Statistical postings in special ledger

Hi,
I have a question about PA postings in Special ledger.
When I post a FI doc with PA segment (real posting) and cost center (statistical posting) when I display Special ledger line item I can only see the PA segment but not the cost center. The when I post the same FI doc without the PA segment I can display the cost center correctly ( I think that it is because in this case the cost center is the real posting)
Is it possible to display both CO objects, real and statistical?
Thank you very much

Hi Beatriz!
Could you please post how did you manage to get statistical postings on the Special Ledger?
Thanks in advance.

Similar Messages

Block specific FI postings to Special Ledger

Hello,
I have created new summary ledgers in FI-SL. I want to block certain FI document types from being posted to these ledgers. What type of validation is required to accomplish this ?
Your guidance will be greatly appreciated and rewarded as well.
Regards,
Jay

I tried transfering document from FI to SL , on GCU1 screen it says document posted error-free but when I go back in SPL and display all documents for that company code, still that one from FBB1 is not posted.

Special Ledger Roll up: too many records created in receiver table

Hello,
When I execute roll up from 1 special ledger to another special ledger (leaving out a number of fields) 4 records (postings) are selected but in the receiver table there are 92 records created (4*23) so 88 records too many. For each selected record in the sender table 7 records contain only 0 amounts and have an incorrect RPMAX value (starting with 16 till 336). The 8th record has an amount and has the correct RPMAX value: 352). In Sender and Receiver Ledger fiscal year variant Daily Balance is assigned (= each day is a period). Any hint how to prevent the empty records?

Installing the patch, re- importing the SAP Provisioning framework (I selected 'update') and recreating the jobs didn't yield any result.
When examining pass 'ReadABAPRoles' of Job 'AS ABAP - Initial Load' -> tab 'source', there are no scripts used .
After applying the patch we decided anyway to verify the scripts (sap_getRoles, sap_getUserRepositories) in our Identity Center after those of 'Note 1398312 - SAP NW IdM Provisioning Framework for SAP Systems' , and they are different
File size of SAP Provisioning Framework_Folder.mcc of SP3 Patch 0 and Patch 1 are also exactly the same.
Opening file SAP Provisioning Framework_Folder.mcc with Wordpad : searched for 'sap_getRoles' :
<GLOBALSCRIPT>
<SCRIPTREVISIONNUMBER/>
<SCRIPTLASTCHANGE>2009-05-07 08:00:23.54</SCRIPTLASTCHANGE>
<SCRIPTLANGUAGE>JScript</SCRIPTLANGUAGE>
<SCRIPTID>30</SCRIPTID>
<SCRIPTDEFINITION> ... string was too long to copy
paste ... </SCRIPTDEFINITION>
<SCRIPTLOCKDATE/>
<SCRIPTHASH>0940f540423630687449f52159cdb5d9</SCRIPTHASH>
<SCRIPTDESCRIPTION/>
<SCRIPTNAME>sap_getRoles</SCRIPTNAME>
<SCRIPTLOCKSTATE>0</SCRIPTLOCKSTATE>
-> Script last change 2009-05-07 08:00:23.54 -> that's no update !
So I assume the updates mentioned in Note 1398312 aren't included in SP3 Patch 1. Manually replaced the current scripts with those of the note and re- tested : no luck. Same issue.
Thanks again for the help,
Kevin

Managerial postings from parallel ledger to CO

hello experts
my client is using parallel ledger to post some managerial postings (for example, depreciations calculated with diferent approaches), and they want these postings in CO, to consider them in CO assessments.
As parallel legder postings are not considered in CO, do You have a suggestion On how can i make them go to CO?
if i use special ledger instead of general ledger i can make the assessments, but they also wont go to CO, right?
maybe i can make BW read both CO and special ledger assessments.
Do you have any other solutions to share?
kind regards
mayumi

Dos anybody knows what is the result of the application of notes 804753 and 932045?
I mean, I need to make assessments in CO for postings from parallel ledgers, the same way I do to the postings from leading ledgers.
After that, I will treat this information and discard leading ledger postings from some GL accounts.
does anybody has ever worked with this scenario?
kind regards
Mayumi

Special Ledger: Open Line items are not being loaded in BW

Hi all.
We are loading Special Ledger information from R/3 to BW, and for many accounts, the data is not reconciling between the two systems.
We have found out that none of the Open Line Items are being transferred.
Do you know which could be the cause for this?
Thanks and Regards

Hi Daniel,
Could you give some more details about the extractors and the "Open Line Items"?
-Bikas

General Ledger Special Ledger out of balance *URGENT* Material Ledger???

