Static vs dynamic CAM entries

Hi,
I am trying to understand the appearance of static CAM entries on a CatOS switch when an IP phone + user PC is connected.
As expected I see the end host(PC), plus IP phone MAC in the CAM table as a dynamic entry. But I also see a static CAM entry, I guess its the MAC of the IP phone's switch.
Looking at the output of "sh cam dynamic x/x" the listed 'destination port' for the addresses is the switch access port the devices are connected to, thats a given.
However the auto detected/generated static address in the CAM table has a destination of multiple ports, all of which seem to be the trunk uplinks to distribution switches. Second the static cam entry uses an unusual MAC, begining with 01 instead of 00.
Can anyone ellaborate on this behaviour, and the unusual MAC address?
I ran a quick test connecting several different switches to the catalyst access port and all of them appear to create a 'static' entry in the CAM table on the catalyst 65xx, using a MAC starting with 01x.
Thanks,

show cam dynamic are just what they are mac-addresses learned by the switch dynamically through the traffic generated by these devices using the source mac-address. The mac-addresses on show cam static are multicast L2 mac-address like 01-00-5e-00-xx-xx. You will see the same mac-address with show multicast group. It does not mean someone or the system had configure a static cam entry otherwise you will see a "*" for that static entry.

Similar Messages

Static Vs Dynamic Safety stock

Hello Gurus
I want to know the following
1. Whats a Dynamic Safety Stock ?
2. The basic difference between Static Vs Dynamic Safety Stock
3.In which business scenario do we use a Dynamic & in which cases Static safety stock -

Dear Raja,
There are two types of availability checks
1) Availability Check for stock types in Inventory Management (Static Availability Check):
This check takes only the existing stock at the time of entry into account. This check is carried out automatically & no setting can be made for it in the system .It covers the relevant stock affected at the plant, storage location & special stocks level. The stock affected is determined via the movement type.
Ex: If you enter transfer posting with mvt 321 for 20 nos from Quality to unrestricted the system checks whether 20 nos.are actually available in Quality stock
2) Check of available stocks from the view point of MRP (Dynamic availability check):
In this case in addition to stock physically available in warehouse, here planned receipt & issues can also be taken into account. This check enables you to prevent an already reserved quantity from being withdrawn or reserved for another purpose.
For Ex; Today we have a stock of 100 nos. 25 pieces are reserved for withdrawal tomorrow & another 25 nos are reserved for day after tomorrow which means only 50 pieces are available today. If you try to create another reservation of 60 nos today system will give warning or error message.
Hope this will clear your concept
Vivek

OSB: Static Vs Dynamic Routing With "Get All Headers"

Hi
How Static and Dynamic Routing works when calling Business Service pointing to a service inside or out-side the domain with respect to carrying "Get All Headers".
The scenario is
I have two BIZ services of http protocol, B1 pointing to a serive with-in the same domain and B2 pointing to a serivce outside the domain.
Now i am calling both BIZs throught Static and Dynamic Routing
1. Proxy X calls BIZ1 using Static Routing
2. Proxy X calls BIZ1 using Dynamic Routing
3. Proxy X calls BIZ2 using Static Routing
4. Proxy X calls BIZ2 using Dynamic Routing
Question: In all 4 cases, does "Get All Headers" get passed to called service?. How is the behaviour?
Thanks
Venkata Madhu

If you're getting errors like -
ORA-12514: TNS:listener does not currently know of service requested in connect
And you're database has been started you can -
'alter system register'
and that will register the database with the listener.
If you are trying to start up databases remotely you need to have a static entry (listener.ora entry) otherwise you will not be able to connect to the database and will get the above error. I've seen people connect remotely, shutdown the database, try startup and they are not able to. Good way to shoot yourself in the foot.

