Statistical Setup Tables and Full Extractions
For Full Extractions what is the relationship with the statistical setup tables i.e. no of records in the table = no of records to be extracted? Thanks
Hi,
The relationship is 1 -> 1 you have to fill the setup table, the full load only reads this structure. So if you would like to load a 2LISxx full load every night, you have to delete and refill the setup table in R/3.
Kind regards, Patrick Rieken.
Similar Messages
-
Why we have setup tables in LO extraction and why not in CO-PA,Generic
Hi Friends
Why we have setup tables in LO extraction and why not in CO-PA,Generic
Please give me reply
****************Points are assured********************
Thanks&Regards
RevathiHi Revathi,
Please check the following Threads :
[why set up tables ?;
[Why LO only having Setup tables not Others.......?;
Regards
Hemant Khemani -
Why we have setup tables in LO extraction and why not in CO-PA,Generic,FI-S
HI Friends
Why we have setup tables in LO extraction and why not in CO-PA,Generic,FI-SL. Please clarify.
Thanks&Regards
Revathi
<removed by moderator>
Edited by: Siegfried Szameitat on Nov 13, 2008 12:07 PMHi revathi,
The R/3 database structure for accounting is much more easier than the Logistical structure.
Once you post in a ledger that is done. You can correct, but that give just another posting.
BI can get information direct out of this (relatively) simple database structure.
In LO, you can have an order with multiple deliveries to more than one delivery addresses. And the payer can also be different.
When 1 item (orderline) changes, this can have its reflection on order, supply, delivery, invoice, etc.
Therefore a special record structure is build for Logistical reports.and this structure now is used for BI.
In order to have this special structre filled with your starting position, you must run a set-up. from that moment on R/3 will keep filling this LO-database.
If you wouldn't run the setup. BI would start with data from the moment you start the filling of LO (with the logistica cocpit)
I hope I have been clear.
Udo -
What are the steps to delete and fill up the Statistical setup table for a 2LIS extractor? Thanks
Hi Harpal.
In R/3 you have to make the following steps.
1) Transaction SBIW.
2) "Business Information Warehouse" --> "Settings for Application-Specific DataSouerces" --> "Logistics" --> "Managing Extract Structure" --> "Inizialization".
3) "Delete the Contents of the Setup Table" --> then select the Application related to the extrator 2LIS that you are interested in.
4) "Filling in the Setup Tables" --> "Application-Specific Setup of Statistical Data" --> then select the Application related to the extrator 2LIS that you are interested in.
You can check the right Application via transaction LBWE where you can see all the extractors with the related Application.
PAY ATTENTION that the delete and fill of the SetUp Tables is for Application and not for extractor, as you can see in LBWE for Purchasing (02) where you can see that the three extractor 2LIS_02_HDR - 2LIS_02_ITM - 2LIS_02_SCL are all related to 02 Application.
Ciao.
Riccardo -
hi,
please help me; after the activation of the 2LIS_03_BF extractor in the R/3 system ( transaction LBWE), i have tested it but (transaction RSA3) and the result is 0 record extracted.
Probably i have forgotten some phases in the configuration process like the statistical setup table.
Can explain me how do it
thanksLuigi
Check this link
Re: setup tables
also
check this
https://websmp105.sap-ag.de/bi
You need service market place ID to check this
Hope this helps
Thanks
Sat -
What is the use of setup tables in LO extraction
Hi Friends,
What is the use of setup tables in LO extraction, what is the functionality of setup tables
Thanks in advancehi,
to prepare data to be extracted to bw,
more details take a look Roberto's weblog
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
hope this helps. -
How to fill setup table and initialization
Hi,
Can any body send me the document for filling the setup tables and initialization ?
My mail id is [email protected]
Regards,
Viren.Hi
Please sent that doc. to me also.
[email protected]
Regards
Swetha -
Step by step process of filling setup table and Infocube in r3 and bi syste
Hi Expert,
Anyone can tell me step by step process of filling setup table and Infocube in r3 and bi system.
Thanks and Regards
Lalit KumarHi,
Refer the BI Preconfigured Scenarios from help.sap.com.
http://help.sap.com/bp_bw370/html/index.htm
Regards,
Hari. -
Setup table and delta mechanisim
Hi,
Can anyone explain in detail setup table concept in LO extraction and
Delta mechanisim?
SridharHi
LO Cockpit Step By Step
Here is LO Cockpit Step By Step
LO EXTRACTION
- Go to Transaction LBWE (LO Customizing Cockpit)
1). Select Logistics Application
SD Sales BW
Extract Structures
2). Select the desired Extract Structure and deactivate it first.
