Statistics technical content activation issue with MD process chain in BI7

Hi,
Let me give you history of the issue first.
I had to activate the Statistics in BI7. I followed the SAP Note 965386 and activated the Technical Content.
Faced activation issues in MD process chain, Content Master Data-0TCT_MD_C_FULL_P01. It dint get activated, Followed the SAP note 1065919, which asked me to remove the below process from RSPC and activate it.
Load data- Process Variant Attribute and
Load data- Process Variant Text.
I did the same and it got activated after removing them.
Issue is. Later knew that manually activating the Process chain from Content would have activated those Infopackages aswell.
Now how should I get those processes into the chain and activate? Based on your suggestions, I can let you know what all I have been trying to fix it?
Relying on you for solution.
Thanks
Pavan

Thank You Neethika,
I have this issue solved. I replicated the data sources, activated those infoPackages manually and then added those variants into the process chain manually. So my MD chain now has all the necessary process.
Now i need to schedule them and see if it runs with out any errors. I will keep this thread open till i run it to take your help if i get any errors while running them.
Thanks
Pavan

Similar Messages

BI Statistics Technical Content Activation Error

I got some errors when activating BI Statistics technical content in SPRO and could not find any information about this error on SDN. I would really appreciate your help.
Thank you.
Tony
Below is part of the error message from job log:
Variant '0PAK_472D695A0ZS3DWVBA4H1OO9A6' of process type 'LOADING' not found in A version
A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
A type "Activate DataStore Object Data" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in th
A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_E8U9KCLMI7HW76ZSYTSL0N7NA in the chain
A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_E8U9KCLMI7HW76ZSYTSL0N7NA in the chain
A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_EAYZPOK7VL8KCD6D6HI3UYUT2 in the chain
A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_EAYZPOK7VL8KCD6D6HI3UYUT2 in the chain
A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_44I75TQHBEZKMPJT67XC0VKQJ in the chain
Version 'M' of chain 0TCT_C0_DELTA_P01 was saved without checking
InfoPackage no longer exists in object version A in table RSLDPIO
Variant '0PAK_472D695A0ZS3DWVBA4H1OO9A6' of process type 'LOADING' not found in A version
A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
Version 'M' of chain 0TCT_C0_DELTA_P01 was saved without checking
Start of Process Chains
ABAP/4 processor: UNCAUGHT_EXCEPTION
Job cancelled

Hi Ramesh,
That's the point. Admin cockpit pops up a message:
"Before you can call the BI Administration Cockpit, the technical content has to be installed and customized."

Issue with the process chain?

Hi All,
I have a process chain triggerred by an event.I had this transported into Q box.After moving it to Q i did click on acativate and schedule icon.When i triggered the event in Sm64.The process chain triggerred successfully.The next day when i tried to trigger the event ,the process did nothing,its only after i actiavted the process chain and triggrred the event the process.
I know the process chain should be good after ictivated once when moved into a new system.Can anybody tell me how to resolve my issue of activating the PC whenever i wnat to trigger it.What i am i missing here?
Please advice,urgent

I think Geo answered what you want and what I wanted to tell.
Thanks Geo
Ther are two basic things
--> In order that your PC responds to your "Event & Parameter", maintain the same and PC <b>should be in scheduled status</b>
--> the periodic check box <b>schedules again</b> once the current run completes. i.e makes ready the PC for the next run whenever the next "event and parameter" gets triggered by any means ( you no need to activate and schedule again)
Sorry If my answer confused you..Hope everything is clear now...!
VJ

Technical content activation for BI STAT and Admin cockpit

Hi friends,
I am going to setup the IMG call for BI STAT and Admin cockpit. If i run the technical content activation will i need a precaution for other data loading. If i run them in background does it affects other data loads. did i need to take down time for the whole system?
After the implemntation did i need to load data for all infoproviders in quality system.

Hello Suresh,
I am not clear on all your questions.
In general, technical content process chains load data similiar to other BI process chains.
if your system is productive for a longer period already ( > 6 months ), there may be a lot of
BI statistics data generated and this will take a longer time to load the technical content cubes during the initial load.
Otherwise, it should not affect system performance.
It is better to schedule them daily to avoid huge data loads.
But these are only guidelines. It depends on your need.
You would need to do separately for quality and production system, if you want the BI stats in those systems. This is similiar to any other Data load and cube and content in BI.
Thanks,
Bilal

Part 2: Flat files and Business Contents: Any issues with this scenario?