Static or Dynamic Reorder Point and Safety Stock

Hi,
In a retail scenario, what would be the advantages over the other of setting a static or dynamic reorder point and safety stock?
The MRP type used is Time Phased Planning, but whether to let the system automatically set the reorder point and safety stock is the question. What should be considered in implementing this?
Regards,
Lee

hi,
As far as i know is static means manual entry of reorder point.
The dynamic or automatic reorder point is used for Forecast based planning...
the sysstem wii automatically calculate the reoder point evrytime there is the forecast run.
So, it dependig on ur scenario , select either manual or automatic.
First entry for both is always manual entry....
hope u got this..
Regards,
Smitha

Credit Management: Difference Between Static and Dynamic Credit Check

Hi,
Could anyone tell the difference Between Static and Dynamic Credit Check?
According to website: http://www.sap-basis-abap.com/sd/difference-between-static-and-dynamic-credit-check.htm ... this is the answer:
====================
Simple Credit Check : Tr.Code - FD32
It Considers the Doc.Value + Open Items.
Doc.Value : Sales Order Has been saved but not delivered
Open Item : Sales Order has been saved , Delivered, Billed & Transfered to FI, but not received the payment from the customer.
Static Credit Check it checks all these doc value & check with the credit limit
1) Open Doc.Value / Sales Order Value : Which is save but not delievered
2) Open Delivery Doc.Value : Which is delivered but not billed
3) Open Billing Doc.Value : Which is billed but not posted to FI
4) Open Item : Which is transfered to FI but not received from the customer.
Dynamic Credit Check         1) Open Doc
                                            2) Open Delivery
                                            3) Open Billing
                                            4) Open Items
                                            5) Horizon Period = Eg.3Months
Here the System will not consider the above 1, 2, 3 & 4 values for the lost 3 months.
====================
Question 1: Could you further explain the above information, if there is any?
Question 2:: What is the Tcode to customize settings of:
a) Simple Credit Check (isn't this same with b) below?)
b) Static Credit Check
c) Dynamic Credit Check

Hi Tanish,
Diff between Static and Dynamic Filters.
Example One at report Level.
Create a variable for a Infoobject say ,Material .
1)In the Query Designer and if u restrict it to some 10 materials at query level, the report will display for only those 10 materials only.This is Static Filter.UR AHrdcoding it to those materials.You cant change them at Query Run time.i.e not changeable by user.
2)If u give the variable as input ,and when u run the query ,u can can choose the material,may 10 may be 1 or may 20 .It is dynamic.Changeable by user at run time
Example Two at DTP and Start Routine Level,say Document Type.
1)If u give filters in Start routine it is Static as u cannot change it in Production,not changeable by user.
2)f u give filters in DTP it is Dyanamic as u can change it in Production.U can give any doc type,Changeable by user at run time.
Hope it is Understood.
Rgds
SVU

Perform static and dynamic check together on a customer?

Hello All,
Is it possible to perform static and dynamic check together on a customer?
I believe standard SAP does not allow both options together.
The scenario is: My client has customer who orders products 1 year in advance and create sales order with a future delivery date. The customer might have balance due on their account which is close to the credit limit. As a result the sale order should be blocked as if the automatic credit check is "Static". This would allow our customer service to call the customer and arrange for the payments.
Then 11 months later, a dynamic check should be performed on the customer to make sure the past due is under the credit limit. If the past due is over credit limit, the sales order must be blocked for delivery as if the credit check was "Dynamic" with 30 days horizon. This would again give our customer service time to settle the payment with the customer.
If anyone has implemented such a scenario, can you please give me an overview of how you did it?
Thanks very much in advance and Text Removed.
With Regards,
AM
Edited by: Lakshmipathi on Nov 13, 2010 9:23 AM
Please dont include this text

