Statistics aggregation is not enabled

Hi,
in 10g R2, in OEM for a server I have this message :
Statistics data is not available because statistics aggregation is not enabled for the selected clientWhat should I enabled to have statistics aggregation ?
Thank you.

thank you :
SQL> select count(*) from DBA_ENABLED_AGGREGATIONS;
COUNT(*)
0client_id, is it the server name (windows machine , DB is on Win Server 2003) on which DB is installed ?
Regards.

Similar Messages

Warning ALSB Statistics Manager BEA-473007 Aggregator did not receive statistics from ...

Hi,
I am using cluster with osb_server1 and osb_server2. While starting the servers, I am facing below error on Managed Server(osb_server2) but only warning on Managed Server(osb_server1).
Warning on managed server1(osb_server1)
<Warning> <ALSB Statistics Manager> <BEA-473007> <Aggregator did not receive statistics from [osb_server2] for the aggregation performed for tick 1855320.>
Error on managed server2(osb_server2)
<Nov 24, 2011 11:23:00 AM UTC> <Error> <ALSB Statistics Manager> <BEA-473003> <Aggregation Server Not Available. Failed to get remote aggregator
java.rmi.UnknownHostException: Could not discover URL for server 'osb_server1'
at weblogic.protocol.URLManager.findURL(URLManager.java:145)
at com.bea.alsb.platform.weblogic.topology.WlsRemoteServerImpl.getInitialContext(WlsRemoteServerImpl.java:94)
at com.bea.alsb.platform.weblogic.topology.WlsRemoteServerImpl.lookupJNDI(WlsRemoteServerImpl.java:54)
at com.bea.wli.monitoring.statistics.ALSBStatisticsManager.getRemoteAggregator(ALSBStatisticsManager.java:291)
at com.bea.wli.monitoring.statistics.ALSBStatisticsManager.access$000(ALSBStatisticsManager.java:38)
Truncated. see log file for complete stacktrace
Please provide your solutions here.
Thanks

Hi,
I am using cluster with osb_server1 and osb_server2. While starting the servers, I am facing below error on Managed Server(osb_server2) but only warning on Managed Server(osb_server1).
Warning on managed server1(osb_server1)
<Warning> <ALSB Statistics Manager> <BEA-473007> <Aggregator did not receive statistics from [osb_server2] for the aggregation performed for tick 1855320.>
Error on managed server2(osb_server2)
<Nov 24, 2011 11:23:00 AM UTC> <Error> <ALSB Statistics Manager> <BEA-473003> <Aggregation Server Not Available. Failed to get remote aggregator
java.rmi.UnknownHostException: Could not discover URL for server 'osb_server1'
at weblogic.protocol.URLManager.findURL(URLManager.java:145)
at com.bea.alsb.platform.weblogic.topology.WlsRemoteServerImpl.getInitialContext(WlsRemoteServerImpl.java:94)
at com.bea.alsb.platform.weblogic.topology.WlsRemoteServerImpl.lookupJNDI(WlsRemoteServerImpl.java:54)
at com.bea.wli.monitoring.statistics.ALSBStatisticsManager.getRemoteAggregator(ALSBStatisticsManager.java:291)
at com.bea.wli.monitoring.statistics.ALSBStatisticsManager.access$000(ALSBStatisticsManager.java:38)
Truncated. see log file for complete stacktrace
Please provide your solutions here.
Thanks

Aggregator did not receive statistics from [sb03] for the current view

I'm receiving a warning message in a BEA Aqualogic Service Bus console "Aggregator did not receive statistics from [sb03, sb05, sb06, sb04, sb02, sb01] for the current view".
I don´t have any idea what is the root cause of this issue.
Thanks,
Norberto Enomoto

