Statistics-relevant delivery date

Hi Experts,
While creating  a order in APO system , a STO is getting generated IN R/3 .
In  R/3 , I want to change ( Statistics-relevant delivery date ) of the perticular  STO .
is there any badi /  exits available where i can modify the ( SLFDT - Statistics-relevant delivery date ) , while generating STO in R/3.
Thanx in Advance ,
Pradipta

the statistic delivery date is used for vendor evaluation.
if the PO is not transmitted to the vendor, then SAP changes the statistical delivery date along with the delivery date, as at this time the vendor cannot be guilty for the delivery date change because he did not even know the old delivery date.
if the PO was transmitted, then SAP does not change the statistical delivery date automatically while the delivery date is changed.
The buyer has to start thinking who is responsible for delivery date change, if it is the vendor, then it is just okay that the statistical delivery date is not changed automatically. the vendor will be valuated against the unchanged statistical delivery date .
If your planner wants an new delivery date, then it is not the vendors fault, in this case the buyer has to change the statistical delivery date manually equal to the delivery date, so that the vendor evaluation is done against the new statistical delivery date .

Similar Messages

  • Statistics Relevant Delivery Date on purchase order

    Gentlemen
    Please I need your help with this scenario
    1.We create a Request for Quotation (ME41) with delivery date 01.05.2010; a message for this action was created and sent.
    2. We maintain last document (ME47) with Quotation info, this action includes the net price and update the delivery date to 10.05.2010. At this moment the system display a warning (Message no. 06273 u201CStatistics-relevant deliv. date will not be changed automaticallyu201D) and a new message is no created for this action.
    3. After that, we create a Purchase Order by adopting last Quotation, and Delivery Date is fixed on 10.05.2010 but Statistics-Relevant Delivery Date is fixed in 01.05.2010.
    We need the behavior that we describes as follows: Creating a Purchase Order by adopting a Quotation, Delivery Date and Statistics-Relevant Delivery Date on the Purchase Order  must be copied from the updated date on the ME47 without sending a new message (for this case 10.05.2010); currently this last date is applied for delivery date but no for Statistics-Relevant Delivery Date.
    Is possible to do this via customizing or SAP note or de we have to modify and exit?
    Thanks in advance for your help
    JM

    Solution is content on sapnote_0001378481 PO Statistical delivery date determined by RFQ-schedule

  • SLFDT - Statistics relevant delivery date

    Hi All,
    Can you please let me know what exactly statistics relevant delivey date means?
    Thanks

    Hi
    Statistics-Relevant Delivery Date is the Date for the calculation of the delivery time.
    Calculation of the delivery time is an element in the determination of a vendor's adherence to delivery dates (that is, the vendor's delivery timeliness, or on-time delivery performance) in MM Vendor Evaluation.
    If it becomes known that the vendor can only deliver ordered goods some days later than originally stipulated, for instance, you can change the delivery date accordingly for materials planning and control purposes. However, the statistics-relevant delivery date remains unchanged.
    As a result, the vendor's "on-time delivery performance" score worsens. At the same time, it is ensured that materials planning and control works on the basis of the right date.
    The system inserts the delivery date into this field in the following cases:
    You do not enter a statistical delivery date.
    You change the delivery date, have not entered a statistical delivery date, and the PO or scheduling agreement delivery schedule has not yet been transmitted to the vendor.
    Thanks & Regards
    Kishore

  • Preventing Statistics-Relevant Delivery Date

    Our vendor and transport compani often change delivery date and we have to change it in purchase orders to send correct data into MRP.
    But purchase managers want to get information obout initial delivery dates.
    As I understand "Statistics-Relevant Delivery Date" is used for this purpose. But when I chage delivery date Statistics-Relevant Delivery Date is changed also.  According to HELP this date must not chaged.
    My question is how to fix

    Dear,
    If the purchase order outputted to vendor, the statistical delivery date will not be changed in purchase order even you change delivery date, since its important for vendor evaluation.
    With the second anser to this thread, through version management for purchase orders you can track the changes. Try this as I am not sure.
    Regards,
    Syed Hussain.

  • Statistics-Relevant Delivery Date is not copied

    Hi,
    when i tried to change delivery date of PO at item level , the Statistics-Relevant Delivery Date is not updated automatically  with item level delivery date in delivery shedule, but delivery field is updated with item level delivery date .
    Can anyone update this query if you have any idea.
    <REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
    Thanks
    Ramakrishnaiah Y
    Edited by: Alvaro Tejada Galindo on Sep 1, 2008 4:03 PM

    Hi,
    Here I checked in me22n with changing delivery date that time Stat.Del.Date is updating automatically in delivery schedule in item level with that same date.
    U just check this with the help of ABAPer why this date is not changing.
    Thanks,
    Sanket.

