Statistical delivery date is not updating automatically or by default
When creating the PO delivery date of a item in PO,is picking,but statistical delivery date is not updating automatically or by default. I am not getting this automatically .Its need for vendor evaluation.
Hi,
Check on it:-
Statistical Delivery date vs Confirmed Delivery date
pherasath
Similar Messages
-
Stat. Delivery Date SLFDT not updated in ME21N
Hello.
We have updated SAP from 4.6C to ECC 6.0 and now SLFDT is not filled when creating PO (ME21N).
Not first time and not when delivery date is changed (and not printed).
Does anyone have an idea on where to look/debug? Where in the code is this field updated?
Could there be a userexit/BADI that stop this field to be updated?
Regards,
Allan FindenThe document which are already exist before your changes than it will not report.
becuase the info sturcture updates is not happend for those transaction. -
Day and Date do not update automatically
How do I get the day and date update automatically?
This old thread may help:
http://discussions.apple.com/thread.jspa?threadID=2267940 -
Delivery Output Type not updated automatically in change mode
Hello,
I am dealing with a strange problem.
If i open delivery to change using VL02N then, output type configured for reissue is updated properly and on save ouput type is getting successfully processed also.
Now if i open VL03N and then using change mode button on application toolbar i go to change of delivery, then output type is not getting created. The issue was figured out when i tried to open delivery from shipment and then using change button i tried to change and save delivery....
Expectiing solution from experts.
Thanks
HariHi,
May be this behaviour is due to the application in which you are opening the delivery. When you open the delivery from shipment, check the transaction code in the screen in system status. If it is VL03N, then it is correct. But if it is VT03N, then it is expected that even in change mode, the output is not triggered. Pls check this once.
I tried the same thing in an invoice from where i opened a SO and then went in change mode, and the otuput is getting retriggered.
I hope teh configuration of your output is correct. Ensure that the Multiple Issuing button is ticked on, if you want yoru output type is to be triggered everytime you go in change mode. -
Statistics-Relevant Delivery Date is not copied
Hi,
when i tried to change delivery date of PO at item level , the Statistics-Relevant Delivery Date is not updated automatically with item level delivery date in delivery shedule, but delivery field is updated with item level delivery date .
Can anyone update this query if you have any idea.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Thanks
Ramakrishnaiah Y
Edited by: Alvaro Tejada Galindo on Sep 1, 2008 4:03 PMHi,
Here I checked in me22n with changing delivery date that time Stat.Del.Date is updating automatically in delivery schedule in item level with that same date.
U just check this with the help of ABAPer why this date is not changing.
Thanks,
Sanket. -
How To Prevent The Modification Statistical Delivery Date In PO (Me22n)
Hi,
My Issue is as follows:
While I am creating a PO (Of Type STO ->UB) when I put the Delivery Date for a particular Item in the "ITEM OVERVIEW" Screen and press Enter, the same information is copied into the "ITEM DETAIL" screen under the "DELIVERYSCHEDULE" Tab. Over there I see that the Delivery Date and the Statistical Delivery Date" are same. Now when I save the PO and then go to transaction ME22n for the same PO, if I change the Delivery Date in the "ITEM OVERVIEW" Screen, again the same change is reflected in the "DELIVERYSCHEDULE" Tab, on the hit of ENTER button.
Now what I have to do is to prevent the Statistical Delivery Date from being changed Automatically. That is when I create the PO, the value of "STATISTICAL DATE" then evaluated should remain unchanged throughout (unless changed manually). The reason I need this is because it will help the user to evaluate the performance of the Vendor.
Kindly Advise... as to whether there is a way of doing it through exits or enhancements.
Thanks,
PabloGlad it worked out. As from the statistical date field help:
The system inserts the delivery date into this field in the following
cases:
o You do not enter a statistical delivery date.
o You change the delivery date, have not entered a statistical
delivery date, and the PO or scheduling agreement delivery schedule
has not yet been transmitted to the vendor.
Basically, item delivery date is copied to the statistical date if statistical date is blank (which it is at PO creation).
After creation, the statistical date is changed if the delivery date is changed and the PO has not been printed (outputted).
Regards -
Deactivation date is not updating in Asset Master after retirement (ABAON)
Dear Experts,
Asset Capitalized on: 28.02.2009 and depreciation key used as: LINK-Str.-line from acq.value to zero without interest. Asset Retirement done with revenue (210) on 31.05.2009. We do have depreciation like (01 book depreciation, 15 Tax depreciation, 30 Local GAAP book depreciation). Below is the asset and class:
Asset name: Maruti Baleno
Asset Class: Vehicles
Here my question is after retirement done with the transaction code: ABAON u201CDeactivation onu201D date is not updating automatically in the system, however when am trying to update manually the system showing error like u201CDeactivation not possible. Dep.area 15 has acquisition values.
