Status 29 when creating and distributing IDocs

Hi all!
I try to create IDocs for distribution via MASTER_IDOC_DISTRIBUTE without providing a specific receiver.
The distribution model contains for my message type a distrubution and generated partner agreements. In one example this is a bapi for a message type, in another example this is a message type directly.
I get in BD87 the status 29 but i have no idea why the receiver could not be determined, as explained in the3 belonging message B1 003.
Thanks for any hint.

Hi Ferry, hi Nilesh,
the partner agreements are ok.
We were sure yesterday, that there was no difference for the bapi example and for the message type example. Today we found a result for the message type example what was our example to compare with.
The example in focus is a bapi with the message type VCUI_SAVEM coming from business object BUS1401. I do not understand the difference between directly assigned message types in BD64 and indirectly assigned message types belonging to a assigned bapi when reading the documentation.
When debugging the suggested modules i found out, that with bapis the message type is not contained in table TBD05 and nothing else is considered there.
So the question is, what is the difference between bapi and message type assignement in this case and what is to do to use the distribution model with a bapi without providing the receivers by the caller.
Thank you so far.

Similar Messages

To see the username and datetime who/when created and who/when last updated the record

Excel Addin and Web UI future:
We need to see the username and datetime who/when created and who/when last updated the record.
We need these columns in tables (as shown columns with status error)
from Moscow with money

Vincent,
By the way, Just this week
we have +20 MDS-users
from Moscow with money

HT5295 What are the basics of creating and distributing Podcasts?

What are the basics of creating and distributing Podcasts?

Search the web for "creating podcasts" and you'll find a plethora of information.
Regards.

Create and Distribute Forms in Acobat Standard

Hi,
A customer has asked if it is possible to Create and Distribute Forms in Acrobat X Standard, the same way as is possible
in Acrobat X1 Pro as we are using?
thanks
Paul

Yes it is. Here's a link to the Acrobat X Standard help file: http://help.adobe.com/en_US/acrobat/X/standard/using/index.html
Specifically: http://help.adobe.com/en_US/acrobat/X/standard/using/WSB53E4545-865B-4e2e-9C87-C98847DE53A C.html

I created and distributed my form. How do I see and print the returned form?

I need to know how I can print the returned form?
Thanks

Yes - in both the "Basic" and "Plus" level account you will be able to "Download Response as PDF Form" which downloads a PDF that looks like the original form filled out. There are a few caveats to that, the layout may change in the PDF to accommodate fields where the text input was larger than the field, the field will "grow" to display all of the text so it can be printed correctly. Also, attachments would not be included in the downloaded PDF response.
Have a look at this PDF since it goes over designing for PDF, and the information on "Page Breaks" in "Page View" will apply to any PDF saved from the form (not only for distribution, but also the Response PDF), you will want to use that info to add Page Breaks in Page View for your downloaded PDFs: Tutorial: Creating and distributing fillable PDF forms
There are a lot of good FAQ's here as you get started using your subscription: Frequently Asked Questions
There are even more helpful documents here: FormsCentral
Thanks,
Josh

Send idoc when bp created and receive idoc from external

I am sap abap developer and am new to CRM technical side.
*****my requirement is : when we create business partner and save it then i need to send that as an idoc to 3rd party theru ESP system.
I planned to create BP using BAPI BUPAFS_FS_CREATE_FRM_DATA01 and generate idoc in CRM and should send to ESP. They will send to 3rd party and collect some data from tham and they have to generate idoc using BAPI which i specify (I dont know which bapi) and send to us. But i dont know what bapi i have to used at ESP to generate and send idoc from ESP to CRM. Is am not sure how to use bapi exactly.
Please help me out as soon as you can. I was struct in project.Urgent

Hi Mehar,
SAP CRM supports this functionality in the standard. All you need is some customizing to get changes in CRM mapped to an outbound IDOC and send it out to an external system.
Inbound is also covered. You can post IDOCs to the CRM system using an inbound port. No need to call a BAPI, you can create the IDOC externally and simply post it as a file to the CRM system.
Alternatively, you can use XML to achieve the same.
I've sent a configuration document to your email address. In it you will find all you need to perform the customizing for a working XIF scenario.
Get back to me when you get stuck.
Regards,
Michael.

