Status application in Red

Hello,
I installed OAS 4.0.8.2, I have created an application with the cartridge, and I have created a stocked procedure. when I want launching, I always have the statute of the application in red. I don't arrive to put it in green. can you help myself and thank you for advance.

Hi,
Yes, the issue was solved and I can monitor all components in the WLS 10.3.
To achieve that, I did the following adjustements:
1. Open the command line and check if the WLS environment is set correctly. In “C:\Oracle\Middleware\wlserver_10.3\server\bin”, execute “setWLSenv.cmd”.
2. Check JDK versión. In the same path, execute “java – version”. Verify JDK is greater than 1.6.0_05.
3. Create an Oracle WebLogic Server Domain for Oracle ADF.
I hope it helps.

Similar Messages

  • Process completed successfully but status changes  to red

    hi in my process chain all the processes of the master data load local chain completed succesfully but the status changes to red and the chain is not processding further.  wh t may be the reason for this.
    do any one have idea about this

    Hi,
    RED means the whole status of the chain or any particualr step in the process chain..?
    If the total status is RED even all the steps finished successfully once come out of the session and again refresh and chk status...
    Now if any step in the chain fails the total chain status remains RED only...
    If u still needs to process further then u can use FM: RSPC_PROCESS_FINISH in SE37
    U hav to copy the detals from the table RSPCPROCESSLOG.........
    Check this blog:
    /people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
    rgds,

  • IPS status LED stays red

    Dear Friends,
    There is a IPS 4260 that reports the status LED to red. When reading the hardware installation guide, i came to know that this indicates a POST failure. I forced a POST again of the IPS by rebooting the IPS but i could not capture any significant error.
    However, i am enclosing the captures of the boot process (Filename: IPS) and the sh tech-support (Filename: IPS Tech support).
    Can you please help me on this?
    Thanks a lot
    Regards
    Gautam

    Shutdonw the IPS for 5 - 10 Minutes and the Restart i did and the issue has been resolved .
    Thanks,
    Mustafa 

  • DSO reporting icon was displayed although load status was "Yellow"/"Red"

    Hi,
    Whilst loading a DSO, I observed that the reporting icon was displayed even when the load was in status "Yellow" and in one instance, the reporting icon displayed even when the status of the load to the DSO was "Red" i.e it had failed. I would reckon that the DSO reporting icon would be displayed only after the load was successful including the activation step. Why then was the reporting icon displaying when the load was not successful.? Is this an SAP bug.
    Any thoughts, gurus!
    Thanks
    Kevin

    Hi,
    I don't understand this. In a Standard DSO if the Quality Status is set to Automatic then the report shows as Green in the Quality Status Icon. However, data is still in the "New Data Table" and is not yet updated in the Active data table/change log unless the activation is done. If the Activation is done, only the will the data be available in the Active Data table/Change log.
    It is only afther this data is available that the reporting icon is displayed.
    If the Qualilty status is Yellow/Red the activation cannot be done. In whcih case there is no question of data being available in Active Table/Change log and hence the reporting icon should not be displayed.
    Therefore, I am not able to understand the anomalous behavior of the display of the reporting icon even when the Qualtiy Status is Yellow/Green
    @Experts: Is there something that I am missing
    Thanks
    Kevin

  • I cannot import my AVCHD files by using log and transfer. I can see all the files, but when I add the file to import que it doesnt work, the status is a red (!) and says that its no data. I have tried with different cards and different cardreaders, but it

    I cannot import my AVCHD files by using log and transfer. I can see all the files, but when I add the file to import que it doesnt work, the status is a red and says that its no data. I have tried with different cards and different cardreaders, but it is still the same. Why?!

    Please give us more specific information -
    What make/model camcorder are you using?
    Are you absolutely certain this is AVCHD video?  Tell us more about the video settings you used in the camcorder (eg, frame size, frame rate, quality level)
    Why are you attempting Log & Transfer from a card reader instead of from your camcorder?  Have you tried doing Log & Transfer from your camcorder?
    Are the SD cards straight from the camcorder, unaltered, or are you just using the cards as storage?
    Are you using FCE 4.0 or FCE 4.0.1?

