Statistical set up table / V3

Hi,
--I just completed a review and a test on IDES (in R3) on the topic statistical set up process for the logistics customizing cockpit
1. The document kept referring to V3 scheduled job and V3 update: Can you bring this V3 in simple terms for me? Was I supposed to see something called V3? What really is V3 update?
2. There was a discussion about running OLI17BW transaction to set up the statistical table for the logistics application number. I followed the discussion but what actually is this statistical table and what is it for?
3. In this same discussion, it stated that you can no longer use the statistical data already contained in setup table and you have to delete it via LBWG Can you touch on this quote to help me get the logic behind it? What is this setup table and how do I view its content?
Thanks

Hi Amanda,
The V3 update is the method used to load your QRFC queue. This method is identified in transaction LBWE and you can change your method there. In your case, you need to select the option next to Application 11: SD Sales BW. Without getting to involved, "Queued Delta" is probably chosen most often.
In OLI7BW, your are filling in the setup tables for Initializing SD data transfers. If you want to load a year's worth of data, then you load that year's data into the setup table using OLI7BW. Then you can go to BW and run a full load or initialization for that data. If, for example, you wanted 2006 sales data, you would identify you SD number ranges that were created in 2006, select those sales documents in OLI7BW and execute the transaction in the background for large amounts of data (or foreground for smaller datasets). After successful completion, you can go into BW and run you infopackage wide open and you will get your 2006 data. If you loaded 2005 and 2006 into the setup tables, running the IP wide open would give you both years.
LBWG deletes the data in the setup tables. If you load 2006 data in the table, and then load the data a second time, then you will have duplicate data. You will need to run LBWG to wipe the data and start over.
Thanks,
Brian

Similar Messages

How to extract data into the set-up table for 2LIS_06_INV LIS structure

We are using ECC 6.0 and SAP BI NW 2004S. I activated the 2LIS_06_INV (Invoice Verification) structure. Interestingly, I don't see any Events under this structure (MC06M_0ITM) - my understanding is the events usually determine what type of data is generated for a given structure.
I see Invoice Verification when I use the Inventory Management -Perform Setup option when doing the set-up tables. However, when I use this option, I get a message saying " No extraction structure active or no BW connected".
Can someone list the pre-requisites and the steps to load the set-up table for the 2LIS_06_INV structure.
Thanks,
Sanjay

1: RSA5 Activate Data Source
2: LBWE Activate datasource again
3: SBIW Fill setup table 'Settings for Application-Specific DataSources (PI)'-> 'Initialization'->'Filling in the Setup Table'->'Application-Specific Setup of Statistical Data'->'Invoice Verification - Execute Reconstruction'

Problem about fill set up table

Hi all,
I got a problem when I run the fill set up table for sales billing data source. what I did is:
first delete the setup table then oli9bw->type in a sales document no.(as I only want this order data), then give a run name, last execute, but I got the message as follow:
Data source 2LIS_13_VDITM contains data still to be transferred
Could you pls explain what this means, and what should I do to solve the problem
Thanks

Set up table definition
Setup table is store the historical data, where as the delta records are updated in delta queue not to set up table.
So once historical data is loaded you can delete the contents of the set up table.
name is extract sturcture of your data source + setup
also data is taken from setup table when an init / full/ full repair load is done.
so in order to take ur records from the table delete the setup table(LBWG) and initialize it with ur records.
You can find the contents SE16
Filling set up tables
transac LBWG
+ SBIW -> Logistics -> Managing Transfer Information Structures-> Setup of Statistical Data-> Application-Specific Setup of Statistical Data
set up tables
Set up tables
Set up tables
view of set up tables data in se11??????????
Set Up tables..
lo: delete set up tables: DOUBT
LBWQ is the extraction queue and RSA7 is delta queue. Data is sent to delta queue from extraction queue through collective job scheduled in transaction LBWE.
when we want to extract the data using LO Cockpit, the data will be come to the extraction queue first and from there it will processed to the delta queue. SO lbwq works as a outbound queue.
If the update mode is Unserialised V3 then as soon as the document is posted it comes update table which you can see in Tr. Code SM13. After the jonb is scheduled the records come to RSA7 i.e delta queue from which BW pulls the data
If you use u201CQueued Deltau201Dupdate method then the data moves to Extraction queue(LBWQ). Then run Collective update to move the data from LBWQ into Delta Queue (RSA7). Then schedule the data using the infopackage by selecting Delta Load in the update tab.
So in If you are going to do Setup table filling, delete the data from LBWQ.
The usage of Extraction queue(LBWQ) comes in to picture in delta loading. But actually system starts collecting the data (whenever there is document creation in R/3) after activating the EXtraction structure.
Steps to Be Performed
We know that there are 4 types of delta extraction that are available in LO. If you use u201CQueued Deltau201Dupdate method then the data moves to Extraction queue(LBWQ). Then run Collective update to move the data from LBWQ into Delta Queue (RSA7). Then schedule the data using the infopackage by selecting Delta Load in the update tab.
Here is Roberto's weblog:
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
check this out...
LBWQ - T code is for what?
Ttransaction LBWQ
What is LBWQ?
Assign points if it helps
Hope it helps
regards
Bala

