Status 29: Error in ALE service : Entry in outbound table not found
IDoc: 0000000003560240 Status 29: Error in ALE service
Entry in outbound table not found
No partner profile (outbound parameter) could be found using the following key:
/0000000000/LS//YHROT_XXM_IN////
This refers to the key fields in table EDP13:
RCVPRN Partner number
RCVPRT Partner type
RCVPFC Partner function
MESTYP Logical message
MESTYP Message code
MESCOD Message function
TEST Test indicator
Procedure
Please check the EDI partner profiles.
But The IDOC befor this and after this is successfully run.
And even after reprocessing also it is giving same error.
After checking Contorl record, we found that there is no data in receipant Info in Partner Tab.
What would be the issue.
Please suggest.
Thanks & Regards,
Monika
Hi ,
Thanks for your reply.
We are using one custom message type.
I would like to give you example of exact scenario.
Suppose my IDOC has large amount of segments then ,
It is dividing as
1st IDOC : Control record ....header and data segments
2nd IDOC : only data segment
3rd IDOc : only data segment
4th IDOC : data segment and Trailer.
In this way, I am getting all my 4 IDOCs in error.
What should be d reason?
your help will be grateful.
Hi Everyone,
any update?
Edited by: Monika.Dhumal on Feb 14, 2012 11:49 AM
Similar Messages
-
ALE Error 29 - Entry in Outbound Table not found
Hi,
I am getting the following error in the IDOC processing.
IDoc: <IDOC Number> Status: Error in ALE service
Entry in outbound table not found
I have checked the partner profile. It is OK
I noticed that the IDoc record doesn't have the defined port. The value in the port section is empty.
The IDoc message type - CRMXIF_ORDER_SAVE_M
Basic Type: CRMXIF_ORDER_SAVE_M01
Any inputs will be appreciated.Observations -
I checked the Status records for the IDOC and there are only 2 entries -
1. 01 IDoc Generated and
2. 29 Error in ALE Service - Entry in Outbound table not found -
IDOC Error - Entry in outbound table not found - Status 37
Hello,
we try to generate the IDOC in a Test Tool WE19. I always get the same error "Entry in outbound table not found" - Status 37. I tried already many config changes (Partner, Ports, Distribution Modell...).
The thing is that the IDOC should be sent on external system (non-SAP System) but also the IDOC should be write to file. The external system should later on catch the IDOC and process the data.
I suppose the problem is the fact that we send it to external non-SAP System. I add as Port Data and the source where the IDOC shoud be generated. The Partner that I choose is logical system. However I dont specify the RFC Connection because the file should only be saved and not send directly on the external system. Is it possible or maybe I need to specify the IP-Adress of the external system?
When it works I need to generate the IDOC as service management IW32. I try it with TA IORD. I get the message "rejected". Probably because of the error in the test tool WE19.
I am already fighting on it for many hours...
Thank you in advance
MichaelHi
In we 19
Receiver
Port: A port created in R/3 referencing RFC dest pointing to XI.
Partner no: LS of XI (CLNT100)
Partner Type: LS
Sender
Partner no: LS of R/3 (RD1CLNT500)
Partner Type: LS
Message Type is DESADV
Basic DELVRY05
and i am sending blank idoc for testing.
Regards
Monika -
Getting idoc error - Entry in outbound table not found- in outbound scenari
hi,
while generating idoc for outbound idoc to file scenario - i am getting error
"Entry in outbound table not found" (29 - error in ALE service)
Diagnosis
No partner profile (outbound parameter) could be found using the following key:
/C100/KU//WP_EAN////
This refers to the key fields in table EDP13:
RCVPRN Partner number
RCVPRT Partner type
RCVPFC Partner function
MESTYP Logical message
MESTYP Message code
but already entry has been maintained in partner profiles for the corresponding message.
same setup is working for other message types. pls let me know what might be the problemHi,
Check whether partner name is correct or not in WE20/outbound parameters undoer Logical System.
Regards,
Sreenivas. -
Entry in outbound table not found, Error message no. EO400
I have created Partner profile and include message in partner profile. when i have generated IDOc (we60), that time, it is given error ( Entry in outbound table not found---- Error Msg no. EO400).
