Static wallpaper cropping problem in 3.2.1
My K1 upgraded to 3.2.1 recently, and it worked very well in last few days, until I found the first problem. When I change the static wallpaper, the wallpaper is cropped and shrinked instead of filling up the full screen. Can't find any setting. Anyone has a resolution?
I've tried just about everyone just to see how they looked. No cropping here. They all look normal.
Thanks,
Ricochet
The K1_Was Just A Broken Promise Lenovo
Similar Messages
-
My system equals:
Lightroom version: 4.0 Beta [800002]
Operating system: Windows 7 Ultimate Edition
Version: 6.1 [7600]
Application architecture: x64
System architecture: x64
Physical processor count: 4
Processor speed: 2.4 GHz
Built-in memory: 8191.0 MB
Real memory available to Lightroom: 8191.0 MB
Real memory used by Lightroom: 590.0 MB (7.2%)
Virtual memory used by Lightroom: 543.2 MB
Memory cache size: 1083.2 MB
System DPI setting: 96 DPI
Desktop composition enabled: Yes
Displays: 1) 1920x1080
While in video, using captured frame – my picture is extracted at 19 20 x 10 80.
Attempting to use this picture in the books module causes resolution problems yet the same picture when used in the print module and save to a picture file causes no resolution problems and becomes 255 0 x 3300 when using it in the book module.
Multiple Cropping problems have been reported already and I have read tech support is looking at some of these problems - hopefully they will fix the following
In crop the custom dimension will not exceed 5 changes (would like to be able to see it built out to 10 custom sizes) and it no longer overwrites the last dimension change. It defaults to 2×3/4×6
NOT WORKING like LTRM 3Some thing here might help:
iMovie 11 tutorials:
http://help.apple.com/imovie/
http://www.apple.com/ilife/tutorials/#imovie
and also these:
http://www.kenstone.net/fcp_homepage/imovie_09_stone.html
http://www.kenstone.net/fcp_homepage/imovie_09_stone.html#interface -
Page cropping problem in Acrobat XI
I have a title built in InDesign that I export in PDF for the printer. I discovered over successive runs that I needed to shift the y axis a tad and widen the gutter to get the best production results. Here is the routine for doing so in Acrobat Pro IX:
in Acrobat
Document /Crop Pages / Change Page Size / Custom: width 6 in; height 9 in. [ set for each operation ]
Adjust y-axis (height) of text block
Y offset: - 0.15 (check shift visually)
Page range = all
apply to: odd and even pages
Adjust recto x-axis placement
X offset: + 0.13 (check shift visually)
Page range = all
apply to: odd pages only
Adjust verso x-axis placement
X offset: - 0.13 (check shift visually)
Page range = all
apply to: even pages only
I had to produce an new PDF body file for the first time since switching to CC (Acrobat XI), and when I finally found the page cropping dialogue, the above routine blew up the book completely. There wasn't a single character visible in 300+ pages. I take it that Acrobat XI has different ideas about cropping pages, but I couldn't see where the problem lies. The dialogue boxes look the same. The commands are the same. Only the results are different. ??
Any help much appreciated.
Richard Hurley
Grass Valley MultiMediaThis usually means the file is corrupt, probably because it was not created
using a standard application like Adobe Acrobat. -
Static/Dynamic PDF problem with Forms 7.0
Hi all
I wonder if anyone has an answer to this?
I'm having problems with getting the instance manager to work correct in a couple of forms. It works great if I preview in Designer (8.1) or render through ES 8.2, but since we haven't upgraded our production environments yet, I'm stuck with Forms 7.0 there. And when I try to render with that, the form is simply not working as it should...
My guess is that Forms 7.0 chooses to make the form static instead of dynamic, but how to change this behaviour from the xdp? I've checked all the options of making it a dynamic xdp via Forms->Properties and checked just about everything I can come up with, but it's simply not working right now... anyone with ideas?
What I'm trying to do is to hide subforms depending on what the user has chosen in a different form (html), so that the user won't see irrelevant data. It's been done before but now it seems like Forms 7.0 wants to run the forms static always.
