Statistical setup actine or not

Hi Team,
In the filling of setup tables.
How do we know if the statistical setup is active or not-Apart from checking the actual tables.? Is there another way?
What if there is no activity and the setup is actually pulling 0 records.HOw do we differentiate.?
What happens if we run it twice..?
does the records get duplicated.?
Thanks for your time.
Andy

hi andy,
there is no possibility to check the setup table fill up is in active state. but if your data source is active means that's enough, it will defiantly fill the setup table.
if you run the setup table twice means it won't send the copy of the same records(duplicate) again.The setup table fill up finished, you are checking the data in RSA3 it showing 0 records means that extract structure don't have any data with in it.
if helpful provide reward points
regards
harikrishna N

Similar Messages

Errors in Statistical Setup for 2LIS_11 and 2LIS_13

Dear colleagues,
in the process of filling setup tables for SD Sales Orders (11) and SD Billing Documents (13) I have encountered some errors.
In order to investigate the problem further, we have increased the tolerance for the number of faulty documents.
For the billing documents (13) this allows me to consult the log file and to trace all faulty documents. For the sales orders (11) however, we have also increased this tolerance number (1000). The log shows only 1 faulty document, while 1000 errors are tolerated, and the runs fails with this 1 faulty document (job cancelled).
The full log description of the cancelled job is:
Job started
Step 001 started (program RMCVNEUA, variant &0000000000100, user name BExxxx)
Data source 2LIS_11_VAHDR contains data still to be transferred
Start of order processing
Error determining rate: foreign curr. local curr. EUR date 04.05.2006 (doc. 20149127)
Job cancelled
Context:
At this stage I do not want the delta queue to be emptied. That's why the error states that the 2LIS_11_VAHDR datasource still contains data.
My questions are:
- Is this normal behaviour for this setup (or this particular error), or is it likely to be a program error?
- If it is normal behavior, can I "force" this run to log more than 1 error, while 1000 are tolerated?
Kind regards,
PJ

Hi
It could be because of main memory problem... so Restrict your selections and do the statistical setup
by the way how many comp codes you have? restrict with comp codes or doc ranges
Thanks,

Statistical Setup failure - Purchasing application

We upgraded our R/3 Plug-In from 2002.1 to PI 2004.1. To test the setup and init process,we ran the statistical setup run for 02 application. The setup program is successful but the documents are not posted into the MC02....SETUP tables. Checked the NPRT transaction to check the log entries, it displays that 252,000 documents are selected. Checked the extraction using RSA3 as well, it returns 0 records. Are there any specific entries that needs to be checked or entered for PI 2004.1 upgrade with reference to Purchasing application? or should I check any table lock stuff with reference to MC02...SETUP tables?

MS,
sorry for being so insistent, but for an analysis it is really important to check, if the statistical setup run actually created any data in the setup table.
If there are no records in the setup table, then the RSA3 can not show any records.
Best regards,
Bernd Sieger

Statistical Setup (OLI3BW tcode)

Hi all,
Can anyone please explain me what the below fields mean and what should I select to do a Statistical setup ie to do a full update.
Control of Recompilation run
1. Name of Run(New Run)
2. Termination date, Termination time
3. block all documents
4. Extraction structres BW
Document data restriction
1. Archiving Session
2. Purchase Org
3. Purchase document
4. Document date
I am trying to extract data from datasource 2lis_02_hdr using lo-cockpit and I have followed the below steps
1. LBWE transaction - inactivate update, deleted setup tables in application component 02(MM) and also deleted any delta queue in /nrso2
2. Maintain extract structure and datasource
3. Activated the update(Is this necessary to do before replicating the datasources ?)
4. Replicated the datasource in BW
5. Assigned infosource and created a infopackage to load the data to PSA.
6. Set up statistical update(tcode OLI3BW). I am not sure if I have to do this before step 5. I am struck here and unable to understand the fields to do a statistical update
Please help me.
Thanks,
Sabrina.

Hi Sabrina,
1. Name of the run - You can put in any name here. It does not matter. You can call it 'RUN1' or 'TEST1' whatever. It is just for you to differentiate between different runs.
2. Termination Date and Time - When it is filling up the setup tables, it might go on for a long time. So you can put in a time beyond which if the set up runs, the system must teminate it. Normally if you know that if it runs for more than 2 hours there is something wrong, you specify a time 2 hours from the current time as the 'safety upper limit'.
3. Block all documents - If you set this, all the records are blocked in the database from changes during the setup run.
4. Not sure...
You can break up your setup run in parts broken down by date ranges or document numbers etc. For eg. set up for all records with dates from Jan to March, do full upload into BW, delete setup tables, run setup again for March to May etc. For this you have the rest of the selections.

