Statistics: Reset of unfinished data collection
Hi,
I am analyzing some performance issues and seeing the following error in my statistics details under WEB_INIT:
ERROR Reset of unfinished data collection
Does anyone knows what this means? I cannot find anything on the subject.
Thanks
David
The data collection hung again as expected over the weekend. The ANI.log file grew to 1.8 GB again. It is to large for me to open it. I could try to split it up into smaller files. What should be my next course of action?
Similar Messages
-
Problem Topology Data collection LMS 4.1
Hi there,
I have an issue with the lms 4.1 Topology Data Collection. In the Topo Data Collect under Inventory > Dashboards > Device Status > Collection Summary, there are only 2 devices succeeded and 0 device fail. but I have more 500 device in state managed. I run Inventory Collections but the number doesn't change.
Inventory Collection 534 13 02 May 2012, 11:07 CEST Idle Schedule
Config Archive 507 14 02 May 2012, 09:51 CEST Running Schedule
Topology Data Collection 2 0 02 May 2012, 11:11 CEST Idle Schedule
I have read others discussions but no one has the same problem or similar problem. The only possible solution is to reset the ANI db but I'm not sure if it it's the best solution.
Any ideas?
Thaks for helpI confirm that Martin. Good spotting!. I just noticed it in a server I installed yesterday. These 2 lines were added to the hosts file.
127.0.0.1 localhost
127.0.0.1 LMS4
A bit silly for both, since these entries were allready in the hosts file, done by the windows install I think
127.0.0.1 localhost
::1 localhost
Cheers,
Michel -
LMS 4.2 Topology Data Collection Issue
Hi there,
i have an issue with the lms 4.2 Topology Data Collection. After installation the Topology Data Collection was running normaly, but since first server reload the Topo Data Collect under Inventory > Dashboards > Device Status > Collection Summary is "frozen". It only shows the following content from first run:
Topology Data Collection 193 0 Not Available Running Schedule
Is there any option to stop this process elsewhere? I cannot find anything under jobs in running state or so. Clicking on Schedule only give me the option to start data collection, but lms always returns that the process is running.
Thanks for help.Hi,
i have reseted the ANI db using NMSROOT\bin\perl.exe NMSROOT\bin\dbRestoreOrig.pl dsn=ani dmprefix=ANI
Everything is set to 0:
Topology Data Collection 0 0 Not Available Running Schedule
UT Major Acquisition 0 (0 End hosts 0 IP Phones) 0 Not Available Idle Schedule
VRF Collection 0 0 Not Available Idle Schedule
But Topology Data Collection is still frozen to "Running" state.... -
Data Collection in Campus Manager hung
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin-top:0in;
mso-para-margin-right:0in;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0in;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
I am running LMS 3.2 and Campus Manager 5.2.1. My data collection in Campus Manger for my devices does not complete and runs indefinitely. It has been hung in the "running" state for the past week and will not complete. I only way I found to get it out of the "running" state is to reset the ANIServer service and reboot the server. I have had this problem since I have upgraded to LMS 3.2. Does anyone have any input of this issue or possible solutions?The data collection hung again as expected over the weekend. The ANI.log file grew to 1.8 GB again. It is to large for me to open it. I could try to split it up into smaller files. What should be my next course of action?
-
All of the system data collection sets have been running for 6+ months without any issues, couple of weeks ago the 'Server Activity' collection set failed to restart after a planned maintenance server reboot.
When attempting to manually start the collection set it indicates "success", but after refreshing the collection set it showing as stopped. Viewing the logs for the Data Collection (Server Activity) I am getting the message:
Waiting on a kernel object(s) failed. Inner Error ------------------>
The handle is invalid.
After some research into this really unhelpful message I came across one posting where this error has been found to occur in SP1. We are running SP2 which include the fix so this shouldn't be the problem (ref http://connect.microsoft.com/SQLServer/feedback/details/585210/sql-server-2008-data-collection-execmasterpackage-timeout).
