Status Adapter Engine

Hello Guys!
I'm having the following error in the RWB, > Component monitoring > Adapter Engine ..> Result of self-test
Internal error: system status for cluster nodes 477459051 not available
can you send me help about this Error?
Thanks in advance.
Notes: We are using the Netweaver 7.1
Edited by: ecruz2010 on Oct 12, 2011 3:44 PM
Edited by: ecruz2010 on Oct 12, 2011 3:45 PM

Hello,
If you go to the NWA: Operations Management > Systems > Start&Stop > Instances
you can check there the Instance status
Sarah

Similar Messages

Help!Cache status of object for Central Adapter Engine is incorrect

this problem cconfused me several days!
version:PI 7.1
after i activate the communication channel, the cache not update for central adapter engine
problem: in cache status overview, the update for central adapter engine not yet started, but notification is ok.
the update for integration server and mapping run time are all correct.
then when i display wsdl for sender agreement(SOAP sender), show message:Cache status of object abcd123 for Central Adapter Engine is incorrect
if i ignore this message, error message popup:dapter Engine af.xid.sapittest for communication channel abcd123 not registered in SLD
who can help me solve this problem.
thank you in advance.

Hi cheng,
Kindly check if you have set theparameter 'com.sap.aii.connect.integrationserver.sld.name' in your
Exchange Profile, since it's not set by default. Open note #1278563 and follow the procedures.
And you may check the following notes:
#1031321 - Self-Registration of Adapter Engine and RWB fails
#1334053 - No automatic PI 7.10 SLD Registration (Here you'll see the note 764176 which you have already applied and also the note #1117249).
In RWB, is the adapter Engine "red light"? If yes, what is the specific error?
Regards,
Caio Cagnani

XI message status at Adapter engine level using a table (SAP table)

Hello Experts,
XI message status at Adapter engine level using a table (SAP table).
We want to write a custom report using ABAP so Pls tell why the status u2018Holdingu2019 and u2018To be deliveredu2019 are present in message monitoring of RWB but not in the status (MSGSTATE) field of SXMSPMAST table.
My need is to write a report to get the messages based on the these status from table level.
Please let me know the table name and field name for this and the table name for the desciption of the status of XI messages at Adapter level.
Thanks
Gopesh

Hi Gopesh,
the Adapter Engine Messaging System messages are on the Java schema,
i.e., see the following -
[XI/PI tables|https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/xi+tables]
Regards
Kenny

Messages goes into scheduled status in adapter engine

Hi all
we are doing idoc to file scenario with direct mapping. the messages are getting processed in integration engine sucessfully. the messages are getting into scheduled status in the adapter engine even when there is less load in the server.
Thiis specially happening for IDOC to file scenario only. Any help is highly appreciated
Thanks

>
> the system is quite good at the moment but the some of the messages again into scheduled status like ( 10 out of 1000 messages ) . the system is not performing at 100 % rate since some messages moves to scheduled status. Is still the performance can be improved in any other ways ?
>
This is really strange behaviour , If Communictaion channel functioning correctly then all succesfull messages should deliver to Receiver system.
Better to check payload of scheduled messages(if wrong payload obiously it goes schedule status),try to to reprocess them.
I never used XCOPY command,so no comment on that.
Regards,
Raj

Adapter Engine Message in Delivering Status

Hi All,
Any idea how to cancel/delete the messages which are in delivering status in Adapter Engine.
In my case a single EOIO message is stuck in the AE with delivering status. Other messages are flowing successfully using the same cc.
Earlier during such cases we had to restart j2ee/ stop/start AF Messaging to resolve the problem.
Just wondering if theres any other solution?
btw : The message was in delivering status because the password mentioned in the receiver channel was wrong. There were other messages which failed but the status of those messages went into "System Error". Nothing wrong with that, but just wondering why did a single message remain in the "Delivering" status.
I have already been through this thread Re: How to delete message in "Delivering" status. Only exists in Adapter Engine and didnt find/understand anything which could help me.
Thanks
Sumit

Look at these blogs,
How to deal with stuck EOIO messages in the XI 3.0 Adapter Framework : How to deal with stuck EOIO messages in the XI 3.0 Adapter Framework
XI : How to Re-Process failed XI Messages Automatically
Message stuck in Adapter Engine queue with status "Delivering"
Hope this helps

