Statistical key figures

what is the t-code for statistical key figures.in what tables the data will get updated ?plz reply to me.

Will tell you how to maintain SKF in SAP
1) Create new SKF
2) Map Hierarchy to SKF
3) Add new SKF to Assessement Cycle..
1 ) KK01 is
2) Map Hierarchy to SKF
means you need to plan your Cost center with SKF in T-code KP46
3) Add new SKF to Assessment Cycle..
Whenever you are creating Plan Assortment cycle in T-code KSU7, under
receiver tracing factor box, you need to select these options... Rule will
be Variable portions and Variable portion type will be plan
Stati.Keyfigure...etc
Under Receiver Tracing factor tab, you need to select your new SKF.
Regards
Satish

Similar Messages

Program for uploading Statistical Key Figure KK01 Stattistical Values KB31

Hi ,
I need a Program through which we can upload statistical kay figure and statistical key figure values data
any one who worked on this specific requirement please send the coding
Moderator message: this is not your code factory, please do some own research first.
Edited by: Thomas Zloch on Mar 2, 2012

Read [BAPI_ACC_STAT_KEY_FIG_POST|http://www.sdn.sap.com/irj/scn/advancedsearch?query=bapi_acc_stat_key_fig_post] documentation. For a list of such BAPI look at [BAPIs for manual actual posting in Controlling|http://help.sap.com/saphelp_46b/helpdata/pt/34/60afcfae724effe10000009b38f91f/frameset.htm] (or more recent ones) as well as transaction BAPI. Another solution is the [sdn search tool|http://www.sdn.sap.com/irj/scn/advancedsearch?query=kb31+bapi].
[Get back if you have more precise queries|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement].
Regards,
Raymond

How do i create a Statistical Key Figure ?

Hi everybody,
I want to create a statistical key figure ...
How can i proceed ?
Thanks
Rodolphe.

As explained - just enter master data straight into your ZInfoobject in BW
You can use the business content characterisitc for statuistical key figure or define your own
All you are doign is creatinging a partioning chacracteristic to differntiate your key figure in a restricted key figure
ie
create a object called ZTYPE char 2 with master data and text
create a key figure called ZKF with type number
enter master data into ZTYPE via maintain master data on ZTYPE
z01 with text "No of Flights"
enter master data into ZTYPE via maintain master data on ZTYPE
z02 with text "no of miles"
Then design a cube with say
0fiscperiod
0comp_code
0ztype
and
zkf as the key figure
Load a csv file into the cube so we have for example:
0fiscperiod = 003.2008
0comp_code = aa01
0ztype = z01
zkf = 10
0fiscperiod = 003.2008
0comp_code = aa01
0ztype = z02
zkf = 5
The create a query with 2 RKFs - one called "No of Flights" which has zkf and a restriction of 0ztype = z01
and the other RKF which is called "No of Miles" which has a zkf and a restriction of 0ztype = z02
The in your rows have fiscal period and co code
You will then see two columns of No fo Miles and No of Flights
As mentioned before you can add more 0ztypes without having to extend the columns of your cubes (hence the term partioning characteristics) - the same prinicipal as CCA uses in CO - ith actual and plans
phew - hope that explains it all

Fixed value Statistical key Figures based on Profit Centers - 9KE5

Hi all,
We have a Statistical Key Figure that is of Fixed Value category, based on Profit Centers. We are manually entering it in 9KE5.
Since it is of fixed value category, am I right to say that: once we enter in one period, it will automatically be updated in subsequent periods? But the current situation is, it does not update in subsequent periods, only the period which we enter.
Does anyone know how to correct this? So that once it is updated in 1 period, it will be automatically be updated in subsequent periods.
Thanks in advance!

Hi,
Yes, I saw the field and chose 1- Equal distribution.
I then select period 1, enter the quantities and save. Go back to 9KE5 and choose period 2, I expect the quantities entered in period 1 to be reflected in period 2. But this is not the case- there is no value for period 2.
I also managed to change the selection screen to have Period as select-options. If I choose Periods 1 to 12, the quantity I entered in 1 period is divided into 12, and it will only show that divided quantity. However, if I choose another Period, Period 3 for example, no value is shown.
Is this the correct behaviour? I am expecting the quantity entered in period 1 will also be shown in any other period.
Thanks!