To see more detail on the root cause of the error I enabled the additional tracing for data collection (http://blogs.msdn.com/b/sqlagent/archive/2011/07/13/enabling-additional-tracing-for-data-collector.aspx). This provided an exception stack which indicated
that the issue was thrown to what looks like an existing file, referring to a location (e:\) which doesn't exist in our system.
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: wmain _IN
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Command line: dcexec -c -s 2 -i "S160OLTP\OLTP" -m 0 -e 0x09C1635DD4C4C6478A145D679AFE718F_1_STOP
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Application::Init _IN
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Console code page (m_codePage): 437
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Application::ParseCommandLine _IN
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Application::ParseCommandLine _OUT:00000000
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Application::Init _OUT:00000000
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Application::Main _IN
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Started continuous mode collection on thread 12036
DCEXEC!26d0!2f04!2012/11/28!11:17:25:: StartCachedCollectionWrapper _IN
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Waiting for collection to exit or stop event to be signaled
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: StartCollection _IN
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: StartCollection(iSetId = 2, iCollectionMode = 0, pwszInstanceName = S160OLTP\OLTP)
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CDataCollectorController::ExecuteCollectionSet _IN
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: SQL Instance Name: OLTP
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CDataCollectorController::TryExecuteCollectionSetOnce _IN
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CDataCollectorController::Initialize _IN
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CDataCollectorController::Initialize _OUT:00000000
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CDataCollectorController::PopulateCollectorPackageParameters _IN
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CacheWindow=1, CacheDirectory='I:\MSSQL10.OLTP\MSSQL\dccache'
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CDataCollectorController::PopulateCollectorPackageParameters _OUT:00000000
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CDataCollectorController::PopulateSetPackageParameters _IN
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CollectionSetUID='{49268954-4FD4-4EB6-AA04-CD59D9BB5714}', ExecutionMode=0, IsSystem=-1, LoggingLevel=0, DaysUntilExpiration=14, ExitEventName=''
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CDataCollectorController::PopulateSetPackageParameters _OUT:00000000
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CreateControlEvents _IN
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: e ERROR: Win32 Error: GetLastError=183, retCode=0x4, function CDataCollectorController::CreateControlEvents, line 470, file e:\sql10_katmai_t\sql\mpu\shared\dc\runtime\controller\src\datacollectorcontroller.cpp
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: e ERROR: Failed to create kernel event for collection set: {49268954-4FD4-4EB6-AA04-CD59D9BB5714}. Inner Error ------------------>
Cannot create a file when that file already exists.
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CreateControlEvents _OUT:00000000
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: e ERROR: DC_FAILED: function CDataCollectorController::TryExecuteCollectionSetOnce, line 350, file e:\sql10_katmai_t\sql\mpu\shared\dc\runtime\controller\src\datacollectorcontroller.cpp
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CDataCollectorController::TryExecuteCollectionSetOnce _OUT:0x000004
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: Collection set execution failed, retrying in 5 seconds...
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: Waiting for exit event or retry timer failed.
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: e ERROR: Win32 Error: GetLastError=6, retCode=0x4, function CDataCollectorController::ExecuteCollectionSet, line 278, file e:\sql10_katmai_t\sql\mpu\shared\dc\runtime\controller\src\datacollectorcontroller.cpp
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: e ERROR: Waiting on a kernel object(s) failed. Inner Error ------------------>
The handle is invalid.
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CDataCollectorController::ExecuteCollectionSet _OUT:0x000004
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: StartCollection _OUT:00000000
DCEXEC!26d0!2f04!2012/11/28!11:17:25:: StartCachedCollectionWrapper _OUT:0x000004
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Collection thread returned (00000001)
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Waiting for collection thread to exit
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Collection thread signaled
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Application::Main _OUT
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: wmain _OUT:0x000004
I am now stumped as I haven't found anyone else experiencing this issue.
