Status 56 - IDOC with errors added

Hi everyone,
I was configuring File to IDOC Scenario, in the receiving R/3 system, i am getting error as Status 56 - IDOC with errors added "EDI: Partner Profile not available".
but i had already created Partner profile in WE20.
Regards,
Varun Reddy.K

Hi Varun,
The below link will help u in solving u r problem
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e07dcaa0-a92b-2a10-3a96-b3d942bd1539
Just try follow the steps followed in above mentioned link
And also check u r RFC connection in TC "SM59".
Reward with ponits if helpful
Regards
Sai Ganesh

Similar Messages

Issues in IDoc Sender Scenario:IDoc with errors added

Hi all
Am working on an IDoc to JDBC scenario. In R/3 system, I have created distribution model, partner profile, RFC destination and port.The IDoc is generated and is sent to XI successfully. But in XI , there is no entry in SXI_MONITOR for this (unfortunately IDX5 is not available in the XI server! ;as of now). Instead an entry is made in WE05 and WE02 with stautus 56(IDoc with errors added). In the status record:
status 56 : External segment name E2KOMG003 cannot be interpreted
status 60 : Basic IDoc type COND_A03 could not be found.
And the segments displayed in data record are different from the segments in the data record of the IDoc generated at R/3. (say for E1KOMG at R/3, E2KOMG003 in XI).Earlier the flow was working fine and the DB table was updated successfully. And the entire stuff is believed to be 'unmodified' .
Would any one help in resolving the issue.
Thanks,
Chilanka

Hi,
>>>>I have created partenr profile in R/3.Need I create a partner profile in XI for R/3 system?
no you cannot create any partner profiles in XI
for more about IDOC configuration in XI check :
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi">Mastering IDoc Business Scenarios with SAP XI</a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Post system refresh, "Request IDoc : IDoc with errors added"

Hello All,
Post system refresh, we are not able to execute the data loads.
While loading the Infopackage, the overall status is still showing in YELLOW status. but in the Transfer (IDOCs & TRFC), it shows an Error message as "Request IDoc : IDoc with errors added"
Yesterday immediately after the refresh, we were able to execute the master data loads (full loads)...
However, transaction loads (delta) is facing issues.
Today, we are facing the problem in both master and transaction data.
Please help!!!! Its a very critical issue!!!
Edited by: Siegfried Szameitat on Aug 9, 2011 10:17 AM

Hi,
While selecting the Infopackage to run the INIT load, it is taking me to the ECC login screen. Once i enter my credentials, its showing a dump with the message:
Short text of error message:
No RFC authorization for user XXXXX ( RSA8 ).
Long text of error message:
Technical information about the message:
Message class....... "RSAR"
Number.............. 051
Variable 1.......... "No RFC authorization for user XXXXX ( RSA8 )."
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Please advice.
Regards
sneha

Error in Receiver - IDoc with errors added

Hi All,
I am getting error in 56 - IDoc with errors added in receiver System.
I am new in Idoc - please tell me How to resolve this issue..
Thanks in advance..

Hi all thanks for reply .
All are the help full answer ,
I use T-code WE19 and change partner profile and execute now it is fine.
But i have checked all configuration regard partner profile from T-code WE20 it looking everything is fine but in Test tool for Idoc Processing by t-code WE19 i have checked it will taken wrong partner profile detail after giving correct manually now it is working fine.

SAP CRM IDoc with errors added

Hi Experts,
I am facing some issues related to IDoc processing.The errors I am facing while IDoc processing are as follows:
1)E0(332) : EDI: Partner profile not available with IDoc status 56 & Idoc number 53
2)HRMD_ABA with IDoc status 52 & IDoc number 1
                       5-(000) : HR: ALE inbound processing for HR master data (Idoc No1)
3)HRMD_ABA 22 with Idoc number 22
                       B1(005) : & &, &, &.
                             No filters, Fields converted, No version change. (Idoc No 22)
Kindly provide me the solution through which I would be able to rectify the failed Idocs.
Thanks
Warm Regards
Vineet Joshi

Hi Vineet,
Maintain Inbound/Outbound partner profile using tcode WE20.
Thanks,
Balaji P.

