Statistics report using ABAP- SXMB_MONI output

Dear all,
I would like to create an ABAP report which should giveme the details of one particular interface. The details are like How many messages processed, how many of them are success status and how many of them are in error status on daily basis.
Ideally this is like our SXMB_MONI output where we can choose Sender interface and time interval to get these details. But i want to have a daily job to run this query only for one interface.
Is it really possible? If yes, how?
Note: DO NOT SEND any links for SAP PI enhanced monitoring, Payload Search using ABAP report..etc. i had implemented this in my project:)
Thanks
Rajesh
Edited by: Rajesh on Jan 25, 2011 2:38 PM

Not sure if you already refered this
http://wiki.sdn.sap.com/wiki/display/Snippets/PIMonitoringFunctionality-FetchingDatafromSXMB_MONIStandardTables-PartIII
Regards,
srinivas

Similar Messages

Crystal report using ABAP from SAP ECC6.0 EHP 3.0

Hi Gurus,
Can i create crystal report using ABAP in SAP ECC 6.0 EHP 3 . as i am not able to see this link in SPRO.
IMG > SAP NetWeaver > Application Server > SAP List Viewer > Maintain SAP GUI Specific Settings.
Kindly guide me urgently.

http://help.sap.com/saphelp_slc/helpdata/en/27/c9ee1951fc4fb9ac322ac7e6fa7372/content.htm
If I understood your question correctly.
Have a look in the link above.
It is possible to use Crystal Reports from ALV.
Tammy Powlas also has some good guides on how to do this.
The ABAP however is not covered that much.
Best Regards
Ingrid

Hoe top create summary and detail report using ABAP QUERY

Hi ,
Can any one suggest me how to create summary and detailed report using ABAP Quey.
Regards,
Raghu.

Hi,
Table Declaration
tables:mara,mast.
*Declaring the internal table
data: begin of itab_new occurs 0,
      matnr like mara-matnr,     "Material No
      ernam like mara-ernam,     "Material Created by
      mtart like mara-mtart,     "Material Type
      matkl like mara-matkl,     "Material Desc
      werks like mast-werks,     "Plant
      aenam like mast-aenam,     "BOM created
      stlal like mast-stlal,     "Alternative BOM
      end of itab_new.
select-options: p_matnr for mara-matnr.
CODE A : Retrieving the data from the database
     select f~matnr f~ernam f~mtart f~matkl m~werks m~aenam m~stlal
     into table itab_new
     from mara as f inner join mast as m
     on f~matnr = m~matnr
     where f~matnr in p_matnr.
CODE B : Retrieving the data from the database.
    SELECT FMATNR FERNAM FMTART FMATKL MWERKS MAENAM M~STLAL
    INTO TABLE ITAB_NEW
    FROM MARA AS F INNER JOIN MAST AS M
    ON FMATNR = MMATNR
    WHERE F~MATNR = P_MATNR.
    SORT ITAB_NEW BY ERNAM.
loop at itab_new.
write:/5 itab_new-matnr,itab_new-ernam,itab_new-mtart,itab_new-matkl,itab_new-werks,itab_new-aenam,itab_new-stlal.
endloop.
*TABLES: MARA , MAST.
*DATA:BEGIN OF ITAB_NEW OCCURS 0,
             MATNR LIKE MARA-MATNR,
             ERNAM LIKE MARA-ERNAM,
             MTART LIKE MARA-MTART,
             MATKL LIKE MARA-MATKL,
             END OF ITAB_NEW.
   SELECT MATNR ERNAM MTART MATKL
   INTO TABLE ITAB_NEW
   FROM MARA
   WHERE MTART = 'T'
   ORDER BY MATNR ERNAM MTART MATKL.
*DATA: BEGIN OF ITAB OCCURS 0,
     MATNR LIKE MARA-MATNR,
     END OF ITAB.
Thank U,
Jay....

