applications.
    However, for some reasons, based on the customer requirements, the client should not be visible in the URL. The URL for accessing the WebDynpro / BSP applications on different client should have different host name, as if they are different companies. Besides that, we want to manage each WebDynpro / BSP application on different clients in SICF separately.
    Therefore, at least on my opinion, we need to introduce a virtual host for each client in SICF. But how do I make it happen?
    Regards
    Di

  • How to define a separate virtual host for each client in ICF for WebDynpro

    Hi,
    We have an ERP system with multiple clients running on it. The WebDynpro ABAP applications once developed are available on all clients, as standard. However, this is not our desired behavior. We want:
    1. The WebDynpro ABAP applications should be managed separately in SICF depending on the client
    2. The URL for accessing the WebDynpro application should have a own host name for each client. e.g.
    A WebDynpro application on client 100 should be accessed by http://host1:5000/sap/bc/... and the same application on client 200 should be accessed by http://host2:5000/sap/bc/...
    After a while researching I find out that creating a virtual host for each client in SICF would be a possible solution to fulfill the above mentioned requirments:
    1. Set the profile parameter is/HTTP/virt_host_* with corresponding host name and port number
    2. Create a new virtual host in SICF assigning the profile paramter to it
    3. Assign a client to this virtual host
    My question is how to specify a client to a virtual host? I didn't find any possibilities in SICF!
    Anyone can help me? Thanks a lot in advance!
    Best Regards
    Di Li

    Hi Srikishan,
    thanks for your reply. Your suggested way is certainly a potential, and also my preferred option for solving the multiple-client-capable URL access to WebDynpro / BSP applications.
    However, for some reasons, based on the customer requirements, the client should not be visible in the URL. The URL for accessing the WebDynpro / BSP applications on different client should have different host name, as if they are different companies. Besides that, we want to manage each WebDynpro / BSP application on different clients in SICF separately.
    Therefore, at least on my opinion, we need to introduce a virtual host for each client in SICF. But how do I make it happen?
    Regards
    Di

  • Why is the input mode greyed out when I try to create a virtual channel for my 1102?

    I have set up a virtual channel for my SCXI-1102, and the input mode is greyed out with it set to "differential". I have already skimmed this forum for answers, and I have checked to verify that the mode slot under the AI tab for my MIO-E series card is set to nonreferenced single-ended mode. I then created a virtual channel with the device slot under the hardware column set to Dev1_SC1_MD1CXI-1102. At this point, as already stated, the input mode goes grey while set to differential. What's going on?

    Hello,
    All outputs from the SCXI module are measured in differential mode. You can still mix differential and single ended measurements (if you use the remaining channels of your daq board).
    The easiest way to mix modes is with virtual channels. All SCXI analog input channels will be differential, while you can make other virtual channels differential or single ended. If you don't want to use virtual channels, you can use AI Hardware Config in LabVIEW to change the mode.
    Hope this helps. Regards,
    John N
    Applications Engineer
    National Instruments

  • Set Static IP address on Mac clients

    Hi,
    I'm trying to change the IP address on a mac client at startup time to a different value and to be Static type. I need to do it via the command line. I've researched and found out that 'networksetup -setmanual ...' and 'ipconfig set en0 MANUAL ...' would do it, but the 'networksetup' command is not available unless I have ARD installed and 'ipconfig' is not recommended for use other than testing and debug.
    Another option I was looking at is editing /Library/Preferences/SystemConfiguration/preferences.plist and then doing 'changeip ...' command.
    Do you know if there are any other commands that will allow me to change an ip address via the command line, set it to Static/Manual and preferably do it without a reboot?
    Thank you

    Hi Sergey,
    when I use static IP in my jwc_properties.ini it is never picked up, it still uses DHCP. The part where I have configured IP looks like this:
    # Whether static configuration or DHCP server is used do get IP address. Possible values: dhcp,static
    ip.method = static
    # IP address,used with static IP configuration only
    ip.addr = 10.143.144.97
    # Network mask,used with static IP configuration only
    ip.netmask = 255.255.252.0
    # Network gateway,used with static IP configuration only
    ip.gateway = 10.143.144.1
    # DNS server,used with static IP configuration only
    ip.dns =
    # MAC address
    mac.addr =

  • Endpoint Protection for Mac client 4.5.21.0

    I'm trying to locate where to download the latest version of the SCEP client for Mac.  Any one know the download site?  Thanks.