Norberto,
I've found this link with a list of SB Runtime Messages.
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/messages/alsb/kernel/l10n/ServiceDomainMBean.html
One of this refer to the problem you're having:
BEA-473051
Error: Aggregator did not receive statistics from servers for the current view
Description
     There is a communication failure between Aggregator server and other managed servers. One of the managed servers failed to send statistics to the managed server on which Aggregator is running.
Cause
     Communication failure between managed servers.
Action
     Wait for some time and try again.
Att.
José Compadre Junior
Edited by: user10076953 on 22/03/2010 11:09
Edited by: user10076953 on 22/03/2010 11:09

BEA-473013: Aggregation Server Not Available

Can anyone tell the reason for these messages that I observe (every 60 seconds) in the stdout logs?
<Dec 29, 2010 9:08:00 AM CST> <Error> <ALSB Statistics Manager> <BEA-473013> <Aggregation Server Not Available>
<Dec 29, 2010 9:09:00 AM CST> <Error> <ALSB Statistics Manager> <BEA-473013> <Aggregation Server Not Available>
The server is part a Weblogic 10.3.x cluster. Unfortunately, the documentation online does not provide a cause for this BEA error code - http://download.oracle.com/docs/cd/E15523_01/apirefs.1111/e14397/Statistics.html

May be this can help you
http://prabodh-mitra.blogspot.com/2011/02/aggregation-server-not-available.html

Input Ready Query is not enabling on Multi Provider...

Dear Folks,
I have created one Multi Provider which is having 3 info cubes, out of three info cubes. 2 Planning Cubes & 1 Normal Cube.
I have created one Aggregation Level on top of Multi Provider and created input ready query which is not enabling as a input for key figures.
Do you have any idea on this.
Thanks,
Venkat

Hi,
Please refer to the following link for more details on the same,
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/43/1d023a41130bd5e10000000a422035/content.htm
Check the following points to make your query as input enables,
1. Drill down or filter all the characteristics present in the query.
2. Check whether the "Open query in Change mode" is checked in Query properties.
3. Check whether your real time infocube is in "Plan mode"
4. Make sure that your planning cube is not locked by any other person when you are trying to open your query.
Regards,
Balajee
Edited by: Balajee Sivakumar on Jan 31, 2011 5:00 PM

Mercury CUDA not enabling when using NVIDIA GeForce GTX 285 on Apple Mac Pro after Mavericks install

Been using the same setup since CS5 with the Mercury CUDA running perfectly. After recent upgrade of OS X to 10.9 Mercury CUDA is no longer available and only lets me run with the OpenGL or software options. Im using a NVIDIA GeForce GTX 285 for apple computers. Here are the results for the GPUSniffer program in the latest Premiere Pro 7.1.0 files. The LAST line make me chucle because it the first on the list of supported card in the "cuda_supported_cards.txt" file. Anybody else seen this?
--- OpenGL Info ---
Vendor: NVIDIA Corporation
Renderer: NVIDIA GeForce GTX 285 OpenGL Engine
OpenGL Version: 2.1 NVIDIA-8.18.27 310.40.05f01
GLSL Version: 1.20
Monitors: 1
Monitor 0 properties -
   Size: (0, 0, 1920, 1080)
   Max texture size: 8192
   Supports non-power of two: 1
   Shaders 444: 1
   Shaders 422: 1
   Shaders 420: 1
--- GPU Computation Info ---
Found 1 devices supporting GPU computation.
OpenCL Device 0 -
   Name: GeForce GTX 285
   Vendor: NVIDIA (Apple platform)
   Capability: 1.2
   Driver: 1
   Total Video Memory: 1024MB
   * Not enabled by default because it did not match the named list of cards.

found a link from a couple of days ago on a creative cow forum post one of the poster saying they are from adobe stating this
Re: Mercury Playback Engine MacPro
by Peter Garaway on Nov 12, 2013 at 9:49:16 am
Hi Wendell,
Sorry for the inconvenience. NVIDIA is currently working on drivers that support CUDA on Mavericks 10.9 with some of the older NVIDIA cards such as the GTX 285 and the Quadro 4800.
For others interested, the Quadro 4000, K5000 and GTX 680 ect... work with CUDA in 10.9.
Best,
Peter Garaway
Adobe
Premiere Pro
I have latest CUDA drivers, so i guess i am just waiting till a proper update that have the fixes to support my card.

