STATISTICAL COST ELEMENT PROBLEM

Hi all,
following is my problem-:
i has craeted a 'Statistical Internal Order' in which i assigned a responsible 'Cost Center' n simultaneously i created a 'Primary cost element' & a 'Statistical cost element' under category 90.
when i m posting a document through T. Code FB50 in which i give above mentioned G.Ls (cost element)& enter the above mentioned 'Statistical internal Order', after hitting the enter button the responsible cost center comes in the cost center column only infront of 'primary cost element' not in front of 'statistical cost element.
my question is why cost center is ot coming infront of statistical cost element n how it will come.
thanks in advance
sandeep

GL Accounts are always assigned to Real Cost elements and not Statistical Cost element.
Further when you hit a Statistical Internal order, the GL Account/Real primary cost element would require a real cost object, hence it is popping up the Cost center assigned in the Statistical Internal order which is correct.
Statistical cost element can't have any Cost center (real) assgined
Edited by: Suraj Ramamurthy on Dec 1, 2008 1:36 PM

Similar Messages

  • Results analysis for POC method with statistical cost element

    Hi,
    We are testing ETO (engineering-to-order) scenario With valuated
    project stock and cost based POC RA method.
    Inventory is updated during external procurement and we have used
    statistical cost elements (Cost element category - 90) for inventory G/L.We want to use a
    Result analysis method which considers this statistical cost elements
    for calculating POC.For this purpose we have implemented SAP Notes
    616960, 616869 and 78420.
    In short, as per SAP note 616869, we created a customer enhancement
    project for customer enhancement 5 of the results analysis (see Note
    H78420). We copied the source code for customer enhancement 5 of the
    correction instructions of note 616869 and then implemented SAP note
    616960 to read the statistical actual costs.
    Then we included the statistical cost as actual costs - Category K in
    OKG4.
    The system is doing POC and revenue in excess of billing calculation
    correctly after taking into consideration the posted statistical cost.
    During settlement of RA (CJ88), system is not giving effect to
    inventory value. On settlement of RA, revenue should be recognized but
    at the sametime the inventory represented by statistical posting should
    be consumed(COS). The system should post a P&L posting which reduces
    the inventory (representing statistical cost) and updates the actual
    costs on settlement.
    In our example, Statistical actual
    posting is of USD 57150, planned revenue USD 100000 and POC is 70.27%.
    Revenue in excess of billing comes to USD 70265.60. Recognisation of
    revenue of USD 70265.60 is not correct as actual consumption is yet to
    happen. The correct posting in FI should be revenue of USD 70265.60
    along with COS of USD 57150.
    Please suggest why on settlement the system is not posting the COS
    along with revenue recognised?
    Thanks,
    BK

    Hi Bijay,
    We are in a similar situation in one project.  Did you get any solution to the problem you posted here? If you can share it, please.
    Regards,
    Gireesh

  • Statistical cost element (Value type 11) line item entry in CJI3

    Dear all
    I am doing WBS settlement to AUC thr CJ88. Suppose actual cost on WBS is 100 rs.
    CJI3 report shows the balance to be settled to AUC. Now It is showing 100 rs balance. I carry out WBS settlement to AUC.
    Even though settlement has taken place to AUC, CJI3 is showing line item entry of 100 rs (Statistical cost element with value type 11).
    This also affects our reporting as in report S_ALR_87013558, because of statistical cost element line item entry, WBS actual cost is showing as (100+100 st'cal)
    Also, I read in sap note 666152 that we can define transaction type as not releavent for account assignment. But i dont see this kind of setting anywhere in transaction type.
    Can we restrict the statistical cost element to not take part in CJI3 (CO reporting)?  How we can avoid statistical CO postings.
    Pls suggest
    Madhusudan Patil

    Hello,
    Statistical postings could be generated, if
    (a) you have 2 co-objects, e.g. cost center and internal order. There is a default rule in the system, that in this case the internal order will be posted real and the cost center statistical
    (b) you have 2 co-objects and one is marked as statistical in the master data. Actual Postings only to statistical co-objects are not possible. You can not settle statistical values, they will stay at the object.
    Please check OSS-message 106968. It explains everything in detail.
    You can modify your report, that it will show only real postings (value type 04), but I wouldn't do it. For me it sounds that you have to check your value flows in general. They look inconsistent, if you do not expect statistical postings.
    Kind regards
    Tapio
    Message was edited by:
            Tapio Reisinger

  • Statistical cost element 90

    Hi,
    Can any one please help me to understand the statistical cost element 90. I have created asset reconciliation account as statistical cost element. I come to know this will help to track the budgeting. But i don't have clear idea.
    Can any one help me undertand what is the purpose and how it functions in tracking the budgetsin CO??
    Regards,
    Deva

