Stationarys look great on Windows and using webmail in a browser.

That is great news. I was afraid it would look weird on Windows, or not show up at all in the viewer, but as several attachments making windows users go berserk at people sending mails from a Mac.
Great work Apple!

hi,
are you sure that the people receiving the mail (therefore the pics) do not have an option in their email client forbidding the display of images ?
Many anti-virus or email clients (even anti-spam tools) are blocking images. This is often used in the Windows world. I send few mails with stationaries including pics to Mac users and that worked perfectly.
I may be wrong but worth checking...
Ciao,
/Phil

Similar Messages

  • I want to use QuickBooks for my very snmall bussinesso the recommendation from my accountant was QuickBooks (Windows). I just do not understand enough to decide whether to buy QuickBooks for Apple or Windows and use it in the Parallels world?

    I want to use QuickBooks for my very small bussiness, the recommendation from my accountant was QuickBooks (Windows). I just do not understand enough to decide whether to buy QuickBooks for Apple or Windows and use it in the Parallels world?

    QuickBooks for Mac has been available again since at least 2004 (Intuit before that had done nothing with it for years). The current version is QB for Mac 2014. It's pretty much the same price no matter where you look.
    The Mac version data is not directly compatible with the Windows version. Sending your data out to your business tax accountant and getting it back in is not at all easy. It's such a pain, our accountant comes here to finalize the books at year end.
    There is still also a lot of Windows features for QB Pro which have never been added to the Mac version. They're all on the higher end side that larger businesses would need. I've never run into anything with the Mac version I couldn't do.
    If your accountant wants ease of data transfer, then you'd be better off purchasing Snow Leopard Server and run that in Parallels. Then run the Windows version of QB in that.

  • Bought photoshop elements 11 last year for windows and using it in my desktop. The desktop is crashed now and not usable. So I bought iMac now. Is it possible to trade over or change the licence into iMac version for a small fee. If not , can I partition

    bought photoshop elements 11 last year for windows and using it in my desktop. The desktop is crashed now and not usable. So I bought iMac now. Is it possible to trade over or change the licence into iMac version for a small fee. If not , can I partition the hard drive of iMac and install windows and also photoshop elements? which is the best alternative ? why?

    A Photoshop Elements license is good for both Mac and Windows so it should be just a matter of downloading the Mac version and using your current serial number to activate it.
    PSE 10, 11 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
    If you have any problem with the activation contact Adobe support using chat... Start Here  If after selecting relevant responses you are unable to find a solution, choose "Still need help? Contact us." and the chat contact option.

  • Typesize too small at screen; am running windows and using godaddy

    typesize too small at screen; am running windows and using godaddy

    See this: <br />
    https://support.mozilla.com/en-US/kb/Page+Zoom

  • There's a black space at the top of my window, and when I open the browser, my home page comes up but the address line is blank. How do I fix this?

    There's a black space at the top of my window, and when I open the browser, my home page comes up but the address line is blank. How do I fix this?

    -> Tap ALT key or press F10 to show the Menu Bar
    -> go to Help Menu -> select "Restart with Add-ons Disabled"
    Firefox will close then it will open up with just basic Firefox. Now do this:
    -> Update ALL your Firefox Plug-ins https://www.mozilla.com/en-US/plugincheck/
    -> go to View Menu -> Zoom -> click "Reset" -> Page Style -> select "Basic Page Style"
    -> go to View Menu -> Toolbars -> select Menu Bar and Navigation ToolBar -> unselect All Unwanted toolbars
    -> go Tools Menu -> Clear Recent History -> '''Time range to clear: select EVERYTHING''' -> click Details (small arrow) button -> place Checkmarks on '''Cookies, Cache, Site Preferences''' -> click "Clear Now"
    -> go to Tools Menu -> Options -> General -> When Firefox starts : select "Show My Home Page" -> Type the address of the website which you want to be your HomePage e.g. http://www.google.com
    -> go to Tools Menu -> Options -> Content -> place Checkmarks on:
    1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
    -> go to Tools Menu -> Options -> Privacy -> History section -> '''Firefox will: select "Use Custom Settings for History"''' -> REMOVE Checkmark from '''"Permanent Private Browsing mode"''' -> place CHECKMARKS on:
    1) Remember my Browsing History 2) Remember Download History 3) Remember Search History 4) Accept Cookies from sites -> select "Exceptions..." button -> Click "Remove All Sites" at the bottom of "Exception - Cookies" window
    4a) Accept Third-party Cookies -> under "Keep Until" select "They Expire"
    -> '''REMOVE CHECKMARK from CLEAR HISTORY WHEN FIREFOX CLOSES'''
    -> '''When using the Location Bar, suggest: select "History and Bookmarks"'''
    -> go to Tools Menu -> Options -> Security -> place Checkmarks on:
    1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
    -> Click OK on Options window
    -> click the Favicon (small drop down menu icon) on Firefox SearchBar (its position is on the Right side of the Address Bar) -> click "Manage Search Engines" -> select all Unwanted Search Engines and click Remove -> click OK
    -> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious Extensions (Add-ons) -> Restart Firefox
    You can enable your Known & Trustworthy Add-ons later. Check and tell if its working.

