Statistic report with figures that will not change when rerun months later

Hi,
Is there any good practices that we can follow to create statistic reports with figures that will not change even when rerun after few months later?
My scenario is my statistic report is generated based on data that is "alive" which means the record will get change after a period of time. So, if you generate the statistic report in for January 2006 in the month of January and regenerate in May for the January 2006 statistic, the figure is different. But what I want is to be able to get the same figures.
I know in this case looks like we need some sort of summary tables, so posting this to get advice on the best way to design such summary tables. Please comment if there is other ways of doing it.
Summary tables may work for statistic report, but how to support detail report listing where the records are required to be the same when it was generated few months ago.
Please advise.
Thank you.

What happens, when you execute a report today is the following: a select statement is fired at the data base and the result set is displayed in the report. The data can change after the moment you launched your report. What you could do to keep the result set the same, is implementing a user parameter that fills your date discriminator.

Similar Messages

  • I often get emails with attachments that will not open with my mac. Is there any free software to help this

    I often get emails with attachments that will not open with my mac often a small ? will show. How do I open these

    What kind of attachment? Post an example file name.

  • I am having trouble with songs that will not play completely through.

    I am having trouble with songs that will not finish playback. The songs play about 75% of the way and then stop mid-song. This is true for my PC and songs transferred to my iPod. I have redownloaded (and repaid) for one song to see if that helps, which it did. But that can become expensive as I am starting to find an increasing amount of songs that are haaving this problem.

    Take it to a genius bar. It's probably something with the magnets.

  • Look for a progarm that will let me have 2 moniters but one will lock on and will not change when using spaces

    look for a progarm that will let me have 2 moniters but one will lock on and will not change when using spaces

    ok so i have one moniter to the right of me and i want to keep my google chrome on that one but still be abel to use space on the many monter. cuz when you go to spaces it movies both moniter i hope that help and i hope that you can help me.

  • The display on my iPhone only works vertically.  It will not change when I rotate my phone.

    The display on my iPhone only works vertically.  It will not change when I rotate my phone.

    Swipe up on the bottom of the screen to expose control center and see if the orientation lock is on (top row of controls, far right; looks like a lock with a circular arrow).
    Not all apps support orientation changes, BTW.

  • View only works in one direction,will not change when I turn the phone

    view only works in one direction,will not change when I turn the phone

    Is the rotate lock on?
    http://appletoolbox.com/2013/03/iphone-ipad-or-ipod-screen-will-not-rotate-fix/

  • Phone screen will not change when turned

    Just recently the phone screen will not change direction whn the the phone is rotated. Any ideas?

    Double-tap the Home button to bring up the background applications. Then scroll to the left until you see a gray icon with a circular arrow -- that locks/ unlocks the screen orientation.

  • How do I eject a dvd disk that will not eject when I highlight it and click the eject disk in finder, has anyone had this problem?

    How do I eject a dvd disk that will not eject after I have highlighted it and clicked the eject disk in finder file menu?

    Complements of Kappy:
    Try:
    1. Restart the computer and after the chime press and hold down the 
    left mouse button until the disc ejects.
    2. Press the Eject button on your keyboard.
    3. Click on the Eject button in the menubar.
    4. Press COMMAND-E.
    5. If none of the above work try this: Open the Terminal application in
    your Utilities folder. At the prompt enter or paste the following:
    /usr/bin/drutil eject
    If this fails then try this:
    Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.

  • Drill through report with parameters that user can change

    Hi Team,
    Need to provide user the ability to select the parameters in drill through report.
    But even after changing parameters to different values and click view reports.Its getting reset to the parameter that being passed from main report.
    Is there any way we can override these parameter values in drill through reports so that It can also work as normal report.
    Thanks!

    The user is interfacing with the main report so add the needed subreport parameters to both reports. In the main report, select the subreport > properties > Parameters. add the subreport parameters and set the value to the same parameter in the main
    report by clicking expression builder (fx) and selecting the appropriate parameter.
    "You will find a fortune, though it will not be the one you seek." -
    Blind Seer, O Brother Where Art Thou
    Please Mark posts as answers or helpful so that others may find the fortune they seek.

  • Report with JDBC connection does not work when they includes CommandTable

    I am trying to render using the new version of Crystal report java component - CRJ a report contains Data base Fileds of type Command Table (Row Set) which seems to be not working.
    when i use the previes version of crystal SDK it works fine.
    after deugging the Sample CrystalHelper.java file which contains the method .changeDatasource()
    i found that the DataBaseController.setLocation() method changes the CommandTable class to Table when using it on CommandTable instance and as result all the fields defined into that CommandTable were disappear.

    That appears to be a known issue:  Eclipse JRC: To change the JDBC connection at run time
    Sincerely,
    Ted Ueda

  • HT204266 iPad works except I cannot access anything at the App Store (Also I have 'no service' in the top left corner that will not change even if I switch the airplane mode on/off)

    Recently, my iPad has stopped allowing any functions to be performed in the App Store. I can access but cannot update or acquire any apps.
    The rest of the iPad appears to be working other than the 'no service' in the topleft corner. I tried to change that by switching the airplane mode on/off with no luck.