Static and Dynamic Cannot be Performed together. They are mutually exclusive events.
Credit check can be performed either at Sale order level or at Delivery / PGI Level.
FCV3 is a good report to see whether a customer would fail a credit check. ( suitable for your customer service )
Coming to your Point , Assuming that the customer is eligible for a Credit of 50 Lacs. Now the Customer has placed an order for 60 Lacs. We set the Customer credit checking at order level . The Customers Sale order would get blocked.
The Customer service will follow up for the payment and see to it that it is made. Assume the customer has made a payment for 70 Lacs.
Now let us have a look at the account statement of the customer.
Account Statement : Customer Cr : 70 Lacs. Dr : 0. ( because no delivery and invoice so far has been made )
So we are supposed to deliver the Material worth value of 60 Lacs.
The First sale order worth 60 Lacs has been unblocked in VKM3. Now at the time of Delivery level why would you want to chekc the Credit limit again ? It has already passed the credit check.
It is not necessary to check credit limit . Because you have already performed the same at the order level.
Now the customer has come again and raised another sale order for 80 Lacs. The System would block him.
The system will never block the Previous delivery which you are, due for delivery to the customer.
If we keep on checking the Credits without delivering we would end up only raising in Sale orders and no Delivery to the Customer at all. The Debit side of his account will always be 0.
So i donot think Static and dynamic is needed . you can go for either Static or Dynamic.

Mixing static and dynamic content in a single outputText value causes NPEs

Hi,
I am having a problem and I'm wondering if it is a result of my error or if this is a bug.
I am mixing dynamic and static content in the value attribute of tags (e.g., outputText). On initial page load, everything works fine. However, if the same view is reloaded (e.g., after a failed validation) I get an NPE from JSF:
[#|2006-10-24T08:49:03.756-0500|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=12;|StandardWrapperValve[Faces Servlet]: Servlet.service() for servlet Faces Servlet threw exception
java.lang.NullPointerException
        at com.sun.faces.el.MixedELValueParser.getNextToken(MixedELValueParser.java:140)
        at com.sun.faces.el.MixedELValueParser.parse(MixedELValueParser.java:123)
        at com.sun.faces.el.MixedELValueBinding.getValue(MixedELValueBinding.java:60)
        at javax.faces.component.UIOutput.getValue(UIOutput.java:147)
        at com.sun.faces.renderkit.html_basic.HtmlBasicInputRenderer.getValue(HtmlBasicInputRenderer.java:82)
        at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.getCurrentValue(HtmlBasicRenderer.java:201)
        at com.sun.faces.renderkit.html_basic.LabelRenderer.encodeBegin(LabelRenderer.java:128)
        at javax.faces.component.UIComponentBase.encodeBegin(UIComponentBase.java:683)
        at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:443)
        at com.sun.faces.renderkit.html_basic.GridRenderer.encodeChildren(GridRenderer.java:233)
        at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
        at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:445)
        at com.sun.faces.renderkit.html_basic.GroupRenderer.encodeChildren(GroupRenderer.java:130)
        at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
        at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:445)
        at com.sun.faces.renderkit.html_basic.GridRenderer.encodeChildren(GridRenderer.java:233)
        at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
        at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:445)
        at com.sun.faces.renderkit.html_basic.GroupRenderer.encodeChildren(GroupRenderer.java:130)
        at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
        at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:445)
        at com.sun.faces.renderkit.html_basic.GridRenderer.encodeChildren(GridRenderer.java:233)
        at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
        at javax.faces.webapp.UIComponentTag.encodeChildren(UIComponentTag.java:609)
        at javax.faces.webapp.UIComponentTag.doEndTag(UIComponentTag.java:546)
        at com.sun.faces.taglib.html_basic.PanelGridTag.doEndTag(PanelGridTag.java:460)
        at org.apache.jsp.registration_jsp._jspx_meth_h_panelGrid_0(registration_jsp.java:324)
        at org.apache.jsp.registration_jsp._jspx_meth_h_form_0(registration_jsp.java:223)
        at org.apache.jsp.registration_jsp._jspx_meth_f_view_0(registration_jsp.java:157)
        at org.apache.jsp.registration_jsp._jspService(registration_jsp.java:118)
        at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:105)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
        at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:336)
        at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:297)
        at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:247)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
        at sun.reflect.GeneratedMethodAccessor188.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
        at java.security.AccessController.doPrivileged(Native Method)
        at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
        at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
        at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
        at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
        at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
        at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
        at java.security.AccessController.doPrivileged(Native Method)
        at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
        at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:723)
        at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:482)
        at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:417)
        at org.apache.catalina.core.ApplicationDispatcher.access$000(ApplicationDispatcher.java:80)
        at org.apache.catalina.core.ApplicationDispatcher$PrivilegedForward.run(ApplicationDispatcher.java:95)
        at java.security.AccessController.doPrivileged(Native Method)
        at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:313)
        at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:326)
        at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:132)
        at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
        at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:248)
        at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
        at javax.faces.webapp.FacesServlet.service(FacesServlet.java:194)
        at sun.reflect.GeneratedMethodAccessor202.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
        at java.security.AccessController.doPrivileged(Native Method)
        at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
        at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
        at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
        at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
        at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
        at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
        at java.security.AccessController.doPrivileged(Native Method)
        at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
        at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
        at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
        at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225)
        at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
        at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
        at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)
        at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
        at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:132)
        at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
        at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
        at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:189)
        at com.sun.enterprise.web.connector.grizzly.ProcessorTask.doProcess(ProcessorTask.java:604)
        at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:475)
        at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:371)
        at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:264)
        at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:281)
        at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:83)My code looks like this:
<h:outputText escape="false"
          value='<link href="#{myBean.styleSheet}" rel="stylesheet" type="text/css" />' />If I replace this with a much more convoluted set of tags, it works:
<h:outputText escape="false"
          value='<link href="' /><h:outputText escape="false" value="#{myBean.styleSheet}"
          /><h:outputText escape="false" value='" rel="stylesheet" type="text/css" />' />So is the problem that I am mixing dynamic and static content with a single value? If so, why does it work on the first view, and not after?
If it matters, I'm using the reference implementation version 1.1 (as included with NetBeans 5.5RC2) on SuSE 10.0 w/ JDK 1.5_09.
Thanks,
Bill