3). Give the Transport Request number and continue
4). Click on `Maintenance' to maintain such Extract Structure
Select the fields of your choice and continue
Maintain DataSource if needed
5). Activate the extract structure
6). Give the Transport Request number and continue
- Next step is to Delete the setup tables
7). Go to T-Code SBIW
8). Select Business Information Warehouse
i. Setting for Application-Specific Datasources
ii. Logistics
iii. Managing Extract Structures
iv. Initialization
v. Delete the content of Setup tables (T-Code LBWG)
vi. Select the application (01 u2013 Sales & Distribution) and Execute
- Now, Fill the Setup tables
9). Select Business Information Warehouse
i. Setting for Application-Specific Datasources
ii. Logistics
iii. Managing Extract Structures
iv. Initialization
v. Filling the Setup tables
vi. Application-Specific Setup of statistical data
vii. SD Sales Orders u2013 Perform Setup (T-Code OLI7BW)
Specify a Run Name and time and Date (put future date)
Execute
- Check the data in Setup tables at RSA3
- Replicate the DataSource
Use of setup tables:
You should fill the setup table in the R/3 system and extract the data to BW - the setup tables is in SBIW - after that you can do delta extractions by initialize the extractor.
Full loads are always taken from the setup tables
1. Data Flow
Relevant T-Codes
a) Initializtion
LBWE: Maintain Extract Structure, DataSource, Active Status, Job Control, Update Mode
SBIW, then follow tree menu path: Settings for App-Specific DS(PI) -> Logistics -> Managing Extract Structures -> Initialization -> App-Specific Setup of Statistical Data -> Choose XX Application -> Delete/Fill Setup(reconstructing) Table content
RSA3: Check content of setup table
b) Delta upload
SM13: Display update table/Extraction Queue content
RSA7: Display Delta Queue content
Edited by: Tapashi Saha on Jul 24, 2008 7:33 AM -
Data in setup tables and qued delta
Hi Samuris'
How can I see 1. the data in setup tables 2. Data in qued delta
3.From which table(in R/3) the data is extracted when we schedule a IP for a delta.
Do we have any transaction code to view 1,2.
Could anyone let me know exact flow of data when a request is raised from BW.I mean if it is a full load request,from which table in R/3, data gets captured.Also if it is delta load request,from which table in R/3, data gets captured.
Any help is appreciated,
Thanks in Advance!
JamesHi,
first it depends on the data source....
I guess you are talking about LO DSources.
1. you can open the table itself (usually MCaax_SETUP, e.g MC03BF0SETUP) but this will be raw data, like in a trfc LUW); otherwise call transaction RSA3 with your LO datasource in full mode and you'll see the data as it will be extracted to BW.
2 call SMQ1, double click MCEX03 for instance, again the queue name in the next screen, you'll see pending transactions (LUWS) to be updated in the BW delta queue, double clicking the TID will lead you to the data in the transaction...
The corresponding table is ARFCSDATA and it is populated when, in our example, a material document is commited.
3. it depends on your DSource: LO datasources will take their data from ARFCSDATA, other might extract their data directly from several DB tables...
hope this helps...
Olivier.
Message was edited by:
Olivier Cora -
What are setup tables and why do you need to run it
Hello Gurus,
I know the steps for setting up the LO cockpit exactors.
My question is what are the parameters that you feed into the Setup table filling screen --- like the doc numbers, start date and end date.
Why do we have to run the setup tables?
If I give the start date for setup table run for SD as 08/24/06 and end time Nill and others parameters blank, then would the set up job run for ever. Is this how you set it up in production environment.
Does setup mean, bringing the data from application table to extraction structructure?
Regards
SimmiHi,
Look at the threads below :
SetUp Tables
setup tables
setup tables
setup tables
Cheers,
Kedar -
What is the concept of setup tables in LO extraction?
Hi,
what is the concept of set up tables in LO EXTRACTION?
GIVE ME COMPLETE DETAILS and how to run deltas? I want step by step procedure.
Thanks in advance.
ravi.Ravi,
I think the blog series by Robert Negro about LO is the best available information.
SDN thread:
/community [original link is broken]
It would be nice if there is any help.sap documentation available.
Raj. -
Filtering Setup-Table and same filtering for Delta-Queue needed
Dear All,
I'm looking for the best solution to do the filtering for the delta-queue.
In program RMCVNEUA I'm filtering (excluding specific SalesOrg) data for the setup-table creation. I'm loading these data to the BW system.