    Hi wiremaker,
    If you are having issues accessing the App Store, possibly due to the No Service issue, you may find the following articles helpful (the second is aimed at iPhones, but should also apply to cellular iPads):
    Apple Support: Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    iPhone: Troubleshooting No Service
    http://support.apple.com/kb/ts4429
    Regards,
    - Brenden

  • How to make a button on a form that will not appear when printed?

    Hello again!
    I have a rather strange request that I got recently from my employeer regarding a form that we are currently working on:
    We have a form with a Acrobat created button on it that links to an attachment.  She does not want the button to appear when the document is printed.
    Is this even possible??
    Thanks in advance!
    Best Regards,
    Ashley

    You can set the form field to be "Visible but doesn't print" rather than "Visible". This is far easier than the scripting solution.

  • External Hyperlinks Will Not Change after Publishing

    Hi - I'm running the most up to date iWeb and trying to publish external hyperlinks that will not change no matter what I do. They do not overlap, there is no image blocking them, and I have checked and rechecked that they work on iWeb perfectly. I have tried saving each update individually with the inspector, publishing each update individually, re-entering each url then tab or enter - basically everthing suggested on these forums. The site is scullyfilm.com and the external links are to my pages on my squarespace site.
    Any ideas?

    It's very simple to do and it's virtually impossible to do it wrong.
    Here's how I did it.
    Went to Squarespace :
    http://scullyfilm.squarespace.com/
    Right-clicked a link and copied it :
    In iWeb, selected a button and made it a hyperlink. iWeb automagically places the copied link in the URL field :
    Repeated for other 3 links.
    There's currently ONE hyperlink on your page (last updated 20140113) :
    http://scullyfilm.com/scullyfilm/HOME.html
    and it links to :
    http://scullyfilm.com/casting/
    which does not exist.

  • CSA* BDoc Queues that will not dequeue

    Hello,
    I am trying to solve a problem with queues that will NOT dequeue automatically the BDocs in the Q&A environment (dev is OK).
    This is the context:
    NW2004s, Q&A
    CRM 5.0
    BDoc processing
    When I create a new BP, a BDoc is created.
    If I go to the SWM01 transaction, I find my nice BDoc in an "Intermediate (written to qRFC queue)." State. The related queue is named "CSABUPA" + number of BP.
    In order to really process the BDoc and create the IDoc, I must click on the queue's name, verify it's got one tranasaction in, and ACTIVATE it.
    In this way, the BDoc will be processed and I will get the green light!
    If I go to the SQMR transaction, I can see that, in QA, the CSA* queues have a "U" type, whereas, in DEV, they have a "R" type.
    Yet, I don't know (perhaps have no authorization) to change the "U" to "R" type...
    Any clues?
    Thank you very much gentlemen!

    Thank you, that was it.
    I wonder what we developers can do in the end, always have to ask Administrators to do stuff

  • Synaptics touchpad sensitivity will not change

    Under Synaptics device settings, The sensitivity will not change when I adjust the sensitivity setting with the slider. Uninstalled Synaptics driver & reinstalled with the latest version. The sensitivity is the same with or without the Synaptics driver installed.  Thanks!

    I've searched I can't find a solution. I thought for sure a driver update would solve it but it didn't. I also noticed that the pressure graph only goes about half way with hard pressure instaed up to the top. Suggestions?

Maybe you are looking for

  • Schedule Lines and Confirmation on Sales orders.

    Hi all, here is a teaser for you to think about and comment. Ok we have a order line for a material that needs to be ordered into stock so we use the Item Cat TAB, this in turmn gives me a schedule line of CB. How ever as we do not use leadtime for m

  • Open a second window from the first one

    Hi, The problem of my application is loosing control when I open the second window, so I know that the problem is the run of the sub VI but I don't find an other possibility to open a second window from the first one knowing that the first sends its

  • Unknown operation calling a Web Service

    I have a problem writting a Web Service client. I've tried with Stubs and Dynamic Proxy but both give me the same error when I call the WS method named 'Saluda' located in class DorsalSEI : Unknown Operation: {urn:Dorsal/wsdl}Saluda at org.WS.server.

  • HT1677 In order to use Yahoo! Mail, please turn Private Browsing off. Please go to Settings » Safari » Private Browsing, and turn it off.

    In order to use Yahoo! Mail, please turn Private Browsing off. Please go to Settings » Safari » Private Browsing, and turn it off. Would this not make my privacy vulnerable?

  • Why cant I sign into facetime

    I have an Ipod touch 4 I cant get facetime to work on it. I just bought it a couple weeks ago, and havent been able to sign in to face time at all The unit let me sign in my user ID and pass word, but on the next page it say "verifying", and then goe