Yes, that's how I originally had it, but then changed it to the outputText approach since a single tag could do what I wanted, as long as I was allowed to mix static and dynamic content within a single value.
I think this is a bug in JSF 1.1, since if what I am doing is illegal, it should throw an exception on the first page view, not work on first view and throw an exception on subsequent views. I'm guessing that this has something to do with the fact that on first page view it only runs the restore view and render response JSF phases, while on subsequent requests all of the phases will be run, and it's in one of those other phases that the exception is thrown.
For now, multiple tags is the work-around, I guess.
Thanks,
Bill

How to specify "static" or "dynamic" text in Flash CS5?

Hmmm. Things have moved in version CS5! How would I specify text as "static" or "dynamic"? Can't seem to find the selection in the Properties palette.
Thanks-

Should be right at the top of the properties panel. Make sure to select your text box first. Also, change TLF text to classic text.

Selecting both static and dynamic values in a report.

Hello,
I am using the following LOV for a select list in a form based on another post (Re: Static and Dynamic LOV ordering
It is presenting five static values along with a dynamic LOV.
select d, r
from (select n, d, r
from (select 1 as n, 'NAME_A' d, 1 r
from dual
union all
select 1 as n, 'NAME_B' d, 2 r
from dual
union all
select 1 as n, 'NAME_C' d, 3 r
from dual
union all
select 1 as n, 'NAME_D' d, 4 r
from dual
union all
select 1 as n, 'NAME_E' d, 5 r
from dual
union all
select 2 as n,
(LNAME || ', ' || FNAME || ' (' ||
to_char(DOB, 'MM/DD/YYYY') || ')') display_value,
ID return_value
from my_name_table)
ORDER BY n, r asc)
The static display and return values do not exist in my_name_table, but the static return values are recorded in my_main_table when the user submits the form.
The tables look like this:
my_main_table:
record_id
name_id
my_name_table:
name_id
fname
lname
How can I present the display values associated with the static return values recorded in my_main_table along with the dynamic display values in a report? I am currently presenting the dynamic portion in a report using the following select statment:
select
(my_name_table.LNAME||', '||my_name_talbe.FNAME) AS Name
from my_name_table
WHERE my_main_table.NAME_ID = my_name_table.NAME_ID
I have the additional problem that the static return values are not in my_name_table so the join in the last statement will not find the static values in my_name_table.
Edited by: mterlesky on Feb 24, 2009 9:51 AM