We've activated Material Ledger in a company code in Jan'07.
Accounting document created because of 102 Movement type FI document looks fine but in Special Ledger document dollars against Group currency are posted to Price Difference account? This is not happening for all 102movement type documents but i couldn't establish the pattern! Any help would be highly appreciated.
Some background:
Company code and Controlling Area both got USD as main currency.
This problem is sporadic and with 102 movement type only.
Materials causing issue got Price control 'S' and Price determination '2"

Hi Raghu,
Probably I am mistaken; I was talking about SPL field movements and user exits used there. you can check that through transaction GCB2 where ledger is assigned to a company code and then u can drill down to activity and field movement assigned to the activity and can find if a user exit is used to post to a price difference account.
Let me know if I am talking about relevant stuff here. If it is with SPL then I can help u more.
Thanks,
Kumar

Go live of a new special ledger

Hi,
I need to implement a special ledger, and the company FI is already in production. The problem is that I need to start to work with the special ledger on the date 01.01.20XX, and if I pass the orders on 01.01.20XX the company is still going to enter information (adjustments) in 12.20xx -1 and I don't want to have information of the prior year in the special ledger.
I want to know if is possible to set the special ledger to be actived in a specific date.
In addition, which is the process of the go live recommended by sap to start to use a new special ledger when the company is already in production.
Thanks,
Cecilia

Walk into an Apple Store or call the online Apple Store. The sales staff will be more than happy to help you with your concerns and help you make your decision.

Actual Line Items for Special Ledger

Hello,
I wrote an report to show FI-SL balances.
In addition to that, now I need the actual line Items for them (table TRACTSLA)
I've found a transaction called KE5Z, which is for PCA line items.
Is there also such a transaction for special ledger line items, which I can reuse?
Thanks in advance.

Tty KE24, KE25.
Regds,
Anil

New GL or Special Ledger

We are in the midst of upgrading our environment to ECC 6.0 but we are taking on a Financial Re-design effort - I am looking to leverage the NEW GL to remove some of our dependency on a CO-PA reporting design and I am hearing from some colleagues that they would like to use - the Special Ledger to support the new Financial reporting requirements u2013 but I feel the NEW GL is the way to go with the design since it is more integrated with standard reporting u2013 What are your thoughts about continuing to use the Special Ledger functionality over the New GL functionality in ECC 6.0 ?
Moderator: Please, search SDN

Hi,
Definitely, switching over to New GL rather than continuing in conventional SPL. New GL has lots of advantage and flexibility. Please go thru the documentation AC210 - New General Ledger Accounting for more details or refer below mentioned link.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/2d/830e405c538f5ce10000000a155106/frameset.htm
Best Regards,
Madhu

Standard report for FI Special Ledger Line Item report

is there any standard report for FI Special Ledger Line Item report

Hi
GD23 for Display of SPL Document
GD13 for Trail Balance of SPL
GCAC for Ledger Comparision
GVTR Balance Carry forward in SPl.
Assign Points if useful.

Problem in extracting data from Z totals table (special Ledger)

Hi Gurus,
I am in a task of pulling in specific fields from the Z Totals Table of Special Purpose Ledger into the cube. We only need totals records and do not need line items.
In SBIW, i have generated the transfer structure and datasource for totals table as per the steps of Generic extraction.
The problem is that am not able to see all the fields (like balance carried forward, total transactions) in the selection fields screen. While extracting i choose totals records only. But now my datasource got generated and am able to see that it is active (green). But some important fields like balance are missing.
Please let me know your suggestions / ideas.
Thanks
Shreya