Why is the 'Choose icon...' button in the Options tab of the field property dialog box not enabled?

I am using Adobe Acrobat Professional XI running on Windows 8.
This “feature” has been bugging me for some time now. I remember it happening when I used Acrobat 9 Professional (Windows XP) and it is still happening in Acrobat XI Professional. I think I figured out a situation when I can reproduce this “feature” conistently and I hope someone fixes this.
Try the following and see what happens:
1. Acrobat Professional is not open.
2. Launch Word and start editing a document (or some other authoring tool that can generete PDF document).
3. After editing the document, generate a PDF version of the document.
4. Launch Acrobat Professional and edit the PDF document generated in 3.
5. Add a button.
6. View the button's properties.
7. Change the Fill Color property in the Appearance tab to none.
8. Change the Layout in the Options tab to Icon only.
Now here is what bugs be. Shouldn’t the 'Choose Icon ...' button be enabled? It is not enabled after step 8. It is possible that 'Choose Icon ...' button is enabled for some of you. I this case, it would be nice if at least one of you who experience the same bug say so in this thread so that Adobe doesn't think I am sending them on a wild goose chase.
I can enable it by selecting a different tab and then returning to the Options tab. A similar thing happens when reverting back from 'Icon only' to 'Label only' but I am not sure how to reconstruct a scenario for this one.
Here is the dialog box for one instance when I noticed the bug.
Regards,
John

You're right, it has been that way for a long time. I've never bothered reporting it as a bug since it's simple enough to deal with, but reporting it would be a reasonable thing to do.

BitLocker not Enabled on HP ElitePad 1000 G2

I have an HP ElitePad 1000 G2 that I am using MDT to apply our 8.1 x64 Update image. This task sequence works fine on all other systems on which it has run. On the ElitePad, when the task sequence completes, BitLocker is not enabled.
Running manage-bde-status returns:
Disk volumes that can be protected with
BitLocker Drive Encryption:
Volume C: [OSDisk]
[OS Volume]
    Size:                 115.58 GB
    BitLocker Version:    2.0
    Conversion Status:    Used Space Only Encrypted
    Percentage Encrypted: 100.0%
    Encryption Method:    AES 128
    Protection Status:    Protection Off
    Lock Status:          Unlocked
    Identification Field: Unknown
    Key Protectors:
        TPM
If I look in the BitLocker applet on the control panel, it says "OSDisk (C:) BitLocker is waiting for activation"
the ZTIBDE.log just stops at:
Attempting to intiate ProtectKeyWithNumericalP@ssword
<Message containing password has been suppressed>
A successful system shows:
Attempting to intiate ProtectKeyWithNumericalP@ssword
Success protecting Key with numerical p@ssword
If I click Turn on BitLocker in the control panel applet or run the following commands:
manage-bde -protectors -add c: -recoverypassword
manage-bde -on c: -recoverypassword
The recovery key protector is created and uploaded to AD and BitLocker shows as enabled.
Any ideas to why this is happening?

after some more investigation, I found the following article
http://netecm.netree.ch/blog/Lists/Posts/Post.aspx?ID=80 and adding the registry key referenced in the article fixed the issue.