PE2 hangs with Windows 7 when creating and exporting files

My computer running WinXP just broke down on me for the 2nd time in 7 years, so I finally decided to upgrade. I put it off because I was afraid of windows 7 having compatibility issues with my old software, and now I'm having trouble with Premiere Elements 2. After it opens up I can cancel and exit but if I try to create a file it stops responding. The tutorial opens up as if there's no problem and it plays on the timeline like normal. When I tried to export that sample video the computer hung for a long time before letting me change the output settings. The file rendered at a normal speed, and the exported video looks fine. Since then I've transferred my old files and have no problem working with them or importing new media to an existing file. It's just creating and exporting that causes problems. I'm using Windows 7 home premium, 64 bit.

Have you tried right-clicking the application icon and setting it to run in XP compatibility mode?
If not you could install a Virtual Machine to run using your existing XP Licence. Or upgrade your W7 to Professional/Ultimate that includes Virtual XP Mode.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Send as email attachment the billing document as pdf when created and saved

HI All,
I have already searched the forum but could not find a satisfying answer so i am posting this question,
The requirement is to send an email containing biiling document converted to pdf format when a billing document
is created and saved in VF01 transaction.
I have already converted the output to pdf format in my driver program and also know how to send an email containing the same ..but this works only when user prints using VF31 .
Kindly tell the configuration steps which are required...and hot to achieve the same.
Regards,
Prateek

Hi Prateek,
There is a blog on a similar topic which explains how to email purchase order in SAP to the vendor. The settings are required in Vendor Master, NACE and SCOT.
Following is the link to it.
http://architectsap.com/blog/sap/sap-mm-purchasing-send-purchase-order-by-mail-to-vendor-in-sap/
It has given steps to trigger the output.
Its not exactly what you require, but might be helpful.
Regards,
Abhijeet Kapgate

Dump when creating and saving organization and contact

Hi experts,
I have a dump in WebUI when I try to create and save organization and contact.
The problem is not in the saving but in the validation of address that i entered.
When I put a value for example on street number, then I change it, the system check if there was relevant modifications.
So, the system call the method compare_fields_of_addresses of the Class CL_GEOCODER:
check given attributes of ADRC_STRUC
LOOP AT fieldnames INTO lv_fieldname.
get attribute value of first address
    ASSIGN COMPONENT lv_fieldname OF STRUCTURE address1 TO <fs1>.
get attribute value of second address
    ASSIGN COMPONENT lv_fieldname OF STRUCTURE address2 TO <fs2>.
compare values
    IF <fs1> <> <fs2>.
    if different, add to table of different fields
      APPEND lv_fieldname TO different_fields.
    ENDIF.
ENDLOOP.
fieldnames : contains all the fields of Structure ADRC_STRUC from table DD03L
address1/address2 : contains data of the above adress with structure ADRC_STRUC from DDIC(se11)
ADRC_STRUC contains specific fields and in DD03L, it insert field .INCLU--AP
in DDIC, it insert field .APPEND
to say that there are extended fields.
So, there is normal dump because we try to compare field symbol that is not assigned
Could you help me to resolve it please? As I know, we don't have rights to modify standards methods.
Best regards.

Hi everyone,
I have found solution in OSS notes : 1561501 - GETWA_NOT_ASSIGNED in CL_GEOCODER
So I will close my thread and thank everyone.
I want to share this solution if there will be other people facing the same.
Regards

Force an error against an order when creating a Distributed Sales Order...