  • Statistics Relevant Delivery Date in ME38

    Hi Gurus,
    i have a question regarding changing the delivery date in Tx ME38.
    When I change the delivery date manually the statistic relevant delivery date is set to blank automatically.
    The SAP Help says that the date should remain unchanged and thats what we want.
    SAP Help Text:
    If it becomes known that the vendor can only deliver ordered goods some
    days later than originally stipulated, for instance, you can change the
    delivery date accordingly for materials planning and control purposes.
    However, the statistics-relevant delivery date remains unchanged.
    As a result, the vendor's "on-time delivery performance" score worsens.
    At the same time, it is ensured that materials planning and control works
    on the basis of the right date.
    Many thanks in advance for your help.
    Best regards
    Georg

    Hi Jürgen,
    in the Include MM06EFET_ETT_FUELLEN there is following coding:
    IF NOT im_sd_scheduling IS INITIAL.
            PERFORM ett_sd_scheduling USING 'X' 'X' eket *eket
                                      CHANGING eketdata_sd.
    In the FORM ETT_SD_SCHEDULING
    there is the following coding:
    Datum oder Uhrzeit geändert --> Versandterminierungsdaten zurücksetzen
      CLEAR c_eketdata_sd.
    Lieferdatum und Uhrzeit setzen
      c_eketdata_sd-eindt = i_eketn-eindt.
      c_eketdata_sd-uzeit = i_eketn-uzeit.
    So the internal table c_eketdata_sd is cleared and only the delivery date and time are updated, but not the statistc relevant date.
    It seems to me like standard behaviour of SAP.
    Best regards
    Georg

  • Statistics-relevant delivery date and Committed date in Stock Transport Ord

    Dear Friends,
    Kindly tell me how the System Calculate  the Statistics-relevant delivery date and Committed date in Stock Transport Order.
    Thanks & Regards
    T.Arulvanan

    Hi Jürgen,
    in the Include MM06EFET_ETT_FUELLEN there is following coding:
    IF NOT im_sd_scheduling IS INITIAL.
            PERFORM ett_sd_scheduling USING 'X' 'X' eket *eket
                                      CHANGING eketdata_sd.
    In the FORM ETT_SD_SCHEDULING
    there is the following coding:
    Datum oder Uhrzeit geändert --> Versandterminierungsdaten zurücksetzen
      CLEAR c_eketdata_sd.
    Lieferdatum und Uhrzeit setzen
      c_eketdata_sd-eindt = i_eketn-eindt.
      c_eketdata_sd-uzeit = i_eketn-uzeit.
    So the internal table c_eketdata_sd is cleared and only the delivery date and time are updated, but not the statistc relevant date.
    It seems to me like standard behaviour of SAP.
    Best regards
    Georg

  • Statistics-Relevant Delivery Date is getting blank

    Hi All,
             We recently upgraded SAP from 4.7 to ECC(6.0), Now when are trying to change the delivery date on Purchase order,After the delivery date is changed the statistical delivery date disappears, are we missing any configuration steps , need help
    thanks

    cehck this thread: Statistical delivery date in Purchase Order

  • ME23N and the statistics relevant delivery date(SLFDT)

    The system allows this field to be entered with a value of 0707.  This is a valid century year but it is so old it should not be allowed.  The system just sends the message that it is an old date.  Does anyone know how I can make the system issue an error message when the value is older than a set date or century/year?  I have been told that the factory calendar is what it checks this value against but I have looked at all factory calendars and none of them show a "from century/year" field that goes back that far.  Can anyone tell me how I can set the system up so that is issues a "hard" error message when it encounters a date older than what is desired?  Thanks

    Hi,
    You can check that using a field exit for SLFDT.You will need to create a field exit for this.( You can also put in your code inside any user-exit before PO save too.)
    Get the valid factory calendar id. (Fn. Mod: FACTORY_CALENDAR_GET will give you all the factory calendar ids...)
    You can check the validity of this factory calendar against TFACD table and issue an error message if the year is not in the limit.
    Hope this helps.Let me know if you need any help in this.
    Regards
    Deepu.
    Reward if it helps.

  • PO delivery schedule "Statistics-relevant delivery"

    Hi,
    Please suggest PO item level delivery schedule tab- "Statistics-delivery date" how it get influence in PO and specific funtion for this. if we are changing delivery date and not changing this after Printout any where will cause problem.
    JACK

    Hi
    The system uses the statistics-relevant delivery date in the purchase order and the goods receipt date to calculate date variances.
    You use the statistics-relevant delivery date, for example, if you know that the vendor will not deliver the material as scheduled on September 15 but on September 30. Enter the delivery date as September 30, but enter the statistics-relevant delivery date as September 15.
    In calculating the score for on-time delivery performance, the system will then not use the actual delivery date, but the statistics-relevant delivery date. This has a negative effect on the score for this goods receipt.However, materials planning and control uses the realistic delivery date (September 30) which the vendor will actually adhere to.
    Regards

  • Statistical-relevent delivery date not showing up in PO after upgrad to ECC

    Hi Gurus,
    After upgrade to ECC, Statistical-relevant delivery date (PO Item details --> delivery schedule tab) is not showing up when I convert PR to PO from Stock requirements list(MDO7).
    Could you please help me out this issue.