When am trying to do same transaction with T code: u201CABAVNu201D, the system updating the deactivation date.
Can anybody explain me why the above error happening and why the deactivation date is not updating with t code: ABAON.
Thanks,
Francis.JDear Atif Farooq,
In the AO74 the transaction types (Deactivate fixed asset check box also ticked)
200 Retirement without revenue
210 Retirement with revenue
When am trying to update manually below error appearing in AS02
Deactivation not possible. Dep.area 15 has acquisition values
Message no. AA296
Diagnosis
You cannot deactivate, since acquisition values are still present in depreciation area 15.
Procedure
Deactivation can only be posted by a complete retirement/transfer. The deactivation date is then set automatically.
The above asset procured in the year of 2009 and same has been retired 2009.
Thanks,
Francis J -
Purchase Order Statistical Delivery Date changed automatically
Hi,
In the purchase order, when I go to change the delivery date, the statistical delivery date changed automatically.
I do not want to change the statistical delivery date.
Is there any User Exit or BADI to validate this?
Please suggest the same.
Regards
Amol KhochareHi
Is the delivery date get copied to statistical delivery date ?
For validation, please check BADI - ME_PROCESS_PO_CUST and Method - PROCESS_ITEM
From the interface - IF_PURCHASE_ORDER_ITEM_MM use method GET_SCHEDULES and subsequently from the interface IF_PURCHASE_ORDER_SCHEDULE_MM use method - GET_DATA to get schedule line details.
Let us know, if it helps. -
How to block the Statistical delivery date in purchase order from updation
Hello All,
We have the following requirement from our client.
The client wants to track the delay in delivery of purchase orders raised to vendors. Currently the users, change the delivery date and then process the PO if there are any delays. The client wants to STOP this and track any changes being made.
We created a new screen layout for purchase orders and checked the Statistics relevant delivery date as DISPLAY
However, when we tested the same, the statistical delivery date was changed along with delivery date, when the delivery date was changed in the Purchase order, though the option for statistical delivery date was seen a DISPLAY field only.
Please provide us your suggestions on any other options available.
R's
Manoj.if your client wants to track the delay of a delivery from your vendor, then he has to give the vendor a chance that he can deliver on time. And the usual way to do this is by sending the PO to the vendor.
if you cange the delivery date before output of messagem then your vendor could not even know the original delivery date, so it is not the vendors fault if he cannot meet this date.
if you change the delivery date after output of message , then the statistical delivery date will stay with the old date.
the field is always open to maintain because it is not always the vendor who is reponsible for a delivery date change.
if you want to change the delivery date because you can take the quantity at that date, then it is not the vendors fault, in this case you have to change the statistical delviery date to evaluate the vendors delivery performance against the new date.
And often forgotten in this evaluation process is the warehouse personell that finally posts the goods receipt. if they post it with delay and do not change the goods reeipt date, then the vendor is as well evaluated to bad. -
Statistical Delivery Date not apperaing in the Purchase Order
Hi Gurus,
Recently the statistical delivery date(SDD) in the Purchse order has stopped appearing in the PO.
Earlier it was appearing but since last one month it has stopped appearing.
The field remains blank inspite of sending the message to the vendor & changing the delivery date of the line item.
Is there any Config setting which i am missing.
or is there any SAP Note to be applied.
Thank you
NSdid you change something in your system and process?
using BAPI or userexits, modified standard program? -
Dates in Events do not update automatically
After iPhoto made events out of my photo library during conversion from from iPhoto06, there are often photos from several days in one "event". I can live with that most of the time, but in several instances I split events. Unfortunately, the dates of the original, unsplit event do not update automatically. This often results in a wrong order of events. If, e.g. I take out pictures from August 10th from an event with photo dates August 10th to August 13th, the original event still shows the starting date of August 10th, and orders the event between August 9th and August 11th.
The expected behaviour would be that the starting date of the modified event would change automatically to reflect the changes. This does not occur, and, worse, there is not even a possibility to change those dates manually.
Am I missing something important here, or is this an VERY annoying bug in iPhoto08?I agree - but this is a user forum and we can NOT fix anything - only try to help either follow the correct procedures of (as in this case) identify a work around to use until Apple fixes the problem.
As far as I know the work around of creating a new event form one photo and moving the remaining photos to the new event is the ONLY way arround this problem right now.