Please suggest me solution for the same.
Kunjan shahHi Kundan,
can u be more specifidc about ur requirement.So that i can help u out.What all the configs u have done and what is method ur using for generationg outbound idoc.
Regards,
nagaraj -
Entry in outbound table not found E0 400
Hi all,
Can anyone please help me with the below error which i am facing in ALE IDOCS.
status 29: Entry in outbound table not found E0 400
I am unable to see my port name in the created IDOC and the basic type is incorrectly called.
may I know what settings need to be verified.
Thanks in advance.SAP checks the IDoc control record for outbound IDoc against EDP13 (outbound partner profile table). EDP13 is updated when you create outbound partner profile parameter in WE20
Check if you have created the partner profile outbound parameter in WE20 correctly to match your outbound IDoc control record.
SAP checks partner number, port, partner function of the receiver along with message type, message code and message function. They all should match between WE20 outbound partner profile parameter for your message type and the IDoc control record (EDIDC) segment.
This is the SAP code that throws the error message you mentioned
read table q_edidc index 1.
select single * from edp13
where rcvprn eq q_edidc-rcvprn
and rcvprt eq q_edidc-rcvprt
and rcvpfc eq q_edidc-rcvpfc
and mestyp eq q_edidc-mestyp
and mescod eq q_edidc-mescod
and mesfct eq q_edidc-mesfct
and test eq q_edidc-test.
if sy-subrc ne 0.
concatenate q_edidc-rcvprn '/' q_edidc-rcvprt '/' q_edidc-rcvpfc '/'
q_edidc-mestyp '/' q_edidc-mescod '/' q_edidc-mesfct '/'
q_edidc-test into text.
condense text no-gaps.
message a400(E0) with text(50).
endif. -
Outbound IDOC - Entry in outbound table not found - urgent urgent urgent
Hi ABAP Guru
Need Serious help. I created Outbound idoc. Custom message type, basic type etc. I created partner profile as well. But when I see my idoc in WE05 I see following error.
Entry in outbound table not found
Diagnosis
No partner profile (outbound parameter) could be found using the following key:
/WEBM/LS//ZBSID////
This refers to the key fields in table EDP13:
RCVPRN Partner number
RCVPRT Partner type
RCVPFC Partner function
MESTYP Logical message
MESTYP Message code
MESCOD Message function
TEST Test indicator
Anyhelp will be greatly appreciated. urgent.Hi Subodh ,
You can check whetther u have released idoc and message type after u have created them. Once u have released these idoc and message types , you can use them in your scenario or they will not will be available .
U can refer to below link to check on various parameteres at time ALE-IDOC scenario
(1) /people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
(2) /people/kevin.wilson2/blog/2006/11/13/ale-scenario-development-guide
(3)http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
(4) idoc
(5)http://help.sap.com/saphelp_erp2005vp/helpdata/en/78/2178a651ce11d189570000e829fbbd/frameset.htm--
--This is for Message Control. See the Left Pane in this web page to get the ALE implementation for BAPI's also.
(6)/people/kevin.wilson2/blog/2005/12/07/changing-fields-in-an-idoc-segment - Converson Rules Guidelines
I hope this wud solve ur problem.
Regards
Note: Reward if useful -
Entry in outbound table not found
i am using we19 trying to do standard outbound processing for idoc mbgmcr02
i use receiver Port internal and partner abc01
sender Port -
and partner abc02
in we20 is set up partner
abc01 type ls in outbound parameter area i see mbgmcr
now in 19 when is use as receiver partner abc01 i get the following error
entry in outbound table not found
/abc01/ls//mbgmcr message no 400 id E0
can anyone direct me to what i am doing wrong?????????????????/Hi Janice,
See these..
http://help.sap.com/saphelp_erp2005vp/helpdata/en/71/9bbdde2f66454bb9771170369bae81/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/2d/f371e4d24a11d289810000e8216438/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/dc/6b80c243d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/f0/08ef0d06b111d286e2080009b98822/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
cheers,
Prashanth -
Entry in outbound table not found in PFAC
Good day all.
