Statistics cubes datasources

hello everyone . thanks for ur help earlier. i have assigned poins too .
i have problem . i have installed bw statistics cubes .i can see them modeling . i went to rsa5 selected tct nd the datasources transfred the datasources . i went to rsa6 and find the datasources are avalible. i have replicated them through ss.when i want to assign a datasource fro the infosource. i cant find the realavent datasources .instead it shows me all the other ds avalible. plz can anyone help me how to assign assign the datasources . how to find the ds for infosources.points will be rewarded. thanks in adavnce to you all

Hi,
I guess that you have installed statistics cubes from the business content with Grouping option = 'Only necessary objects'. Try to install them again. This time with Grouping = 'In datafow before and afterwards'. It will create infosources which you'll be able to assign to DS.
Best regards,
Eugene

Similar Messages

BW statistics cube "BW Data Slice"

Hi,
What is the use of the Statistics cube "BW Data Slice(0BWTC_C06)". I see that same datasource used for both the datargets BW Data Slice and Requests in the InfoCube (0BWTC_C07) but the standard infopackage selects only 0BWTC_C07 for update.
Also can anyone point me to some documentations where I can get the defination/meaning of the key figures for the Statistics multiprovider (0BWTC_C10). I have a requirement where I have to create custom statistics queries to report on overall BW performance, so I need to know what those key figures represents.
Thanks a lot

Hi BW,
Here u will find the reqd info for ur 0BWTC_C10
http://help.sap.com/saphelp_nw04/helpdata/en/d1/e81c3b85e6e939e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/b026dbac257c4495c9e9e901ed4d61/frameset.htm
Hope it helps
Majeed

BW Statistics cube

Hi All,
I have one issue related to doubling key figure results in the query. The cube data initially had deleted and reload the data. So I am straggling how to shown the Key figure double value. We are not able to reproduce the issue. I came know with BW Statistics we can check how loaded the data to the cube on that time and day and also about query Performance. Please let me know which BW Statistics cube I want to use and also let me know about characteristics and key figures.
Thanks in Advance
Ravi

Hi,
In ST03N Trnx -> goto BI workload from left hand menu and select the period (day/week/month) -> double click on the date (in case of day folder) - you will get analysis view in left bottom -> You can see Query Runtimes selected.
On the center of the screen -> first column is infocube -> (above it) click on aggregation -> select query -> you can find the queries total runtime under Total Runtime(s).
By following the above process, you can find out the query performance and also the cube statistics as well.
Hope this helps you!!
Regards
Sunil

How to create a copy cube from Business content statistics cube

Dear Experts,
I got a requirement to create the new cubes which is a copy of Business content statistics cubes.
Request you to let me know how can i create a copy cube from Business content cube. My doubt is,weather is't the same as normal customized cube creation by giving copy from option.....
Thanks in advance for your valuable assistance.
Regards,
Ramesh - Kumar.

for copying the cube whose copy is to be made should be available in infoprovider tab in modelling of RSA1.
first you have to install the business content cube ,so that it is found in the Info-providers tab in modelling .
for that,first go to business content option found in the modelling tab of t-code RSA1 .
find the cube and transfer it to the right and execute . It will be available in infoprovider tab of modelling .
then you can create a copy as we do normally .

Extracting PAGEID and Text Description from Statistics cube

Hi SDN Community,
Can anyone please confirm that the following approach to extract the PAGEID and its text is the only way to do so:
As i cannot find the PAGEID field in any of the 0BW* statistics cube, we will create an infoobject and add it to one of the cubes.
Then Map PAGEID from RSDDSTAT to Field: OBJID from Table RSZWOBJTXT
(This mapping between the tables RSDDSTAT and RSZWOBJTXT can then be used to retrieve the web page description from the field TXTLG)
Thank you for your assistance.
Simon

The PageID is not in the statistics cube

Is it possible to Enhance 0TCT_C* BI Statistics Cubes

Dear SDN's,
We successfully installed BI Statistics Cubes in our BI 7.0 system.
But we want Costcenter to be avilable in all the BI Statistics Reports.
Is it possible to enhance all 0TCT_C* cubes with costcenter.
Are we need to do enhancement for virtual cubes also i.e 0TCT_VC* (or) only enhancement to 0TCT_C* Cubes
Please let me know ASAP
Thanks and Kind Regards,
Lakshman Kumar G

Dear Priyanka,
I added costcentre as a navigational attribute to 0TCTUSERNM and made a transfer routine to Costcentre.
My client wants to see which user belongs to which costcentre and how much frequency he using the cubes or queries.
Please let me know which is the best option
(1) adding as a navigational attribute to info object
(2) enhancing and coding the 0TCT_C* cubes,
Thanks and Kind Regards,
Lakshman Kumar G

BW statistics cubes having data like earlywatch report?