I will appreciate some clarification on the some points made in response to my previous post "Flat files and Business Contents: Any issues with this scenario?"
1.
" ...youd better analyze those cubes for data redundancy and presence of data youll never use. " I will appreciate some clarification on the type of analysis you are referring to. Examples will help.
2.
"If you want to combine several found IOs in your custom dataprovider, then again you must know (or figure out) relationships between these IOs." I will appreciate some clarification on the type of relationship you are referring to. Examples will help.
3.
I am a bit confused with "..include into ODS structure ALL fields required for the cube" but you also noted noted that "...except navigational attributes and chars and KFs that are going to be determined in TRs or URs."
If you exclude ALL these, haven't you excluded all the fields you included in the ODS structure?
4.
"Consider carefully the ODS key fields selection. Their combination should not allow data aggregation that you dont need."
I may be missing the point here, I understand that you need to select the fields which will form the unique ID for the records in the ODS under the Key Field (please correct me if I am wrong with the purpose of the Key Field), but I don't understand the discussion of "aggregation" in the context.
Thanks in advance

Hallo
I try to give some exaplanation based on the previous answer.
1. Data redundancy - make sure you do not store the same information. does not make sense to have data redundanty across you Data Warehouse. this is also a cost. just sotre the same information one time if you get all what you need.
2. whatwhever you build you dp, which consist of IO, you need to know with kind of relation (1:1 or 1:n - n:n and so on) exist between them. that will help you when you model you infoprovider. For example I would never pit togheter IO (n:m) in the same dimension if you expect an high number of cardinality. Sometime an IO can be an attribute of another one (depend on relation. For example
Business Partner and his Address. Usually you have a relation 1:1, in this case address is an attribute of BParten and store it in the Masterdata instead then DP
3. Sometime when you load from ODS to CUBE, you can fill some IO (which are in the infocube and not in the ODS)through ABAP routine in TR-Start Routine of Update Rule. Does not make sense to include these IO in the ODS as they are NULL or Blank (the deault value). This can happen when for example, you first load in the ODS (Price and Quantity) and then you calculate Sell price later (Price * Quantity). of course it could be doen also in the Bex. Depends on other factors (Performance - Loaidng -Sizing)
4. Make sure that the KEY definition of ODS is accordingly to the data otherwise you will aggregate the data and later maybe if you need the detail you miss it.
for example: customer - product - Distr Chan - Sell Price
if each Customer can buy each product for any Distrution Channel, then when you build your ODS(Customer - Product and Distribution must be KEY) otherwise (if you have only Customer - Product KEY for example) you will lose the details for Distribution Channel.
I hope eveyrhting is clear
Regards
Mike

Problem with a process chain transport

Hi all,
I have a problem with a process chain transport, I transport it but when I see the changes in testing environment I dont see it, I did it four times but nothing happen and I dont have errors.
Can anybody tell me how to transport a process chain.
Thanks.

Hi Federico,
When you tranport Process Chains, initially chains will be available under "Not Asigned" node in RSPC Transaction. The transported chains wont be get highlighted automatically. Manually need to open the chain in update mode and activate it on Quality.
Hope it will help you to resolve the problem.
Regards,
Raji

Relating a Request Number with its Process chain

Hi experts!
Do you know if there is anyway (with tables) of relating a "Request number" with its Process chain?
Thank you very much in advance!

Hello
I guess there is no direct way, but you can get it by following:
1) From table RSREQDONE, you can get infopak name by giving a request no.
2) Then from table RSPCCHAIN, For Type = 'LOADING', VARIANTE field give the Infopackage name and it will give u the PC.
Regards,
Shashank

Process Chain in BI7.0

Hi,
What are the steps to create Process Chain in BI
What are the difference between BW 3.5 and BI7.0 PC?
Regards,
Jackie.

