Status and Tracking: Lock Function overide due to status change?

Hello experts,
Does anybody know whether it is standard functionality that a user with only R_STS_PT authorisation can unlock his/her planning by changing the status to "in process"?
Should it not be the case that I higher hierarchy node or someone with R_STS_SUP authorisation must first unlock the plannig before for somone with only R_STS_PT authorasation can perform any status change? I am currently unsure whether what we are observing is a feature or a bug which we had previously not noticed.
Thanks in advance,
Will

Hi William,
Persons responsible for executing the planning process i.e. the User (Auth: R_STS_PT) are assigned to an area of responsibility (hierarchy node) within a subplan. They are either assigned to their own area of responsibility directly or are assigned as a substitute. The person responsible uses the STS, firstly to jump to his or her planning application, secondly to set the status of his or her own planning, and thirdly to monitor and set the status of any people who may be assigned under them.
For example, the person responsible for node 11 of the subplan u201Ccost center planningu201C logs on to planning session 1 in the STS. In this way he or she can obtain the detailed view for his or her cost center.
Auth: R_STS_SUP is for Planning Coordinators for monitoring the entire planning process and thus have special access rights. So R_STS_PT & R_STS_SUP are the same, except that you are only allowed to set certain statuses of a task on the basis of the hierarchy levelto which you are assigned (this means, whether you are executing (R_STS_PT) or supervising a particular planning task (R_STS_SUP))
Manoj

Similar Messages

HT1192 caps lock function does not work after latest update

Hi there,
I have a Macbook 13" Early 2011 and recently after updating my operating system to Mac OS X 10.7.4, i have found that the caps lock button isn't functioning.
At present if i hold or press the button, it is failing to light up or function at all.
Is there a fix for this issue, as i have read that there was an update by Apple to stop accidental pressing of this key, however not being able to access its function at all seems to be unusual.
Your thoughts and opinions would be much appreciated,
Thanks,
Robsterhill101

My Macbook Pro Early 2011 15" (base model) did this to me last night.
I did a PRAM Reset, the generic "Cure All Procedure" for Macs. It worked after, but I noticed that the button had to be pressed at just the right angle and with enough pressure. The light would come on and off and Caps Lock functions properly. Continued as normal.
I put the computer to sleep by simply closing the lid, and then put myself to sleep as well.
This morning, just before I came on here, my computer would NOT wake from sleep (a whole other issue). Would not wake up by pressing the power button. So I had to do a hard reset, hold the power button down, and press it again after...grrr I never feel good being forced to do this.
Anyways long story a little bit shorter, I restarted my computer and low-and-behold the Cap Lock is not working again. No Bueno, Cupertino.
No, sorry, no liquid damage on the keys, and I don't have kids, nor share my computer with anyone but myself.
Its one of the few things that bug me about this computer. The other is the issue of the computer not being able to wake from sleep. Too often.
SHOULDA BOUGHT THE APPLE CARE
Simply Because, perfect timing after the years original warranty, you will experience problems. After all, they do want you to be a repeat customer. IYKWIM

Xfce4: Problems with Sound and Screen Locking on ASUS G53S

Hello everyone,
I recently installed Arch for the first time, and decided to use xfce4 for my desktop environment. Everything seems to work well after I followed the instructions given in the wiki, except for the sound and screen-locking functionality. Regarding the sound, I made sure that my user account is added to the audio group, and installed the gstreamer1.0-base-plugins and gstreamer1.0-good-plugins packages. The xfce4-mixer applet starts up without any warnings and recognizes the available devices, but I am still not able to hear any sound. The "Lock Screen" applet simply does nothing upon being clicked. Do you have any ideas as to what I should try in order to fix these problems?
Thank you very much!

To be able to lock the screen you have to install and configure a screen locker or screen saver, e.g. xscreensaver, slock, i3lock, maybe combined with xautolock. When you use a screen locker and not xscreensaver, XFCE might not recognize it. Then create a symlink in /usr/local/bin/xflock4 or use a shellscript if you need to pass parameters.
My configuration: xautolock with i3lock. /usr/local/bin/xflock4 is this executable shellscript:
#!/bin/sh
xautolock -locknow
xautolock is started in the XFCE autostart with this commandline: xautolock -locker 'i3lock -d -i ~/Bilder/arch/arch-linux-lock.png'
PS: If you like i3lock and need user switching capabilities, I can give you a patch where Ctrl-S calls a custom command (gdmflexiserver by default)
Last edited by progandy (2012-06-17 14:19:12)

TS4006 what is the function 'lock and track used for ? What is 'remote wipe' used for ?