I've contacted Adobe support for a week ago but still haven't got anything from them leading me the right way. That's the reason I'm now asking here if anyone has any good idea...
A bit more information about what I've tried:
When I set min instances to 1, they are all visible but then they don't hide.
If I don't set minimum instances to 1, they don't display at all in forms 7.0 when choice Repeat subform for each item is set.
Using initialCount set to 1 do no good.
Doesn't matter if I use setInstances, addInstance or removeInstance as far as I've been able to see. I have also tried using presence = "hidden"; but with no luck.
If the prefill xml file is using appropriate xml syntax, it shows correct number of subforms but since I also wants to hide irrelevant subforms, it's not an acceptable solution.
Thanks in advance for any tips.Yes. I could add an "Of course" but it has happened before that it's something that simple. Been scratching my head for at least 4 hours just today and at least the same amount of hours before so I think I've narrowed out all the simple stuff but I might have missed one..
Any more tips? One strange issue is the fact that the form behaves different if the prefill xml file is structured in different ways. Nothing to do with prefilling, just how the PDF itself behaves. -
SG200-8 Static mac address problem
Hi!
My second problem with sg200-08 (firmware: SG200-08x_FW_1.0.6.2.stk) is when I try to add specific MAC address as secure:
MAC Address Tables - Static Addresses - Add; insert vlan id, port, mac address and select "Secure":
I get error message: "Error: Failed to Add 'Static Address' entry.
Again, thanks for reply!
Best regards,
Boris Bahes.Moritz Lipfert wrote:I have the same problem using the current firmware 1.0.6.2. But even an upgrade by TFTP followed by a factory reset does not help. A downgrade to firmware 1.0.5.1 also does not fix this issue.Are there any other suggestions?
Strange as it may sound, try playing with compatibility mode in Internet Explorer. I have found that these switches interface respond well only in IE. -
Hi can anyone help, Crop problems in Lightroom
Whenever I work on a raw file in Lightroom 5 then open in CS5 for final tweaks the crops I made in Lightroom are not carried over into photoshop
although all other corrections are. Am I doing something wrong! I work on a Mac and all software is up to dateRafael Aviles wrote:
Jim, when opening a raw file from LR into PS, there is no dialog offering the choice of "a Copy with LR adjustments". I believe those options are only for non-raw files.
I tried to replicate the OP's problem, but when I edit a raw file in PS after cropping and lens correcting (upright) in LR, the file opens fine in PS, with the crop and the upright showing up fine. I do have PS CC 2014, though, that's why I wondered if CS5 is capable of handling lens profile corrections. The OP stated that is just the Upright correction that does not carry over, not the crop.
The reason you don't see the dialogue offering the choice is because you are using CC, and everything between Photoshop and Lightroom is in sync. However, the OP is using Photoshop CS5 with Lightroom 5, and should be seeing that dialogue unless they have chosen the option not to ask again. Then Lightroom will simply make the choice that has been made. When Photoshop and Lightroom are not in sync that dialogue should display, even (maybe especially) for raw files. This response is sort of after-the-fact because it looks like the issue has been cleared up. -
Using static include directove problem in ONE web server 6.1
Hi,
I am using sun ONE web server 6.1 to serve jsp pages with custom tags.
All the jsp includes used are static (@include).
I have card.jsp that includes common.jsp and specific_page.jsp.
specific_page.jsp includes generic_page_header.jsp.
common.jsp has the taglib directive.
specific_page.jsp and generic_page_header.jsp use custom tags defined in the taglib directive.
It appears that the custom tags in specific_page.jsp are parsed without a problem, but the custom tags in generic_page_header.jsp generate the following exception: WEB4105: End of content reached while more parsing required: tag nesting error?
When I manually pasted the code from generic_page_header.jsp into specific_page.jsp the page was parsed successfully.
Can anyone help with this problem?
Thanks,
OdedHi,
I am using sun ONE web server 6.1 to serve jsp pages with custom tags.