Open CR report using ABAP

Hi experts,
I publish a CR report to BOE. Can I open that CR report using ABAP? If it can, How to do it ?
Thanks

Hi Henry,
There is an environment for report layout designing. For a list of possible data sources, take a look at http://support.businessobjects.com/library/kbase/articles/c2001031.asp.
Also you can refer to the following ling for all CR related implementation in SAP:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/004aacbb-4983-2b10-8da7-cdff5dcbb948.
Hope it helps...

Generating a report using ABAP query

Hi All,
I want to generate a anlytical report using ABAP query, There are 3 different transactions/steps have to be executed to get this data in an actionable form.
1. MB52 - Unrestricted Stock
2. ZCustomquery - Custom query in SAP R3
3. Combine above two in a single report.
Please suggest me how can i proceed,
1. Example i have created query name called Finalrepot
2. How can i call above zcustomquery and Transaction (MB52) in the Query.
Thanks for your help
Pradeep

Hi,
Check below link to create ABAP query (SAP Query)
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Create_The_Query.asp
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf
Best regards,
Brijesh

Development of Reports using ABAP Query

Hi
can anyone please tell me about 'Development of Reports using ABAP Query' and how to use it in real time
Thanks
jay

look here:
http://help.sap.com/saphelp_47x200/helpdata/en/b7/26ddebb1f311d295f40000e82de14a/frameset.htm
A.

ALV Reports using Abap Objects ?

Hi All,
I am trying to print the values in my internal table using ALV, using ABAP classes and objects. Here i am able to get the total succesfully. but i need to get subtotals also, like based on the carrid in table sflight i need subtotal of price for every carrid like 'LH' , 'SQ'.
here is my code:
REPORT znav_report.
DATA: alv TYPE REF TO cl_salv_table,
value1 TYPE REF TO cl_salv_aggregations,
value2 TYPE REF TO cl_salv_aggregation.
DATA: BEGIN OF itab_flight OCCURS 0,
carrid LIKE sflight-carrid,
connid LIKE sflight-connid,
fldate LIKE sflight-fldate,
price LIKE sflight-price,
paymentsum LIKE sflight-paymentsum,
currency LIKE sflight-currency,
END OF itab_flight.
SELECT carrid
connid
fldate
price
paymentsum
currency
FROM sflight INTO TABLE itab_flight
WHERE carrid = 'LH' OR carrid = 'SQ'.
cl_salv_table=>factory( IMPORTING r_salv_table = alv
CHANGING t_table = itab_flight[] ).
CALL METHOD alv->get_aggregations
RECEIVING
value = value1.
CALL METHOD value1->add_aggregation
EXPORTING
columnname = 'PAYMENTSUM'
aggregation = if_salv_c_aggregation=>total
RECEIVING
value = value2.
alv->display( ).
here how to get subtotals for every different carrid.
regards,
Navneeth.K

Hi,
Make use of one of these statement,,,,
Either
(a) select carrid connid fldate price currency planetype into table itab_flight from sflight.
or
(b) select * into corresponding fields of table itab_flight from sflight.
(a) is better in performace than (b)
But before that, please note some performance related issues with OO Context...
1. When defining an Internal table, avoid occurs specification, It is Obsolete,Make use of Initial Size n.
2. Declare Workarea separately,since Internal table defined along with header line is Obsolete in OO Context.Its better and more robust to fill the itab and fetch the values from itab using a separate Workarea rather than the header line... So avoid header lines...
3. When defining an internal table, follow this way ....
 Define a Linetype (Field String) using the TYPES Statement
 TYPES: begin of ty_line,
 f1 type i,
 f2 type i,
 end of ty_line.
 Then define a Table type using TYPES Statement...
 TYPES: ty_lines type standard table of ty_line with default key.
"there is differnnce between line and lines..... make it clear..."
 Then after, define the internal table and its work area using DATA statement... as shown below..
DATA: i_lines type ty_lines,
 wa_lines like line of i_lines
This is the standard way of defining the internal table under OO Context.,,..
Your definition is creating a default header line....that should be avoided...
Thanks for ur patience,
Regards..
Mohammed Anwar..