I just fired up my iPhone and iPad with 'Find My iPhone app.....not sure how to use 'Function and Track & Remote Wipe' options
Thanks
S

Lock - many users foolishly do not use a passcode, to lock the device. This function lets a user lock the lost device with a password to prevent a thief from gaining access to the apps and data.
Track - when lost or stolen, the device can be tracked on a map. This assumes the device is connected to the internet, is turned on, and has not been reset.
Wipe - this deletes all data of the lost device to prevent a their from viewing the data. Once a remote wipe is placed, you cannot remotely unwipe it, same for lock.

Status and Tracking system (STS) with BI Integrated Planning ?

Hi, is posible get some images or demo for show my clients ?
i am reading Salp Help
http://help.sap.com/saphelp_nw04s/helpdata/en/b6/92bc7479fb11d5b3df0050dadfb23f/frameset.htm
and say :
You can use the BW-BPS Status and Tracking system (STS) with BI Integrated Planning. This is useful if you are already using BW-BPS with the Status and Tracking system but want to use additional functions from BI Integrated Planning.
What is additional functions from BI Integrated Planning ?
Is posible write free text in some areas for planning and option for look from high levels ?
Is posible Insert in the proces STS to <b>"Area Manager"</b> only for look status the Planning (open, in process or finishing) ?
General manager --> Lock when is finishing.
<b>Area manager</b>--> only look status the Planning ?
Submanager of area --> Responsable, Aproval, etc.
planning1
planning2
planning3
planning4
planning5
Submanager of area : Planning TOO.
Thank you ... This is important info and get some images the last version in STS working in web mode, for my client buy the product.

Hi Bala ,
Yes you can use the STS for BI IP also and you need to configure the Planning level and sub plan area and follow the steps to set up STS.
STS still has BPS flavour and can be used in IP.
Hope this helps
Raja

Present Status button is unusable in Status and Tracking System

Hi everybody:
In Status and Tracking System the Present Status is unusable. It involved set for processing ,send for approval and retrieve . They are all unusable. They are not locked, but are gray !
why ??
thanks!

What sort of user is this for? If a Super user, press the Edit button first.
If another user, or this action does not enable the buttons, probably another user is blocking. Click on the 'status' link to check.
Sephen

Status and Tracking customizing + BI Integrated Planning

Hi,
I am trying to set up a Status and Tracking (STS) solution for our Integrated planning application. I understand this might be somewhat cumbersome, as STS is created for BPS - but still SAP has said it should work for BI-IP aswell.
I see I have to make use of Planning Areas. Even though we are using BI-IP, I quickly created a plan.area i BPS0 based on one of our real-time cubes. My problem appears in the 3rd "step" of the STS customizing where I am to "Determine a hierarchy for Subplan".
I get the error: "Error when reading the hierarchy" after filling out the fields... Any ideas?? Does it have to be a BPS-type hierarchy. There is nothing wrong with our hierarchy (as we use it for planning and reporting etc), so I cannot understand the error.
Any ideas?
Thanks,
Jon Anders
PS. Feel free to share any other issues or thoughts about using STS with BI-IP.

Hi,
we're using a multi-characteristic hierarchy for STS for our cost center planning. Our STS hierarchy has then one root text node, a misc business unit node below (that's your single characteristic node), a range of profit centers under that and finally the cost centers.
Actual Planning is only done on the cost centers, but since we derive the profit center from the cost center, a profit center leader can lock planning for all subordinate cost centers by locking his profit center if the cc/pc association written to the cube matches the STS hierarchy.
In the case of your profit center hierarchy, you'd probably have the root text node, then some bogus profit center you don't do any planning on, and underneath all remaining profit centers. Instead of the first profit center you could probably also use the controlling area as a characteristic (how many do you have?)
Bear in mind that any characteristic you have in the hierarchy needs to appear in the planning area and hence in the infocube.
Does this help? Regards,
Tilman