JBBD Sender - Problem with Adapter Engine - Message status Delivering -

Hi all,
I've a rare problem. My scenario is JDBC (EO) to IDOC. If the SELECT query from SQL database arrows 8000 lines, the message was sent from PI to R/3 succesfully and Idocs was generated.
But if the query is larger than 10.000 lines, the message was stopped in the sender queue in AE with status "Delivering". In SXMB_MONI I can't see the message, only in RW in Message Monitoring or Component Monitoring in Engine Status.
I've applied note Note 937159 - XI Adapter Engine is stuck, and follow this blog
/people/kenny.scott/blog/2007/08/20/messaging-system-queue-properties-after-xi-30-sp19-xi-70sp11
Using Configtool I modified these parameters (MaxConsumers). But message still puts in sender queue.
I have in PI 7.1 SPs 0004.
Any suggestions??
Edited by: Pablete on Sep 13, 2010 8:41 PM

I have the same requirement and for solving this, I have to apply a very complex select statement.
But it works perfekt for MS SQL:
select * from table where order_no in (SELECT distinct top(1000) order_no FROM table where any_clause) and any_clause order by order_no
update table where invoice_no in (SELECT distinct top(1000) invoice_no FROM table where any_clause) and any_clause
I create an IDoc for each order_no, so I have to make sure, that all lines belonging to one invoice are in the same select.
My select statement has 463 characters

Message struck in adapter engine with status Hold

Hi,
In intergaration engine all messages are processed, I have checked SMQ1, SMQ2 (no message is struck in queue)
where as messages struck in adapter engine with status Hold, I have checked this in RWB. How to resolve this?
Regards,
Krishna

Hello,
Below is some information on how to resolve this type of issue:
1 - In the RWB, expand the tray for "Configure Table Columns" - by clicking on a square at the right end of this heading.
2 - Check the checkboxes for "Serialization Context" and "Sequence Number". These should then appear in the table columns as well.
3 - Add the Serialization Context to the Extended Filter Criteria. Search the messages in status HOLD based on this new additional criteria.
4 - Sort the messages in ascending order based on the Sequence no.
5 - Check the predecessor message of the first message in status "HOLD"
Based on the following status for this predecessor messages, the actions that can be taken for the HOLD messages are:
a - Predecessor is in Failed State/System Error : Cancel/Resend the
first message in status HOLD after this. Then the remaining messages
can be cancelled/resent.
b - Predecessor is in DLVD state(delivered state) : First Holding
message can be resent/cancelled followed by the others.
c - Predecessor is in NDLV(Non-Delivered Status) : Check why the
predecessor message failed and correct the reason for the failure.
Then resend the predecessor message and then cancel/resend the
remaining HOLD messages. Alternatively, you can directly try
resending this NDLV predecessor message and see if it goes. If it
goes, then the remaining HOLD messages can be resent/cancelled.
Another option could be to cancel this NDLV predecessor message so
that it goes to FAILED state and then cancel/resend remaining HOLD
messages.
Regards,
Sarah

Message statuses in Adapter Engine

Hi,
Do we have any statuses of the message in Adapter engine?
Just a weird doubt...
Thanks,
Monica

Ok..
Assume that i have a scenario where in I need to update some data in MS SQL from SAP.
For instance, some one pushed junk data from SAP,(but this data is matching to our XML structures) and before I update this data in MS SQL, i need to validate data by connecting through JDBC adapter.
Now when I connect to database using JDBC, is it possible for me to validate the data in the adapter and if data is invalid, how can I update the IDoc status that data is erroneous?
Thanks

EO Messages with Delivering Status in Adapter Engine

Hi All,
We have a scenario DB-DB Asy with Java Proxies. Proxies are there to accept the messages from Sender DB and insert in target DB. Get the response from target DB and insert back that to Sender DB.
Actually the scenario is Syn, but we made it as Asynchronous by implementing Java Proxies.
Now we are using EO mode in Sender JDBC channel. We have 17 interfaces in the similar pattern. We are using one common XI receiver channel for all these 17 interfaces.
If one message got struck, then rest other Proxies are not getting triggered and not able to resend the message ( ofcourse I know I cannot resend with Delivering Status). But not sure what causes the messages to failed with Delivering Status mode.
Any pointers would be highly appreciated.
Will increase of Parallel Queues really solve my problem? If it fails in Prod, its a big problem for us as we dont want to lose the data. Now everytime we are restarting the Message service server.
Regards,
Srinivas