  • Images look great in viewer and terrible in canvas

    I made some map animations in Motion and Keynote. They plook perfect in the Viewer window but terrible in the Canvas window. I have a 480i DV/NTSC timeline. As far as I know, all my settings are correct.
    The problem is that colors look blocky in the canvas window. Is there any way to get the Canvas window to display images as cleanly as they are displayed in the Viewer window of FCP7?
    Is there anything I should do to these images in Photoshop to prep them for FCP?
    Thanks very much in advance,
    - Nick
    Message was edited by: Nicholas Natteau1

    The Viewer just shows whatever you have in its native state.
    Moving the clip or image to the Canvas forces it to display at the resolution and color space of the codec used in the Sequence setting.
    FCP works best with still images that were saved in the TIFF format. PNG will also give good results. You should always use images with a RGB color space.
    The problem is that colors look blocky in the canvas window.
    The images very likely need to be rendered, then they will look much better.
    Consider also that the Canvas always shows a low res proxy. This is less demanding on system resources for real time playback. To see what you really have requires connecting a calibrated, broadcast monitor or at the very least, an excellent TV.
    Is there anything I should do to these images in Photoshop to prep them for FCP?
    Unless you need to zoom and pan the images, open one of Photoshop's Film & Video presets that matches the pixel dimensions of your FCP timeline settings. Paste your images into the preset template and use the transform tools to scale them to the right size.

  • Opening the Canvas window and the Timeline from the browser

    I am on an Intel 2x2.66 Dual Core using OS 10.4.11 and working in FCP 6.04.
    I know this is a stupid question but having been a composer all my life, I am not up to speed on FCP and I seem to be unable to find the answer in my manual.
    I dragged a QuickTime movie to the browser window. It is 500x375 in dimension and uses a H.264, AAC codecs. (info I got from the Get Info window).
    The video shows up and plays in the Viewer window but I cannot get the Canvas window nor the Timeline to open.
    I have tried selecting the sequence from the list in the browser and then control clicking it and looking at the shortcut menu there. The manual says I should choose Open Timeline from this shortcut menu but that is not even a choice I have. I don't mean it is grayed out, I mean there is no Open Timeline choice on the menu.
    As an alternate, the manual suggests selecting the sequence and then choosing View > Sequence in Editor. I tried this also. There is no Sequence in Editor choice under the View menu. There is a Clip in Editor choice but when I select that it simply opens the movie in Quicktime.
    I am aware that I am probably forgetting something simple or doing something stupid but I cannot figure it out. Help would be much appreciated.
    Thomas

    the simple fact that is being eluded to here is that without an active sequence in the project (shown in the browser) there is no canvas or timeline. If you delete your sequence from the browser, the timeline and canvas will disappear, and you will have to create a new sequence, then open that sequence by double clicking it, to get those windows back. Canvas and Timeline display sequence content. No sequence, no c/t.

  • How to run SAP BUSINESS ONE 8.8 clients on windows and use MaxDB on linux/W

    Good day,
    As the subject shows we have SAP BUSINESS ONE 8.8 and I want to find out how to use it in combination with MaxDB instead of MS SQL. I find a lot of MaxDB stuff on the net but no guides on how to setup SAP BUSINESS ONE 8.8 clients on windows workstations and connect them to MaxDB.
    Is this possible and if so how do I go about doing it ?
    Any assistance is greatly appreciated .

    Hi,
    I suggest you to check the supported server for B1 in this link:
    http://service.sap.com/smb/sbo/platforms
    You will know the sap b1 supported platform.
    If you really want to use maxDB on linux/W as B1 server, you can send a development request to SAP AG.
    JimM

  • High Contrast themes on Windows 7&8 overwrites css styles on webpage, how do keep the High Contrast themes setting on window and use the stock CCS?

    This was not a problem for me until Windows 8 now makes it so you HAVE to use high contrast theme to be able to change the background on windows explorer. Otherwise you have to accept it always being white. If there is a windows program that allowed me to change the windows colors like you used to be able to then I would not need to use the high contrast.

    Note I have click on the Firefox button (Tools menu) and then click Options
    Select the Content panel then Click the Colors... button.
    I do have checkbox beside "Allow pages to choose their own colors, instead of my selections above" checked.
    BUT Still
    Windows somehow overrides this. This is bugging the hell out of me. How is it what windows has any control over Firefox's controls anyways?

  • How do you use forward and back button on mouse and use "zoom" in web browser.

    Ok so apparently this forum is ruled with an iron fist or something my very honest and truthful problems with these issues seem to have been instantly deleted in my last discussion?
    I'll try this once more.
    1) How do you use the forward and back button on a mouse without having to buy a product like Steer Mouse? There must be a way to do this without having to buy a program given it's such a useful feature that 99% of users need. I don't want to spend hours researching something that should already work. Any advice?
    2) How do you zoom in for web browsers like Chrome without it globally zooming in everything on the monitor (even background applications). I don't want to zoom in background applications. I want to be able to zoom in the web browser and still maintain all the features like the side bar, not just a little magnifying glass type thing.
    I'm currently zooming in with the CTRL-Middle Mouse button, but I can't find a way to use this feature so it's useful to browse the web it seems to not scale the browser correctly but rather is a global zoom. Any solution for this?