Trying to create reporting similar to the snapshots on the earlywatch report section 2. Looking through the statistics cubes but have not found the items below. Any suggestions on where I might find these? Since earlywatch recognizes changes since last report run I am assuming this data is stored in tables somewhere?
The following table shows the relevant performance indicators in various system areas.
Area Indicators Value Trend
System Performance Active Users 26
Avg. Response Time in Dialog Task 515 ms
Max. Dialog Steps per Hour 1413
Avg. Response Time at Peak Dialog Hour 479 ms
Avg. Availability per Week 100 %
Database Performance Avg. DB Request Time in Dialog Task 206 ms
Avg. DB Request Time in Update Task 210 ms
Database Space Management DB Size 57.62 GB up
Last Month DB Growth 0.50 GB up
Hardware Capacity Max. CPU Utilization on DB Server 100 % steady
Max. CPU Utilization on Appl. Server 50 % up
For BW:
Area Indicators Value Trend

Hi dear,
sorry for your manager, but in order to have this kind of information (look at this std cube http://help.sap.com/saphelp_nw04s/helpdata/en/52/e91c3b85e6e939e10000000a11402f/content.htm ) you have to activate the BW statistics recording BEFORE (as you can read in the file I suggested you in the previous answer)...but this can be useful for the future!
Hope it helps!
Bye,
Roberto
...and remember that some point is always welcome !

BW statistics cube load does not finish

Hi Friends,
The BW statistics cube 0BWTC_C04 does not finish load for hours in the first run. It will be in running status. When we delete the request by forcing the status to red and run the load, it finishes sucessfully in minutes. It is happening for last 2 months daily. Any clue why this is happening and how to correct it?
Thanks and regards,
Balaraj

Hi Arun,
Thanks for reply.
We are dropping and recreating the indices everytime we load. We are doing this through Process chain. We did drop the cube (deleted all the data) and reloaded, after 2nd run again the issue appeared.
Any suggestions?
Thanks and regards,
Balaraj

Effect on BW Storage Capacity when BW statistics cubes are activated

Hi..
When BW statistics(technical content) is activated, is there a large effect on the BW storage capacity? As of now we are less space in BW(available is 20 GB), I want to know how much space these technical content will occupy so that I can decide if to activate them or not.
Is there any good document which shows the sizing estimate of activating the technical content.
Thanks,
Sai.

A.H.P. and Buddhi have already provided what you need to know.
Coupe of other tidbits -
RSDDSTATAGGRDEF is the largest of the tables, as it is collecting InfoObject usage for each navigation. It gets loaded to the 0BWTC_C03 cube.
The purge of the RSDDSTAT* tables, as Buddhi mentions allows you to specify a date to purge older data. It deletes data older than the specified date from all of teh RSDDSTAT tables. The process goes thru and runs a delete query table by table. It should generall be run off hours as it can result in some rather large delete queries.
You can also run selective deletions from the statistics cubes to only retain as much history as you need there.
This stuff is all pretty granular so you have to think about how long you need to retain it. I have created a ZBWTC_C51 cube that I load summarized data to from the 0BWTC-C02 cube. I retain history in the summary cube for a long time for mgmt reporting on query volume and performance trends at a monthly time grain. This lets me reduce the amount of history I retain the more detailed cubes. It really depends on what kinds of reporting you need to provide.

BW statistics cube are loaded from BWDclnt or ERDclnt ?

Hi all,
I have installed the cubes for statistics 0BWTC_C04 and 0BWTC_C02. I have also actiavted all the master data source srealted to these cubes and transaction datasource related to these cubes. Now my question is where do I load the data from since I see two sets of transfer rules and infopackges one from BW Clnt and one from R/3 clnt.
When i check for extraction in rsa6/rsa3 the transaction datasources come back with 0 records and when i check extraction (rsa3) for master datasources it gives me error saying "You can work only in clint 000".
So how do I proceed from here. Do i Have to make any setting on that cube or what is the next step i am not getting it ?
Thanks for help in advance.

Hi,
In ST03N Trnx -> goto BI workload from left hand menu and select the period (day/week/month) -> double click on the date (in case of day folder) - you will get analysis view in left bottom -> You can see Query Runtimes selected.
On the center of the screen -> first column is infocube -> (above it) click on aggregation -> select query -> you can find the queries total runtime under Total Runtime(s).
By following the above process, you can find out the query performance and also the cube statistics as well.
Hope this helps you!!
Regards
Sunil

Technical content : aggregate statistics cube info

Hi Experts,
can anyone let me know which cube should be used for aggregate statistics in BI7 ( 0TCT* ).
similar to the statistics from cube 0BWTC_C04.
Many Thanks,
Neeraj.