1. You will need to add an outer join to return all the values in the Main table.
2. Then decode the values for the static LOV.
Something like (this is not tested, but should give you the idea)
select
decode(my_main_table.NAME_ID,1,'NAME_A',2,'NAME_B',3,'NAME_C',4,'NAME_D',5,'NAME_B',(my_name_table.LNAME||', '||my_name_talbe.FNAME)) AS Name
from my_name_table
WHERE my_main_table.NAME_ID = my_name_table.NAME_ID(+)
This will all break if any of your static LOV ID values clash with your dynamic LOV ID values.
I am now going to give you a long lecture about hard coding values ..... ;)
Related info: http://simonhunt.blogspot.com/2009/02/how-to-cope-with-list-of-values-lovs.html
I hope that helps
Shunt

Static Tables Creation In oracle & Diff Between Static table ,Dynamic table

Static Tables Creation In oracle & Diff Between Static table ,Dynamic table

972471 wrote:
Static Tables Creation In oracle & Diff Between Static table ,Dynamic tableAll tables in a well designed application should be static tables.
Whilst it's possible to execute dynamic code and therefore create tables dynamically at run time, this is considered poor design and should be avoided in 99.99% of cases... though for some reason some people still think they need to do this, and it's never really justified.
So what issue are you facing that you need to even bother considering dynamic tables?

[svn:osmf:] 10587: Modified the Akamai Plugin Sample app: 1) Added the new MAST plugin; 2) Added support to load the plugins as static or dynamic

Revision: 10587
Author:   [email protected]
Date:     2009-09-24 18:42:35 -0700 (Thu, 24 Sep 2009)
Log Message:
Modified the Akamai Plugin Sample app: 1) Added the new MAST plugin; 2) Added support to load the plugins as static or dynamic
Modified Paths:
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/.actionScriptProperties
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/.project
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/src/AkamaiPluginSample.css
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/src/AkamaiPluginSample.mxml

Revision: 10587
Author:   [email protected]
Date:     2009-09-24 18:42:35 -0700 (Thu, 24 Sep 2009)
Log Message:
Modified the Akamai Plugin Sample app: 1) Added the new MAST plugin; 2) Added support to load the plugins as static or dynamic
Modified Paths:
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/.actionScriptProperties
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/.project
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/src/AkamaiPluginSample.css
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/src/AkamaiPluginSample.mxml

Static or Dynamic IP Address

My remote users are using DSL to get out to the internet. However, all computers are setup with the private IP address. Is there a way to find out if the public IP address is static or dynamic?
Thanks.
Diane

Diane
It would help to know how your users PCs are connected. Are they connected to some router which is connected to the DSL? Or are the PCs connected directly to the DSL?
Most consumer oriented DSL uses dynamic addresses but there are business oriented DSL which use static addresses. It will take more investigation (and more knowledge of your environment) to figure out whether the DSL addressing is static or dynamic.
HTH
Rick