    Thanks so much!
    Like I said I am new to Apple products so it's still unclear to me which programs I do or don't need as I'm setting up and configuring all my software and devices.
    The Logitech Control Center appears to work perfectly for what I was trying to do!
    I accidently clicked "This helped me" instead of "This Solved My Question", sorry about that this was a solve!

  • I want new links to open in main window and not open a new browser or tab. What happened to the "open new links in..." option?

    And when you right click on a link, the only options are "open link in new tab" or "open link in new window". I want to open the link in the same tab, I don't need 16 tabs opened at the same time.

    I fixed this problem. It was pretty easy.
    First, in the address bar, type in " about:config " .
    When it asks if you are sure about making changes & it may void the warranty, click "yes--I promise I'll be careful" or something along those lines. (I heard there is no warranty, & it's just a joke)
    Once you get to the new screen, find " browser.link.open_newwindow "
    You will see the # 3 on the same line. Change that value to 1.
    Wah-la! :)
    http://kb.mozillazine.org/Editing_configuration
    http://kb.mozillazine.org/Browser.link.open_newwindow

  • I have a mac and using firefox as my browser . Yahoo does not load properly. Not having trouble with yahoo using safari.

    WHen I try to open yahoo with firefox it loads extra slow and some of the functions are not available.

    So I just got back from vacation and uninstalled firefox. Reinstalled it and I still have the same problem. The odd thing is now it doesn't work in Google Chrome either. So I'm sure it is a Mac problem now. Probably has nothing to do with FireFox and everything to do with being dumb enough to buy a 4000 $ paperweight called mac. What a hunk of junk.
    Thanks for your help.
    I loved that book to.

  • Why does my page look great in design view and to the left in live view?

    I just created a new page using a fluid grid layout and in "design" view it looks great but in "live" view or on a browser preview the wording all goes to the left.  What I am doing wrong?  I also have another question which may relate to the first.  I  have four templates. Do I create a new named .css file for each new template or continue using the same layout.css file for all templates? Since I created a new .css file for every template maybe it is causing confusion.  Thanks in advance.

    If this is what you want, rework your HTML so all three images are in the same div and adjust your css to  narrow the scroll down image and on Order jpg, vertically align top, 30px margin.
    <div id="header">
    <div id="pic1">
    <img src="Thumbs/Scroll-Down.jpg" alt="More Pictures">
    <img class="goldborder" src="NewImages/englilshivymain.jpg" alt="">
    <a href="#OrderHere2">
    <img alt="Order Here" src="Thumbs/OrderHere.jpg">
    </a>
    <br>
    English Ivy (Detail)
    </div>
    <div id="pic4">

  • My websites look different on a Windows and Mac computers...

    Just wondering why my websites look different on Windows and Macs?? It changes the spacing on the Windows machines so it thoughts off the looks of the site. Any way to fix this?

    Jason Holland wrote:
    Just wondering why my websites look different on Windows and Macs?? It changes the spacing on the Windows machines so it thoughts off the looks of the site. Any way to fix this?
    There are 3rd party apps you can get that can help a bit, but I think the main answer is that if you are using templates and graphic rich features of iWeb, the code it generates is pretty complex, a side effect of making it easy to use. All that code gives wiggle room to different browsers and generations of browsers to reproduce it differently.
    My approach is just to keep things as simple as possible, and start with blank pages rather than templates. Because I keep my pages streamlined, they're universally compatible.

  • SonyAVCHD video looks great in iMovie11 or iDVD7.1.2. When I burn a DVD it's terrible. If I freeze frame I see squares. The picture has poor contrast. I've viewed DVD on my 6-year-old, 24 in. intel 2.16 GHz iMac, and on TV. Help!

    I just bought a very good quality Sony AVCHD camcorder. I also just upgraded my computer from Tiger to Snow Leapord. My iMac is a 6-year-old, 2.16GHz Intel 2 Duo, with a 24 inch screen and 3GB Ram.
    My Sony camcorder HD video looks great in iMovie11 and in iDVD7.1.2., but when I burn a DVD "professional" it looks terrible. If I look at a freeze frame on the DVD I see image made-up of squares. The picture has poor contrast. It looks as bad as poor quality VHS. Do I need to get a new iMac to make this work? Is it possible to make a sharp, clear DVD from AVCHD footage with a 6-year-old iMac like mine?

    That thread helped for a time.  But now it seems as though my computer is back to slow again.  But, some of the jargon is over my head as well.  Not sure I knew quoite everything they were talking about.  But thanks a lot for that, it helped I probably just need to reread it and follow the instructions again.  Thanks so much.

Maybe you are looking for