Using the work around will accomplish what you need even though it should not be necessary. Complaining about on this forum will not accomplish anything - compalining directly to Apple might -- iPhoto menu ==> Provide iPhoto Feedback.
Larry Nebel
PS - and reading the thread prior to get the work around prior to adding "I have the same problem" would actually be a pretty good idea too! -
HT2513 The date on my dock does not update automatically ? - Ps anybody.
I use MACCBOOK PRO with OS X ver 10.6.8.
I Cal Version 4.0.4 (1395.7)
Sometimes the current date does not update on my ical icon in the dock. After clicking on it the date becomes OK.
I would appreciate if someone has a solution.I solved the problem by uninstalling Glims.
-
Statistical delivery date in Purchase Order
Dear Friends.
Please tell me, how system will display automatically statistical delivery date in PO while creation of PO for the first time? Because some times system will display this and some times it will not display even though i enter all the similar values. Hence i would like to know the conditions that will guide the system to calculate statistical delivery date automatically and display in PO. I checked and tried various options like entering/not entering/altering planned delivery time, GR processing time in material master purchasing view/MRP view and also in info record. Even with all these options i could not find the correct reason for automatic calculation of statistical delivery date in PO. I refered SAP notes 1164767, 14422, 497150 but no use. Hence let me know the correct and right answer to my problem.Hello,
Thanks for the answer. But as i already stated, Note 1164767 did not helped to solve the issue. I wanted to know how system will automaticall calculate and display statistical delivery date in PO? What are the parameters that govern this? What are the input values to calculate automatically statistical delivery date? Normally why this will be same as delivery date in PO? Suppose I want statistical delivery date = Planned delivery time + GR processing time + Purchasing department processing time + Some allowance (Say additional 1 day). For ex: Statistical Delivery date = 10 + 3 + 2 + 1= 16 days from the date of PO. Please tell me how to get this calculated in system automatically?
Thanks in advance for your valuable answer. -
Purchase order statistical delivery date modification
In a purchase order there are statistical delivery dates. Where (and how) can I go to modify how this date is calculated? I would like to change it based on the due date minus a certain amount of days.
All help is appreciated.>
Cameron wrote:
> Where can I change the planned delivery time within the material master?
You can find the field Planned delivery time in the MRP2 view.
>
> How would I determine whether or not we have an info record? If we do have one, how would I use it to change the vendor evaluation data?
You can use t.codes ME13 or ME1L or ME1M to find the info records. In the info record you can find the field Planned delivery time in the purchase view-control box
>
> Is the statistical believer date something I can have entered automatically using my own calculations?
> Check whether the BAPI BAPI_PO_CHANGE would help to change the date based on calculatoins
Regards, -
Vendor Evaluation - Statistical Delivery Date
Hi,
The statistical delivery date is an important field during the calculation of the on-time delivery score. (see note 310666)
After implementing a new support package this field wasn't filled up automatically anymore. Fortunately note 1039344 and 1164767 helped overcome this.
But ... in the meantime purchase orders were created and received without a statistical delivery date.
Which date / or what does sap do when calculating on-time delivery score if there is no statistical delivery date ? Does it take the "delivery date" into account ?
with regardsUse this link http://help.sap.com/search/highlightContent.jsp
http://help.sap.com/printdocu/core/Print46c/EN/data/pdf/MMISVE/MMISVE.pdf
Or find on the SAP help Vendor evaluation white Paper its there.
Edited by: Prashant Prasad on Jul 31, 2009 12:01 PM
Maybe you are looking for
-
My iMAC 8.1 won't boot.
All I get is a grey screen, no Apple, no spinning anything. I've tried booting in safe mode, in single user mode, i've tried every type of reset I could find. Nothing. Only the blank screen. What is wrong. Has my HD failed or is it more serious. Yest
-
Install ECC6 in Windows 2003 server Spanish
opinion about install ECC6 in windows 2003 standar in spanish. thanks.
-
Registry used by itunesdrivers for burning CDs are missing - help!
Hello All. I have just upgraded my itunes from version 6 to the latest, and now it cannot see audio CDs or burn a CD. Everytime I start it up I get this message: +Warning! The registry used by theitunesdrivers for importing and burning CDs and DVDs a
-
IPhotto, my Iphoto is crash and not responding, what to do
My Iphoto is hang and Not Responding when ever i open it, help please???? cheers
-
MacBook pro screen wont turn on mechine turns on but front sleep light is dim
So I was just browsing on chrome on my MacBook pro and suddenly the screen froze and from the top of the screen it started to get dim and came down right to the center of the screen and then another black shade ontop of that came down and stopped in