Lo set up tables

HI ,
i want to use 2lis_02_itm and 2lis_03_bf
Let me know how to fill set up table .
for these to extractors.

Hi,
transaction to fill setup tables are OLI*BW and LBWG to delete the related content!
OLI0 C Plant Maintenance Master Data
OLI1 INVCO Stat. Setup: Material Movemts
OLI1BW INVCO Stat. Setup: Material Movemts
OLI2 INVCO Stat.Setup: Stor. Loc. Stocks
OLI2BW INVCO Stat.Setup: Stor. Loc. Stocks
OLI3 PURCHIS Statistical Setup
OLI3BW Reorg.PURCHIS extract structures BW
OLI4 SFIS Statistical Setup
OLI4BW Reorganized PPIS Extract Structures
OLI5 PMIS Statistical Setup
OLI6 Periodic stock qty - Storage locatn
OLI7 SIS Statistical Setup: Orders
OLI7BW Reorganized VIS Ext. Struct. Order
OLI8 Set Up SIS for Deliveries
OLI8BW Reorganized VIS Ext. Struct. Del.
OLI9 SIS Statistical Setup: Billing Docs
OLI9BW Reorganized VIS Extr. Struct. Bill.
OLIA C Maintenance Processing
OLIB PURCHIS: StatUpdateHeader Doc Level
OLID SIS: Stat. Setup - Sales Activities
OLIE Statistical Setup - TIS: Shipments
OLIF PPIS: Setup-RepetitiveManufacturing
OLIFBW Reorganized Prod. Extract Structure
OLIIBW Reorg. of PM Info System for BW
OLIM Periodic stock qty - Plant
OLIP C Plant Maintenance Planning
OLIQ Reorganization of QM info system
OLIQBW Reconstruct QM Infosystem for BW
OLIS LIS in the IMG
OLISBW Reorg. of CS Info System for BW
OLIX Stat. Setup: Copy/Delete Versions
OLIZ INVCO Stat.Setup:Invoice Verificatn
OLIZBW INVCO Stat.Setup:Invoice Verificatn
-Shreya

Regarding SET UP table filling

Hi All
I have a small doubt,
Why do we need to fill the set up table when there is not user activity in the source system?
Is this going to lock the application tables like vbak, vbap, vbuk etc,.,?
what happends if i run the statistical run when the users are active in the system?
I want to do set up fill for orders starting from 2005 to July 2009.
When is the best time?
regards
Janardhan KUmar K

Hi,
Prod system will be busy during your set up tables filling time.
Try to check ECC system load burden and fill set up tables data when system have required free application servers(SM50/51). Even try to fill set up tables in background.
if possible, use selections and fill set up tables.
Thanks.

Filling of set up tables for several company codes

hi
i am filling a set up table for the application specific inventory control statistical data. But while setting up data filling selection parameters contains selection parameters for the single Company code.
But in my scenarios there are several company codes whose data resides in the R/3 and i need to bring data for all company codes in the set up table.
so now filling up the data in set up table, shall i have to fill up data for individual company code, OR i have to fill data for one company only and on delta load data pertainig to other company codes will be populated to the set up tables.
kindly give ur expert advice in this situation.

Hello,
i dont understand why should it be mandatory to fill the company code on r/3 side while initialisation!!
But even if it is mandatory, u have to do one by one init runs on R/3 side for all company codes that you need.
Check in rsa3 for records after the init runs.
If it was not mandatory, u could have run the setup(init) run on r/3 side for all company codes at a time by keeping the field blank!!
Also again in the BW side you can have company code for selection in the infopakage!! there u can also have it as a range rather than running for one at a time.
Hope it is helpful now..
regards,

What is the use of delet set up table in lo **** pit, exactly what happenda

what is the use of delete set up table in lo **** pit, exactly what happened if we do the process, is all tables will lose their data which r available in functional module,
Why i'm asking this, because we assign functional module in LBWG.
plz .......
thanx
vidhu

HI Vidhu,
Initially we don't delete the setup tables but when we do change in extract structure we go for it. We r changing the extract structure right, that means there are some newly added fields in that which r not before. So to get the required data (i.e.; the data which is required is taken and to avoid redundancy) we delete n then fill the setup tables.
To refresh the statistical data. The extraction set up reads the dataset that you want to process such as, customers orders with the tables like VBAK, VBAP) & fills the relevant communication structure with the data. The data is stored in cluster tables from where it is read when the initialization is run. It is important that during initialization phase, no one generates or modifies application data, at least until the tables can be set up.

