Statistics-Relevant Delivery Date is getting blank

Hi All,
We recently upgraded SAP from 4.7 to ECC(6.0), Now when are trying to change the delivery date on Purchase order,After the delivery date is changed the statistical delivery date disappears, are we missing any configuration steps , need help
thanks

cehck this thread: Statistical delivery date in Purchase Order

Similar Messages

Preventing Statistics-Relevant Delivery Date

Our vendor and transport compani often change delivery date and we have to change it in purchase orders to send correct data into MRP.
But purchase managers want to get information obout initial delivery dates.
As I understand "Statistics-Relevant Delivery Date" is used for this purpose. But when I chage delivery date Statistics-Relevant Delivery Date is changed also. According to HELP this date must not chaged.
My question is how to fix

Dear,
If the purchase order outputted to vendor, the statistical delivery date will not be changed in purchase order even you change delivery date, since its important for vendor evaluation.
With the second anser to this thread, through version management for purchase orders you can track the changes. Try this as I am not sure.
Regards,
Syed Hussain.

Statistics-relevant delivery date

Hi Experts,
While creating a order in APO system , a STO is getting generated IN R/3 .
In R/3 , I want to change ( Statistics-relevant delivery date ) of the perticular STO .
is there any badi / exits available where i can modify the ( SLFDT - Statistics-relevant delivery date ) , while generating STO in R/3.
Thanx in Advance ,
Pradipta

the statistic delivery date is used for vendor evaluation.
if the PO is not transmitted to the vendor, then SAP changes the statistical delivery date along with the delivery date, as at this time the vendor cannot be guilty for the delivery date change because he did not even know the old delivery date.
if the PO was transmitted, then SAP does not change the statistical delivery date automatically while the delivery date is changed.
The buyer has to start thinking who is responsible for delivery date change, if it is the vendor, then it is just okay that the statistical delivery date is not changed automatically. the vendor will be valuated against the unchanged statistical delivery date .
If your planner wants an new delivery date, then it is not the vendors fault, in this case the buyer has to change the statistical delivery date manually equal to the delivery date, so that the vendor evaluation is done against the new statistical delivery date .

Statistics Relevant Delivery Date in ME38

Hi Gurus,
i have a question regarding changing the delivery date in Tx ME38.
When I change the delivery date manually the statistic relevant delivery date is set to blank automatically.
The SAP Help says that the date should remain unchanged and thats what we want.
SAP Help Text:
If it becomes known that the vendor can only deliver ordered goods some
days later than originally stipulated, for instance, you can change the
delivery date accordingly for materials planning and control purposes.
However, the statistics-relevant delivery date remains unchanged.
As a result, the vendor's "on-time delivery performance" score worsens.
At the same time, it is ensured that materials planning and control works
on the basis of the right date.
Many thanks in advance for your help.
Best regards
Georg

Hi Jürgen,
in the Include MM06EFET_ETT_FUELLEN there is following coding:
IF NOT im_sd_scheduling IS INITIAL.
PERFORM ett_sd_scheduling USING 'X' 'X' eket *eket
CHANGING eketdata_sd.
In the FORM ETT_SD_SCHEDULING
there is the following coding:
Datum oder Uhrzeit geändert --> Versandterminierungsdaten zurücksetzen
CLEAR c_eketdata_sd.
Lieferdatum und Uhrzeit setzen
c_eketdata_sd-eindt = i_eketn-eindt.
c_eketdata_sd-uzeit = i_eketn-uzeit.
So the internal table c_eketdata_sd is cleared and only the delivery date and time are updated, but not the statistc relevant date.
It seems to me like standard behaviour of SAP.
Best regards
Georg

Statistics Relevant Delivery Date on purchase order

Gentlemen
Please I need your help with this scenario
1.We create a Request for Quotation (ME41) with delivery date 01.05.2010; a message for this action was created and sent.
2. We maintain last document (ME47) with Quotation info, this action includes the net price and update the delivery date to 10.05.2010. At this moment the system display a warning (Message no. 06273 u201CStatistics-relevant deliv. date will not be changed automaticallyu201D) and a new message is no created for this action.
3. After that, we create a Purchase Order by adopting last Quotation, and Delivery Date is fixed on 10.05.2010 but Statistics-Relevant Delivery Date is fixed in 01.05.2010.
We need the behavior that we describes as follows: Creating a Purchase Order by adopting a Quotation, Delivery Date and Statistics-Relevant Delivery Date on the Purchase Order must be copied from the updated date on the ME47 without sending a new message (for this case 10.05.2010); currently this last date is applied for delivery date but no for Statistics-Relevant Delivery Date.
Is possible to do this via customizing or SAP note or de we have to modify and exit?
Thanks in advance for your help
JM

