Statistics Relevant Delivery Date on purchase order

Gentlemen
Please I need your help with this scenario
1.We create a Request for Quotation (ME41) with delivery date 01.05.2010; a message for this action was created and sent.
2. We maintain last document (ME47) with Quotation info, this action includes the net price and update the delivery date to 10.05.2010. At this moment the system display a warning (Message no. 06273 u201CStatistics-relevant deliv. date will not be changed automaticallyu201D) and a new message is no created for this action.
3. After that, we create a Purchase Order by adopting last Quotation, and Delivery Date is fixed on 10.05.2010 but Statistics-Relevant Delivery Date is fixed in 01.05.2010.
We need the behavior that we describes as follows: Creating a Purchase Order by adopting a Quotation, Delivery Date and Statistics-Relevant Delivery Date on the Purchase Order must be copied from the updated date on the ME47 without sending a new message (for this case 10.05.2010); currently this last date is applied for delivery date but no for Statistics-Relevant Delivery Date.
Is possible to do this via customizing or SAP note or de we have to modify and exit?
Thanks in advance for your help
JM

Solution is content on sapnote_0001378481 PO Statistical delivery date determined by RFQ-schedule

Similar Messages

How to block the Statistical delivery date in purchase order from updation

Hello All,
We have the following requirement from our client.
The client wants to track the delay in delivery of purchase orders raised to vendors. Currently the users, change the delivery date and then process the PO if there are any delays. The client wants to STOP this and track any changes being made.
We created a new screen layout for purchase orders and checked the Statistics relevant delivery date as DISPLAY
However, when we tested the same, the statistical delivery date was changed along with delivery date, when the delivery date was changed in the Purchase order, though the option for statistical delivery date was seen a DISPLAY field only.
Please provide us your suggestions on any other options available.
R's
Manoj.

if your client wants to track the delay of a delivery from your vendor, then he has to give the vendor a chance that he can deliver on time. And the usual way to do this is by sending the PO to the vendor.
if you cange the delivery date before output of messagem then your vendor could not even know the original delivery date, so it is not the vendors fault if he cannot meet this date.
if you change the delivery date after output of message , then the statistical delivery date will stay with the old date.
the field is always open to maintain because it is not always the vendor who is reponsible for a delivery date change.
if you want to change the delivery date because you can take the quantity at that date, then it is not the vendors fault, in this case you have to change the statistical delviery date to evaluate the vendors delivery performance against the new date.
And often forgotten in this evaluation process is the warehouse personell that finally posts the goods receipt. if they post it with delay and do not change the goods reeipt date, then the vendor is as well evaluated to bad.

Preventing Statistics-Relevant Delivery Date

Our vendor and transport compani often change delivery date and we have to change it in purchase orders to send correct data into MRP.
But purchase managers want to get information obout initial delivery dates.
As I understand "Statistics-Relevant Delivery Date" is used for this purpose. But when I chage delivery date Statistics-Relevant Delivery Date is changed also. According to HELP this date must not chaged.
My question is how to fix

Dear,
If the purchase order outputted to vendor, the statistical delivery date will not be changed in purchase order even you change delivery date, since its important for vendor evaluation.
With the second anser to this thread, through version management for purchase orders you can track the changes. Try this as I am not sure.
Regards,
Syed Hussain.

Source inspection before 365 days of delivery date of purchase order

Hi Experts,
Business wants to create source inspection lot well in advance before 365 days of delivery date of purchase order. this lot is required to record results.
In SAP, transaction code QA51 allows only two digit characters for 'number of days for opening period' so system is not creating inspection lot for more than 99 days delivery date from current date.
Please advise.

Hi Patel, I really got interested on this particular issue because we have been using source inspection in our company for a while. After some investigation on ABAP code of report I will share with you my fact findings:
1) System calculates the start date of source inspection (delivery date from PO - Leadtime from q-info record). For example, in my test case it was 14.08.2015 - 0 days. So field g_datum below will be 14.08.2015:
2) System then checks if you are running the report in background (highlighted in yellow above). If so then it will check if the start date of inspection (g_datum) falls on opening horizon (g_datum_eroff). The opening horizon is calculated as per formula below (system login date + opening period). As an example: 14.08.2014 + 30 days = 13.09.2014.
Default opening period (p_eroff) is 30 days:
3) So all-in-all, when you are running QI07 online you´ll get a yellow traffic light on the long leadtime PO but you will be able to process it (on-line). However if you run the report in background (job scheduling) system will only create inspection lot to the relevant POs if the PO's delivery date falls on the 30 days window based upon the current date.