All the jsp includes used are static (@include).
I have card.jsp that includes common.jsp and specific_page.jsp.
specific_page.jsp includes generic_page_header.jsp.
common.jsp has the taglib directive.
specific_page.jsp and generic_page_header.jsp use custom tags defined in the taglib directive.
It appears that the custom tags in specific_page.jsp are parsed without a problem, but the custom tags in generic_page_header.jsp generate the following exception: WEB4105: End of content reached while more parsing required: tag nesting error?
When I manually pasted the code from generic_page_header.jsp into specific_page.jsp the page was parsed successfully.
Can anyone help with this problem?
Thanks,
Oded -
IMovie and photo cropping problems!!
Hello!
I am making a slideshow for my Grandpa's memorial service, and have many photos where I have placed a title directly on the picture so that they are clear to people watching (year, people in it, etc.)
Here's the problem:
iMovie crops every photo so that in many cases, the titles I placed on the pictures aren't visible!
BTW - the KB effect is turned off, and all photos were imported without the effect.
I have played around with placing the photos on different sized canvasses to see, when imported, which dimensions come the closest to fitting correctly on the iMovie screen. It seems like putting the photo on a 6.5"x4" canvas works best to deal with portraits (gets the whole top and bottom in, leaving black lines on the sides), but I'm wondering if anyone has more definitive information about what size photo can be imported without being cropped. I've got 200 pics to deal with, and if I'm going to resize all of the canvasses, I only want to do it once!!!
Thx in advance for your help!Hi, Ben
I didn't get your response until after I had played around with the pics some more.
Brilliant minds think alike, though, and I ended up doing basically what you did, using a 1920x1440 canvas (can't remember the inches, and no access to it on this computer).
Just for the record, even with the KB effect turned off, the settings were cropping the photos a little bit because of it (the default import setting for the KB effect was at 1.16, and even with the KB effect off, it was still affecting the photos). When I changed that setting to 1.0, it did make a difference, but putting the photos on a blank canvas and resaving them was really what worked!
Sorry everyone who replied - I tried to give you "helpfuls" and a "solved" for Ben, but my computer keeps giving me an error message!!!
Message was edited by: jen.huffman -
Problem creating a slideshow in iDVD 6.0.
I added a white border to each of the image files that I wish to use in my slideshow. However, when I try to preview the slideshow, some of the images do not show the full border, very often cropping the bottom border completely. I've tried reducing the size of the images, but this doesn't solve the problem. I've also selected and deselected the "Always Scale Slides to TV Safe Area" but the problem remains. Very often, images with identical aspect ratios will show/not show the border correctly. Any input or solutions would be appreciated.
Thanks...
Mac Mini Mac OS X (10.4.6)To expect every photo to conform to a ratio of 4:3 would be unrealistic.
Sorry, but that is the way iDVD works!
'Standard' TV (and iDVD is designed to produce TV content) uses a 4:3 aspect ratio. (With iDVD 6, you may also create a 16:9 project.)
See Preparing images for DVD slideshows at http://docs.info.apple.com/article.html?path=iDVD/6.0/en/17.html -
Cropping Problem: Image break-up
Hi
So far, I am quite impressed with CS6--the more I use it the better it gets. However, I am running into an ongoing issue with cropping. It mainly occurs with stitched panoramas, and happens whether I use RAW, tiffs or jpegs. Once the image is stitched and the layers merged, the crop tool is selected. As soon as any action is initiated, the image breaks up (see below). As soon as I ok the action (by hitting the check box to crop) all is back to normal, but the break-up of the image makes it very difficult to crop accurately. The problem never occurred with CS5. Any ideas? (Note: the image below was stitched from RAW images processed by LR4, saved as a tiff and then re-opened in CS6.)
StuartThanks. I couldn't really see what value the other information would have been! I use programs, but that's it, and am a bit out of my depth here. And it's been a long day ...
This should be what you want.
