Stats Cube

Hi
we have upgraded to 7.0 and my user wants the data for the stats cube 0BWTC_C03 which is the cube for bw 3.5
i schedule the load but get zero records any pointers if i need to take care of something else or if i am missing out something over here
Please suggest ?
Thanks
Puneet

Hey check if you have enabled capture of statistical data.
This is performed in the administrator workbench > Tools > BW Statistics for InfoCubes. Choose select all in order to capture OLAP and WHM statistics for all InfoCubes.
Hope this helps.

Similar Messages

  • Query on Stat Cube

    Hi,
    I am trying to get query list based on last used date.
    I ran query on stat cube 0BWTC_...
    Also, i got list of queries from the view v_compdir_compic in bw backend.
    But the query list i get from stat cube query is less than what i get from View table.
    there are aprox 300 less queries.
    can u please tell me why the list is different ?
    thanks,
    KS
    Edited by: Keral Smith on Nov 4, 2008 10:04 AM

    Hi Abhijit,
    We have all BW statistic cubes loaded on november 1st.
    which are 0bwtc_c01,.......they are for aggregate, for OLAP, for OLAP navigation etc.
    so how come the list of queries are different than V_COMPDIR_COMPIC ?
    any clue ?
    thanks,
    KS

  • Should Fiscal Year be derived from posting date for sales stat cube

    Greetings,
    Is it common to derive FY from posting date of the invoice for the sales stat cube.  We have the standard SAP datasource 0UC_SALES_STATS_02 to extract billing information from ECC.  On the BI side, the FY is derived from posting date in the transformation before it reaches the target (i.e. cube).  Is this derivation common
    Thank you in advance for your response.
    Behnaz

    Hi,
    You can derive the Fiscal Year from the posting period and it not uncommon to see this.
    Reg,
    Rahul

  • To install BI Stats cube in 7.0 - BI Admin Cockpit necessary?

    Hi Guys,
    Just curious to know, to install BI Stats cube (0TCT*) in BI 7.0, is installation of BI Administration Cockpit necessary? We would like to install BI Stats cube from Business content and start collecting Stats.
    Did anybody face problems activating BI stats cube in BI 7.0?
    Abhijit
    Edited by: ABHIJIT TEMBHEKAR on Nov 12, 2008 1:44 PM

    Its the reverse, To have BI Admin Cockpit, BI Stats cubes (0TCT*) are necessary!!
    VJ

  • Stats Cube -- Frequency of a query run.

    Hi All,
    I have been given a certain set of queries and the user wants to know how frequently these reports run and the user name who runs the reports. I know these can be done by working upon stats cube. Can someone please help me in lil details on the cube name and wat all do i need to do in making a new report that would fetch the infromation mentioned above.
    Your help would be appreciated.

    Hi,
    I used 0TCT_MC01  as all my reports are based on multiproviders.
    I included the following fields in rows
    0TCTUSERNM -- USER
    0TCTBIOBJCT -- BI REPORT
    0CALWEEK -- CALENDER YEAR/WEEK
    Now you need to check if statistics is enabled for the infoproviders that you are looking for stats.
    You can check it in RSA1--> Tools --> Maintainance of statistics properties.
    When you run the report you get
    BI Report   User Name Cal year/week( or whatever date field you are taking)
    Z*******         XYZ     12/2010
    You can use the excel function subtotals, ( its in Data--> Subtotals)
    Here for every change of BI report it gives the total number of users as a subtotal count for a particular time frame
    There might be an easier way to get your result, but I followed the above mentioned method.
    El.

  • InfoArea in NW2004S Stats Cube?

    Hello,
    Is there a way to restrict by infoarea in the stats cubes in 2004S?
    Thank you!

    In BW3.2 there was an infoarea infoobject. Is there a substitute for this in the new statistics cubes?

  • Sales Stats Cube has incorrect data, amounts are doubled...