FI Reports using ABAP and their Related Tables

Hi can anyone tell me some of the commonly developed reports from FI using ABAP and their related Tables.
Thank You

You can find the details about the FI module here
http://www.sap-img.com/sap-fi.htm
Regards,
Ravi
Note : Please mark all the helpful answers

Recruiters statistics report- using APPLICANT statistics report

Hi experts!,
I want to get the reports of the Personal officer ( recruiters) in Applicant Statistics report. But in the standard report I can choose only one personal officer and get the report. Could any one help me how to get the reports for all the personal officer ( for eg. 10 persons).
The standard report prg is : REPORT RPAPL005
could any one help me...
Thanks and regards,
Sunil

Thx for the reply,
Prakash, but I want a report which consists of name of the recruiter and their reports on applicatios...in applicants reports I tried but I can view overall view of the report but not like a report which displays the name of the personal officer and their report.
Could you please elaborate your help and let me know the solution.
regards,
Sunil

HR Report using ABAP OO

I am a classic HR ABAP programmer. I want to practice/learn more about ABAP OO. I would like to try and convert a classic HR program which uses the PNP logical DB and macros to retrieve HR infotype records to ABAP OO. I have searched some, but have not found a good example of converting an HR PNP program to ABAP OO. Anyone have some good examples/suggestions?
Thanks.

You wouldn't really "convert" a PNP report to OO. For one thing, OO will not support header lines, and the "INFOTYPES" statement creates internal tables with header lines.
SAP still recommends using PNPCE for HR Reporting, so it's not like you should move away from the LDB.
You can replace any and all subroutines in your report with local class & methods.

Printing Crystal report using Generic Text output - formating lost

Hi. I have an accounting system using Crystal to generate it's business forms, in particular invoicing as reports. Recently we have installed new printing system that needs generic text to capture and create the business forms (invoices) into a graphic and text. When Crystal sends data to Generic Text Printer, you can view it ok as a preview but it moves text around , bunches it up and formatting is never the same for two documents. I need resolution as the printing software needs fixed text in a specific location within the data file. Is there a way in Crystal to format fields so they dont move the data and bunch it up. The business forms written in Crystal have sub reports that are supressed if no data is to be printed, but finding text is moving and hard to capture a fixed location in text file. Any suggestions would be appreciated.

Hello,
Thank you for your responses.
Yes, I'm using a bundled version that came with VS 2005.
I'd love to download this update, but I cannot get there! I don't have an login and password for this site, and I don't know how to get them.
This is all I'd found about this issue in this thread:
http://www.crystalreportsbook.com/forum/forum_posts.asp?TID=844
"I opened an incident with Business Objects. They said there is not a way to do what we want to do with the Crystal Reports for .NET assemblies. They are going to implement a way to create a postscript file and include it in Service Pack 3 of Crystal XI Release 2. They would not say how the postscript will be created (ie, ExportToDisk or any other method), only that they would include it in CRXI Release 2 SP3 which they intend to release sometime this coming winter. "
"Just an update...this has been fixed in Crystal XI Release 2 Service Pack 3.
I just finished testing, and it now allows you to print to a file without prompting the user. We are now able to create a postscript file."
Thanks,
Peter
Edited by: Peter Afonin on Jul 16, 2008 11:52 AM

Interactive reports using ABAP query

I have developed an ABAP query which prints the sales documents in ALV list display.
In that list display I would do develop a functionality is , when ever i double click on the sales doc number it will directly go to the VA03 transaction for the corresponding VBELN.
Can anybody explain how to do this?