Solution is content on sapnote_0001378481 PO Statistical delivery date determined by RFQ-schedule

SLFDT - Statistics relevant delivery date

Hi All,
Can you please let me know what exactly statistics relevant delivey date means?
Thanks

Hi
Statistics-Relevant Delivery Date is the Date for the calculation of the delivery time.
Calculation of the delivery time is an element in the determination of a vendor's adherence to delivery dates (that is, the vendor's delivery timeliness, or on-time delivery performance) in MM Vendor Evaluation.
If it becomes known that the vendor can only deliver ordered goods some days later than originally stipulated, for instance, you can change the delivery date accordingly for materials planning and control purposes. However, the statistics-relevant delivery date remains unchanged.
As a result, the vendor's "on-time delivery performance" score worsens. At the same time, it is ensured that materials planning and control works on the basis of the right date.
The system inserts the delivery date into this field in the following cases:
You do not enter a statistical delivery date.
You change the delivery date, have not entered a statistical delivery date, and the PO or scheduling agreement delivery schedule has not yet been transmitted to the vendor.
Thanks & Regards
Kishore

Statistics-Relevant Delivery Date is not copied

Hi,
when i tried to change delivery date of PO at item level , the Statistics-Relevant Delivery Date is not updated automatically with item level delivery date in delivery shedule, but delivery field is updated with item level delivery date .
Can anyone update this query if you have any idea.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Thanks
Ramakrishnaiah Y
Edited by: Alvaro Tejada Galindo on Sep 1, 2008 4:03 PM

Hi,
Here I checked in me22n with changing delivery date that time Stat.Del.Date is updating automatically in delivery schedule in item level with that same date.
U just check this with the help of ABAPer why this date is not changing.
Thanks,
Sanket.

Statistics-relevant delivery date and Committed date in Stock Transport Ord

Dear Friends,
Kindly tell me how the System Calculate the Statistics-relevant delivery date and Committed date in Stock Transport Order.
Thanks & Regards
T.Arulvanan

Hi Jürgen,
in the Include MM06EFET_ETT_FUELLEN there is following coding:
IF NOT im_sd_scheduling IS INITIAL.
PERFORM ett_sd_scheduling USING 'X' 'X' eket *eket
CHANGING eketdata_sd.
In the FORM ETT_SD_SCHEDULING
there is the following coding:
Datum oder Uhrzeit geändert --> Versandterminierungsdaten zurücksetzen
CLEAR c_eketdata_sd.
Lieferdatum und Uhrzeit setzen
c_eketdata_sd-eindt = i_eketn-eindt.
c_eketdata_sd-uzeit = i_eketn-uzeit.
So the internal table c_eketdata_sd is cleared and only the delivery date and time are updated, but not the statistc relevant date.
It seems to me like standard behaviour of SAP.
Best regards
Georg

ME23N and the statistics relevant delivery date(SLFDT)

The system allows this field to be entered with a value of 0707. This is a valid century year but it is so old it should not be allowed. The system just sends the message that it is an old date. Does anyone know how I can make the system issue an error message when the value is older than a set date or century/year? I have been told that the factory calendar is what it checks this value against but I have looked at all factory calendars and none of them show a "from century/year" field that goes back that far. Can anyone tell me how I can set the system up so that is issues a "hard" error message when it encounters a date older than what is desired? Thanks

Hi,
You can check that using a field exit for SLFDT.You will need to create a field exit for this.( You can also put in your code inside any user-exit before PO save too.)
Get the valid factory calendar id. (Fn. Mod: FACTORY_CALENDAR_GET will give you all the factory calendar ids...)
You can check the validity of this factory calendar against TFACD table and issue an error message if the year is not in the limit.
Hope this helps.Let me know if you need any help in this.
Regards
Deepu.
Reward if it helps.