Idocs with errors added status-56 in file to idoc scenario- how to rectify

hi ,
in file to idoc scenario when i m sending the file from ftp server to IS Retail, file is successfully getting processed but the idoc is showing error ,when we see using WE05 tcode or BD87 , pl sugggest how to rectify it to make the status 53

Hi,
Have you configured the partner profile details? check these steps..
1. In the receiver system you must configure the partner profile for your sender system in WE20.
2. Add the IDoc message type to inbound parameters of the partner profile and configure the appropriate process code.
2. Fill the Logical system name for your senderservice-->Adapter Specific identifiers in ID.
<a href="/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi File-to-IDOC Scenario</a> By Venugopalarao
<a href="/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi Steps for Posting IDOC's</a> By Ravikumar Allampalam
Regards
San

Idocs with error status

Hi Everyone,
How to find all idocs with error status for a given date range?

Hi,
Please refer EDIDS for Status and EDIDC for control records.
Also refer the below wiki page for details.
http://wiki.scn.sap.com/wiki/display/ABAPConn/IDoc+Overview
Thanks,
Karthik

Inbound idoc with error status 52 messege type hrmd_a07

i have an inbound idoc with status 52
error messege : Object 01 ,P ,00056786 does not exist: infotype 0302 cannot be created
Object 01 ,P ,00056786 does not exist: infotype 0006 cannot be created
i debugged but i haven't find out the reason
am updating 0000,0001,0002,0003,0006 infotypes

Hi rahul,
Need to check the address filed (0006) for BP mapped to postion (00056786)
Infotype 0302 (Additional Actions) :
Infotype 0302 is not maintained directly and is automatically updated by Infotype 0000 .
The additional actions Infotype (0302) is of time constraint 3 (gaps and overlaps).
Specifically in some cases if we want to have a non status-changing Action on the same day where already a personnel action is existing at that time we can activate the Infotype 302 by executing Report RPUEVSUP.
please check and let me know . I think it will be helpfull
Thanks and Regards,
Krishna

File to Idoc with error in trfc

Hello,
I have a scenario like
File -> XI -> (idoc) R3
The scenario works fine but yesterday I had a problem with the user in the rfc destination(pwd wrong) which is used for the idoc-adapter. In the sxmb_Moni and the RWB the msg. got an success flag/info but it was not delivered to the r3 because the rfc-destintion could not work.
I know that the idoc-adapter is not part of the adapter-engine and my understanding was that the adapter send his status back to the integration engine. But in this cause I got no feedback from the adapter. I think this is not Ok or I am wrong ?
Regards Jami

Hi Jami,
The reason is simple.....the message is sent from the integration server to the adapter engine which was susessful.but what went wrong is the rfc destination being wrong in the receiver adapter which is not known to the integration server. So in simple words, if things work fine in your integration server then it will not throw an error in your sxmb_moni. So had there been a problem between the message transfer from the integration engine to the adapter engine then it would have surely given you an error in your sxmb_moni(for example you specify some wrong parameters while configuring your receiver IDOC adapter).
But in this case since we dont have an IDOC adapter in the component monitoring (it has adapters which are in the JAVA stack only but IDOC adapter is in the ABAP stack)we can see the error in SM58 only.
I hope this answers your question fully. If any other doubts regarding the same pls do ask me.
Regards,
Abhy
Message was edited by: Abhy Thomas

Idoc with error message when coming from middleware but not in we19

Hi Experts
I am facing a very strange issue !
I have a Z - Idoc type and corresponding inbound function module for creating schedule lines i.e. doing something what me38 does.
When my middleware i.e. Mercator Websphere is sending the idocs, they fail with the error message in the status record as
Field EKET-MENGE (19) does not exist in the screen SAPMM06E 1117.
But when I try processing the same idoc using we19, the scheduling lines are created and the schedule agreement is changed.
Is there any difference between we19 and when idocs come from the middleware ?
Points would be rewareded if useful answers received.
Regards
Shubhankar

Well i think that the problem is with your BDC. there is an option to use standard size in BDC. I think your table control falls short of 19 rows in your program. Please see the thread below and incorporate the same changes in your BDC. I think u might need to record the BDC again.
Re: BDC tabel control for QE01
DATA OPT TYPE CTU_PARAMS.
OPT-DEFSIZE = 'X'.
CALL TRANSACTION 'FB01' USING ITAB OPTIONS FROM OPT.

IDoc with error when trying to update two materials with FM: CSAP_MAT_BOM_MAINTAIN.