Statistical Setup Tables

What are the steps to delete and fill up the Statistical setup table for a 2LIS extractor? Thanks

Hi Harpal.
In R/3 you have to make the following steps.
1) Transaction SBIW.
2) "Business Information Warehouse" --> "Settings for Application-Specific DataSouerces" --> "Logistics" --> "Managing Extract Structure" --> "Inizialization".
3) "Delete the Contents of the Setup Table" --> then select the Application related to the extrator 2LIS that you are interested in.
4) "Filling in the Setup Tables" --> "Application-Specific Setup of Statistical Data" --> then select the Application related to the extrator 2LIS that you are interested in.
You can check the right Application via transaction LBWE where you can see all the extractors with the related Application.
PAY ATTENTION that the delete and fill of the SetUp Tables is for Application and not for extractor, as you can see in LBWE for Purchasing (02) where you can see that the three extractor 2LIS_02_HDR - 2LIS_02_ITM - 2LIS_02_SCL are all related to 02 Application.
Ciao.
Riccardo

Regarding statistical setup running

Hai
iam loding data for purchasing data using 4 data sorses.(2lis_02_scn,2lis_02_cgr,2lis_02_sgr,2lis_02_itm) when i run the statistical setup by using OLI3BW i am geting data of ITM AND SGR data sorses into setup tables, but i am not getting data of remaining data sorses , data is present in the tables of that data sorses.what is the reason , pls provide solution its very very urgent. points will be assigned. and when i go to LBWE to see the structure the below error is coming, pls explain it.
*Structure maintenance not provided for extraction structure MC02M0CGR ->*_
Message no. MCEX152Diagnosis
Structure MC02M_0CGR concerns a technical extraction structure. The inclusion of additional fields by using the structure maintenance is not part of the procedure for this.
If an extraction structure is used for extracting transaction data from two different business events, then the generic filling of the extraction structure fields from the fundamental communication structure data does not normally occur. An enhancement of structure MC02M_0CGR could then cause the newly included fields from the different events to be filled differently or not at all.
Procedure
Use the fields delivered by SAP for the structure MC02M_0CGR. Check to see whether the additional information you want can be extracted using other structures.

If the SCN structure is anything like the CGR structure, then neither will load. To load into the setup tables, you need to have active structures.
It looks like someone was changing the CGR structure and somehow damaged it or deactivated it. You need to fix this and then reactivate the structure. Then you will get your data.
Good Luck,
Brian

Lo statistical setup ?

Hi
I have faced a question: why SAP has recommended Statistical setup for filling setup tables.. any technical reason behind..
Thanks.

Hi,
*In Lo's all the data sources are based on cluster tables so we have to fill the statistical setup because cluster table will not allow Header,item, schedule Data sources in a single table ... All need to be maintained seperatly. Thats y we are going for statistical setup.*Regards,
Statistical setup means filling the setup table with historical data when we are working for the first time on any data source. Apart from data source 2LIS_02_BX ( its for stock initialization in Inventory here we have to use MCNB T-code).
When we are filling the setup tables we can fill Parellely for different document numbers( Eg. If it is sales document No or vendor a/c no etc....)
Setup tables are cluster tables where we can't see the data and we can find only count of the records in RSA3 extract checker.
Regards,
Uday.

Initialise Statistical Setup of Movements by quantity

I have started the statistical setup of movements by quantity (MC03BF0SETUP), is this table populated from MSEG? Thanks

hi Niten,
2LIS_03_BF populated from table MSEG, other origin tables can be found
http://help.sap.com/saphelp_nw2004s/helpdata/en/05/c69480c357354a8846cc61f7b6e085/frameset.htm
for performance, check oss note
General BW/logistics extraction
(TSV_TNEW_PAGE_ALLOC_FAILED/SYSTEM_IMODE_TOO_LARGE)
Notes 409641, 417307, 419465, 548845 and 589997
2LIS_03_BF extraction
Note 454267
hope this helps.

Statistical setup: New Run indicator

Hi,
I don't understand the New run indicator option in the statistical setup. For example the OLI9BW.
The following is stated about this indicator:
New run
Indicator that determines that a new run should be started.
Use
If you set this indicator, document processing begins even when the first document is chosen, if a restart entry under the run name in use still exists.
What I understand is that a document can exist in both runs if you set this indicator. But what's the purpose of it??
BR,
Brian.

