Statistical data disappears from companies where LC does not equal GC

Hi experts : )
We have come across an issue which we cannot explain and I was hoping some you might have encountered it before and can help.
We are entering statistical data for payroll and JV cash and debt for example. We recently changed a few companies local currency from EUR to GBP. Since the change whenever statistical data is entered in those companies the values entered disapear after a while. My guess is that it is happening whenever the data collection task is executed. But what is strange is that is it only happening to the non-euro companies.
Any idea anybody what is causing this?
Your help is very much appreciated.
Regards,
Tanja

Thank you very much for your answers : )
The change of currency did take place in period 1/2011 and the BCF was configured as mentioned by Dan. However, we decided against running balance carried forward task in the end for those companies as we had difficulies matching the local currency amounts as converted by the BCT and the local currecy amount coming in from the source system. Instead the opening balances were loaded, but it seems the statistical data was not.
But then again... we already had GBP companies in period 12/2010, but their statistical data is disappearing also even though their BCF was run... Any ideas on this particular case?
Kind regards,
Tanja

Similar Messages

Debugging LCDS Data Management from Flexbuilder3 on Tomcat does not work

I have a sample with Data Management and when i use it on my tomcat it works fine. But i can´t debug it from flexbuilder 3. When i start it from the flexbuilder i get the connection and then i crashed with "No registered fault handler or token responder - throwing an error for destination:"
It is the same tomcat i use to run standalone.
is it a problem with the context.xml?
[SWF] /flexine/dataService_wt2.swf - 1.422.965 bytes after decompression
'cds-consumer-sandwich-null' consumer set destination to 'sandwich'.
Configuration for destination='sandwich':
New DataService for destination: sandwich
DataService.fill() called for destination: sandwich with args: []
'4A853118-F24B-5FE2-BF01-FCDFF6C93161' producer set destination to 'sandwich'.
Creating a new independent data store for destination: sandwich
Adding data service: sandwich to the data store: null initialized: false
Finished validating destination: sandwich loadOnDemand/paged associations: [] sub-types:
data store: null is initialized
'my-rtmp' channel endpoint set to rtmp://localhost:2038
'my-rtmp' channel settings are:
'ds-producer-sandwich' producer sending message '52AF7949-7B16-7C8E-3B87-FCDFF6F8D3A2'
'my-rtmp' channel got connect attempt status. (Object)#0
code = "NetConnection.Connect.Success"
description = "Connection succeeded."
details = (null)
DSMessagingVersion = 1
id = "E35ECC7A-710F-4D9B-A507-330FDD83B283"
level = "status"
objectEncoding = 3
'my-rtmp' channel is connected.
'my-rtmp' channel sending message:
(mx.messaging.messages::CommandMessage)
body=(Object)#0
clientId=(null)
correlationId=""
destination="sandwich"
headers=(Object)#0
messageId="CDC66303-F24B-1E87-4103-FCDFF8211298"
operation="client ping"
timeToLive=0
timestamp=0
'my-rtmp' channel sending message:
(mx.data.messages.DataMessage)
messageId = '52AF7949-7B16-7C8E-3B87-FCDFF6F8D3A2'
operation = fill
destination = sandwich
identity = (null)
body = []
headers = {}
'ds-producer-sandwich' producer connected.
'ds-producer-sandwich' producer acknowledge of 'CDC66303-F24B-1E87-4103-FCDFF8211298'.
'ds-producer-sandwich' producer acknowledge of '52AF7949-7B16-7C8E-3B87-FCDFF6F8D3A2'.
'ds-producer-sandwich' producer fault for '52AF7949-7B16-7C8E-3B87-FCDFF6F8D3A2'.
Dispatching fault event for destination: sandwich
No registered fault handler or token responder - throwing an error for destination: sandwich
[RPC Fault faultString="There was an unhandled failure on the server. javax/transaction/SystemException" faultCode="Server.Processing" faultDetail="null"]
     at mx.data::ConcreteDataService/http://www.adobe.com/2006/flex/mx/internal::dispatchFaultEvent()[C:\depot\flex\branches\enterprise_corfu_b2\frameworks\projects\data\src\mx\data\ConcreteDataService.as:2401]
     at DataListRequestResponder/fault()[C:\depot\flex\branches\enterprise_corfu_b2\frameworks\projects\data\src\mx\data\ConcreteDataService.as:6970]
     at mx.rpc::AsyncRequest/fault()[E:\dev\3.0.x\frameworks\projects\rpc\src\mx\rpc\AsyncRequest.as:103]
     at NetConnectionMessageResponder/statusHandler()[E:\dev\3.0.x\frameworks\projects\rpc\src\mx\messaging\channels\NetConnectionChannel.as:523]
     at mx.messaging::MessageResponder/status()[E:\dev\3.0.x\frameworks\projects\rpc\src\mx\messaging\MessageResponder.as:222]

Here's an update for future victims doing google searches :-)
The issue appears to be related to compiz. When I'm doing basic 2D desktop with metacity everything simply rocks: the machine suspends/resumes with no issues.
When compiz is enabled, there is about 10 second delay after resume, during which the screen is black and you better not touch the keyboard! If I sit and wait for 8-12 seconds, the dark screen goes away GDM login dialog shows up. But if I touch the keyboard or the touchpad, it will either freeze or become exceptionally slow.