Updating caps lock and num lock status

I need to keep track of the status of the caps lock and num lock keys in a status bar of my frame.
I get the current status with a code like this
Toolkit toolkit = Toolkit.getDefaultToolkit();
numLockState = toolkit.getLockingKeyState(KeyEvent.VK_NUM_LOCK);
capsLockState = toolkit.getLockingKeyState(KeyEvent.VK_CAPS_LOCK);
fireChangeEvent();
where fireChangeEvent() updates a label in the status bar. The code is invoked when any of the caps lock and num lock keys are pressed (while the window has the focus) and when the window is activated. This code works while the window has the focus (i.e. the status of the keys if correctly tracked). It does not work correctly when the window is activated.
Specifically the following scenario fails:
- The window has focus and the state of the keys if correctly reported by the code above (say caps lock up, num lock
up);
- The window loses focus, i.e., another (non java) window gains the focus;
- The user presses any of the two keys (say the caps lock key);
- The window regains focus.
When the latter event happens the code above is invoked (as a consequence of the window being activated) but it continues to report the status of the keys at the time the focus was lost by the window (caps lock up, num lock up).
It seems that the toolkit does not automatically updates its internal status if a key is pressed when the java window does not have the focus. If I press the caps lock key (so that it returns to the up state) after the window has regained focus the status is updated and the new state is correctly reported. I need to manually realign the status by pressing the keys to have them correctly reported by the toolkit.
Some ideas on how to have correct key status even after the window looses the focus?
Thanks.

Specifically the following scenario fails:
- The window has focus and the state of the keys if correctly reported by the code above (say caps lock up, num lock
up);
- The window loses focus, i.e., another (non java) window gains the focus;
- The user presses any of the two keys (say the caps lock key);
- The window regains focus.
When the latter event happens the code above is invoked (as a consequence of the window being activated) but it continues to report the status of the keys at the time the focus was lost by the window (caps lock up, num lock up).sorry! i tried this in a JFrame windowActivated() and i got the desired result it breaks your senario.
the only is though it is not sensing the keyStrokes but if window looses focus because of another window gains focus it changes the values when it get focus next by ne means.
Provide a short executable code might be the problem lies there.

Does iOS have the ability to automatically show me shipping and tracking info or flight status based on information in my email?

I am considering switching from an android to an iPhone and one of the features I use heavily on my android is my google now cards. It automatically reminds me to check in for flights and gives me flight status information based on flight information in my email. It then shows me a card for the weather where I am and where I'm going. I also use it for shipment tracking; if i have an email that has a shipping confirmation number, I have a google card that automatically shows me the tacking number and tracking status. I was wondering if Apple had something similar and if it was through Siri or something else? I have an iPad and I haven't seen features like these on it. Everything I've read about Siri so far is that the information given is based on you prompting with a question as opposed to proactively giving me information I need, which is more how I use my android today. If the answer is to us the google now app for iOS, does will it interface with my email and calendar to make relevant cards seamlessly on the iPhone like it currently does on my android phone? Thanks in advance for the help/advice!

I am considering switching from an android to an iPhone and one of the features I use heavily on my android is my google now cards. It automatically reminds me to check in for flights and gives me flight status information based on flight information in my email. It then shows me a card for the weather where I am and where I'm going. I also use it for shipment tracking; if i have an email that has a shipping confirmation number, I have a google card that automatically shows me the tacking number and tracking status. I was wondering if Apple had something similar and if it was through Siri or something else? I have an iPad and I haven't seen features like these on it. Everything I've read about Siri so far is that the information given is based on you prompting with a question as opposed to proactively giving me information I need, which is more how I use my android today. If the answer is to us the google now app for iOS, does will it interface with my email and calendar to make relevant cards seamlessly on the iPhone like it currently does on my android phone? Thanks in advance for the help/advice!

HT4085 So does this mean that I cannot have rotation lock off and the mute function off at the same time? In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same

So does this mean that I cannot have rotation lock off and the mute function off at the same time? In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same time?