Hi Jackie,
Major difference between BW3.5 and BI 7.0 versions
1. In Info sets now you can include Infocubes as well.
2. The Remodeling transaction helps you add new key figure and characteristics and handles historical data as well without much hassle. This is only for info cube.
3. The BI accelerator (for now only for Infocubes) helps in reducing query run time by almost a factor of 10 - 100. This BI accelerator is a separate box and would cost more.
4. The monitoring has been improved with a new portal based cockpit. Which means you would need to have an EP guy in ur project for implementing the portal.
5. Search functionality hass improved!! You can search any object. Not like 3.5
6. Transformations are in and routines are passé! Yes, you can always revert to the old Tcodes.
7. The *Data Warehousing Workbench *replaces the Administrator Workbench.
8. Functional enhancements have been made for the Data Store object:
New type of Data Store object, Enhanced settings for performance optimization of Data Store objects.
9. The transformation replaces the transfer and update rules.
10. New authorization objects have been added
11.*Remodeling *of Info Providers supports you in Information Lifecycle Management.
12 the DataSource: There is a new object concept for the DataSource .
Options for direct access to data have been enhanced.
From BI, remote activation of Data Sources is possible in SAP source systems.
13. There are functional changes to the Persistent Staging Area (PSA).
14. BI supports real-time data acquisition.
15. SAP BW is now known formally as BI (part of NetWeaver 2004s). It implements the Enterprise Data Warehousing (EDW). The new features/ Major differences include:
a) Renamed ODS as Data Store.
b) Inclusion of Write-optimized Data Store which does not have any change log and the requests need no activation
c) Unification of Transfer and Update rules
d) Introduction of "end routine" and "Expert Routine"
e) Push of XML data into BI system (into PSA) without Service API or Delta Queue
f) Introduction of BI accelerator that significantly improves the performance.
g) Load through PSA has become a must. Info Packages are used to load data upto PSA only.
You need to create DTP to update data from PSA to Data Target.
Pls check the following linka also ,it might help u
http://csc-studentweb.lrc.edu/swp/Berg/Articles/NW2004s_what_is_new.ppt
http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/52/a21f407b402402e10000000a1550b0/conten
Steps to create Prcocess chains in BI:
Check in the following links:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30664504-40dd-2a10-3794-db7b4190bef3
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/bi-70-process-chain-and-psa-deletions-1098154
or tcode rspc is for process chains
1.select new from there
2. enter the variant of the process chain
(for start process i.e first one it is immediate always)
3. from lfet hand side of ur processes select the process u want to do,after the start process for eg: load info package.
(give the name of ip and give the variant i.e at wat time u wannt to execute it).
4.likewise drag and drop the processes u wanted to link, one after the other.
5 activate the pc and then schedule it
Pls assign points if it helps u,
Thanks & Regards,
Madhu

Process Chains for BW Statistics (Technical Content)

Hi Guys,
Just a quick question - anyone know of any Business Content Process Chains for BW Statistics?
I can't seem to find any - but just looking for confirmation that none exist and I will then have to built my own.
Thanks
Scott

Hi,
Yes, you have to build your own. Thats the same scenario we faced too.
With Regards

Why process chains for BI statistics Technical Content are not showing in 0

I am looking into 0TCT_MC21 which shows process statistics from 0TCT_C21 and 0TC_VC21.
I know process chains such as 0TCT_C2_DELTA_PO1, 0TCT_C2_INIT_PO1 have been run, yet
They do not show in 0TCT_MC21 which included real time data (via virtual cube) as well as
Collected data 0TCT_C21u2026
Do I have to specify somewhere on which process chains statistics are to be collected, if yes, how??
Thanks.

Hi,
Have you checked this existing thread:
/message/3214515#3214515 [original link is broken]
Regards,
Lee

BI 7.0 Technical Content Activation

We have performed the technical upgrade from 3.5 to 7.0 and are in the process of performing the Post Upgrade steps. We are currently updated to level: SAP_BW 7.00 SP15.
One of the Post Upgrade steps referenced in the "How to ... Checklist: Rapid SAP NetWeaver 7.0 BI Technical Upgrade with BI Accelerator Implementation" SAP document references the the activation of BI Technical Content (even if there are no plans to use it). Our problem occurs when we attempt to activate the required Technical Content objects via IMG (TCode SPRO). When the activation reaches the Process Chain activation a couple of the Process Chains reference objects that are not available at our content patch level.
I have researched and understand the workaround discussed in OSS 1134944. My question is more general. Is the activation of the Technical Content absolutley required - even if we have no plans to make use of it initially? If so, can someone please explain why this is the case.

Ramesh,
I understand the purpose and usage of Business Content in BI. As I stated in my thread, the Post Upgrade How To Guide implies that the activation of the Technical Content (a component of BI Business Content) is required in 7.0 - even if there are no plans to use it. Since we are having problems with the activation of the Technical Content my question referred only to its objects. We are trying to understand why (if) this component of the Business Content is actually required as the document implies.
Dan

Urgent-Technical content Activation

Hi all,
I had a basic question.
I am activating Technical Content in BW.Do we have to activate the datasources in R/3 system and then replicate it in BW.Just like any other datsources?
I was under the assumption that activating the objects related to Technical contetn does not have to deal with R/3 system.As i see the datasources under the Bw system under the source system.
Please correct me if iam wrong?This is an urgent issue,appreciate with any help provided.