I'm facing an error "Entry in outbound table not found" when I try to create assignment PFAC (Responsibility Rules).
Any body have an answer to solve this issue?Are you trying to do something related to IDOC/Partner profile related responsibilities?.
-
IDOC OutBound Error 29: Entry in outbound table not found?
Dear All,
I configed the customized IDOC,and used BD64,WE20 Generate Partner Profile.the partner type is u2018LSu2019,In We20,I clicked the check button .There is no error in check.Other config also correct.
My outbound program main code is :
WA_IDOC_CONTROL_RECORD-MESTYP = 'ZMSGTYPE_WE81'.
WA_IDOC_CONTROL_RECORD-IDOCTP = 'ZIDOCTYPE_WE30'.
Receiver
WA_IDOC_CONTROL_RECORD-RCVPOR = 'A000000003'. "Port
WA_IDOC_CONTROL_RECORD-RCVPRN = 'target100'. "Partner number
WA_IDOC_CONTROL_RECORD-RCVPRT = 'LS'."Partner type
WA_IDOC_CONTROL_RECORD-RCVPFC = 'LS'."Partner function
Sender
wa_idoc_control_record-sndpor = 'A000000001'. "Port
wa_idoc_control_record-sndprn = 'source500'. "Partner number
wa_idoc_control_record-sndprt = 'LS'. "Partner type
WA_IDOC_CONTROL_RECORD-SNDPFC = 'LS'."Partner function
DATA L_ITEM TYPE I.
LOOP AT GT_IDOC.
L_ITEM = L_ITEM + 1.
WA_EDIDD-SEGNAM = 'ZSEG_WE31'.
WA_EDIDD-SEGNUM = L_ITEM.
WA_EDIDD-SDATA = GT_IDOC.
APPEND WA_EDIDD TO IT_EDIDD.
ENDLOOP.
CLEAR L_ITEM.
SORT IT_EDIDD BY SEGNUM.
CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE'
EXPORTING
MASTER_IDOC_CONTROL = WA_IDOC_CONTROL_RECORD
OBJ_TYPE = ''
CHNUM = ''
TABLES
COMMUNICATION_IDOC_CONTROL = IT_COMMUNICATION_IDOC_CONTROL
MASTER_IDOC_DATA = IT_EDIDD
EXCEPTIONS
ERROR_IN_IDOC_CONTROL = 1
ERROR_WRITING_IDOC_STATUS = 2
ERROR_IN_IDOC_DATA = 3
SENDING_LOGICAL_SYSTEM_UNKNOWN = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.hi Sun,
The value 'X' means ABAP_TRUE, which means the outbound ALE settings for your message type are OK.
Did you check the sy-subrc value after the FM 'MASTER_IDOC_DISTRIBUTE' is called ? and if yes what is the value ?
Also did u check the IT_EDIDD table, whether is contains any values ?
If all of the above is fine then call the FM 'EDI_DOCUMENT_DEQUEUE_LATER' by passing the document number of the outbound IDoc created, this number you will from the 'communication_idoc_control' table which you need to pass to your FM MASTER_IDOC_DISTRIBUTE.
for your reference attached is code for it
CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE'
EXPORTING
master_idoc_control = wf_edidc
TABLES
communication_idoc_control = int_comm_cntl
master_idoc_data = int_edidd
EXCEPTIONS
error_in_idoc_control = 1
error_writing_idoc_status = 2
error_in_idoc_data = 3
sending_logical_system_unknown = 4
OTHERS = 5.
if sy-subrc = 0.
APPEND LINES OF lt_idoc_comm_control TO g_idoc_comm_control.
endif.
LOOP AT g_idoc_comm_control.
CALL FUNCTION 'EDI_DOCUMENT_DEQUEUE_LATER'
EXPORTING
docnum = g_idoc_comm_control-docnum.
ENDLOOP.
{/code}
hope this will solve your problem
Edited by: Ashwinee on Dec 26, 2008 12:09 PM -
5 IDOC with status 29 Error in ALE service
hi there,
im looking at this similar problem with less information on me the only info i got is this can anyone help me out pls
IDOC Status Outbox:
IDOC failure between 13/07/2008 to 14/07/2009
1 IDOC with status 02 Error passing data to port
5 IDOC with status 29 Error in ALE service
IDOC Status InBox:
88 IDOC with status 51 Application document not posted
regards
rajuHi,
Check this thread.