Normally if there is any problem in target then you will see the adapter engine message as delivering
after the no of retires set then status will go to system error
during this entry check the CC used what is the error causing for that ?
HTH
Rajesh

Adapter engine in red color status

Dear All,
I got pi production system.When i verified componenet in RWB everything is fine except adapter engine.
Adapter Engine in red color status.Error in Are registrations of connections and protocol handler without errors?
I clicked on details.Please see below
13 of 23 connection(s) registered successfully(it was showing 5 of 23 success after i restarted it's showing 13 of 23)
8 of 8 protocol handler registered successfully
Connection registration failed for connection BC_http://sap.com/xi/XI/System on node 106310950 due to: Failed to register connection BC_http://sap.com/xi/XI/System. Reason: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Failed to load messages into Queue BC_http://sap.com/xi/XI/SystemRecv from database. Reason: com.sap.engine.services.dbpool.exceptions.BaseSQLException: ResourceException occurred in method ConnectionFactoryImpl.getConnection(): javax.resource.ResourceException: (Failed in component: dbpool, BC-JAS-TRH) Cannot create connection.
Possible reasons:
1)Maximum allowed connections to DB or EIS is reached. You can apply CSN Note 719778 in order to check and resolve connection leaks.
2) Configuration to DB/EIS is wrong or DB/EIS is temporary unreachable
3) Connections are not enough for current load.
I tried many ways to resolve this problem unfirtunately i couldn't.Whether this gives any issues i mean shall i ignore this if not please suggest me to resolve this.
Thanks in advance
Regards
Kumar

Dear Team,
I am facing the same issue in SLD(PI Java Stack).
Please find below snapshot. Please Help. Many Thanks .....

In RWB----component monitoring --adapter engine-- status

Hi ,
In the Runtime work bench component monitoring if we click on adapter engine we get two tabls
CCMS Status: Last Retry Jan 26, 2011 1:55:15 PM CET Ping and Self-Test Help
Ping Status: HTTP request failed. Error code: "404". Error message: "Not Found [http://lYYYY:ZZZZ/AdapterFramework/rtc]" Last Retry Jan 26, 2011 2:03:05 PM CET ... Details
Self-Test Status: HTTP request failed. Error code: "404". Error message: "Not Found [http://lYYYY:ZZZZ/AdapterFramework/rtc]" Last Retry Jan 26, 2011 2:03:05 PM CET ... Details

Hi Sandeep,
Besides updating the patch level to the latest and ensure the SP are in the same level, the notes I would recommend would be:
#1285224 - Http 404 error in details display for Adapter Engine
#804124 - HTTP communication with XI Adapter Engine fails (this one you have already mentioned)
Hope it helps too
Regards,
Caio

Delete records in status holding on Adapter Engine

Hi all
We are running on XI 3.0 and Netweaver 04 with SP20 installed
I had a problem with a lot of message in status holding on Adapter Engine (develoment system)
I'm not able to restart (resend) or delete this message. I had look around on SDN and in SAP notes, and only found a lot of old stuff, but nothing there can solve my problem
This are a snapshoot of the error log
Success Processing child message of multi-message with message ID 3aa40608-c251-4845-209c-d327ba444b7c
Success Using connection JMS_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
Success Message successfully put into the queue.
Success The message was successfully retrieved from the receive queue.
Success The message status set to HOLD.
Success Admin action: Trying to redeliver message.
Success The message status set to TBDL.
Success The message was successfully retrieved from the receive queue.
Success The message status set to HOLD.
Success The message status set to TBDL.
Success The message was successfully retrieved from the receive queue.
Success The message status set to HOLD.
Success Admin action: Trying to fail message.
Error Admin action: Setting the message status to 'failed' failed, due to: java.lang.Exception: Predecessor not in final state.. Success Admin action: Trying to redeliver message.
Success The message status set to TBDL.
Success The message was successfully retrieved from the receive queue.
Success The message status set to HOLDError Admin action: Setting the message status to 'failed' failed, due to: java.lang.Exception: Predecessor not in final state..
Success Admin action: Trying to redeliver message.
Success The message status set to TBDL.
Success The message was successfully retrieved from the receive queue.
Success The message status set to HOLD
Kind regards
Kim