Hi ,
Please refer to the below link,
http://help.sap.com/saphelp_nw04/helpdata/en/72/e91c3b85e6e939e10000000a11402f/frameset.htm
Hope it helps,
Rgards,
Amit Kr.
Edited by: Amit Kr on Oct 13, 2009 2:39 PM

BW Statistics Cube is not Getting Data

Hi All,
I have installed BW statistics first time and every thing goes fine , it activated succesfully.
But when i checking in the indivisually in every cube, not getting any request, as well as none of the Technical contained query giving Out put,
But I can trace it in the ST03.
So please let me know where i made mistake during installation of BW statistics.
Regards
Prem

Hi Premanshu;
You can do the Init manually this way you will also see if the data load is working or not...and in the process chain infopackage include it for delta laod.
The frequency of the data load for stat cube depends on your systems and how much the accuracy the users wants from the RSDDSTAT* table. We have the process chain to load the stat cube on weekly basis...this should be enough.
Assign the points if these answers helps.
thanks.
BK

CRM workload and statistics cube

Hi All,
     Tx: ST03N gives the work load statistics in CRM. i need to create a cube in BW for the same crm statistics reporting.
on which tables do i need to create data source in crm for extraction. or is there any sap extractor which i can use.
please advice.
Thanks
Kumar

here you go...
SAPBWPRFLS                     BW Workload: Relation of Workload Profile and
                                            Class Names
SAPWLDMTHD                     SAP Workload: Dynamically-Called Method for
                                            Events
SAPWLROLED                     SAP Workload: Storage of User-Specific ST03N
                                            Role
SAPWLROLES                     SAP Workload: Table for User-Specific Parameters
SAPWLTREEG                     SAP Workload: Nodes for ST03G Tree Controls
SAPWLTREET                     SAP Workload: Text Field for ST03G Trees
SGLWLCUST1                     User Parameters for Workload Transactions
SGLWLPRFLS                     SAP Workload: Profile Codes and Class Names
SGLWLSLIST                      SAP Workload: User-Specific System List for Global
                                          Analysis
Julius

BI Statistics: Cube 0TCT_C01: Error when loading deltas

Good morning
I have searched SDN and could not find a solution for the following problem.
We are currently loading BI Statistics to all the 0TCT* cubes. All went well for a week or two.
The process chain "Query Runtime Statistics - Delta" where cube 0TCT_C01, "Front-End and OLAP Statistics (Aggregated)" is loaded with a Delta is failing due to an error that I cannot solve. All other '0TCT*' cubes are loading fine.
Error in 0TCT_C01::
"Error occurred in the data selection "
Job terminated in source system > Request set to red"
There are no short dumps in ST22, nor are there any jobs in BW that can shed any light on this error.
What can be the problem that 0TCT_C01 is no longer getting data from the myself system?
Thanks in advance.
Have a nice day
Cj

Hi Cornelious,
Did you check SM21 system as well logs . May there is a clue in there
regards
Kulmohan

BI Statistics: Cube 0TCT_C01: 0TCTQUCOUNT and 0TCTWTCOUNT

I am no BW specialist so I am sorry if this question may seem somewhat strange.
The InfoCube 0TCT_C01 contains among others these key figures:
0TCTQUCOUNT: This key figure contains the number of BI application objects (query, query view, and so on).
0TCTWTCOUNT: This key figure contains the counter for the BI applications (Web template, workbook).
For whatever that means. The SAP documentation is extremly cryptic and snippy on this part.
Anyway, when I try to correlate 0TCT_C01 contents with the data in RSDDSTAT_OLAP, I get these best matches:
0TCTQUCOUNT is equivalent to event 000002500 Generation of a Cache Entry
0TCTWTCOUNT is equivalent to event 000019912 Load 3.x Web Reporting Template
Are my findings correct? And are these correlations somehow documented by SAP? There is some mapping available between SAP BW 3.x and SAP NW 7.0 statistics, but no useful information about 0TCTQUCOUN and 0TCTWTCOUN:
[Migration Details|http://help.sap.com/saphelp_nw70ehp1core/helpdata/en/e8/89c6c8ce594faba99a917fe2e3db90/content.htm]
Edited by: Mark Foerster on Jun 22, 2011 2:21 PM

Hi Cornelious,
Did you check SM21 system as well logs . May there is a clue in there
regards
Kulmohan

Statistics cubes datasources

Similar Messages

Maybe you are looking for