Any ideas, please help??Thanks for the pointer Eileen, problem solved.
Can't believe I missed it, but after reading the last section on system hangs it occurred to me that I hadn't checked that all dcexec.exe processes were killed when I disable the data collection service.
For anyone else experiencing this issue I identified the dcexec.exe processes using the following in cmd line:
TASKLIST /SVC /FI "IMAGENAME EQ DCEXEC.EXE"
On the default setup of the data collection there should be two dcexec.exe processes constantly running, one for "Server Activity" and another for "Query Statistics". On our server there were five running with the data collection disabled.
After killing all of the processes and restarting the data collection problem solved!!
Still need to understand why the processes didn't shut down cleanly when the server was restarted, but at least I know where to look now. -
Can not start data Collection service
I have installed Fabric Manager version 3.3.(4). In the Performance Web Client I can not start the service Data Collection is in starting forever.
I also could not stop it. I rebooted the server and the status for this service is in starting.
Thanks,Please provide more details like: Server OS, Java version, and what type of database you are using for the FM Server. Have you considered using a newer version of FM Server?
-
Customer Name on Sales Order not in Data Collections
Hi,
I am looking for some help. My company just did an upgrade from 11i to R12 in the middle of May. As part of the upgrade we installed ASCP. We have noticed that certain customers are not being collected when running Standard Data Collections. We have open sales orders in the system for the customer. The sales order are being collected properly and appear in the plan. When we show the Customer field in the 'Supply/Demand Screen' in ASCP, the field is blank for select customers. Is there anything on the customer master or sales order line that would prevent the customer name from being collected? Any insight would be helpful.
Thanks
RichYou can go to order organizer screen select the OA NO which you are not able to see in the ASCP workbench, go to line items---using show field get the Demand visible
tab on screen-----default value should be 'Y' if blank then then that could be the one of the reason. -
Data Collection -- Planning Data Pull process failed
Hello Experts,
I am having a problem with data collection, the result of Planning Data Pull was completed error. It seems the problem is on the Planning Data Pull Worker.
I am using 2 worker to run Planning Data Pull, and both result was errors. Below are some of the errors log:
16-MAY 19:11:34 : Procedure MSC_CL_SETUP_PULL.LOAD_CALENDAR_DATE started.
Into populate_rsrc_cal
16-MAY-2011 19:11:40
APS string is Invalid, check for Error condition
16-MAY 19:11:40 : Error in Routine GMP_CALENDAR_PKG.POPULATE_RSRC_CAL.
16-MAY 19:11:40 : User-Defined Exception
16-MAY 19:11:40 : User-Defined Exception
16-MAY 19:11:40 : Error_Stack...
16-MAY 19:11:40 : ORA-06510: PL/SQL: unhandled user-defined exception
16-MAY 19:11:40 : Error_Backtrace...
16-MAY 19:11:40 : ORA-06512: at "APPS.MSC_CL_PULL", line 6218
ORA-06512: at "APPS.MSC_CL_PULL", line 1583
Help me please.
Thanks & Regards,
AndiThis error shows up when it cannot find any organizations.
Use the sqls below to identify this
1. select MSC_CL_PULL.get_org_str(&instance_id) from dual ;
2. select instance_code, instance_id from msc.msc_apps_instances where instance_code='&instance_code'
3. select * from apps.msc_instance_orgs where sr_instance_id= &instanc_id
sql 1 should in principle return the orgs available. If this returns null or -9999, then it's an orgs problem
sql 3 will show the available orgs.
If the organizations are enabled for planning in the ASCP instances form, then run a targeted refresh for trading partners (suppliers/customers/orgs). If this works with no errors, then look at the table msc_trading_partners. It should contain records for the orgs with partner_type = 3 -
How do i reset time and date on my itouch
how do I reset time and date on my itouch?
Go to Settings>General>International and make sure that Calendar is set to Gregorian.