Stuart
Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:5, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2660 MHz
Built-in memory: 7990 MB
Free memory: 5604 MB
Memory available to Photoshop: 7051 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
Photoshop crashed on 6/04/2012 at 11:49:37 AM (GetImageViewResourceSharingGLContext)
The GPU Sniffer crashed on 23/04/2012 at 2:02:18 PM
OpenGL Drawing: Disabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: ATI Mobility Radeon HD 6550
Display: 2
Display Bounds:= top: 0, left: 1920, bottom: 768, right: 3286
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1200, right: 1920
Video Card Number: 2
Video Card: Intel(R) HD Graphics
OpenCL Unavailable
Driver Version: 8.771.1.0
Driver Date: 20100909000000.000000-000
Video Card Driver: igdumd64.dll,igd10umd64.dll,igdumdx32,igd10umd32
Video Mode: 1366 x 768 x 4294967296 colors
Video Card Caption: Intel(R) HD Graphics
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Video Card Number: 1
Video Card: ATI Mobility Radeon HD 6550
OpenCL Unavailable
Driver Version: 8.771.1.0
Driver Date: 20100909000000.000000-000
Video Card Driver: atiu9p64.dll,atiuxp64.dll,atiuxp64.dll,atiu9pag,atiuxpag,atiuxpag,atiumdva,atiumd6a.cap,a titmm64.dll
Video Mode: 1920 x 1200 x 4294967296 colors
Video Card Caption: ATI Mobility Radeon HD 6550
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\Stuart\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 567.8G, 79.7G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/01/18-15:07:40 66.492997 66.492997
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/02/09-16:00:02 4.0.93 66.496052
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1642
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 5,0,10,0
AGM.dll AGM 2012/01/18-15:07:40 66.492997 66.492997
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib (64 Bit) 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/01/18-15:07:40 66.492997 66.492997
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/01/18-15:07:40 66.492997 66.492997
BIBUtils.dll BIBUtils 2012/01/18-15:07:40 66.492997 66.492997
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/01/18-15:07:40 66.492997 66.492997
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt42.dll International Components for Unicode 4, 2, 0, 0
icuin42.dll International Components for Unicode 4, 2, 0, 0
icuuc42.dll International Components for Unicode 4, 2, 0, 0
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
onOneToolboxPlus.dll onOne Toolbox2 Dynamic Link Library 2.2.0
ONProxySupport.dll TODO: <Product name> 1.0.0.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
wu3d.dll U3D Writer 9.3.0.113
zlib.dll zlib 1.2.5
Required plug-ins:
3D Studio 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Accented Edges 13.0
Adaptive Wide Angle 13.0
ADM 3.11x01
Angled Strokes 13.0
Average 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Bas Relief 13.0
BMP 13.0
Camera Raw 7.0
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Collada 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Dicom 13.0
Difference Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Embed Watermark 4.0
Entropy 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Extrude 13.0
FastCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Flash 3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Google Earth 4 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Kurtosis 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Maximum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Mean 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Measurement Core 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Median 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Mezzotint 13.0
Minimum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
MMXCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Picture Package Filter 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Pinch 13.0
Pixar 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Range 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.0
Shear 13.0
Skewness 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Standard Deviation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Sumi-e 13.0
Summation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
U3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Underpainting 13.0
Vanishing Point 13.0
Variance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Variations 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
Wavefront|OBJ 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
WIA Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Wind 13.0
Wireless Bitmap 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
ZigZag 13.0
Optional and third party plug-ins:
Perfect Effects Free 3.0.2
Perfect Effects Free Filter 3.0.2
Perfect Effects Free Smart Filter 3.0.2
Plug-ins that failed to load: NONE
Flash:
onOne
Mini Bridge
Kuler
Installed TWAIN devices: NONE -
EJB fails to compile - static inner class problem
I am using OC4J 9.0.4 and Sun JDK1.4.2 and EJBs fail to compile if they reference objects that contain static inner classes. However, they successfully compile under JDK1.4.1.