Getting error "Cannot create a BACPAC from a file that does not contain exported data." from SqlManagementClient.Dac.ImportAsync

We're trying to import a dacpac to azure via the new SqlManagementClient DacOperations ImportAsync api I get an exception with the error: "Cannot create a BACPAC from a file that does not contain exported data."
This same dacpac imports fine using an alternate but less friendly API from sql server's tooling. We'd like to use the new management SDK instead for various reasons.

Hi Kyle A Wilt,
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

I lost my iPhone recently. It has since disappeared from support profile. Does this suggest that the phone has been restored and synced with another account?

I lost my iPhone recently. It has since disappeared from support profile. Does this suggest that the phone has been restored and synced with another account?

See:
What to do if your Apple ID has been hacked
(Fair disclosure: The Safe Mac is my site, and contains a Donate button, so I may receive compensation for providing links to The Safe Mac. Donations are not required.)

I'm able to transfer iPhotos from Mac to MacPro but data I've added to photos does not transfer. What am I missing? Tried using Thunderbolt, AirDrop, Flash drive with no success.

I'm able to transfer iPhotos from Mac to MacPro but data I've added to photos does not transfer. What am I missing? Tried using Thunderbolt, AirDrop, Flash drive with no success. Do I have to use iCloud for 800 vacation photos or re-enter all the data after transfer?

There is no support for mirroring or syncing iPhoto libraries or Aperture libraries. You can however export partial Aperture libraries on one mac and merge them into other libraries on a second Mac.
To transfer your edited photos open your photolibrary in Aperture and and collect the edited photos in an album. Then select the album and use the command "File export > Album as new library". This will export all edited photos as a new Aperture library. Copy this library to your other Mac and import it with "File < Import > Library to your other photolibrary on that computer (assuming you are having the same Aperture version on both macs). When merging the new library into your Aperture library, opt to keep the newer versions from the imported library. iPhoto 9.5.1 will be able to open these merged Aperture 3.5.1 libraries.

Is there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly?

Greetings everybody,
I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
I just launched a new website where I sell products with certain variations, for example please view this link: http://www.finerribbon.com/aegean-single-face-satin-ribbon.html
On this particular product, the product variants are supposed to work in such a way where:
If you select the value "1/8" from the "Choose Ribbon Width" field
THEN
The only options active and available to choose from in the "Choose Roll Size" field should be: 500 Yds, 20 Yds & Sample Swatch
Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem where all the options are available regardless of the values chosen, basically the above functonality does not work.
I was told that there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly, is this true? Can anyone advise me if there is a solution to this problem? I would sincerely apperciate it.
Thank you very much for your time and help!

Hi...
I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem
At the top of this window you'll see the following:
Apple Support Communities > Mac OS & System Software > Safari > Discussions
This the Safari forum for the Mac OS X.
Better that you post your topic here > Developer Forums: Apple Support Communities
I do see on my iPad what you are rreferring to. But you shoudl get the feedback you need in the developer forum.

Xcode is running from a volume that does not support ownership. Please move Xcode to one that does.

I have Problem, I can't install Xcode 6.1 on my iMac due "Xcode is running from a volume that does not support ownership. Please move Xcode to one that does."
I have two HD partition, First one I use for my Lion OS, and the second I just installed Yosemite since Xcode 6.1 need OS upper than lion.
Here's my HD Info.
Mac HD : Yosemite
Machintosh HD: Lion
I do try to uncheck and check when I install Xcode. Maybe I don't know where should I put Xcode.dmg when I want to install.
Thank you. Sorry bad english.