Bext
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
How can we reset the session data in SAP ISA B2B application.
com.sap.isa.isacore.action.IsaCoreInitAction$StartupParameter this action class providing the special feature to store all data passed to it in the request as parameters into the session context and make them available for all other actions.
1. But in the inner class they had defined private parametrized constructor.
2. Action class is defined as final.(there is no chance to override the method)
3. There is no setter method (only getter() is available).
4. Creating a new Z_ class that is reflecting in entire application.
5.They had hard coded the Session attribute name in Action class.
6. Application is expecting a session object with the same attributes.
Is there any chance to create a new object for this class or any where any chance to reset the session data. Am using the Multiple_SoldTO concept in my application. My back end ECC .Please help me.
Advanced Thanks
PC.M
Edited by: pmudigonda on Jul 6, 2011 1:21 PMI am not sure about your requirement, but yet.. Did you check UserSessionData object? It encompasses all the session variables.
-
Hello.
I am trying to reset all my data stored on iCloud account. How can I do this?That feature is no longer available.
-
How to perform Data Collection on single SFC with QTY = 1 with material lot size 1?
Dear experts,
We are working with SFC qty>1 on a relaxed routing. At a given operation we want to collect the data on single quantity; i.e. SFC qty on that operation, where the collection will happen, will be 1.The corresponding material lot size is for ex 10. The operator must be able to collect data on SFC with qty=1 multiple times until the quantities will be consumed. He must be also able to collect other values on the remaining quantities on the same operation with the same DC group or other DC groups. How many times the data must be collected is dependent on the shop order build quantity. The data may be collected several time but not more than the build qty. In other words some specific data will be collected on a qty of a product while others will be collected against remaining quantity. The data collection must be also done in a serialized manner.
Here's what we have set up so far:
1) 3 DC groups, each DC group has 3 data fields.
2) Each data field has the following restrictions: Required Data Entries = 0 and Optional Data Entries = 1
3) All DC groups are attached on the same combination of operation\material\routing
4) we are using relaxed routing
Process description:
The operator must be able to collect any data field on single product. For that he will enter the operation where the data collect are attached, he will enter the SFC with qty=1 then he will run the data collection after selecting the appropriate DC Group and entering the needed information. The operator will complete the SFC with qty=1.
The operator will pick the next product, select the same SFC and enter qty 1 and collect other value against this product.
Problem is:
Once the first collection is done on a given SFC with entered qty=1, the system is not allowing the operator to do further collects on the same SFC with qty=1 or any other quantity. He cannot select any DC group from the DC group list. We tried also with the table selection menu on the DC Group list but nothing can be selected.
So we tried to play around with the DC group definitions as follows:
A) we set Required Data Entries = 0 and Optional Data Entries = 10. Still the operator was not able to select any DC group after collecting data the first time. We tried to reopen the pod and list again. But we get the same blocking behavior.
B) we set Required Data Entries = 10 and Optional Data Entries = 1. The operator was able to select the DC group after collecting data the first time. BUT operator must enter the data fields 10 times on one SFC quantity, which is not what we want. Besides again he cannot collect other information on remaining quantities on the same operation.
C) There's an option to serialize the SFC before reaching the operation where the collection is happening, then merging ofter complete. Automation is needed here; hence customization. We are highly avoiding customization now, since we expect the data collect to work well on single quantities even when the main SFC has qty>1
Questions:
1) Are we missing any kind of further configuration\setup?
2) Or the current system design does not allow collecting data on single quantities of an SFC which main quantity is greater than 1?
3) Looking at this link Approaches to Collection of Data - SAP Manufacturing Execution (SAP ME) - SAP Library, there's nothing mentioned about same SFC number with multiple quantities!!!
We are using SAP ME 15.0.3.0.
Thanks in advance for your help
AliAli
to collect data for the same SFC multiple times, your system rule "Allow Multiple Data Collection" needs to be set to true for the site.