Drill by is not enabled in BO 4.0 WebI report

Hi,
In one of my report I have to do Drill by. But when I right click on the dimension I am able to see only Drill Down that is enabled.
Drill by is not enabled. Please let me know how to enable Drill By in BO 4.0 WebI report.
Thanks in advance
Lavanya

Hai
Enable drill mode right in BOE 4.0
http://www.sdn.sap.com/irj/scn/web-intelligence40-elearning-all
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d0e40af9-0d6a-2e10-b58a-c4ecde511a6e
Thank u

Firefox plays video, but no sound. when I type about:plugins in location bar, it shows the firefox default plugin is not enabled. When I look at my plugins, it says it is enabled. I have uninstalled 3.6 and re-installed with the same result.

firefox plays video, but no sound. when I type about:plugins in location bar, it shows the firefox default plugin is not enabled. When I look at my plugins, it says it is enabled. I have uninstalled 3.6 and re-installed with the same result. Why do I have no sound. Computer plays I-tunes and all other sounds, just no web browser sounds.

Glad you seem to have sorted things out.
The warning about the warranty is light hearted, I think at one stage it warned "here be dragons" but also intended to make us think as it warns that making changes may produce problems.

Why firefox 3.6 downloads all of the files again after restartarting the browser from a website if the "clear history when Firefox closed" is not Enabled?

We have a corporate website, we officially support FF3, FF4, IE8 and IE9. Our web site is quite big, so we really need browser caching, first time page load is around 15 seconds. With files in the cache getting new page is less than a second.
Everything works perfect except with FF3. With FF4, IE8, IE9 if we are on the website, clicking everywhere is fast, the page is in the cache. If we restart the browser, it is still fast, it loads files from the cache.
But with FF3 we have a problem. Every time we restart the browser, it is loading the files again from the server, instead of using the local cache (checked with Firebug). I can reproduce the problem anytime, it is the same with every FF3 instances. I double checked, the "clear history when Firefox closed" option is not enabled.
Could you advise please how to use the local cache either after browser restart?
Thank you!
Chris

Just read that the default memory storage on FF is set to 5 mbs. You can up that by clicking on tools, advanced and overriding the default and set it to 50 mbs (if you use lots of tabs) or 10 mbs (if you use just a few).
I open a blank tab and clear the cache periodically, while I am working. I can have several tabs open and watch videos on Youtube, by doing this. Have you cleared your cache?
Since I have an older computer, I've also used CCleaner for years. I use it often, but always before signing off. You can get it free...search for CCleaner, download from Pirifoam free. I didn't change any of the settings and it clears crap left behind from uninstalling programs, clears all browsers at once of: cookies, history, passwords, etc. I love it!
I had freezing, before using the "open blank tab, clear the cache" thing. Now I have no problems. Plus, as I said...you can change the default memory usage for FF and that should help too.
Hope this helps! Good luck! :)

I can't use home sharing because it says Bonjour is not enabled. So I went to administrative tools and started it. Restarted my computer and home sharing still isn't working

I can't use home sharing because it says Bonjour is not enabled. So I went to administrative tools and started it. Restarted my computer and home sharing still isn't working

I have also tried repairing Bonjour in adminstrative tools and still a no go! Frustrated!!! Looking for another idea

Remote Desktop Connection - cannot proceed because authentication is not enabled

Hello,
I try to connect via RDP from a Windows Server 2008 R2 to another 2008 R2 Server.
I always get the error message.
The connection cannot proceed because authentication is not enabled and the remote computer requires than authentication be enabled to connect.
On the target machine the Remote Settings are set to:
Allow connections from computers running any version of Remote Desktop.
Firewall is disabled on both servers.
Therefor I do not understand why I get an error message, that authentication is required.
The target box is a nearly fresh syspreped machine with all current Hotfixes installed.
I already found a lot of people having that problem by using XP (old RDP client), but no one seems to have this problem when connecting from 2008 R2 to 2008 R2.
Thank you very much in advance for every hint.
BR
Matthias