Hi sreenivas,
that was a very helpful answer.Now i can say that my doubt has been clarified "if i have to activate DS in R/3 for Technical Content".
But my other question is when i transport it to QA.I have been getting the following logs.
Warnings:
Application component TCT of DataSource 0BWTC_C02 does not exist Etc for each DS.
Errors:
DataSource 0BWTC_C02 does not exist in source system QBWCLNT100 of version A
Mapping between data source 0BWTC_C02 and source system QBWCLNT100 is inconsistent
Field CALDAY will not be delivered from DataSource 0BWTC_C02 in source system QBWCLNT100 Etc
I get a RC 8 on this.I checked the DS 0BWTC_C02 in Dev and it was in active version so saved it and retransported it but the same message.
please advice.
thanks in advance

Technical Content Activation failed

Hi guys,
I tried to activate Technical Content via SPRO's Activate Technical Content in SAP NetWeaver BI.
However, I am facing with these problems:
1. If I choose only Activate SAPI DataSources, I will get a time out.
2. If I choose only Activate Technical Content, I will get the following error message:
Runtime Errors         UNCAUGHT_EXCEPTION
Exception              CX_RS_VERSION_NOT_FOUND
Date and Time          23.07.2008 09:38:27
Short text
     An exception occurred that was not caught.
What happened?
     The exception 'CX_RS_VERSION_NOT_FOUND' was raised, but it was not caught
      anywhere along
     the call hierarchy.
Since exceptions represent error situations and this error was not
     adequately responded to, the running ABAP program
      'CL_RSSM_LOADING===============CP' has to be
     terminated.
What can you do?
     Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
     administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_RS_VERSION_NOT_FOUND', was not
     caught in
    procedure "CHANGE_VARIANT" "(METHOD)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    Object   could not be found in version
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
"UNCAUGHT_EXCEPTION" "CX_RS_VERSION_NOT_FOUND"
    "CL_RSSM_LOADING===============CP" or "CL_RSSM_LOADING===============CM00G"
    "IF_RSPC_TRANSPORT~KEY_CHANGE"
If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
     Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
     In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"CHANGE_VARIANT" "(METHOD)", or its possible occurrence must be declared in the
RAISING clause of the procedure.
To prevent the exception, note the following:
Can someone help to me solve both problems???Thanks!!

Hi,
Aks your Basis person to look into the dump in tcode ST22. Also you can check in the SAP notes for error message displayed in the dump. There you find the correction notes.
Mostly this problem is related to Service packs.
Regards,
Sreenivas.

Technical Content Activation Failed in BI7

Dear experts,
Basically, I have posted this question in another category but the response is very disappointing. So I though of moving the question to here.
I am using SAPKW70015 i.e. Release 15. I tried to activate Technical Content via SPRO's Activate Technical Content in SAP NetWeaver BI.
However, I am facing with these problems:
1. If I choose only Activate SAPI DataSources, I will get a time out.
2. If I choose only Activate Technical Content, I will get the following error message:
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_RS_VERSION_NOT_FOUND
Date and Time 23.07.2008 09:38:27
Short text
An exception occurred that was not caught.
What happened?
The exception 'CX_RS_VERSION_NOT_FOUND' was raised, but it was not caught
anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_RSSM_LOADING===============CP' has to be
terminated.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_RS_VERSION_NOT_FOUND', was not
caught in
procedure "CHANGE_VARIANT" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Object could not be found in version
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_RS_VERSION_NOT_FOUND"
"CL_RSSM_LOADING===============CP" or "CL_RSSM_LOADING===============CM00G"
"IF_RSPC_TRANSPORT~KEY_CHANGE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"CHANGE_VARIANT" "(METHOD)", or its possible occurrence must be declared in the
RAISING clause of the procedure.
To prevent the exception, note the following:
Can someone help to me solve both problems???Thanks!!

Hi,
Aks your Basis person to look into the dump in tcode ST22. Also you can check in the SAP notes for error message displayed in the dump. There you find the correction notes.
Mostly this problem is related to Service packs.
Regards,
Sreenivas.

Testing BW Statistics (Technical Content)

Hello ever one,
need some help in testing BW Statistics.
I have install all standard 6 cube and 1 multiprovider in Dev.
Every thing went fine,I am facing problem in testing,
as i am comparing BW Statistics Report out come with
BW objects (such as Cube/ODS-records/deleted records)
which are no where matching with BW Statistics report.
Is their any specific setting i have missed out coz of this
its not giving correct report ?
or some thing else need to be done for testing.
please let me know.
Thanks & Regards.

MWM,
Is this with respect to :
1. Requests being deleted ?
2. Selective deletion ?
Also what is the nature of mismatch - the records do not tally ?
2. There are no records in statistics ?
Try refreshing stats for the cubes and then reload technical content once again.. also check the same in table RSDDSTAT.
Arun

Statistics technical content activation issue with MD process chain in BI7

Similar Messages

Maybe you are looking for