ERROR OGG-01201 Error reported by MGR : No available dynamic port entries

Dear All,
I have configured Golden Gate for MySQL on Linux machine.
All my extracts and replicats were running fine but suddenly the initial load extract have started trowing this error:
*2013-02-25 14:30:08 ERROR OGG-01201 Error reported by MGR : No available dynamic port entries.*
*2013-02-25 14:30:08 ERROR OGG-01668 PROCESS ABENDING.*
This is the same configuration that was working fine for many days:
GGSCI>ADD EXTRACT exp1, SOURCEISTABLE
GGSCI>INFO EXTRACT *, TASKS
GGSCI>edit params exp1
EXTRACT exp1
SOURCEDB db@localhost:3306, USERID "******", PASSWORD "******"
RMTHOST 10.168.20.31, MGRPORT 7809
RMTTASK REPLICAT, GROUP imp1
TABLE netfors.edr;
--on 31
GGSCI>ADD REPLICAT imp1, SPECIALRUN
GGSCI>edit params imp1
replicat imp1
USERID user, PASSWORD password
SOURCEDEFS /u01/app/oracle/oradata/GG/dirdef/edr.def
DISCARDFILE /u01/app/oracle/oradata/GG/dirrpt/imp1.dsc, PURGE
HANDLECOLLISIONS
MAP "db.edr", TARGET db.SDR_TBLICPRAWEDR, COLMAP (usedefaults,
ICPRE_RAWEDRID=seqno,
ICPRE_SENDER=sender,
ICPRE_RECEIVER=receiver,
ICPRE_ICCARRIERID=incoming,
ICPRE_OGCARRIERID=outgoing,
ICPRE_QUEUE=queue,
NE_ELEMENTID=18,
ICPRE_CREATETIME=createtime,
ICPRE_TIMEOFDAYBEGIN=timeofdaybegin,
ICPRE_TIMEOFDAYEND=timeofdayend,
ICPRE_UPDATETIME=updatetime,
ICPRE_STATE=state,
ICPRE_MODE=mode,
ICPRE_BATCHID=batchid,
ICPRE_REFERENCE=reference,
ICPRE_MSG_REFERENCE=msg_reference,
ICPRE_SEGMENT=segment,
ICPRE_CSMSID=csmsid,
ICPRE_GMSC=gmsc,
ICPRE_IMSI=imsi,
ICPRE_SMPP_MESSAGE_ID=smpp_message_id,
ICPRE_RETRIES=retries,
ICPRE_ELOCATION=elocation,
ICPRE_ECODE1=ecode1,
ICPRE_ECODE2=ecode2,
ICPRE_FLAGS=flags);
Kindly help to resolve this issue.
Thanks, Imran

Thanks for your reply and time Kamal.
When i run :
GGSCI (smsc.etisalcom.net) 1> send mgr getportinfo detail
returns
Sending GETPORTINFO, request to MANAGER ...
No Dynamic Ports In Use or Configured
But I have tried with
DYNAMICPORTLIST 7809,7810,7811 7812-7850
But error message was the same.
Current settings for the mgr
GGSCI>edit params mgr
PORT 7813
Regards, Imran

What does mean You can include static and dynamic tables into a Smart Form?

Hi guys,
If you check the official documentation for Smart forms in the Internet you will read that the initial pharagraphs of the text tell you "Tables - You can include static and dynamic tables into a Smart Form. Dynamic tables enable you to display tables whose size is determined only at the moment of their output by the number of the table items to be displayed". The link is the following: http://help.sap.com/saphelp_nw04/helpdata/en/a5/de6838abce021ae10000009b38f842/frameset.htm
I was wondering if this means that I can use field symbols with dynamical number of columns to print a smart form. Because it would be great since the customer wanted a dynamical report depending on the week day it was (If Monday, there was only 12 columns, but if Friday, it will be 52 columns (1 column more for every day elapsed in the current week)). I had to create 5 different forms, but I think using field symbols I had spent less effort. Do you know if it is really possible? If not, then what does mean "You can include static and dynamic tables into a Smart Form"?
Thank you in advance

Hi ,
The concept of static and dynamic tables in smartforms, means you can use template- ( static table as no of rows and columns is fixed). Also you can use table- dynamic as the no of rows will depend on your line items.
Hope this will help you to close this thread.
Also, try to find this answer in posted forums. Creating a new forum everytime just increases the network traffic. So please try to avoid it.
Regards,
Vinit

Static or Dynamic

I have residential Verizon Fios. What type of IP address do I have? Static or Dynamic? According to IP lookup I have a Static IP. This has just happened over the last day or so. While logged into my Actiontec router I noticed three Connections, 192.168.1.1 router, 192.168.1.2 This one is a REMOTE Connection, 192.168.1.6 is my PC. I think I'm having problems with someone hacking my account. Any thoughts would be helpful.

There is the public IP and the Internal IP Addresses.
For the public IP, unless you are on Business grade - then you are using Pure DHCP OR PPPoE DHCP.
For the Internal IP Addresses, they can either be DHCP (Dynamic) or Static.
If you have a Static Internal IP Address as shown in the router's screen, then that internal IP Address is used for some sort of server. This can be a print server or a web server.
Someone might be trying to a run a server behind your router and allow users from the Internet to connect to that server (called portforwarding).
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Static vs dynamic CAM entries

Similar Messages

Maybe you are looking for