DB13-DBCHECK by saving log-throwing DUMP:TSV_TNEW_BLOCKS_NO_ROLL_MEMORY
Regards. -
IDOC error : Entry in inbound table not found
Hello all...
Iam gettin IDCO error when im processing inbound IDOC
(basic type :FIDCCP02 and message type:FIDCC2) like..
<b>"Entry in inbound table not found..."</b>
<b>in diagnosis:
Noinbound partner profile could be found with the following key:
/XXXHUB/LS/LS/FIDCC2//// ..</b>
but:
I maintianed XXXHUB in logical system ( tcodeSALE ) and
in WE20 i maaintianed the parner profile in partner type LS with partner number XXXHUB and also added message type FIDCC2 with process code FID2 ...
what else need to do/configure?....
let me know if u need more info...thnaks..Thanks guys...for your answers...
there was some problem with message variant i assigned in the inbound parameters of sending system( XXXHUB)in the partner profile..( we20)...now i removed it...it is working fine..
so what's the problem if I assign the message varaint.do i have to declare the message variant anywhere?....
one more thing...
iam receiving idoc from XXXHUB to my DEV client200...i want to make clear which parameters(inbound/outbound) i have to maintain in WE20
for sender : XXXHUB (parter type LS).... inbound or outbound? ( i maintained both)
for recipient :DEV200 ... inbound or outbound?(i maintained inbound)..
Thnaks.... -
Entry in inbound table not found
There is a typical problem here. R3 is recieving IDOCs from other (SRM) systems.
But the sender's(SRM) partner name is not there in R3. The present IDOCs are getting failed with status 56 and message " Entry in inbound table not found" Please help me out..Sending partner (number) is not there...so U cannot have partner profile..
-
Status 29:error in ale service layer
i have written a stand-alone program in ale to transfer materials to inbound system.idoc got genereated but i am getting staus record as 29...
what to do if i get an status 29:<b>error in ale service layer</b>Hi Pavan ,
Goto to transaction WE05 put the Idoc Number generated or enter the message type .Under the Status 29 there would be error description .
Check that out . -
Regarding Getting Error in Idoc .... Outbound table not found
Hello everyone
I am working on ALE/Idoc, at the last i am getting error that idoc has created but cannot be send, I am using XML port (not file) so giving Physical Dictionary, please solve my problem where i have to change. please reply its urgent.
Thanks & Regards
Vimarsh B.Dear,
The addon is a third party addon which was developed by CitiXSys. so the support is provided by the partner who developed the addon.
Go to the vendor Citixys for further support will give you a quick reply.
Regards
Apple
Maybe you are looking for
-
How to specify the charatcer encoding for the parametes Content-Disposition
I want to download a file with chinese name . response.setHeader("Content-Disposition","attachment; filename=" + fileName); the above part of code is working fine for english file names. but i am facing problem when i try to get file with chinese nam
-
Hello Everyone, I am trying to schedule a Crystal Report through Central Management Console but running into an issue when my data source is a .CSV file. The report is a merger of three data points, A SQL database via ODBC Connection and two .CSV fi
-
Synchronize IR columns via plsql API
Hi! I would like to use the package wwv_flow_worksheet_standard to synchronize the IR columns in my application out of plsql. Reason: My IR are based on views (simply: Select * from view_name) I have lots of them and they change frequently via plsql
-
Sound card driver windows 7/64 for HP6270
I did a clean install on my HP6270 with windows 7/64 cant get the sound to work or the card reader maybe more soon to be added. {hp pavilion zv6000 zv6270us} tried to mod the driver 30399 USCG RET Don This question was solved. View Solution.
-
Multicast mac-address Nexus 7k
Hi, i'm going to use Nexus 7000 in Data Center. During analysis configuration, I need define mac-address-static configuration for multicast mac address for Firewall Checkpoint cluster. In "Layer 2 Switching Configuration Guide, Release 4.1.pdf" docum