Hi,
Say you have started a setup in R/3 for the first time. You give a name to the run and tick this checkbox and execute. The termination time you have set in the program has come and the setup is still not complete. The set-up job will terminate.
To restart the job, you enter ths same job name and you uncheck the new run checkbox. The setup will restart from where it terminated.
Cheers
Neeraj

STATISTICAL SETUP- LO

Hi Gurus,
What is STATISTICAL SETUP in LO extraction.
Regards,RAMU>

Hello ram,
Please go thru this.
Setup of Statistical Data
During a setup (statistical setup), the information structures are filled with consistent and complete data.
The statistical setup of one or more information structures is necessary in the following cases:
     If an information structure was created using the Logistics Data Warehouse (statistical database)
     If the update for the information structures was activated after documents were already in the system that were meant to be included in the statistics
     If the statistical update in Customizing was changed
     If the statistical data is inconsistent
Preparation
To restart a statistical update after an termination, allocate a name to each background run of the setup.
If a statistical setup is then terminated or if a setup is interrupted from the archive documents, the status of the setup will then be saved under the name of this run.
When restarting under the same name, processing will continue from the intermediate status that was saved.
After the run is successfully completed, the intermediate status that was saved is deleted.
Recommendation
     The reports should run as a background job.
     You should not change the sequence of steps that describe the statistical setup of information structures (procedure).
Procedure
The following steps are necessary to perform a complete statistical set up:
1. Initialize version for statistical setup
For reasons of security, the statistical data determined during a setup is not directly written into an information structure, but are saved instead under a separate version name. This version must be activated for intermediate storage before the statistical setup is carried out.
For this purpose, the report RMCSISCP is available.
The actual data is saved under the version name "000".
2. Save actual data
The actual data in the system should be saved for safety reasons.
Again, use report RMCSISCP for this purpose.
3. Edit all archived documents
To do this, you can use the various reports that are available in the individual applications.
4. Edit all documents in the system
This also takes place via the various reports that are available in the individual applications.
5. Transfer the data which was obtained in the statistical setup from the statistical setup version to the actual version
The data obtained is only imported to the actual version instead of the existing data after the successful completion of the statistical setup.
The report RMCSISCP is again used for this purpose.
Note
You can see the versions of the standard information structures by using the standard analyses. Here are the following possibilities:
a) You can allocate the version number of the version as a value to the user parameter "MCR" that you would like to see.
On the selection screen of the standard analysis, the field Version under Parameters is automatically completed with the given version number. The version number can be changed simply by overwriting it.
This setting is user-dependent and applies to all standard analyses.
b) If you assign the value "X" to the user paramter "MCR", the version "000" will generally appear on the selection screen of the standard analyses. Even in this case, the version number can be overwritten.
This setting is also user-dependent and applies to all standard analyses.
If you want to use either one of these functions, select System -> User profile -> User parameters. You can select this function from any menu.
Recommendation
You should change the user parameters in an alternative session, as it is not possible to return to the starting point from the user parameters maintenance screen.
c) Via "User settings", you can also make specifications for the versions, which are also user-dependent, but also only refer to one particular standard analysis.
To do this, in the selection screen of the standard analysis, select Goto -> User settings.
You are now in the standard drill-down. Select Goto ->Parameters.
If you set the indicator "Selectable version", the field "Version" with the version number "000" will also appear on the selection screen. This version number can be overwritten at any time and thus changed.
6. Follow-up processing
After successfully completing the statistical setup, you can then delete data that is no longer needed by deleting the version under which this data is saved.
These include:
o     Safety copy
o     Version for statistical setup
The report RMCSISCP can be used for this purpose.
Activities
To carry out a statistical setup, procede as follows:
1. Enter your selection requirements.
2. Save your entries.
3. Select Program -> Execute.
Description of the report RMCSISCP
The report RMCSISCP is used in all information systems in Logistics. For this reason, the report is described below.
You can use report RMCSISCP you can copy or delete versions from information structures under which statistical data has been saved.
The data, that has been saved in an information structure, is different due to the version under which they have been saved.
The version "000" includes the actual data, i.e., the data that was written into the information structure as a result of the statistical update.
The intermediate results are stored in the versions that begin with "&(" and that are created when an information structure is setup.
Planning data is stored under all other versions (that means version A000 and all numerical versions except version 000).
The statistical setup of an information structure is carried out just like the online update, with the difference being that the data is not usually written into version "000" first, but rather into a version that you choose, that begins with "&(". The data is only copied from this version into the "000" version after the successful completion of the initial transfer.
Note
While copying into the "000" version, you must not carry out any postings that update the respective information structure.
To keep the old version "000" (the existing actual data) from being lost, save it under another version. This "safety copy" is also generated with report RMCSISCP.
You can use the indicator "Initialize target version" to delete data data stored until now under this version. If the indicator "Do not copy initial records" is set, data records are only set if at least one key figure is not initial.
Attention
The report RMCSISCP should only be used for copying, deleting and for copying + deleting. Copy Management should be used to meet more complex requirements (Tools -> Copy Management).
Activities
1. Enter the name of the information structure that is to be copied/deleted.
2. Choose a processing type.
The Copy Management screen is called up. The processing type that you have selected is already set.
3. Here you make all the remaining entries required for selection.
Additional functions
You can also call up a log which contains detailed information about all of the completed setup runs.
This function allows you to make restrictions by specifying the start date of a run, the run name, the user and the application.
You can also either print the list of selected setup runs or the detail screen for a setup run.
Thanks,Ramoji.