In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same time?
Yes, you can. You can configure the Side Switch (above the volume button) either as Mute switch or Rotation lock.
Settings > General > Use Side Switch to: choose what you like the Side Switch to function as.

I recently did the update and my text message notification was no longer working. Then I did a reset and now my locking function no longer works. What is going on???

I recently did the update and my text message notification was no longer working. Then I did a reset and now my locking function no longer works. What is going on???

What "locking function" are you talking about?

Hi, i installed ios 5 for my iphone 4 and the camera function on lock screen was on the first few days , now it doesn't show the lock screen . is there any change i can do . Pls help me to solve the issue.

hi, i installed ios 5 for my iphone 4 and the camera function on lock screen was on the first few days , now it doesn't show the lock screen . is there any change i can do . Pls help me to solve the issue.

nishaadp wrote:
... it stucks with the apple logo , nothing works. Is anything i can do?
See Here for
Frozen or unresponsive iPhone

After updating my Macbook Pro retina display to os x yosemite 10.10.2, the mause and track pad locks, and do not respond especially when using the Mac for a long period, please help, how can I solve this, I do not like feel like in windows, so I paid

after updating my Macbook Pro retina display to os x yosemite 10.10.2, the mause and track pad locks, and do not respond especially when using the Mac for a long period, please help, how can I solve this, I do not like feel like in windows, so I paid good money for this mack, I feel calm

Hi Buterem,
I'm sorry to hear you are having issues with your MacBook Pro since your recent Yosemite update. I also apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having intermittent but persistent responsiveness issues with your mouse or trackpad, you may want to try using Activity Monitor to see if these incidents correspond to occupied system resources, especially system memory or CPU. You may find the following article helpful:
How to use Activity Monitor - Apple Support
If the entire system hangs or locks up (for example, if the system clock freezes and stops counting up), you may also be experiencing some variety of Kernel Panic. If that is the case, you may also find this article useful:
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
Regards,
- Brenden

Changing Look and Feel - BPS status and tracking system

HI,
I 'd like to know if there is a way to customize the web page that appears when you launch the transaction BPS_STS_START (Starts BPS Status and Tracking System). I believe that it's an automatically generated page, that takes from somewhere an html template. Is there a way to change that html template?
For example, how could I insert a logo, insert titles, change fonts, etc.
I 'll appreciate if somebody send me some related documentation.
Thanks in advance.
Cristian.

Hi Christian,
the STS is a BSP-Application(have a look at TA SE80).
You can copy this BSP to your own customer-namespace(YTUNGUSKA) and you can change all pages and views you would like. You can integrate other stylesheets, logos or you can modify the logic of events triggered by buttons and so on. Please note: If you copy the TUNGUSKA you cannot use anymore the TA BPS_STS_START cause it only will start the BSP TUNKUSKA(its hardcoded), build up your own transaction.
Hope it helps
Bye Gil

Session Out Error in Status and Tracking System (BPS) Execution

Hi,
I am getting the Session timed out error in Status and Tracking System (Open Planning). The reason I found is:
In STS (Configuratioin) the web link that I have added is valid for one time. Meaning that ever time I visit Web Interface Builder (Execution), it is generating a different web link. Therefore, it is only valid for a single time.
Is there any way, that I can make the web string that is generated every time I visit Web Interface Builder (Execution) for a particular report, so that I can use that web link in the configuration of STS (Open Planning). In this case the web link every time that generated is dynamic.
But, this is not the case with Open Report. I prepared a query and attached the web link of the query into (Open Report). The number of times even if I open the report, there is no issue as the web link is static.
Any inputs on this will be appreciated.
Regards,
Ravi

Hi,
This has been solved.
In STS Configuration the web link (URL) that is to be inserted is not the web link that has dynamically generated. However, it is the web link (URL) on the Web Interface Builder (WIB) - Property - URL BSP Application.
If you use this URL in the STS (Open Report), this will ask the User for User ID and Password to reach that Web Planning Layout and a dynamic code will then be generated. Every time, user visits it generates new dynamic URL.
Anyway, Thanks in advance.
Regards,
Ravi

Status and Tracking: Lock Function overide due to status change?

Similar Messages

Maybe you are looking for