Hi
In my current project I am facing the below issue.
In client MDM team is creating the master data. The BOM master data also creating through MDM only. The function module used is CSAP_MAT_BOM_MAINTAIN. When user trying to update the two extra BOM line items getting an error " Error while saving the BOM."
In SLG1 transaction we observed that the IDOC is trying to change the header level data. After analyzing I got some conclusion that
while BOM creation header level material and all components are created with change number reference. When the user trying to update two extra line items with new change number system giving error msg as idoc trying to change header level data. As my knowledge with FM:CSAP_MAT_BOM_MAINTAIN no changes possible for header. I came to conclusion as header is updated with a change number while creation and when we changing second time with new change number, system not able to replace the old change number with new change number.
To correct this IDOC what steps i can perform? Is it possible to reprocess this IDOC by changing any field values like MSGFN.
Please suggest what solution we can provide to reprocess this IDOC.
Regards
Kesava

Hi Rupesh
Thanks for the replay.
Here the user created the BOM with the same FM:CSAP_MAT_BOM_MAINTAIN but he created with change number refernce. This change number is updated in header. Later he wants to add some extra components to this BOM with the same FM:CSAP_MAT_BOM_MAINTAIN and he entered new change number second time to do the change. Then system giving an error status for this IDOC.Then if we check in SLG1 the error message is we are trying to change header fields which is not possible " The BOM header can only be displayed, Your entries were ingored". How can we reprocess this IDOC.
Regards
Kesava

WSUS (3.0 sp2 or 3.2.7600.226) computers not reporting status - on W2k8R2sp1 with error 8007efe

Standard defaul WSUS install using all setup defaults. (port 80) no errors on server side app, sec or sys logs. no iis logs.
pasting the links below from the client into IE and they all get "internet explorer cannot display the web page"
but the client windows update logs show:
2014-01-08 13:20:34:835 1012 10b8 PT WARNING: Cached cookie has expired or new PID is available
2014-01-08 13:20:34:835 1012 10b8 PT Initializing simple targeting cookie, clientId = fbca9f1e-f2ae-478a-a8a2-26ae0143d786, target group = , DNS name = workstation.domain.name
2014-01-08 13:20:34:835 1012 10b8 PT Server URL = http://
server/SimpleAuthWebService/SimpleAuth.asmx
2014-01-08 13:20:53:186 1012 10b8 Misc WARNING: Send failed with hr = 80072efe.
2014-01-08 13:20:53:186 1012 10b8 Misc WARNING: SendRequest failed with hr = 80072efe. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2014-01-08 13:20:53:186 1012 10b8 PT + Last proxy send request failed with hr = 0x80072EFE, HTTP status code = 0
2014-01-08 13:20:53:186 1012 10b8 PT + Caller provided credentials = No
2014-01-08 13:20:53:186 1012 10b8 PT + Impersonate flags = 0
2014-01-08 13:20:53:186 1012 10b8 PT + Possible authorization schemes used =
2014-01-08 13:20:53:186 1012 10b8 PT WARNING: GetAuthorizationCookie failure, error = 0x80072EFE, soap client error = 5, soap error code = 0, HTTP status code = 200
2014-01-08 13:20:53:186 1012 10b8 PT WARNING: Failed to initialize Simple Targeting Cookie: 0x80072efe
2014-01-08 13:20:53:186 1012 10b8 PT WARNING: PopulateAuthCookies failed: 0x80072efe
2014-01-08 13:20:53:186 1012 10b8 PT WARNING: RefreshCookie failed: 0x80072efe
2014-01-08 13:20:53:186 1012 10b8 PT WARNING: RefreshPTState failed: 0x80072efe
2014-01-08 13:20:53:186 1012 10b8 PT WARNING: PTError: 0x80072efe
2014-01-08 13:20:53:186 1012 10b8 Report WARNING: Reporter failed to upload events with hr = 80072efe.
2014-01-08 13:20:53:186 1012 10b8 Report WARNING: Discarding a batch of 1 events because they have expired.
2014-01-08 13:20:53:217 1012 10b8 PT WARNING: Cached cookie has expired or new PID is available
2014-01-08 13:20:53:217 1012 10b8 PT Initializing simple targeting cookie, clientId = fbca9f1e-f2ae-478a-a8a2-26ae0143d786, target group = , DNS name = workstation.domain.name
2014-01-08 13:20:53:217 1012 10b8 PT Server URL = http://
server/SimpleAuthWebService/SimpleAuth.asmx
2014-01-08 13:20:55:510 1012 10b8 Misc WARNING: Send failed with hr = 80072efe.
2014-01-08 13:20:55:510 1012 10b8 Misc WARNING: SendRequest failed with hr = 80072efe. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2014-01-08 13:20:55:510 1012 10b8 PT + Last proxy send request failed with hr = 0x80072EFE, HTTP status code = 0
2014-01-08 13:20:55:510 1012 10b8 PT + Caller provided credentials = No
2014-01-08 13:20:55:510 1012 10b8 PT + Impersonate flags = 0
2014-01-08 13:20:55:510 1012 10b8 PT + Possible authorization schemes used =
2014-01-08 13:20:55:510 1012 10b8 PT WARNING: GetAuthorizationCookie failure, error = 0x80072EFE, soap client error = 5, soap error code = 0, HTTP status code = 200
2014-01-08 13:20:55:510 1012 10b8 PT WARNING: Failed to initialize Simple Targeting Cookie: 0x80072efe
2014-01-08 13:20:55:510 1012 10b8 PT WARNING: PopulateAuthCookies failed: 0x80072efe
2014-01-08 13:20:55:510 1012 10b8 PT WARNING: RefreshCookie failed: 0x80072efe
2014-01-08 13:20:55:510 1012 10b8 PT WARNING: RefreshPTState failed: 0x80072efe
2014-01-08 13:20:55:510 1012 10b8 PT WARNING: PTError: 0x80072efe
2014-01-08 13:20:55:510 1012 10b8 Report WARNING: Reporter failed to upload events with hr = 80072efe.
Client diagnostic output show all pass except at:
useWuserver is enabled .... pass the error message:
VerifyWUServerURL() failed with hr=0x80072efe
the connection with the server was terminated abnormally
end
any input is appreciated. Many Thanks