"New Run?" in the statistical setup on R3 side

What is the function of "New run?" in the statistical setup on R3 side

Hi,
Say you have started a setup in R/3 for the first time. You give a name to the run and tick this checkbox and execute. The termination time you have set in the program has come and the setup is still not complete. The set-up job will terminate.
To restart the job, you enter ths same job name and you uncheck the new run checkbox. The setup will restart from where it terminated.
Cheers
Neeraj

Windows Vista - iPod Nano charges, setup wizard will not start

Help!
I have a new PC, and it's Windows Vista.
I have connected my iPod, and it has charged up, but the setup wizard has not come on?
How do I save music to my iPod? My PC recognises it as an iPOD, and I can drag and drop things into it as though it is a storage device. However, my iPod does not recognise this music or photo's when I turn it on and try to play stuff? There are no instructions in the box. It's brand new from argos! Never had one before, so don't know what to do.
Please help.
Curlzy
(Very fed up lady

Sorry you are having problems.
Could it possibly be any security related software that is preventing this ?
* http://kb.mozillazine.org/Installing_Firefox#Windows
Make sure that you have an official copy of Firefox. Do a clean install BUT make sure you do not use any offer to remove personal data or you will destroy bookmarks and settings. If you have problems try to give the exact error messages so paste them into your reply of attach screen shots.
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#'''Windows:'''
#*C:\Program Files\Mozilla Firefox
#*C:\Program Files (x86)\Mozilla Firefox
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
WARNING: Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. These are difficult to recover unless they have been backed up to an external device!
Lets get Firefox installed then deal with any Java problem.
* What is it that you need Java for ??
 see also http://kb.mozillazine.org/JavaScript_is_not_Java

Purchased ipad already got apple id through itunes and iphone but it is not an email address ipad setup process will not allow me to use current id or change id to primary email address - do i have to have different id for ipad

Purchased an ipad but already got apple id through itunes and iphone but is not an email address, ipad setup process will not allow me to use current id or change id to primary email address - do I have to have different id for ipad

It does have to be a verifiable email address though, you can change it here:
Apple ID support
http://www.apple.com/support/appleid/

Windows 8.1 Setup DVD does not see SSD

Windows 8.1 Enterprise x64 Setup DVD does not see Samsung SSD 840 Pro so cannot install Windows 8.1. The same SSD disk currently does have Windows 8 Enterprise and runs fine on the same laptop. Checked the Dell BIOS does see the SSD. Loaded the
latest drivers from the Dell website but did not help. Tried changing the BIOS settings from SSD to ACHI. When in setup did the SHIFT+F10 to run the DISKPART clean the partitions.
How do I troubleshoot why the Windows 8.1 Enterprise setup disc cannot see the SSD?

Hi,
According to your description, I would like to confirm if you can see SSD under the Diskpart.
If you can see the SSD under the Diskpart,I think it is related to the installation DVD.
I suggest we use a new installation DVD to test it.
Also, you can create a bootable USB flash drive, and then use the USB flash drive to install Windows.
Keep post.
Regards,
Kelvin hsu
TechNet Community Support

I am having problems with the installation of Adobe Acrobat. I received an Error 103 the setup file can not be located. Can someone help

I am trying to install Adobe Acrobat after I purchased the monthly membership. I did receive help but the after the installation is complete I receive error 103 which states that the setup file can not be located.

Hi uniquenader,
Did you encounter any errors during installation? Which OS are you using?
Did you have any previous versions of Acrobat / Reader installed?
Please use the Acrobat Cleaner tool ( Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs ) to remove the software completely,
Re-download, reinstall and check.
Regards,
Rave

Statistical setup actine or not

Similar Messages

Maybe you are looking for