SLFDT - Statistics relevant delivery date

Hi All,
Can you please let me know what exactly statistics relevant delivey date means?
Thanks

Hi
Statistics-Relevant Delivery Date is the Date for the calculation of the delivery time.
Calculation of the delivery time is an element in the determination of a vendor's adherence to delivery dates (that is, the vendor's delivery timeliness, or on-time delivery performance) in MM Vendor Evaluation.
If it becomes known that the vendor can only deliver ordered goods some days later than originally stipulated, for instance, you can change the delivery date accordingly for materials planning and control purposes. However, the statistics-relevant delivery date remains unchanged.
As a result, the vendor's "on-time delivery performance" score worsens. At the same time, it is ensured that materials planning and control works on the basis of the right date.
The system inserts the delivery date into this field in the following cases:
You do not enter a statistical delivery date.
You change the delivery date, have not entered a statistical delivery date, and the PO or scheduling agreement delivery schedule has not yet been transmitted to the vendor.
Thanks & Regards
Kishore

Statistics-relevant delivery date

Hi Experts,
While creating a order in APO system , a STO is getting generated IN R/3 .
In R/3 , I want to change ( Statistics-relevant delivery date ) of the perticular STO .
is there any badi / exits available where i can modify the ( SLFDT - Statistics-relevant delivery date ) , while generating STO in R/3.
Thanx in Advance ,
Pradipta

the statistic delivery date is used for vendor evaluation.
if the PO is not transmitted to the vendor, then SAP changes the statistical delivery date along with the delivery date, as at this time the vendor cannot be guilty for the delivery date change because he did not even know the old delivery date.
if the PO was transmitted, then SAP does not change the statistical delivery date automatically while the delivery date is changed.
The buyer has to start thinking who is responsible for delivery date change, if it is the vendor, then it is just okay that the statistical delivery date is not changed automatically. the vendor will be valuated against the unchanged statistical delivery date .
If your planner wants an new delivery date, then it is not the vendors fault, in this case the buyer has to change the statistical delivery date manually equal to the delivery date, so that the vendor evaluation is done against the new statistical delivery date .

Statistics Relevant Delivery Date in ME38

Hi Gurus,
i have a question regarding changing the delivery date in Tx ME38.
When I change the delivery date manually the statistic relevant delivery date is set to blank automatically.
The SAP Help says that the date should remain unchanged and thats what we want.
SAP Help Text:
If it becomes known that the vendor can only deliver ordered goods some
days later than originally stipulated, for instance, you can change the
delivery date accordingly for materials planning and control purposes.
However, the statistics-relevant delivery date remains unchanged.
As a result, the vendor's "on-time delivery performance" score worsens.
At the same time, it is ensured that materials planning and control works
on the basis of the right date.
Many thanks in advance for your help.
Best regards
Georg

Hi Jürgen,
in the Include MM06EFET_ETT_FUELLEN there is following coding:
IF NOT im_sd_scheduling IS INITIAL.
PERFORM ett_sd_scheduling USING 'X' 'X' eket *eket
CHANGING eketdata_sd.
In the FORM ETT_SD_SCHEDULING
there is the following coding:
Datum oder Uhrzeit geändert --> Versandterminierungsdaten zurücksetzen
CLEAR c_eketdata_sd.
Lieferdatum und Uhrzeit setzen
c_eketdata_sd-eindt = i_eketn-eindt.
c_eketdata_sd-uzeit = i_eketn-uzeit.
So the internal table c_eketdata_sd is cleared and only the delivery date and time are updated, but not the statistc relevant date.
It seems to me like standard behaviour of SAP.
Best regards
Georg

Statistics-relevant delivery date and Committed date in Stock Transport Ord

Dear Friends,
Kindly tell me how the System Calculate the Statistics-relevant delivery date and Committed date in Stock Transport Order.
Thanks & Regards
T.Arulvanan