We're raising Distributed Sales Orders via IDOC (Type ORDERS05). There are however certain bueiness checks (which probably should be made at the order level but are not) being checked for by the IDOC processing code. When certain checks fail I need to ensure that the IDOC is updated with a suitable error messagem but also that the Sales Order fails and therefore does not get distributed through to SAP. Is there a standard way for forcing an order to fail, or should the sales order itself check this and fail the order. Are our Functional people just being idle ?.
Gary

We're raising Distributed Sales Orders via IDOC (Type ORDERS05). There are however certain bueiness checks (which probably should be made at the order level but are not) being checked for by the IDOC processing code. When certain checks fail I need to ensure that the IDOC is updated with a suitable error messagem but also that the Sales Order fails and therefore does not get distributed through to SAP. Is there a standard way for forcing an order to fail, or should the sales order itself check this and fail the order. Are our Functional people just being idle ?.
Gary

Acrobat Help | Creating and distributing PDF forms

This question was posted in response to the following article: http://helpx.adobe.com/acrobat/using/creating-distributing-pdf-forms.html

Unless I am reading this incorrectly, in Acrobat Help, webpage http://helpx.adobe.com/content/help/en/acrobat/using/creating-distributing-pdf-forms.html, it looks like step 5 under header "Distribute (send) forms to recipients" is incomplete. Step 5 ends with "...do one of the following:" and that is simply followed by a notation, not two steps.

How can I remove an icon from the status menu when command and drag doesn't work?

I am trying to remove a status icon for an application I uninstalled. When I try to drag it, nothing happens, so removing it by the "command"key & drag method isn't effective. Is there another way I can get rid of it?

A status bar item should go away when the application quits, otherwise it belongs to some other helper application that is still running. Using a launch agent or something like that for a status bar item may or may not be the most user friendly thing, but it's no hack - there are Cocoa API's for status bars. If anything, the Menu Extras provided by Apple are the hacks, but I digress.

I done on the apple befor 3 year an apple account and i using it for the last one week and i rong and do the a new account and but the same email when creating and the apple verfy it , thats make me cant accses to activate my iphone

i cant acces to activate my iphone because my email was on my iphone icloud and i dont know how but i delete this account from apple and vrffing it again but now when i wanna to activate my iphone they tell me this email cant verffing the iphone what i can do , please i bought it new please help me help me help me
<Email Edited By Host>

Welcome to the Apple Community.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")

Creatin and posting idocs in same client

Hi ,
This is laxman,
My requirement is , when the customer create sales order i want create one more sales order with some changes in same client.
i am using the inbound and outbound idoc with orders message type and process code sd10 for outbound idoc , and i have created new process code for inbound .
and i have created logical sys for client 030 and one more dummy logical sys with ports .then generating the partner profile everything ok.
i am trying to distribute model view while i got error ,model view has not been modified reason is distribution model currently being processed.
Outbound IDoc was created and inbound IDoc was created with status 56(IDoc added with errors ).
means my function module is not triggered.
How can i solve this prob.
have any alternative code for this object.
please help me.
Thanks & Regards
laxman

laxman,
i would highly advise you to post this message over at the ABAP forums, located here:
ABAP Development
if, by chance, a moderator sees this, i guess they can do the necessary transfer too. =)
ryan.

How to change the UDT's Status other than Open and Close ?

Hello Friends,
I have created an table of document type and I want to set the document Status other than open and close for eg.R- Released .
Thanks in advance.

I think if you're using a UDF to set this Status for Marketing documents
First you need to set what item corresponds to each Status level you're tryinf to deploy
After that you can use SDK to set this new property or Formatted searches to change the Status you re creating, and save the document as a draft during your process and your status.
But if you're trying to change the fiel Status used on every Marketing document (i mena the system one), you should know that it is impossible 'cause this is an only read system field.
Hope it helps
Gabriela

Status 29 when creating and distributing IDocs

Similar Messages

Maybe you are looking for