    On 05/28/2010, a request in the PSA was processed to the DSO twice and subsequently processed to the InfoCube.  This is an issue because the key figures aggregation for the following key figures is set to summation
    ·     0VAR_VAR           Variable AMT
    ·     0UCTAX_AMT      Tax Amount
    ·     0UCTAX_BASE     Tax Base
    This is causing the Amounts in the DSO Active Table and Cube for 05/28/2010 to double.
    Subsequently the request in the PSA has been deleted and the request in the Cube has been compressed.
    How can we correct the doubled amounts in the Cube and DSO?

    The biggest challenge here is to do a full repair load from ECC system as
    we have to run the Mass Activity Job to populate the staging table so we can pull the record using the extractor. We have to run the mass activity job again because data is not available in staging table as we keep only one month worth of data.
    How to run the mass activity Job for this scenario and make sure that we are not missing any documents?
    Thank you.

  • BI Admin Cockpit - Field Start-Time 0TCTSTRTTIM in cube 0TCT_C21

    Hello,
    We recently installed the BI Admin Cockpit from technical content. When looking at the data transfer rules in all concerned info cubes like 0TCT_C21 (Process Statistics) I find that all time and date fields are derived from some time stamp field. The derivation is done based on time zone UTC for all fields except the field Start Time (0TCTSTRTTIM). For 0TCTSTRTTIM the conversion is done based on local time zone (SY-ZONLO). I find this rather irritating when developing queries. Is there an explanation for this?
    Regards,
    Ulrich Meier

    Its the reverse, To have BI Admin Cockpit, BI Stats cubes (0TCT*) are necessary!!
    VJ

  • BI 7.0 Stats - Is it supposed to install us the Standard Process Chain?

    Hi All,
    We understand that Virtual Cubes would obtain the real-time based on what is there in the basic cubes, underlying the Technical Content Multicubes.
    We did install all the technical content. Is it supposed to install us the Standard Process Chain for BI Statistics as well to transfer the stats data into the Basic Cubes.?
    If not, how do we setup the stats loads to the basic cubes easily....?
    Thanks in advance.
    Best Regards,
    - Shashi

    Hi,
    When you install the BI 7.0 stats from teh BI content all the process chains related to it automatically gets installed.  But you can see teh correct report only if the DB Stats is uptodate for all the info providers in your system. I mean to say that if all the dataloads to the cube is followed by the DB Stats process only then the coressponding Technical Stats cube gets the correct data. After which you can see teh correct report.
    There is no need to create a process chain separately for them. Just you need to keep updating the DB stats for your info providers.
    Navesh

  • BW Statistics Cube is not Getting Data

    Hi All,
    I have installed  BW statistics first time and every thing goes fine , it activated succesfully.
    But when i checking in the indivisually in every cube, not getting any request, as well as none of the Technical contained query giving Out put,
    But I can trace it in the ST03.
    So please let me know where i made mistake during installation of BW statistics.
    Regards
    Prem

    Hi Premanshu;
    You can do the Init manually this way you will also see if the data load is working or not...and in the process chain infopackage include it for delta laod.
    The frequency of the data load for stat cube depends on your systems and how much the accuracy the users wants from the RSDDSTAT* table. We have the process chain to load the stat cube on weekly basis...this should be enough.
    Assign the points if these answers helps.
    thanks.
    BK

  • Unable to restrict the new cubes(transactional) in the query

    hi bw pro's,
    i have a bw statistic query(custom one) query is designed by statistic cube(0BWTC_C02). In the query 4 custom cubes are restriced. now the requirement is 2 more transactional cubes need to be added in the query.
    now the problem is when i am trying to restrict the another two cubes, i am unable to find the 2cubes in the list of the cubes.
    even i added the two cubes for bw statistics by choosing tools->bw statitstics for infoprovider.
    still iam unable to see in the list. Can anybody suggest me. how to proceed.
    any response will be rewarded.
    thanks
    suri

    Hi stefan,
    Thanks for your reply.well hope it will resolves the problem.
    before that i want to clarify one more doubt, wht exactly ur telling in the first point about navigations, i am not getting that. can you be detail plz.
    The second point is BW stats cube are lastly updated on 08. 2004.hope it would also be another reason.
    Thanks,
    suri