How to set the table input in Query template?

Hi all.
I need to call a Bapi_objcl_change, with import parameter and a table as an input. I have done this, in BLS. I have set the table input in the
form of xml. In BLS, I get the output(the value gets change in SAP R3, what i have given in BLS). But if i set the same xml structure in
query template, I didn't get the output. Table input parameter does not take that xml source. How to set the table input in Query template?
can anyone help me?
Regards,
Hemalatha

Hema,
You probably need to XML encode the data so that it will pass properly and then xmldecode() it to set the BAPI input value.
Sam

How can i enter multiple sales order numbers to set up table

Hi,
I need to reload about 8,000 sales orders to the set up table and the SO numbers are very scattered, so i can not enter them as a range. In transaction OLI7BW Sales Document field has no multiple selection option, therefore i have to enter the documents ONE BY ONE! Could you please tell me if there any faster way to enter them?
regards,
Tansu Aksu @ CHEP

Try this link..
http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
Regards.
PS: if it help you, pls assign points.

Extracting similar data from a dynamic set of tables

I want to select common fields from an arbitrary set of tables, adding an extra field that is the table name, and return all of these rows in a single table. I know the steps but I am getting bogged down in the details (being new to Oracle):
--Create a temporary table.
--Generate a dynamic SQL statement to grab the data for each table of interest.
--Execute that query and store the results in the temporary table.
--Output the entire temporary table and delete it.
Here is my latest attempt:
================
Create global temporary table myTempTable
     Title varchar2(30),
     IdType number(8),
     Count number(8)
) on commit delete rows;
declare
sql_stmt VARCHAR2(200);
tname VARCHAR2(30);
begin
for tname in (
select distinct table_name from sys.ALL_TAB_COLS
          where owner='me' and table_name like '%ASSIGNS'
loop
sql_stmt :=
'insert into myTempTable(Title, IdType, Count) ' ||
     'select '':1'', IdType, count(*) from me.:1 group by IdType';
EXECUTE IMMEDIATE sql_stmt USING tname;
end loop;
select * from myTempTable;
commit; -- to delete the temp table
end;
================
The error messages are:
--expressions have to be of SQL types
--an INTO clause is expected in this SELECT statement
What am I missing here?

(1) First of all I am executing the whole script in SQL*Plus, thats why I use SQL*Plus command like the SLASH Operator.
<br>
(2)
SQL> VAR cur refcursor
SQL> CREATE TABLE mytemptable AS SELECT ename table_name, deptno idtype, sal cnt FROM emp WHERE 1=0
Table created.
SQL> DECLARE
   sql_stmt   VARCHAR2 (200);
   tname      VARCHAR2 (30);
BEGIN
   FOR tname IN (SELECT DISTINCT table_name
                            FROM SYS.all_tab_cols
                           WHERE owner = USER AND table_name LIKE '%EMP')
   LOOP
      sql_stmt :=
            'insert into myTempTable select '''
         || tname.table_name
         || ''' table_name, deptno IdType, count(*) cnt from '
         || tname.table_name
         || ' group by deptno';
      EXECUTE IMMEDIATE sql_stmt;
   END LOOP;
   OPEN :cur FOR
      SELECT *
        FROM mytemptable;
   EXECUTE IMMEDIATE 'drop table myTempTable';
END;
PL/SQL procedure successfully completed.
SQL> PRINT :cur
TABLE_NAME     IDTYPE        CNT
EMP                10          3
EMP                20          5
EMP                30          6
3 rows selected.Since we DROP the table at the end we don't need an explicit commit, since all DDL statement will implicitly commit anyway.

Not getting set up record in Set up tables

Hi ,
I am able to see revaluation records in MB5B (Stock on posting date) for one perticular posting date. but this record i am not able to see in Bw side ,even its not avail in RSA3 level.
So wat cud be the reason its avail in data base table but not filled in Set up tables ?
regards
raja

Hi vishwanath,
This is bcoz of
U have not done the delte delta queue( In LBWQ "MCEX03" entries).
first U have to delete the MCEX03 Entries ---> then only u have to do fill the setup tables.
follow these steps:
1.First goto LBWQ --> delete the MCEX03 Entries.
2.Refresh .
3.Check the datasources in RSA3 ( Datasources Should show Zero Records )
4.Do the Fill setup table.
5.Then check once again LBWQ ---> It should not have MCEX03 Entries.
6. Check Datasources in RSA3 ( Datasources should have data).
7.Do replication & Extarct data.
for ur problem this is the solution ( I have faced this).
Thanks,
kiran.