Run Disk Utility select the volume you are installing Xcode on and look at the bottom of the screen and make sure Owners Enabled: says yes.
Also make sure there are no other versions of Xcode anywhere on your system. If there are delete them all and then do a fresh download and install of Xcode, BTW why are you nor installing from the Mac App Store, where did you get the dmg from?
post back if that does not resolve the issue.
regards

Data streaming between server and client does not complete

Using an ad-hoc app, data streaming between server
and client does not complete as it supposed to be.
The process runs well in solaris 5.8, however under 5.9
we have found the characters stream buffer length limitation
is around 900 to 950 characters (by default we are using 3072
characters).
Example:
- We are transfering HTML file, which will be displayed
in the App client, with buffer=3072, the HTML only displayed / transfered
as xxxxxxxx characters, but with buffer=900 the HTML is displayed properly,
in this case, the only problem that we have is the file transfer will
eventually longer than usual.
- There is another case, where we have to transfer information (data) as stream
to the client. A long data stream will not appear at all in the client.
Any ideas why the change between 5.8 and 5.9 woudl cause problems?
The current app-driver that we are using is compiled using Solaris 5.6,
if possible we would like to have use of a later version, which is compiled using Solaris 5.9, do you think this will probably solve our problem?
Thanks
Paul

Does this have anything to do with Java RMI? or with Java come to think of it?

TS4002 Hello, icloud receive messages from gilly hicks, but does not receive messages from another personal account... this is happening me since one week and i dont know how to solve this.... error in the mail delivery system says not valid IPv4 SMTP err

Hello, icloud receive messages from gilly hicks, but does not receive messages from another personal account... this is happening me since one week and i dont know how to solve this.... error in the mail delivery system says not valid IPv4
SMTP error from remote mail server after RCPT TO:<[email protected]>:
host mx6.me.com.akadns.net [17.158.8.114]: 550 5.7.0 Blocked - see https://support.proofpoint.com/dnsbl-lookup.cgi?ip=184.173.9.56:
[email protected]
i do alse receive from gmail....
please help... what is happening!!!!

Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

How do I remove an entire email account from mail if it does not allow me to click "remove mailbox"?

How do I remove an entire email account from mail if it does not allow me to click "remove mailbox"?

Welcome to the Apple Community.
Unfortunately you can't delete accounts, you also can't change or remove iCloud addresses.

I've found two bugs in iOS 7. 1) declined calls does not appear as missed calls on the lock screen/notification centre. 2) when bluetooth is enabled from control center, it does not connect to an already paired bluetooth device

I've found two bugs in iOS 7:
1) declined calls does not appear as missed calls on the lock screen/notification centre - iOS 7.0.2.
2) when bluetooth is enabled from control center, it does not connect to an already paired bluetooth device automatically - iOS 7.0.

We are all users here, just like you, but you can tell Apple about it by using this link:
Apple - iPhone - Feedback

Error (Data mining): The specified mining structure does not contain a valid model for the current task.

I'm trying to run the Cross validation report on a mining structure that contains just Microsoft Association Rules mining model. In Target Attribute, I've tried:
Actual(Service Description).SE value
Actual([Service Description]).[SE value]
Actual(Service Description)
Actual([Service Description])
just because i don't know what is the exact correct format, but none of them worked, and I always get the following error:
Error (Data mining): The specified mining structure does not contain a valid model for the current task.
the following is my mining model structure

Association rules does not allow for cross-validation
Mark Tabladillo PhD (MVP, SAS Expert; MCT, MCITP, MCAD .NET) http://www.marktab.net

System message 38 from work area ssfcomposer does not exist in va03

Hi,
I created a smartform copy from standard, it is working good for all sales order,but for perticular one sale order it shwing error like
system message 038 from work area ssfcomposer does not exist.
i have long item line in this sale order what can i do please help me.
Regards
KK

If I am not wrong, I guess you are using template/table inside your smartform.. which is causing the error.
I issue could be because of the condition on the text inside the template which might be overlapping the output structure line and column. The issue can be also be because of your table cell.
To trouble shoot place a false condition(like 1 = 2) first on table and if error still occurs then remove condition on table and place it on structure.
I guess, the above answer will help you to close the thread.
Regards,
SaiRam

Sytem message 047 from work area SSFCOMPOSER does not exist

Hi Friends,
When I am trying to see the print preview of a PO I am getting this error msg
"Sytem message 047 from work area SSFCOMPOSER does not exist".
I had checked the forum and the System message was 046, but the error is not solved.
Regards,
Anu.

Wrong forum to post the issue.
VJ

App hung on "waiting"; during update, I lost my wifi connection; now cannot delete to reinstall (no X), syc does not help; itunes store says it is installed and I cannot reinstall; deleting from itunes and synching does not remove "hung app"; HELP

App hung on "waiting"; during update, I lost my wifi connection and the app hung; now cannot delete to reinstall (no X), synching does not help; itunes app store says it is installed, therefore I cannot reinstall; deleting the app from itunes and synching does not reinstall the app on the ipod; the app developers have not helped and told me to check with Apple (which I am doing, since I am past my 90 day tech support). Hoping someone can help with this hung "waiting' app problem.

- First try resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next download the app on the computer and try to sync.
- Last, restore from backup.

Statistical data disappears from companies where LC does not equal GC

Similar Messages

Maybe you are looking for