Authorization check on technical name for statistical key figures

Dear experts,
I need an authorization check on the technical name for statistical key figures. I would like to avoid that local users can change/modify centrally defined key figures which follow a given naming convention.
I checked the authorization object K_KA03 for statistical key figures but this doesn't help as it only checks controlling area and activity. I also couldn't find the technical name as an authorization field.
What can I do to set up an authorization check on the technical name of the statistical key figure if it is not foreseen in the standard?
Thanks for any ideas,
René

Try something in similar lines as suggested in below link:
https://wiki.sdn.sap.com/wiki/display/PLM/COValidationstoadditionalauthorisations+checks
Regards
Sreenivas

IO settlement and statistical key figures

Hi experts,
Is it possible to make settlement based on statistical key figures (ex: M2) for internal order? as it is possible for the cost center (via cycle) i wondered if there is a way to do it for internal order.... Or the settlement with statistical key figures is only possible via cycle and thus only for CC??
Thanks in advance,
Chris

Hi Chris
This is possible, but in a slightly different way
Settlements cant happen based on SKF.. however, you can use Internal Orders as senders in assessment cycles.. For this refer note Note 605281.... It has a program which will allow you to use IO as senders in assmt cycle along with CC as senders
Then you can allocate from Internal orders based on SKF.. You need to define cycle in KSU1 and execute from KSU5... KO88 wont come into picture
Regards
Ajay M

LIS - Statistical Key figure

Hi Experts,
I am trying to create a statistical key figure with LIS. I have selected info set - Net Sales Value as key figure. system throwing the message
"No currency key figures can be processed at present
Message no. KS306
Diagnosis
You selected a key figure from the LIS describing a currency.
System response
No currency key figures can be processed using the present release.
Procedure
Select a key figure from the LIS that refers to a quantity".
Pl.Help
rajeswari

Hi Rajeswari,
while Link to LIS what are steps you followed
1) Click the Link to LIS, than one pop-up box will appear
2) Select Search by Info Stcture, than Enter
3) Select Related Item for Example 02 Purchasing than Enter
4) Select 012 Purchasing Enter
5) Select EMNG Invoice quantity
Depending the above Sequence you have to Select, Amount will not take the above sequence...

Cca-statistical key figures

Dear all,
I am a bw consultant. i got a development ticket. CCA is already implement in my company. now they want to pull statistical key figure data. i really do nt have any functional knowledge about CCA-STATISTICAL KEY FIGURES. Can some one pls detail step by step pre-requisites to pull the statistical key figure data from cost center accounting. Ur help would be highly regarded and rewarded.
Thanks in advance..
sastry

Hi Sastry,
Statistical Key Figures (SKF) are required to apportion the cost to different cost centers. It works as a basis for apportionment. This is the general concept for using Statistical Key figure.
For e.g. you want to apportion Canteen expenses to different cost centers. This will be done through Distribution/Assessment T.codes. To apportion the cost to different cost centers, you need specify the SKF cost centerwise.
For creation of SKF, T.code is KK01, For display it is KK03
To enter the SKF data in to master, T-code is KP46
For apportion of canteen expenses, you may define SKF as EMPL in the master. After you create (KK01) a master, fill the master data (KP46) with the number of employees in each cost center. System will apportion the canteen expenses with the help of SKF which will be used in your Distribution/Assessment cycles.
To get the figures of various SKFs, you can use T-code S_alr_87013618
Hope this will help you go ahead.
regards,
Makrand

Retractor for Statistical Key Figures Not Sending Values

I have configured the standard retractor for primary costs and stat key figures based on all the documentation. Primary costs retract perfectly. Stat Key Figures do not send over the values.
I have configured UPBR_RETRACT with UPB_RET_STKEYFIG. In the update rules the only thing I have changed is assigned ZRATENU to 0BPS_PRICE and 0QUANTITY to 0BPS_QUANTITY. I copied the delivered planning level 4EXP0004 to a Z level assigned to my custom cube. In UPBR_STRUCT I assigned to the correct structures /1SEM/_YS_CHAS_210ZEXP0004 and /1SEM/_YS_KYFS_210ZEXP0004.
From BPS, when I run the retractor I get the message that "Retraction: Update completed without errors. Number of records:   56". All of this tells me things are running fine. My parameter group is setup as follows:
Retr. R/3 Comp.          6
Retractor Control          3
Delta Update          0
Destination          DE1CLNT209
Test mode Is Active          0
I go over to ECC and look at KP46. The stat key figures by cost center have been transferred but the planned values all show 0. When I go to table COSR, I see 0 in the planned fields.
Has anyone had this issue and do they know how to solve it?
Thanks,
Cherie

Dear Chrie,
Can u explain, what are the keyfigures that are not getting retracted to R/3?
If quantities and Unit of measure is not getting retracted, you will have to apply the note 889634. Check once.
If you are using the function modules UPR_COST_PLAN_INIT and UPR_COST_PLAN_EXECUTE, then make sure that you pass only Object Currency (0AMOCCC) values to it, as it supports only those.
Regards,
Srinivas Kamireddy.

Cost Center: Statistical key figure reports

We have a business content cube 0CCA_C03 and is loaded with data but when we try to use the associated Business content query with the proper parameters it says there is no data available. What could be potential problem and solutions?
Thanks

Hi Atif,
Did the data load succesfully?
e.g in the monitor is the status set to green and the cube is availble for reportong?
Thanks,
Nick.