First, per the subject line, if your WSUS server really is still Build 226, then you need to patch it, and that would likely account for client connectivity issues.
VerifyWUServerURL() failed with hr=0x80072efe
Second, the 0x80072EFE error, specifically, is a connection aborted error.
Something is breaking the connection between the client and the server. The client is not using a proxy server. Does it need to use a proxy server? Are there any other devices (routers, web filters, etc.) between this client and the WSUS server? Are they
on the same IP Subnet?
0x80072EFE
-2147012866
ERROR_INTERNET_CONNECTION_ABORTED
The connection with the server has been terminated.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

How to edit data from an IDOC with errors and reprocess it

Hi,
We are working with SAP XI for communicate with an external systems by files (external) to IDOCS (SAP R/3).
Sometimes we need to edit the data from an inbound IDOC, because the external system generates wrong information and that can't be processed directly.
We had seen posts like:
But we wanna to do it with no ABAP editor.
¿Can we change the data from the IDOC in other way (transaction) and reprocess it?
We tried with /WE05, pushing EDIT button, but can't edit the data from the IDOC.
Thanks in advance for your help
Regards,
Federico Martin

Keep Looking at forums i founded:
change idoc data
To change the Inbound IDoc,
1)Go to WE05/WE02, enter the Inbound IDoc number and Execute.
2)Double Click on the segment (Page Icon) where you want to change the Data.
3)In the Screen 'Display data record for IDoc' , Go to menu 'Data record' and click on 'Display - > Change'. Then it display a popup information 'Changes to the IDoc are written to the database' , then press enter .
To Process the Edited Inbound Idoc , execute the program 'RBDAGAIE' in SE38 and enter the IDoc number.
Thanks
Sekhar
AND
/people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
Also if you have something to say about it will be appreciated
thanks

Idoc inbound error status code 56

Hi,
   when i am sending custom idoc from source system to destination , idoc sent successfully from source system .But in the receiver system idoc status code is 56 ( idoc with errors added) .
partner profile also available in the receiver system. How to solve the error.can any one pls give me the solution.
                                                                                Regards,
                                                                                Suhash.

Hi,
Check this link..[IDOC Status code 56 !!   |IDOC Status code 56 !!]
[Re: Status 56 - IDOC with errors added   |Status 56 - IDOC with errors added]
Edited by: Avinash Kodarapu on Mar 19, 2009 4:55 PM

IDocs with incorrect status

Hi !
When i tried to upload data from R3 to BW based on generic DataSource
( function module ) , in the monitor i get the following error :
Status code : 56. Description: "Idoc with error added" .
How can i get more details about the error? How To correct the Error ?
Thanks
Moshe

Hi,
it's IDoc with errors added
check if you have any errors in other stauses
and display 56 (double click) in WE02
you should see some more descriptions .
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
Refer
https://forums.sdn.sap.com/click.jspa?searchID=4344391&messageID=3662902
Foe more information, please check this links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
rEGARDS

Status 56 - IDOC with errors added

Similar Messages

Maybe you are looking for