BUT now my issue is, that with the delta-queue I'm getting also data for the SalesOrg I have excluded in the setup-table, as I have no filter for the delta-queue.
My Question: Where/How to filter by the same criteria the entries for the delta-queue?
Thanks for your support,
Peggy
some more details: Application 11; Queue-Name MCEX11; using 2LIS_11_VAHDR, 2LIS_11_VASTH, 2LIS_11_VAITM, 2LIS_11_V_SSLDear Arvind,
if there is no way in R/3 the solution must be in BW, but how exactly should that look like in the best/smartest way?
Let us look in detail at an Example:
DSO 0SD_O03 is getting data from 2LIS_11_VAHDR and 2LIS_11_VASTH.
1) For VAHDR I have the chance to delete not needed VKORG already in the InfoPackage, or load first to PSA and than filter in DTP or delete in Startroutine in Transformation.
2) BUT for VASTH, which has no VKORG information at all, I'm only able to delete the Dataset after it's loaded/activated in the DSO, as the rubbish-Dataset won't have any 0SALESORG. How to do that?
Thx,
Peggy -
Why to use setup tables in LO extraction
Hi gurus
please send me answerHi,
Think of the SAP application tables as Production system. Now why dont we directly do reporting on these tables or why cant we use these tables instead of ODS as these already have detailed data.
One of the major reasons is performance. If you want to load this data to BW directly with out setup tables, you cannot be sure that you have correct data in the BW system as these tables are changed by the transactions. If you still do not want to use setup tables, you should stop any changes to the tables, which is impossible (will impact the business).
I believe this is why SAP does not allow direct access to application tables and has brought in the concept of setup tables. The setup tables hold the data for us to transfer and any changes in the data records is moved to the delta queue.
Please correct me if I am wrong.
Hope this helps!
Regards,
Maddy -
Nested Tables and Full Table Scans
Hello,
I am hoping someone help can help me as I am truly scratching my head.
I have recently been introduced to nested tables due to the fact that we have a poor running query in production. What I have discovered is that when a table is created with a column that is a nested table a unique index is automatically created on that column.
When I do an explain plan on this table A it states that a full scan is being doine on Table A and on the nested table B. I can add an index to the offending columns to remove the full scan on Table A but the explain plan still identifies that a full scan is being done on the nested table B. Bare in mind that the column with the nested table has a cardinality of 27.
What can I do? As I stated, there is an index on this nested table column but clearly it is being ignored.The query bombed out after 4 hours and when I ran a query to see what the record count was it was only 2046.
Any suggestions would be greatly appreciated.
Edited by: user11887286 on Sep 10, 2009 1:05 PMHi and welcome to the forum.
Since your question is in fact a tuning request, you need to provide us some more insights.
See:
[How to post a SQL statement tuning request|http://forums.oracle.com/forums/thread.jspa?threadID=863295&tstart=0]
and also
[When your query takes too long|http://forums.oracle.com/forums/thread.jspa?threadID=501834]
In short:
- database version
- the actual queries you're executing
- the execution plans (explain plans)
- trace/tkprof output if available, or ask your DBA for it
- utopiamode a small but concisive testcase would be ideal (create table + insert statements). +/utopiamode+
Maybe you are looking for
-
Hung the iPhoto library rebuild
Intermittently, iPhoto synchronizes all my events to my iPhone 4 or iPad 2 in random order. The events are not in alphabetical order (like I have the on the computer), or apparently even time-ordered, expect that the most recently created event does
-
Edge 15: Unsual keyboard keys issue when typing
I have a thinkpad edge 15 and I have had it for several years now and sometimes if I press on "e" ,"3" "the volume buttons" I get a different resposne on my screen.For example,I would type "e" then I might get a "p" or it may effect the volume.I nee
-
I have a pretty standard settup on my machine: Windows XP, RoboHelp 7, and Adobe Acrobat 6.0 Standard. RoboHelp 5 worked fine, I upgraded to RoboHelp 7 and it works fine until I logout my machine. After a logout, I cannot open any RH projects or RH i
-
Enter class information into database
I am trying to make a searchable repository of the Java API using JSP and MySQL. I wish to enter the following things into the database 1. Classes (i) Name (ii) Short Description (iii) Package (iv) Modifiers (v) Link to JavaDoc page 2. Methods (i) Na
-
I can not access the movie I rented
I tried to rent iron man 3 tonight on Apple TV, when I went to play it I was told I already rented this movie and I needed to got to Settings>Itunes Store>Check for Rentals but nothing is there. All I get is a wheel of death for the last hour trying