    Hi Phaneendra,
    Thank you for your reply. Still i having few more queries. I have created the Internal order as statistical order. Budgeting also done. While creating the PO i have given both AUC and Internal order as account ssignement reference. In this case the cost centre will get update throw cost center from Asset master. The Internal order gets statisticlly updated throw direct assignement in the PO.
    In my understanding the budget will be updated throw inernal order assignemet in the PO. If that is the case what is the statistical cost element role here??
    But in the case of project system we have created the real WBS element and not the statistical WBS. while creating the PO we are giving WBS element as the account assignment and its get updated in the budget. While settlement, value from WBS element will be settled to AUC and then from AUC to main asset.
    Can you please help me to understand the statistical cost element functionality here??? If my above understanding is wrong please excuse me.
    Regards,
    Deva

  • Inventory statistical cost element old data recovery

    Hell experts,
    For material process recently we have created one inventory GL without statistical cost element category 90, now the user asking for the report at controlling side to show the old cost.
    If I activated statistical cost element for the inventory GL i can not get the old cost data in CJI3 & CJI5, is there any way to get  the old cost data. ?

    Hello Muhammad Danish Rizwan,
    You can try to repost the FI document to CO via T-code:OKBA. Please first test un OKBA, if anything
    is OK , then you can real run it.
    Best regards,
    Ronghua Fan

  • Statistical Cost Element / category 90

    Hello all:
    I have create statistical cost element with category 90 .
    I assign one cost center to Asset too.
    Then I do f-90 to acquisition asset already, it really debit my G/L reconciliation (which I have stat cost element =90)
    but which report I can see report total of this stat cost element ? with cost center that I assign in G/L?
    Standard cost actual /plan report (S_ALR_87013611) not show the value of statistical cost element???
    Thanks in advance.
    Best Regards,
    Manthana

    Hi,
    that is right, the S_ALR_87013611 (report 1SIP-001) is only selecting value type 4. You can copy the report 1SIP-001
    and create a customer-defined report  in GRR1. After that, you can add the value type 11 to the column definition
    in GRR2.
    Regards,
    Greta

  • Statistical Cost Elements

    Hello
    How can we create statsical cost elements for Incventory balance sheet items with 90 Category.
    Help wud be appreciated.

    Hallo,
    The same have to maintained through asset configuration.
    1st you set the bs g/l as asset reco a/c
    2nd you set the same to t/code AO90 in any Account determ. area, where not available any existing g/l & it should be maintained in the area of acquistion a/c assigment
    3rd you check the t/code OAMK wheter the g/l are available.
    4th you can create statistical cost element through FS00 or KA01.
    5th after cretation of cost element, you can set a normal g/l. i.e withdraw the reco a/c from Fs00 & setting change from AO90.
    But the same will be happend only for new g/l with balance.
    rgd
    avijit

  • Statistical Cost Centre problem

    Hello All,
    I have created project in PS (WBS structure). In WBS Basic data tab, I am assigning a Cost Centre.( This Cost Centre will be statistical, as the posting will be done against WBS.
    However when i am doing posting againts WBS thru FB50, the actual cost gets posted against WBS. But it is not appearing as Statistical cost against the cost centre in report S_ALR_87013611. However when I maintain a Cost Centre during posting in FB50 along with WBS, the cost appears as statistical cost. Is it a standard behaviour ? or is it possible by some settings to see the statistical postings against CC, even if i am not mentioning it in FB50 and just maintaning it in basic data of WBS?
    Please let me know.Thanks in advance.
    Thanks
    Sarang

    Hello,
    The way it works is opposite of how you want to use. In the WBS element control tab, you can mark a WBS element as statistical, which means that the WBS element is statistical and choose to post the actual costs to a cost center, which you can enter in the master data. When you post FB50 the WBS will be statistical and cost center will be real.
    If you do not mark WBS as statistical then the cost center field in the control tab has no meaning. For a non-statistical WBS when you use in FB50 the actual costs go to WBS and the statistical costs go to cost center, if you enter it.
    Regards
    Sharabh

  • COPA cost base same cond. map to NET Sales different cost elements problem

    Hi Guru,
    I have the following issue:
    I mapped ONE billing condition type assigned to ONE value field.  ZPCD is assigned to value field VV110 (net sales)
    That one condition type can post to 2 different cost element based on the account assignment group of the item
    One cost element is set up and revenue type 11 and the value is posted to COPA value field NET SALES
    The other cost element is set up as cost type 1 and the posting to COPA is blank i.e. no posting to value field NET SALES
    In both cases a COPA document is created i.e. total 2 COPA documents one for each posting.
    What is the problem??
    Thanks
    Linda

    For the purchased products, you may perhaps use the condition type VPRS to bring in the  material price from the material master.