    Maintain the item category in your material master at sales organisation level and try again.
    Also Please Check the delivery item category determination in trxn code 0184 there you define which item category is to be found for the combination of delivery type NL and item category group.
    Regards,
    Ashok
    Edited by: Ashok Kumar Telikula on Aug 27, 2008 2:35 PM

  • How to block the Statistical delivery date in purchase order from updation

    Hello All,
        We have the following requirement from our client.
    The client wants to track the delay in delivery of purchase orders raised to vendors. Currently the users, change the delivery date and then process the PO if there are any delays. The client wants to STOP this and track any changes being made.
        We created a new screen layout for purchase orders and checked the Statistics relevant delivery date as DISPLAY
    However, when we tested the same, the statistical delivery date was changed along with delivery date, when the delivery date was changed in the Purchase order, though the option for statistical delivery date was seen a DISPLAY field only.
    Please provide us your suggestions on any other options available.
    R's
    Manoj.

    if your client wants to track the delay of a delivery from your vendor, then he has to give the vendor a chance that he can deliver on time. And the usual way to do this is by sending the PO to the vendor.
    if you cange the delivery date before output of messagem then your vendor could not even know the original delivery date, so it is not the vendors fault if he cannot meet this date.
    if you change the delivery date after output of message , then the statistical delivery date will stay with the old date.
    the field is always open to maintain because it is not always the vendor who is reponsible for a delivery date change.
    if you want to change the delivery date because you can take the quantity at that date, then it is not the vendors fault, in this case you have to change the statistical delviery date to evaluate the vendors delivery performance against the new date.
    And often forgotten in this evaluation process is the warehouse personell that finally posts the goods receipt. if they post it with delay and do not change the goods reeipt date, then the vendor is as well evaluated to bad.

  • Fast change for statistical delivery date in me21n

    hi
    need fast change for statistical delivery date in me21n
    in me21n when i enter on to fast change screen i doesn't find statistical delivery date
    can anyone tell me the process
    thanks

    Dear Anudeep,
    You cannot change this via "Fast Change".
    Please see the usage of this field.
    Calculation of the delivery time is an element in the determination of a vendor's adherence to delivery dates (that is, the vendor's delivery timeliness, or on-time delivery performance) in MM Vendor Evaluation.
    If it becomes known that the vendor can only deliver ordered goods some days later than originally stipulated, for instance, you can change the delivery date accordingly for materials planning and control purposes. However, the statistics-relevant delivery
    date remains unchanged.
    As a result, the vendor's "on-time delivery performance" score worsens. At the same time, it is ensured that materials planning and control works on the basis of the right date.
    Regards,
    ian, Wong Loke Foong

  • Actual Delivery Date of a Purchasing Item

    Dear All,
        I would like to get the 'Actual Delivery Date for a Purchasing Item'. From which table can I get this data.
    Please give me the Field name and Table name.
    Thanks in Advance
    Regards,
    Lijo

    Hi
    check in table EKET - Scheduling Agreement Schedule Line
    enter the PO number
    Check the fields
    EINDT - Item Delivery Date
    SLFDT-  Statistics-Relevant Delivery Date
    Thanks & Regards
    Kishore

  • Workflow  for po delivery date

    Hi
    Good morning to all .
    Well I am an abaper and new in workflow . i got a requirement  to mail a user two day before po delivery date .
    can any one guid me .
    Regards
    Rakesh kumar singh

    I think if you are changing the Delivery date you can track this as the Change Event of BO BUS2012 gets triggered. You can track what type of change by coding in a virtual attribute of your Custom BO which is delegated to standard BO. In the attribute you should code that filter the changes are relevant(Delivery date change) for workflow or not. If the changes are relevant the Flag will be set. In the start condition(SWB_COND) of Wflow you should make use of this Flag for triggering.
    Regarding sending mail at end of day this can be done using Requested start Tab of step in Workflow Builder.
    Thanks
    Arghadip

Maybe you are looking for

  • The photo tab is missing in iTunes and i want to remove albums from my iPhone 4s

    for some reason all of my photos and albums have loaded onto my iphone 4s and taken up all of my storage and i cant delete them and the photo tab is no longer on my itunes so i cant sync them the way the consultant in the Apple store told me to do it

  • How do i change export dpi to 300 in Lightroom?

    I find when exporting tiffs or editing images in external editor from lightroom files are always at 240dpi but i want to use 300 dpi, how do i change this?

  • Cs3 not opening

    Recently, none of my CS3 programs can be opened.  At first I though there was an issue with my laptop since other weird things were happening.  I've had a major tune up done, uninstalled and reinstalled CS3 and still nothing.  The strange thing is th

  • Refreshing trinidad table from java code how to?

    my case jdev 11gR2 jspx: <tr:table ...>      <tr:column > <tr:commandLink partialSubmit="true" actionListener="#{backing.doDo}"...> <f:attribute name="tId" value="#{row.bindings.Id.inputValue}"/> </tr:commandLink> </tr:table> <tr:table value="#{bindi

  • What is the best way to get the delta records using DSS(Data Syncronus Task)?

    This document may be helpful: Incremental Loading with Informatica Cloud. The screenshots are a little out-of-date, but the content should still be useful.