PO delivery schedule "Statistics-relevant delivery"

Hi,
Please suggest PO item level delivery schedule tab- "Statistics-delivery date" how it get influence in PO and specific funtion for this. if we are changing delivery date and not changing this after Printout any where will cause problem.
JACK

Hi
The system uses the statistics-relevant delivery date in the purchase order and the goods receipt date to calculate date variances.
You use the statistics-relevant delivery date, for example, if you know that the vendor will not deliver the material as scheduled on September 15 but on September 30. Enter the delivery date as September 30, but enter the statistics-relevant delivery date as September 15.
In calculating the score for on-time delivery performance, the system will then not use the actual delivery date, but the statistics-relevant delivery date. This has a negative effect on the score for this goods receipt.However, materials planning and control uses the realistic delivery date (September 30) which the vendor will actually adhere to.
Regards

In VA01 In Schedule line Delivery date not getting populated

Hello,
We have developed enhancement for VA01 tcode.
Depending upon the quatity entered for a material it should show one more item as free good.
If quatity is 10 for a line item 10 then it should show item 20 by default same mateerial and quatilty as 1.We have done this it is working fine.
But if we select free good item in our case it is 20 and click on schedule line item buttom all quaitity fields getting populated.but delivery date not getting populated for only free good.for line item 10 it showing properly.
Can any one please suggest what i need to do in order to display delivery date for free good.
Thanks in advance.
Regards.

Thanks for your response.
Actually i have seen technical settings for that field.it is rv45a-etdat.this field has value till MV45AFZZ.seen in debugger.
Looks like it is clearing some where after the above include.Any suggisitions welcome.Thanks again.

Statistical-relevent delivery date not showing up in PO after upgrad to ECC

Hi Gurus,
After upgrade to ECC, Statistical-relevant delivery date (PO Item details --> delivery schedule tab) is not showing up when I convert PR to PO from Stock requirements list(MDO7).
Could you please help me out this issue.

Maintain the item category in your material master at sales organisation level and try again.
Also Please Check the delivery item category determination in trxn code 0184 there you define which item category is to be found for the combination of delivery type NL and item category group.
Regards,
Ashok
Edited by: Ashok Kumar Telikula on Aug 27, 2008 2:35 PM

Delivery Date should be blank in ME51N

Hi,
We want Delivery Date as Blank & Mandatory in ME51N - PR Creation.
I have already tried with T.code OMI8, where we removed Processing time required field value as 0 under External Procurement but from this, Delivery Date is showing same date as PR Date.
Please guide, how to do this field as Blank....

Hi,
   If you want the user to input the delivery date, then you may check the following option.
1. Go to ME51N and go to personal settings and go to default values tab.
2. Maintain the delivery date as any past date as shown below and save.
3. Now, go to the path: OLME - Environment Data - Define Attributes of System Messages - System messages. Here, maintain the message ME 039 as error message E as shown below:
4. Create a new PR in ME51N and check the system behavior.
      System will always propose the delivery date mentioned in the personal settings (even though you maintain different PDT or purchase processing time). Since we maintained a past date as the default date, system will propose the past date and immediately the error message ME039 will be triggered. So the user will be alerted and he has to change the delivery date.
       Please note that the personal settings is at user level and you have to maintain the same settings for all the relevant users.
       If the above option is not suitable, you may go for development. You may check the BAdI: ME_PROCESS_REQ_CUST
Regards,
AKPT

In which table the PO delivery dates will get stored

Hi,
when I tae report for Plant I get the Delivery date different from that of the delivery date mentioned in the PO. Could any one sugget me where from the delivery date is picked up and what all the combination is of Delivery date.
Best Regards
Sridhar.k

Hi
check following link you will get details
[http://help.sap.com/saphelp_sm32/helpdata/en/8d/bc383fe58d5900e10000000a114084/content.htm]
Regards
Kailas ugale

Delivery date not getting transferred while running BAPI_PO_CREATE1

Hi Experts,
I am passing the delivery date item level delivery schedule to the function module
BAPI_PO_CREATE1. But it's not taking it in.The new PO is gettinig created with blank delivery date. I implemented the OSS notes 858316 & 890901 with no luck in this matter.
Please help.
Regards
Navin

Hi JJ
BADI BBP_DOC_CHANGE_BADI- BUS2201 . while creating PO try to validate them if you are in ecs mode
i believe standard SAP dont recalculate delivery date while creation of PO.
regards
Muthu

Statistics-Relevant Delivery Date is getting blank

Similar Messages

Maybe you are looking for