  • Statistical cost element

    hi all,
    What are the characteristics of a cost element in the following cases ?
    If I have an account without cost element I don't need to make my postings in a cost center in a FB60.
    If I have an account with a cost element with category 01 I will need to make my postings in a cost center.
    What happens with a cost element with 11 category (statistical)? Do I have to give a cost center ? Is it possible to bypass the cost center in this case ?
    Thanks in advance
    Pascal

    Cost Elements with category 11 are basically "Revenue Elements". These basically hold Revenue.
    Since Revenues cannot (normally) be posted to a Cost Centre, the system does not expect a CCtr when you post to type "11".
    But please note, this is not a "Cost". It is treated as "Revenue".
    Cheers.

  • Statistical Cost Element for B/S accounts related to inventory - HELP

    Dear Gurus,
    I need to create a CE type 90 for my inventory accounts. In SAP help it says
    "System Response
    Balance sheet accounts cannot be created as cost elements in cost accounting, except for:
    Asset reconciliation accounts
    Material stock accounts for valuated sales order stock for sales orders or projects."
    For assets tcode OAK7 can be used after maintaining relevant accounts in AA -> Integration w/GL -> Assign G/L accounts.
    How do I do the same for material stock accounts (which are B/S as well)?
    Thank you in advance!
    Ciao!
    Max

    Hi,
    In SAP the cost element category is pre set to 90 for all Balance Sheet Accounts.
    Hence you cannot create cost element with category 90 for any Balance Sheet account.
    Award points if found useful.
    Regards,
    Satish Pasumarthi

  • How to reconstruct the statistical cost of project stock?

    Hi, Experts,
    We added the statistical cost element of 90 category for project stock BS account.
    Now we find that some of the project stock don't have statistical cost,
    some of the project stock have statistical cost(Value type: WRTTP=11).
    How can we reconstruct the statistical cost of project stock to make it right?
    Thanks a lot in advance.
    Best Regards,
    Nansen

    Try running CJEN for your project. Make sure you remove the test run tick.
    Regards

  • Settlement to cost center posted for statistical WBS element

    We have the following scenario
    Statistical WBS elements with assigned Cost center posted for actual postings
    Network assigned to statistical WBSE and settlement rule on the same WBSE
    On settlement run CJ88  the network costs are transferred from network to Cost Center posted in the WBSE.
    Issue:
    While analysing the active availability control the assigned value is doubled. This happens only of the networks are settled. System considers the Actual values from network + Statistical value from WBSE to caculate the assigned values.
    Simulation details as under.
    SP-SET-02-3  (wbs element)
        COSS 2011 11 0007101000     0001240704 KOAO D INR                 100.00  INR
        NWA 500000002408 0010
            COSS 2011 04 0007101000     0001240704 KOAO O INR                 100.00- INR   S  -- does not contribute to assigned value
            COSP 2011 04 0007101000     0001240704 COIN D INR                 100.00  INR
            COSP 2011 01 0007101000     0001240704 KPPP D INR                 100.00  INR   M   -- does not contribute to assigned value
    Hence the assigned value gets doubled and eating up the budget.
    Anyone encountered similar issues pls share the possible solutions.

    Hi Mohit
    It is against SCN's rules to post the same discussion thread twice. You have already posted a similar question in the below thread. Please refrain from doing this and close one of the threads.
    Initial balance upload of revenue GL accounts with wbs
    Regards
    Sowmya

  • No costs visible statistical WBS element

    Hi,
    The followin steps are the setup:
    - Project with a statistical WBS element and a network below
    - Create a PO with Account category "Fixed Asset"
    - Fill in a fixed asset, but also a (statistical) WBS element (put fields 'project' and 'network' optional in customizing)
    - execute a MIGO to book costs
    Now when I run the cost report for this project using transaction CJI3 then I do NOT get the costs visible on this statistical WBS element.
    HOWEVER when I do the same steps, but instead of putting a statistical WBS element I put the network (next to the fixed asset) then I do get the costs visible.
    Is this normal or do I have to change something in order to get the costs visible for my statistical WBS element?
    kindest regards
    bert

    It is normal

  • No costs visible for statistical WBS element

    Hi,
    The followin steps are the setup:
    - Project with a statistical WBS element and a network below
    - Create a PO with Account category "Fixed Asset"
    - Fill in a fixed asset, but also a (statistical) WBS element (put field 'project' optional in customizing)
    - execute a MIGO to book costs
    Now when I run the cost report for this project using transaction CJI3 then I do NOT get the costs visible on this statistical WBS element.
    HOWEVER when I do the same steps, but instead of putting a statistical WBS element I put the network (next to the fixed asset) then I do get the costs visible.
    Is this normal or do I have to change something in order to get the costs visible for my statistical WBS element?
    kindest regards
    bert

    Is this necessary?
    Because in the end I want to book these costs as actual costs on my fixed asset...

Maybe you are looking for