Hi,
When you double-click on any cell of alv, use this code to fetch the data of the line that you currently clicked, its working:-
When you double click on the ALV line, you will have sy-ucomm = '&IC1'.
So when you define a i_callback_user_command for the FM reuse_alv_list_display,
 i_callback_user_command = 'COMMAND' " for User-Command
and create it as:-
FORM command USING ucomm LIKE sy-ucomm selfield TYPE slis_selfield.
DATA : ok_code TYPE sy-ucomm.
ok_code = ucomm.
CASE ok_code.
 WHEN '&IC1'. "for double click on alv line
 " your code
ENDCASE.
ENDFORM.
As you have used selfield TYPE slis_selfield, the field selfield will hold all the values.
To know on which row you have clicked and to retain that line, use code:-
Suppose you are currently displaying data from internal table itab and corresponding to it you have work area wa.
read table itab into wa index selfield-tabindex. "index value of line you clicked
" now you have the contents of line that you double clicked currently
Now to know the field name that you clicked, use:-
selfield-fieldname " will fetch you the name of field that you clicked
Now using the work-area and the name of field that you clicked, you can easily make out the details of the field i.e., field name and field value and you can code as per your requirement.
Refer:-
CASE selfield-fieldname.
WHEN 'VBELN'.
 SET PARAMETER ID 'AUN' FIELD <wa-vbeln>. "value for work area for vbeln
 CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
ENDCASE.
Hope this helps you.
Regards,
Tarun

Excess Inventory/Scheduled Receipts Report using ABAP Query.

Hi All,
I want to create a ABAP query for Excess inventory & Scheduled receipts in a single report. I have identified tables, fields and some extra calculated fields in the report. Here are the following tables and fields.
EKPO-MATNR      ( Material number)
EKPO-WERKS     ( Plant)
MAKT-MAKTX       (Material Discription)
MARC-MAABC      ( ABC indicator)
LFA1-NAME1        ( Supplier name)
MBEW-STPRS      (Total value)
EKET-EINDT         ( Item delivery date)
RIBOF-AMOUNT
S939-SPWOC or S032-SPWOC
Calculation fields : Value execess this week.extend value, over or under this week, onhand inventory for last week and this week.
Here my question is, when i was creating a infoset, how do i maintain relationship or joins from one table to another table...Is there any sequence for the above tables? Pl suggest. When i was adding all the tables in a infoset and try join the tables...it says illegal join...
Pl suggest me.
Thanks for your help
PRadeep
Edited by: Venkata Pr Papulugari on Jul 18, 2008 1:37 AM

Hi Gordon,
What i need to display is the remainder of the transaction that was received... if it is zero (0), i don't want to display it.
i.e.
transact # 100 inqty = 5
transact # 200 outqty =1
I'd like to display
transact # 100     qty on hand = 4
right know the transaction # that i am displaying is transact # 200.
And also, it needs to be warehouse oriented. because i can have multiple warehose transactions.... and i am getting that wrong too.
Regards,
Manuel Roman

How to display infinity symbol in Crystal Reports using PDF as output

Hi
I need to show infinity symbol (u221E) in reports. I am using a formula and based on certain criteria i have to display infinity symbol.
If (somthing ) then show 'Error' (String)
else if something then 'u221E' (String)
This works fine in RPT file preview , but when opens in PDF , it shows ? mark as if not understood.
I used ChrW (Number) but it has until 255 and does not have a number for infinity
Can someone let me know how do i do this

Thanks for your reply
The version is JRC 11.8.4.1197
It would not be feasible to upgrade at this moment, we are already in production and need a solution for showing infinity in PDF.
Can you suggest something using crystal formulas could be possible or any other solution please .

Reports using abap-oops

Hi,
This is chakravarthi. I have to learn abap-oops.
Sure! No Problem. You can find a classroom course and get on with it.
Edited by: kishan P on Apr 15, 2011 11:56 AM

check ur fcat

Statistics report using ABAP- SXMB_MONI output

Similar Messages

Maybe you are looking for