For example, I have a class like below:
public class ValueObject
public static class Key
private Key key;
private String value;
Any references to ValueObject.Key inside the EJB cause the EJB compiler to generate "ValueObject$Key" which is incorrect. JDK1.4.1 is more lenient than 1.4.2, and allows this error through.
Is there a way around this problem other than reverting to JDK1.4.1?
Regards,
AndyThe reason I don't want to move to JDK 1.4.1 is because of the memory leak in the StringBuffer.toString() method.
Is there anywhere I can submit this as a bug?
Regards,
Andy -
I have to admit that I am a newbie in CS3. Trying to crop a photo, but whenever I move the mouse over the picture, instead of the usual crop symbol, I have a hand. Can't figure out what has changed. I have never had this problem with Photoshop until now.
Any ideas on what's causing this and how I can fix it?John Joslin wrote:
... andif that doesn't fix it, keep tapping it!
Thanks for your answer! I tried it and it's all right. -
CS4 Photoshop cropping problem
Every time I try to crop an image, it automatically crops to .003" square. Rebooted my computer and it still does this. Tried the cropping in CS3 version and works fine. Is there a glitch in CS4? Thanks in advance for any help.
This solution also works when you have similar problems with shape layers.
-
I have encountered a cropping problem in cs4
After cropping a photo in cs4 i have tried hitting the return key as well as edit/crop and then my photo disappears and the image box reduces in size to about 1 inch square with no image. I have expanded the image box but nil photo. This has never happened before. I reloaded cs4 onto my computer but the problem still exists. I have also tried out opening the file from Bridge as well as Photoshop with the same result.
scarpakb wrote:
…working on is 1920 x 2560 pixels with resolution 350 dpi, so it is not a resolution issue…
What I was wondering about was not the resolution of your document, but the value you may have entered in the Crop Tool's Resolution box in the Options Bar of the Crop Tool.
For instance, it's common for users to inadvertently end up with a resolution of 0, 1, or 10000 pixels per inch in that box, which would trigger exactly the consequences you are describing here.
So, let me repeat:
…but I'll make a wild guess:
You have some ungodly value in the resolution box in the Option bar of the Crop Tool. Hit the "Clear" button in that same Options bar and try your crop again. -
Desktop Wallpaper Switching Problems
My computer has been working really great for a long time and now I am having a problem with my desktop wallpaper. Whenever I play a song in iTunes as it switches to the next song it changes my desktop wallpaper to the default for when you install OS X. Is there a fix? I'd like to not have to reinstall the OS, but I can if there isn't an easier way. I am willing to delve into folders and such, so any suggestions are really helpful. Thanks,
Jacob DresdaleSame thing here - my desktop wallpaper settings worked fine. And a couple of hours ago I simply wanted to switch to another wallpaper, but I only keep getting the mac blue background, when I try to use pictures in TIFF format. PNG wallpapers work, though.
Any idea how to solve this? As I really have no idea what could have caused this behavior.
Powerbook G4 Mac OS X (10.4.5)
Maybe you are looking for
-
Stop reader from launching when I create a PDF with PDFWriter
I've been using PDFWriter from an old (licensed) version of Adobe 4.0 in conjunction with AutoCAD and other sotware for several years (the full version is still installed on my machine), but yesterday afternoon, every time I created a PDF using it (a
-
Duplicates are being transfered to Itunes
Whenever I add folders (new MP3 songs) to Itunes music, I get a duplicate of every song that has been imported in the itunes mucis folder on the computer. Plus when I sync with my Itouch with the computer, photos are even being synced in duplicate wh
-
Can't log into Mac App Store from Mac Pro Desktop.
Earlier this evening I logged into the Mac App Store fine from my MacBook Pro and downloaded an app. Now I want to do same from mt Mac Pro desktop. Despite repeated attempts I can't log in. It just sits and cranks. Any recommendations appreciated. OS
-
Never Ending Screens Displayed
I need to know how to get the never ending screens from popping up when I click on "share my screen" desktop. I am sure it is a simple fix, but I can't figure it out.
-
how do i update an ipad