Hi Jürgen,
in the Include MM06EFET_ETT_FUELLEN there is following coding:
IF NOT im_sd_scheduling IS INITIAL.
PERFORM ett_sd_scheduling USING 'X' 'X' eket *eket
CHANGING eketdata_sd.
In the FORM ETT_SD_SCHEDULING
there is the following coding:
Datum oder Uhrzeit geändert --> Versandterminierungsdaten zurücksetzen
CLEAR c_eketdata_sd.
Lieferdatum und Uhrzeit setzen
c_eketdata_sd-eindt = i_eketn-eindt.
c_eketdata_sd-uzeit = i_eketn-uzeit.
So the internal table c_eketdata_sd is cleared and only the delivery date and time are updated, but not the statistc relevant date.
It seems to me like standard behaviour of SAP.
Best regards
Georg

How to execute availability check against delivery date in purchase order

Hi all
In MD04, I know that "available date = delivery date in purchase order + GR processing time" & "GR date = delivery date in purchase order". When I execute availability check in production order, I will get material's committed date = available date. But I hope to get material's committed date = GR date in purchase order.
For example. delivery date in purchase order is 2012/02/06 and GR processing time is 2 days. After ATP in production order, I will get committed date 2012/02/08. But I hope it show 2012/02/06. How to customize it.
(The GR processing time must be set 2 days for MRP calculation. it can be changed to 0.) Thanks!!

Hi Rita,
One Doubt, If you say that material commited has to be the GR date and you do not wish to wait for GR processing time, then why do you have the GR processing time in first place.
For ex. My client, we get the stock as per GR in Quality inspection and so we have GR processing time considered for available time in MD04. But since the business considers the Inspection stock as avialble, The stock gets reflected in avialibility check the moment GR is done.
So please explain your requirement in detail. There could some way to do so. If not the raise an issue with SAP.

Delivery date in Purchase Order Header

Hi all,
In which table is Delivery date in Purchase Order Header stored.
the screen field name is eeind.
Thanks

Table EKET, Field EINDT or LPEIN try to look from se11 or se16n
reward point if correct

Delivery date in Purchase Order in the item overview

Hi all,
In which table is Delivery date in Purchase Order in the item overview stored.
the screen field name is eeind.
Thanks

In table EKET in field EINDT the delivery date is stored, based on the Schedule lines in the PO Item

Fixed Day in a week as Delivery date in Purchase Order.

Dear All
I have the below requirement
For a material/ vendor combination users would like see always a fixed day as delivery date in Purchase Order.
For example for a Material X and Vendor Y always Wednesday of the week should be delivery date.
Whether this can be achieved ?
Can you please let me know your thoughts on this
Regards
Shyam

Dear Jurgen
Thanks for referring to the post.
But actually my requirement is bit more specific. For material-vendor combination the deleivery date should be a particular day in a week
Ex : Material X and Vendor X1 = Monday
Material Y and Vendor Y1=Tuesday
This requirement I believe is quite difficult in achieving for a PR from MRP. That's why I put the question as whether we can achieve this when we convert the MPR PRs to PO s ?
Please let me know your thoughts on this
Regards
Shyam

Statistics-Relevant Delivery Date is not copied

Hi,
when i tried to change delivery date of PO at item level , the Statistics-Relevant Delivery Date is not updated automatically with item level delivery date in delivery shedule, but delivery field is updated with item level delivery date .
Can anyone update this query if you have any idea.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Thanks
Ramakrishnaiah Y
Edited by: Alvaro Tejada Galindo on Sep 1, 2008 4:03 PM

Hi,
Here I checked in me22n with changing delivery date that time Stat.Del.Date is updating automatically in delivery schedule in item level with that same date.
U just check this with the help of ABAPer why this date is not changing.
Thanks,
Sanket.

Statistics-Relevant Delivery Date is getting blank

Hi All,
We recently upgraded SAP from 4.7 to ECC(6.0), Now when are trying to change the delivery date on Purchase order,After the delivery date is changed the statistical delivery date disappears, are we missing any configuration steps , need help
thanks

cehck this thread: Statistical delivery date in Purchase Order

Selection of a price list based on the delivery date of purchase orders

Description of requirement:
One of our customers would like to have the price list selected on the basis of the delivery date of purchase orders rather than on the posting date.
The customer wants to have this feature available by the date scheduled for their go-live, that is January 2nd 2008.
Best regards,
Emmanuel Ruellan

Dear development team,
Is it possible to have the above functionality in a future version?
Best regards,
Emmanuel Ruellan

Statistics Relevant Delivery Date on purchase order

Similar Messages

Maybe you are looking for