Error while filling the set up table for 2LIS_11_VAITM

Dear Experts,
i am facing an error while filling the set up table for 2LIS_11_VAITM in the source system.
The error was "Company code for sales org 9000 does not exist (document 1326)".
when i checked the document in the Header table VBAK,company code was blank for the document .
Company code was there in the selections for the setup table.
The error means that company code should be maintained for the sales document as per my knolwedge.i think document was not created properly in the source system.
Could you please help me out to over come the problem.
Regards,
Sunil...

in the selection screen for filling the setup table, there is a parameter No. tolerated faulty documents
you'll have to enter at least '1' here in your case
it might be that there are other erronuous records, in that case it will crash again, and you'll have to increase the value for this parameter
(under "normal" circumstances, all documents in the source should be correct... but apparently it's possible to circumvent this)

Error while filling set up table SD-Billing Documents - Perform Setup

Hello friends,
while filling set up table of SD-Billing Documents - Perform Setup
i am getting error 'TSV_TNEW_PAGE_ALLOC_FAILED' . i am executing this job in background process . Please suggest me a solution .
Regards
Nilesh Vakil

Hi,
Try some other LO extractor in RSA3 to check if you get the same error.
If you dont then it may not be system memory issue, check if thr is some user exit written for the extractor.The problem could be in the user exit whr the internal table may get overflown and lead to the page overfloen dump.
If this is also not the case try reducing the packet size.
Let me know if the issue is resolved.
Regards,
Ashwin

LO Set up tables deleted while upgrading the source sys from 4.6c to ECC6

As a part of ECC6.0 upgrade tasks, our BASIS team deleted all the LO set up tables in the source system(4.6C) and . After the upgrade, we are not finding any queues in RSA7 or in SMQ1. But, we have a lot of Delta's and few full loads are running on BW (3.1) side for these LO's.
1. What are the steps we need to take inorder to enable/ work the existing delta's and Full Loads in BW(3.1). With the new ECC6.0, we don't have plan to enhance any data sources. So, do we need to set up / fill up the tables again for LO's? If yes, Since we have huge data in source system , it will take a lot of time to fill the tables,,,,Is there any option to fill the tables only for the specific period and enable deltas?
Please help urgently interms of providing step by step guidelines.
2. We also have the following DS (Delta enabled) with the existing source system. Please advise how to make to work for these delta's once after the source system upgrade.
0PM_OM_OPA_2
0PM_OM_OPA_1
0FI_AR_4
COPA DATA SOURCE
Advance Thanks.

BW USA,
I think the options are given clearly. You will have to reload the data and I hope you have the DSO(Dataware House Layer) used in your BW side before the data is going to the Cube, otherwise you would have to do a slective delete and load that data to avoid duplication.
There is one other way, but I have never tried it. I am sure your Basis team would have taken a backup of the system before upgrade. Try to find whether you can restore the delta queue (advice from SAP would be helpful as there are many control tables need to be in sync). If this option is not possible then you would have to do what is already given.
Any 0FI_* data sources, you can go by the last available period and you can reinitialize without data transfer and load the missing whole period, as these are after image data you would have a DSO inbetween and you should not have any problems.
For CO-PA whether it is Account or Cost based you can easily re-establish the delete and covere the missing by fiscal period load with repair.
The steps for FI & CO are below.
1. Reload missing data by period with FULL LOAD WITH REPAIR option.
2. Re-init with conditions (if you already had any) without data transfer.
I think this should fix your issues. I have not used the other two data sources.
Goodluck,
Alex(Arthur Samson)

Error while filling up set up tables in SAP R/3

Experts,
I trying to fill up set up tables for application component 11 (SD) for my LO extraction. It gives me the following error
<b>Error determining rate: foreign curr. RMB local curr. AUD date 06/19/2007 (doc. 100025787)</b>
when I check in RSA3, I have data before 06/19/2007 but nothing is filled up after that.
Does anyone know how to fix this?
Thanks
Ashwin

Hi Ashwin,
Did you get the solution for issue(filling the setup tables for applicaion component 11)
"Error determining rate: foreign curr. RMB local curr. AUD date 06/19/2007 (doc. 100025787)"
thanks in advance.
Bhaskar.

Statistical set up table / V3

Similar Messages

Maybe you are looking for