  • Cisco Configuration Professional - Monitor - Traffic Status - Application traffic view

    Installed the Latest version of CCP. Noticed that it use Internet Explorer as the default browser.
    Current issue - Monitor - Traffic Status - Application traffic view show a window that is to large for my current screen,
    I've tried several options to make it more viewable, but no luck.
    Screenshot, Explaining the issue - Notice the difficulty to view the graphs
    Any advice will be appreciated.
    Philip

    I've manage to fix it by changing the zoom on Internet Explorer

  • Sup V with 4507R status led in Red

    Hi,
    I carried out an upgrade in 4507R with 2 sup V, I loaded in both card 12.2(53)SG10 and I confirmed the redundancy is working
    I don't understand why both status led (for Sup V) are in red.
    the loggs do not show error ,  any idea how can I identify the reason of red color in status led?
    regards
    Mod  Redundancy role     Operating mode      Redundancy status
    ----+-------------------+-------------------+----------------------------------
    1   Standby Supervisor  SSO                 Standby hot
    2   Active Supervisor   SSO                 Active
    redundancy
    mode sso
    main-cpu
      auto-sync standard

    Hello,
    The status LED can actually lend useful information regarding the potential culprits to your issue. You can check out the STATUS LED Error Indications in the 1601 User Manual.
    In this case, it looks like you should contact National Instruments directly since it seems as though the module did not power on correctly. You may have to return your unit for replacement or repair.
    Cheers,
    Emilie K. | Applications Engineer | National Instruments

  • FP 1601 status led shows red continuously

    I am trying to use FP 1601 which was already configured long before. But now the status LED is continuously red .Power LEd is green and all other LEds are off. Am giving 24V power and checked that it is given to V and C properly .Ethernet connection is also proper. i tried to reset , but could not. i cant use it in anymore. can anyone help in troubleshooting

    Hello,
    The status LED can actually lend useful information regarding the potential culprits to your issue. You can check out the STATUS LED Error Indications in the 1601 User Manual.
    In this case, it looks like you should contact National Instruments directly since it seems as though the module did not power on correctly. You may have to return your unit for replacement or repair.
    Cheers,
    Emilie K. | Applications Engineer | National Instruments

  • Add Button to GUI STATUS Application toolbar

    Hi,
    I have to add a button in the application toolbar of a gui status. I have done that many times before, but I never got into trouble like this time....
    When I open the Gui status and the tree for the application toolbar, I can see already set buttons. When I now click on change (a modification warning comes) and press the plus-icon, it is possible to enter a new item. But everything I´m typing, I get the message Function code XXXX has not been assigned to a function key. I have never got this before....
    When I now go to SE41 and enter a new function key, I can´t use it either afterwards as a button in the application toolbar.
    In the tree of the function keys, I can´t change anything...
    What can I do here? The program name is SAPMZLCG, so it has been modified sometimes. But how can I change the GUI STATUS now to add a new button?
    Thank you!

    You need to goto the application toolbar and the add your text to the items and click below the text you will get one popup which will ask for static text and dynamic text. select statictext and then add all the information like text name and if you want to add an icon you can do it aswell. the there will be another popup for fuction attributes where you will be able to find some options loke fuction types and reaction need to select all that and then click on the ok button and save check and activate the same and after that activate and check whether the button is visible or not. once the button is visible then you need to check for the ok_code and sy_ucomm and then insert the fuctionality of the button.
    I hope this might solve your problem.

  • Status bar turned red

    While I was using my iPad, the status bar at the top (the black bar all the way at the top with the clock) suddenly turned red for a very brief moment.  Out of the corner of my eye, I saw some words there.  But when I shifted my focus to read what was there, the words disappeared and the bar turned back to it's normal black.  So I have no idea what this was all about; it was so quick.  But it was obviously a warning of some sort.
    Anybody know what this could have been?