  • BW 2004s stats 0TCT_C21

    Hi ,
    I am trying to load the BW stats cube 0TCT_C21, this particular data load is failing because there are some records with timestamp field as null.from the source...i implemented the note 979721, but this is only for populating the 0calday field from the start timestamp field, so whenever the timestamp is null, its erroring out, did anyone faced the same issue, i looked up for any sap note but didnt find any, please let me know how to proceed.
    Thanks
    Vj

    Yes evrything is upto date, as i mentioned i added the routines as per the SAP Note, but those routines use time stamp for calculation, if that is coming zero then the data is failing, what can i do for the time stamp not getting zero.
    Thanks
    Vj

  • BW Stats 0TCT_C21

    Hi ,
    I am trying to load the BW stats cube 0TCT_C21, this particular data load is failing because there are some records with timestamp field as null.from the source...i implemented the note 979721, but this is only for populating the 0calday field from the start timestamp field, so whenever the timestamp is null, its erroring out, did anyone faced the same issue, i looked up for any sap note but didnt find any, please let me know how to proceed.
    Thanks
    Vj

    Yes evrything is upto date, as i mentioned i added the routines as per the SAP Note, but those routines use time stamp for calculation, if that is coming zero then the data is failing, what can i do for the time stamp not getting zero.
    Thanks
    Vj

  • SSAS data source calculating from two data source

    Hi There,
    I have SSAS cube and use SSRS 2008R2. Basically I have cube A for current month income statement, cube B from previous month, they have shared the same dimensions. I want to create  report to show
                      current month  previous Month            Calculation
       Account               Amount A         Amount B            Amount A - Amount
    B
    Revenue                 Amount A         Amount B            Amount B
       Expense              ,,,,,,
    Net Income
    Any advice?
    Thanks
    Don

    Hi Dz0001,
    According to your description, you want to combine the data from two cube into one tablix. Right?
    In this scenario, since your two cube share same dimensions, we can use lookup() function to retrieve the income from another dataset based on the data field for dimension rows.
    For example, let's say you have DataSet1 retrieves data from cube A with data fields
    Account and Income, DataSet2 retrieves data from cube B with data fields
    Account and PreIncome. When rendering the data field from DataSet1 in a table, you can use the expression below in detail row.
    =Lookup(Fields!Account.Value,Fields!Account.Value,Fields!PreIncome.Value,"DataSet2")
    Reference:
    Lookup Function (Report Builder and SSRS)
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou
    TechNet Community Support

  • @PRIOR Question

    Good day!
    I'm currently doing a computation for an income statement cube where:
    Net Sales for the current month = Sales of the previous month - Sales discount of the current month.
    Now my problem is with the net sales for the month of January. How can I tell Essbase to get the sales for the month of December of the previous year?
    I'm planning to put the formula under the members January and Net Sales. Will this formula work?
    Member : Jan
    "Net Sales" = @PRIOR("Sales") - "Sales Discount"
    Member : Net Sales
    "Jan" = @PRIOR("Sales") - "Sales Discount"
    I really need your help guys.
    Thanks in advance.
    Additional Info: I just tried the formula but as I query from the cube using Smart View / Essbase Add-in, MS Excel hangs up. I had to restart it and do a query again but it still hangs up every time a query is being done. Does this have to do with the formula?
    Cheers and happy holidays!
    Edited by: 26FEB1986 on Dec 23, 2008 9:43 AM

    Thanks for your reply Glenn.
    I tried the solution that you told me, but as I execute a query in excel, an Essbase error pops up telling me that something about the CalcLockBlock. I have created a calc script to Set LOCKBLOCK HIGH but I it didn't work. Can you please tell me how to solve this problem? I may have created a wrong calcscript for the LockBlock.
    Thanks again!
    Edited by: 26FEB1986 on Dec 23, 2008 4:16 PM
    Please ignore this second question. It's not an issue anymore. Thanks

Maybe you are looking for