Hi Matthias,
First I would like to confirm if you have deployed RDS (Remote Desktop Services) and you got the error, if so, please check this option
TS Configuration, >> RDP-Tcp Properties >> change the Security Layer to "Negotiate"
Then Recycle the TS Gateway service.
Refer to:
Unable to connect to Server using the Remote Web Workplace (RWW) Small Business Server 2008
If this issue has nothing to do with RDS, and I suppose you used the cmd "mstsc" to remote access. This issue may also occur because of the version of mstsc, please make sure it has been upgraded to the new version.
In addition, Did you have another newer server available like Server 2012? So we can test and try to use Server 2012 to remote access Server 2008 R2, and check if the issue persists.
If there is anything else regarding this issue, please feel free to post back.
If you have any feedback on our support, please click here.
Best Regards,
Anna Wang
TechNet Community Support

Since updating to Firefox 3.6.15, I can no longer print coupons from SmartSource. The error message is that Java is not detected. The check box is longer showing in the Options/Content of this version of Firefox, so I can not enable it.

# Question
Since updating to Firefox 3.6.15, I can no longer print coupons from SmartSource. The error message is that Java is not detected. The check box is longer showing in the Options/Content of this version of Firefox, so I can not enable it.

Same PC as I used to post the question. When I go to the "plug in check" page, it shows I am up to date and it is not disabled.
Java(TM) Platform SE 6 U24
Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers 1.6.0.24

Got error: Location Code is not enabled in the XML Gateway Server

Hi,
When I perform Compliance rule screening on GTM - Globel Trade Management,that I defined GTM as an Trading Partner on EBS R12.1.3,
GTM can send response to EBS,but I see the following error message via Transaction Monitor on EBS workflow:
[The Standard:OAG, Transaction Type:ITM , Transaction SubType:EXPORT_COMPLIANCE and Location Code GTM6.2 is not enabled in the XML Gateway Server. Pls check your Setup.]
On EBS,I defined an ITM Partner for GTM,named 'GTM6.2',according to the document created by you: ITM Setup.doc
and I also finished the following steps:
1. ITM Application Users
2.ITM Partner Service Types
3.ITM Parameter Setup
4.Order Type Creation: ITM Only
5.Customer Creation: create a customer named 'GTM6.2', also enter 'GTM6.2' as EDI Location
6.Define Transactions on XML Gateway as following:
<Header>:
Party Type: Customer
Transaction Type: ITM
Transaction Sub Type: EXPORT_COMPLIANCE
<External Transactions (Lines)>:
Standard Code: OAG
External Transaction Type: ITM
External Transaction Sub Type: EXPORT_COMPLAINCE
Queue: APPLSYS.ECX_IN_OAG_Q
7.Define Trading Partners on XML Gateway as following:
<Header>:
Trading Partner Type: Customer
Trading Partner Name: GTM6.2
<Trading Partner Details>:
Transaction Type: ITM
External Transaction Type: ITM
External Transaction Sub Type: EXPORT_COMPLAINCE
Map: WSHITEIN
Source Trading Partner Location Code: GTM6.2 (same as the value what defined in EDI Location for customer)
I think the combination of External Transaction Type, External Transaction Subtype, Standard Code,Source Trading Partner Location Code
should be existing once done above steps, I have no idea why the error prompted.
Does someone can tell how to trace the error?
Thanks,
Rambler

user12254038 wrote:
Can you send any supporting documents on ITM Setup? My client is implementing ITM for the first time and I wanted to know more details on how it works in R12.1.3 version of EBS?Oracle International Trade Management (ITM) Partner Integration: Specifications [ID 572524.1]
International Trade Management Integration [ID 259691.1]
How Can I Tell if International Trade Management is Installed or Not? [ID 742539.1]
What are the Required Setups for International Trade Management (ITM) Flows in Shipping Execution? [ID 782861.1]
What Patches Provide the Latest Fixes and Enhancements for ITM Adapter? [ID 465122.1]
How to Generate Debug Information From ITM Adapter for XML Processing [ID 738925.1]
How to Generate Debug File for International Trade Management (ITM) [ID 1294853.1]
Thanks,
Hussein

Statistics aggregation is not enabled

Similar Messages

Maybe you are looking for