We have the exact same Challenge and Issue. When I view my generated extract structure 3FI_SL_ZB_TT, I don't see any of my key figures. This was created off the Special Ledger Summary or totals table.
For Instance, I need fields KSLVT through KSL16. That is, Balance Carried forward in Group currency (period 0) and, total of transactions of the period in group currency, (periods 1-16). I don't see these at all in the generated extract structure. Does that mean it must be appended in via transaction RSA6?
Also, to get the Balance Carried forward do I have to add 0BALANCE to the extract structure?
Finally, besides the beginning balance, which wiil remain constant, can I get Month-end Year To Date Balances using this approach. Note, I don't need detail from the line items table. I just want to make sure I don't need to use that in concert with a Delta and ODS to get my Month End YTD Balance. I only need this cube for Balances.
Thanx,
Joe M

FI-SL Special Ledger Extractor (Delta not working) Issues

Hi,
We are creating extractor for Special Purpose Ledger using standard SAP methodology.
Step1: Goto Transaction BW01 --> select the Summary table ---> Check for total records and line Items and then execute. This results in extrators created for totals and Line Items.
Issue 1: The Summary table eg. ZLTST has special ledgers Z1, Z2 and ZA where Z1 and Z2 are for spot balances and ZA is for Average Balances, the issue is we dont see any extractor for ZA (we do see extractors created for Z1 and Z2 both totals and line Items)
Step 2: Goto transaction BW03 ---> select the totals extractor and double click
Issue 2: When you double click the check box to Activate Delta Update for Z1 and Z2 (totals) is disabled???
If anyone has configured Special Ledger Extractors in past for release 4.7 and higher please let me know the process to set up delta

Hi Gilles,
As you are a FI-SL consultant, can you provide me peformance issues on FI-SL?
I posted a thread on New G/L and FI-SL performance
My apologizes to post that question on this thread.
Thank you
Bernard

Special ledger plan data exctraction

I'm trying to extract special ledger plan data on a line item level.
We have a custom defined Z -starting special ledger tables defined in our system:
T -table (summary table)
A -table (actual data on line item level)
P -table (plan data on line item level)
I can extract the actual line items from our T summary table through the standard SAP defined special ledger extractor.
I have received a response from SAP that the standard extractor can only extract plan data on a summary level.
I have decided to try to create a custom extractor that will extract the items through a query from the P - table.
(you cannot extract directly from the p -table as there are currency/unit references needed from other tables that seems over complicated).
I'm also a little bit puzzled with our special ledger configuration, P - table seems not to have any items, but still plan data exists in the system. (possibly in the GLPCP table?)
Would someone have a clear idea in terms of special ledger plan data extraction?

Hey Dominic,
I'm pretty sure the folks at SAP would have an issue with being quoted here in the forums. If you want to post some kind of a summarization of their response, that's probably OK.
-nathan

How to Populate Materialk number in special ledger

Hi,
We have special ledger ODS where we have material number as data field. But its not getting populated. The table in R/3 used for special ledger extractor doesnt have Material number. How to populate material number in BW for special ledger?
Thanks

Hi Rajesh,
I am using PEXR2002 format for Idoc. Problem is i want Cheque number to populate in the Idoc for assigned payment method. For that i have assigned payment method for the cheque lot using t-code FCHI. After this i created proposal and run the payment. Status shows 1 generated, 1 completed. But the Idoc doesn't get created.Whats the problem. Can someone help me in this issue.
Thanks,
Shilpa
Edited by: Shilpa Korad on Jan 20, 2010 9:29 AM
Edited by: Shilpa Korad on Jan 20, 2010 9:48 AM

How do I get a special ledger doc to create from a PCA distribution?

We are looking at using PCA distributions. Execution of these cycles must create a special ledger document. It's my understanding this is done by assigning the appropriate activity/bus transaction to the special ledger. The activity is PCAD. When I try to assign this activity to our special ledger via GCL2, PCAD is not included in the list of possibilities for assignment (non-assigned activities that can be assigned). We currently use cost center distributions and those transfer to special ledger via assignment of activity RKIV to our special ledger. Not sure what the trick is to PCA distributions. Any clues?
Thanks for your response.

Hi Judy,
The activy PCAD is related to Component EC-PCA and is possible for Ledger 8A.
In Order to to bring the Distribution cycles related data meaning the EC PCA Records with Activity PCAD, you need to setup Roll up ledger with appropriate settings. Create a roll up ledger and execute after distribution cycles execution during MEC.
Hope this clarifies the point.
Murthy Karra

Statistical postings in special ledger

Similar Messages

Maybe you are looking for