Problem with statistical key figure for Profit center

Hi all,
In Cost center accounting, I can enter value for SKF per daily with Tcode KB31N. But in Profit center accounting, why cant I enter value for SKF per daily or weekly? How to have data for SKF per daily? what can I do?
Thanks

Hi
SKFs are always entered per month and used per month... What do you wanna achieve by entering them daily?
If you want to execute daily allocation cycles, I believe thats a wastage of time and energy and you increase the no of line items in the table
br, Ajay M

Statistical Progress Key Figures

Hello Community!
I had a problem with the creation of the Statistical Progress Key Figures; in order to perform the progress analysis at (PS) I need to determinate the statistical key figures in which the percentages of completion (POCs) are recorded. This settings are created per controlling area (CO). At the moment to record this key figures an error occur, that the Key figure is incorrect due that the unit of percentage is not defined correctly.
Who can help me with this matter?
What is the best way to define unit of percentage for progress analysis?
Thanks a lot!
Regards,
Manuel Gonzalez

The solution to this case was based on the Percentage Unit of Progress. This unit were created at the Tr. CUNI and regarding the ISO Unit (SAP Note 576981)
With this attributes the Key figure is configured at per Controlling Area and assigned to the Progress Analysis.
The Unit test is correct!
Regards,
Manuel GU

Report Painter - Characteristic cannot be combined with key figures

Hi,
I have added a new field (ZZABTEI) to the report structure CCSS and using that field as a characteristic in the report. But when I execute the report, it is giving the error "Characteristic ZZABTEI cannot be combined with key figures". Can anyone help me to solve this issue.
Thank you,
Rekha

There no code for this. I had to add the new field to CCSS structure. Then there were some configuration to be done. Then this message is got when the report in the report painter is executed. The details of this error message is as follows :
Characteristic ZZABTEI cannot be combined with key figures
Message no. GR410
Diagnosis
Characteristic ZZABTEI is being used in a report with a key figure that does not match this characteristic.
System Response
The system cancels generation.
Procedure
Check the report definition: the key figures used must be compatible with characteristic ZZABTEI. For examples of useful combinations of characteristics and key figures, see the SAP standard reports.
Technical explanation: The Report Writer table assigned to the report is defined as a view with multiple database tables (somewhat similar to Report Writer table CCSS) and a key figure used in the report refers to a database table which does not contain characteristic ZZABTEI.
Example 1 for table CCSS: If the 'cost' or 'quantity' key figures are used in a report (referring to tables COSP and COSS), you cannot use the 'Statistical key figure' (only occurs in table COSR) characteristic in the rows. On the contrary, using the 'Cost element' (tables COSP and COSS) characteristic is not permitted for the 'Statistical quantity' (table COSR) key figure.
Example 2 for table CCSS: If a report only displays line item data (key figures IE... or PE...), you cannot use the 'PERBL' characteristic, because it is only valid for summary data. You have to use the 'PERIO' characteristic for line item data.
Thank you,
Rekha

Multiple key figures in a report painter or writer

I would like to bring GL account balances in the form of a P&L and also bring statistical key figues. I need to perform a formula of dividing the dollar value by the SKF. Is this achievable? The column in the painter does not permit more than one key figure type, currently I have object currency.

Yes it is possible. If I understand your question correctly, I think you want to define statistical key figures within the rows of a report and have their corresponding key figure in the same column as the amounts for the G/L accounts. To do so requires that you create a new section within the report (Edit > Sections > New Sections) which can reference a different key figure than the object currency used by the G/L accounts. In the new section, or in its own section, you can then create a row formula which combines the amounts and key figures.
Best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Applications Regional Implementation Group (RIG)

Statistical Key

Hi
Can anyone tell me what is a statistical key
regards

Hi gayathri,
Adding on to what people have said.
A statistical key figure is a number providing information about non-monetary data relating to organizational units. These are, for example:
·        Employee structure
·        Number of machines
·        Capacity usage
·        Market information
Use
You can use statistical key figures to present additional characteristic information relating to organizational units other than monetary data:
·        Number of employees
·        Square meters or feet (for administration, production, storage, and so on)
·        Number of PCs or telephones
·        Calling units for telephones
·        Market share of a product group
You use statistical key figures in reporting and in allocation:
·        In reporting, besides the key figures that can be represented using monetary values, such as profit-sales ratio (profit/sales) or capital turnover (sales/invested capital), you can use statistical key figures to analyze other typical controlling information, such as:
¡        Sales per employee
¡        Personnel costs per employee
·        In allocation, you use statistical key figures as tracing factors for periodic assessment and distribution. You can distribute the fixed capital in the form of real estate and buildings, for example, to the individual profit centers according to the required number of square meters.
Structure
The master data of a statistical key figure consists of the following:
·        Assignment to controlling area
·        Unit
The unit represents a unit of quantity or time in which the entered quantities or values are posted.
Please assign points and let me know if you need anything specific.
Rgds
manish

Statistical key figures

Similar Messages

Maybe you are looking for