Stuart -
What is the significance of data collection nad search help exit field ?
Dear Gurus
I know i am asking very basic quetion of abap but sdn is the only source to learn sap for me.I want to thanks you all for your kind support.
i read most of the post related to search help and trying to create one.
for elementary search help.
SE11 -> SEACH HELP -> ELEMENTARY SEARCH HELP
I have doubts regarding to fields "DATA COLLECTION" and "SEARCH HELP EXIT".
reference to a tutorial it is a maintenance view shall i have to reate a maintenace view first.
and other field is SEARCH HELP EXIT what is this.
please help me .
Thanks in advance.
Chitta Ranjan mahato.
Edited by: chitto123 on Oct 8, 2010 5:59 AMHowdy,
DATA COLLECTION - refers to a database table or view. This is the data that the search help will search through and display based on the parameters provided, so you can create your own view for the search help if you want the search to cover multiple tables.
SEARCH HELP EXIT - You can create a function module to be able to alter the Search Help's selection and results at various events throughout the search help. An example of this function module is provided with some documentation in function module F4IF_SHLP_EXIT_EXAMPLE.
Cheers
Alex -
Errors in weekly data collection
Hello,
I am running ecc6 sp 15 on AIX 5.3 and oracle 10.2.0.2
when i goto transaction st03 -> workload -> <instance_name> ->week dir - when i try to open one of the logs i get the following error message
on the botton of the screen - "unknown period type (W).
when i try to watch a daily log it is displayed without a problem.
moreover when i push on the change user mode button (expert mode or
service engineer options) and move to service engineer, i try to
calculate both in background and in dialog i get the same error
message - unknown period type (W).when i press again on the user mode
button (expert mode or service engineer options) i get a dump -
DYNPRO_NOT_FOUND - dynpro does not exist, the current abap progrem
SAPWL_ST03N HAD TO BE TERMINATED.
the saposcol is running, the background job -
SAP_COLLECTOR_FOR_PERFMONITOR is running and working (daily data is
collected and displayed correctly)
each week i get an early watch alert report but with errors in data
collection section with the following exception -
SAPWL_WORKLOAD_GET_SUMMERY_I_W - NO_DATA_FOUND.
please advise asap
Regards,
Moshedone - had to import note 1014116
-
Adobe flash player does not load statistics on Google Public Data
Adobe flash player does not load statistics on Google Public Data and displays a white page. However If I put the same URL in an other browser the page loads seamlessly. Is it a Firefox or a Adobe flash player bug ?
I looked on the Google Public Data site, but couldn't find any Flash videos.
Can you provide a link where you say the problem is occurring?
Maybe you are looking for
-
Remote app upgrade issues..question. help!!!
I have been using my iPad with the remote app to control my iTunes music that is on my Mac mini in my living room. I have had the same app on my iPod and Iphone where all 3 units could request, communicate and interact with iTunes dj...and we could a
-
Wondering if I can get the attention of some of the mods - My iPhone, when docked and playing music, reboots on its own. I touch nothing, it is not connected to anything but my desktop speaker system and it is working itself through the playlists. Od
-
OBIEE web services: unable to get an html working report
Hi all, I am trying to get an html report using the OBIEE webservices and I am facing some problems when I try display the report. I have browsed a lot of websites and my conlusion is thah I might have missed the setBridge method even if I haven't re
-
Can I post GL Transactions with past net due date?
Hi to all, Good day! My concern is regarding uploading and posting of GL transactions to SAP. Is it possible to post a document (GL Transactions) if the net due date is in the past? I am trying to upload and post GL Transactions but the batch input l
-
Anyone using Tunes4Mac Video Converter Platinum???
Hi all I bought this program a while back so i could have another method of backing up all my itunes ( legally purchased ) videos, tv seasons etc after suffering a HDD failure and loosing a fair chunk. I now have nearly 3.5Tb of data that i would be