Hi,
Change the combination in message monitoring, this time chose Ingegration Engine & Database combination and if you have messages in holding then try to cancel them but first find and delete the system error messages if any.
If you get success here then change back the combination to Adapter Engine & Databse and then try to delete it again.
I am sure that it is possible coz same problem was there with me and then after doing some R&D I was able to delete them.
Regards,
Sarvesh

In my Component monitoring i got this error for Adapter engine status.

In my Component monitoring i got this error for Adapter engine status. Status is in red..
Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.03.server3, string], target element type: SAP_BusinessSystem)
Please clarify ASAP..
Thanks..

HI,
See below links you will get ..
Process Integration (PI) & SOA Middleware
ERR:Could not find SLD name for XI Application "DIRECTORY"
Unable to find an associated SLD element
Regards
Chilla..

Adapter Engine self-test status red / Error

Hi.
Im having trouble figuring out what to do about this error.
In Runtime Workbench --> Component Monitoring --> Integration Server --> Adapter Engine, the Adapter Engine self-test (and ping status) are in error.
The error message is: HTTP Request failed. Error code: "403". Error Message: "Forbidden [http://<server>:<port>/AdapterFramework/rtc]".
Anyone have an idea?
Regards...
Peter

Hi again.
Looking in the default trace I get this Info:
Hope it contribute to a solution.
Regards...
Peter
ACCESS.ERROR:
Authorization check for caller assignment to J2EE security role [sap.com/com.sap.aii.af.app*AdapterFramework : xi_af_rtc].
Exception when reading settings:
Thrown:
MESSAGE ID: com.sap.aii.rwb.exceptions.rb_CommunicationException.HttpReqFailed
com.sap.aii.rwb.exceptions.RequestFailedException: HTTP request failed. Error code: "403". Error message: "Forbidden [http://<server>:<port>/AdapterFramework/rtc]"
at com.sap.aii.rwb.exceptions.RequestFailedException.forHttpErrorCode(RequestFailedException.java:79)
at com.sap.aii.rwb.rtcheck.rtcclient.GrmgConnector.request(GrmgConnector.java:238)
at com.sap.aii.rwb.rtcheck.rtcclient.GrmgConnector.getSettings(GrmgConnector.java:105)
at com.sap.aii.rwb.core.XIRTCComponent.refreshConfigParameters(XIRTCComponent.java:279)
at com.sap.aii.rwb.web.componentmonitoring.model.CmMainModel.getConfigParameterCategoriesForSelectedXIComponent(CmMainModel.java:424)
at jsp_component_monitoring1209546798419._jspService(jsp_component_monitoring1209546798419.java:579)
at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:566)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:190)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:68)
at com.sapportals.htmlb.page.PageProcessorServlet.doPost(PageProcessorServlet.java:22)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmPageProcessor.doPost(CmPageProcessor.java:35)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
at jsp_FC_Secure1209546795341._jspService(jsp_FC_Secure1209546795341.java:15)
at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:566)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:190)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
User XIRWBUSER, IP address
HTTP request processing failed. HTTP error [403] will be returned. The error is [You are not authorized to view the requested resource.No details available].

Status "HOLDING" in RWB----- MessageMonitoring------ Adapter Engine?

Hi Experts,
I am working on a IDOC to file Scenario.
Sometimes the scenario works perfectly and the files are generated successfull
Somtimes the status of the messages are "HOLDING" in RWB--->MessageMonitoring---->Adapter Engine(Messages from the component)?
Why is this inconsistency ? What may be the reason.?
Thanks in Advance,
Anil

HI,
Holding state says that your QOS is EOIO.
If any message is not processed successful,
then next all message is all holding state.
Go throgh this link how to handle these messages
How to deal with stuck EOIO messages in the XI 3.0 Adapter Framework
Regards
Sridhar Goli

Status Adapter Engine

Similar Messages

Maybe you are looking for