    Hi,
    It is only available on the Volume License site, there you will find the .iso to download, it is not published anywhere else.
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • Virtual Monitor for VNC Client/Remote (Increase Avail. Screen Size)

    Now:
    I have multiple Macs in my home. From time to time, I use a desktop Mac with a larger monitor to "Screenshare" work off of another Mac's (laptop) HDD. (It's the primary base of my files.)
    Screen Size and Resolution:
    Laptop 13" - 1280x800
    Desktop 19" - 1680x1050
    Goal:
    I would like to have a "Virutal Monitor" on the 13" Laptop so that I can take advantage of the increased screen real estate on the Desktop's 19" Display. When I have a 2nd Display connected to the 13" MacBook Pro, it has the benefit of the larger display accessible.
    Questions:
    Is there a way to easily fake the MacBook Pro into having a virtual monitor? Available to all of OS X including Spaces/Expose/Screen Sharing?
    So I could use Settings to drag the primary system bar over to the virtual monitor, for when I am working on the remote Mac?
    -OR- Should I ask how to SSH into my machine and use its resources without the screen sending taking up bandwidth? Does Apple Remote Desktop do something like this?
    Your help and tips are appreciated!

    I'd like to do something similar so would be interested if you've found a way of doing this?

  • Virtual PC for Mac with Windows XP Professional

    I have two questions.
    1. My VPC crashed (blue screen of death) on our powerbook G4 15 inch, and it states that the problem is a "unmountable boot volume." Is there I way I can correct this, I have programs on the VPC which would take a long time to reinstall?
    2. I am considering purchasing a Macbook and wonder if I can use the Windows XP professional from my Virtual PC 7 with windows XP professional in boot camp? I doubt it, but thought I should at least ask.

    Hi and welcome to Discussions,
    I don't know about question 1. Might be one to ask in the Microsft forums.
    http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft. public.mac.virtualpc&cat=enUS595a5881-be4a-4db4-97b0-5f3a78602e23&lang=en&cr=US
    For question 2. see here: http://www.macosxhints.com/article.php?story=20060527175405403
    Regards
    Stefan

  • Settings for MAC client

    Hi. We have SBS 2011 with Exchange 2010 SP3.
    Some external staff use MAC OS and apple Mail client. Now they get some problem.
    1) when they deleted some mail from inbox - deleted mail still keep in OWA
    2) sometimes connection is lost.
    3) when connection restored, Mail client downloading deleted email.
    That i must configure for best work apple Mail client with Exchange 2010 SP3 ?
    Thank you!

    10.8.4
    Now,
    i try reorganise folders for best performance. Some folders have more than 5000 messages...

  • Need reasons not to use SMB/win2003 as file server for mac clients

    hey guys,
    i'm looking for reasons not to use windwos2003 as fileserver with smb for use with os x in a graphic production environment.
    can someone help? just need a sum up for "internal use"
    smb seems to be slower than afp
    etc...
    thank you!

    Well, it tends to be that saving over the network from Adobe and Quark apps "just works better" over AFP than it does over SMB.
    Put another way, people wouldn't be paying $4000 for a software license form Extreme-ZIP so they can serve AFP from a Windows 2003 server if there wasn't a real benefit to this. You can get an Xserve for this same $4000

  • How to Get Outlook Client Version for MAC from Exchange 2010

    Hi, 
    I want to know how many users in my organization are using Outlook for MAC or Email for MAC. What is the best way to extract this information from Exchange 2010 server. I can read the RPC Client Access logs by running logparser:
    logparser.exe "SELECT distinct extract_suffix(client-name,0,'=') as User,client-software,client-software-version as Versio
    n,client-mode,client-ip,protocol from 'D:\RPC\EXTC03\RCA_2014*.log' WHERE (operation='Connect') GROUP BY User,client-software,Version,client-mode,client-ip,protocol ORDER BY User" -nSkipLines:4 -i:CSV -rtp:-1 > D:\RPC\EXTC03\EXT
    C03.TXT
    How to extract Outlook for MAC clients from this command? 
    Hasan

    Hi Hasan,
    As far as I know, Outlook for Mac (Office 2011) uses Microsoft's EWS (Exchange Web Service). So you probably need to collect and focus on EWS logs, not RCA.
    Anyway, Karl is right that you'd better post your question in our Exchange forum, where you can get more experienced responses:
    https://social.technet.microsoft.com/Forums/exchange/en-US/home?category=exchangeserver
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Error 10403 in Virtual channel Test Panel, but test pannel for device works fine

    I am using a simple 10x probe attatched to the NI5112 PCI card. When the device is tested under the devices and interfaces part of MAX, I get the scope input, when I test the virtual channel for the scope, i get error 10403. How can i resolve this?

    The reason you get that error is that virtual channels are not supported with our high-speed digitizers. Only devices that can be programmed directly with NI-DAQ support virual channels. The legal way to address a high-speed digitizer is by using DAQ::N, where N is the device number in MAX.

Maybe you are looking for