    I found it.  It says "Garage Band Recording.". Strange, considering it pops up after quitting the app.

  • Blackberry Pearl 8100 randomly shuts off and the status LED flashes red

    My pearl was reciently unlocked and changed from AT&T service to t-mobile. after this switch the pearl started having fits of rage where it will turn off randomly, weather any keys have been hit or even if it is idle. the device LED then flashes red, sometimes once, other times it will flash once every 4 seconds for hours. then it will randomly turn back on either to the exact screen it had been on before it powered off or it will reboot completley and start the normal start-up procedure and varify security checks just as if the battery were removed. i tried removing the batery and leaving the phone disassymbled for a few nights but in the morning the plague is back and unrelenting. sometimes all i have to do it pick the device up and it will shut off. other times i will be plugging away with it for 20 or so minutes on the internet and then it will die suddenly. it also cuts out in the middle of phone calls. if anyone can help,please let me know.
    blackberry 8100 v4.2.1.96

    Is it a new phone? If it's less then a month old see if you can return it, otherwise you can try reloading the OS.
    So if you're willing to try that, do the following.
    First download and install the Desktop Manager from here (4.6 without Media Manager is recommended): https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
    Next you can use the Backup and Restore feature present in the software to make a backup of all the data on your phone.
    Next download and install the handheld software from here: http://na.blackberry.com/eng/support/downloads/download_sites.jsp
    Afterwards try reloading the OS by connecting the device to your computer, open the Desktop Manager, then go into the Application Loader. This will open a wizard that steps you through reloading the OS onto your device. More detailed steps can be found here:
    http://www.blackberry.com/btsc/KB03485
    If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
    Remember to resolve your thread by clicking Accepted Solution.

  • Technical Status is in yellow but total status is in Red

    Folks,
    My Init load failed due to RFC errors, in the monitor Total is showing Red Status but the Technical is still showing yellow status and I am unable to delete the failed PSA request to re-start my Init load, please let me know how to resolve this issue.
    Thanks,
    Kumar

    Hi ,
    did you cancel the job in source system .. first cancel that job  and the delete that request ..
    request might take long to delete due the more no of records ..
    check the deletion job in source system wether its progressing or not .. In general you can follow this if you face this kind of issue further ..
    regards,
    shikha

  • IDoc: Status: Application document not posted

    Hi Friends,
           I am New to ALE/IDOC.  Based on the ALE_QUICKSTART  documentation. I have tried to send  material from one client to other client. (within system) To do that
    I have created two logical systems and assigned them to corresponding clients.
    Created a RFC destination and assigned logical systems.
    Created Distribution model in sending client.
    Created partner profile in both clients.
    Created Material and send to receiving system using BD10 tcode.
    I checked Idoc status in Sending system, Idoc status is 03-Data is passed to port OK, status 30-Idoc ready for dispatch and  status 01- Idoc generated.
    But in receving system  (Inbound Idoc)- I got status- 51-Application document not posted and Function module not allowed: AFS_RETAIL_ARTMAS_IDOC_INPUT.
    I also checked partner profiles in both systmes- both r same.
    Kindly tell me what went wrong and what should i do.
    Pl.provide answers pertain to this problem only.
    Thanks in advance,
    S.Senthil

    Hi Chris,
            Thanks for ur reply.  I am not using is-retail and I have Generated MATMAS idoc in sending system.
          Kindly provide me answer.
    Thanks in advance,
    s.senthil kumar

  • Request showing still running in Monitor after request status is made red

    Hi All,
    We have a delta load running from an ODS1 to 3 Targets - Cube1, ODS3 and ODS4 through a single delta infopackage. For handling a production data failure, we had to delete the data from these 3 Targets along with the inits. Afterwards we again started the init with data transfer for all the 3 targets simultaneously. The load failed due to processing overdue. Again the inits were deleted for all the requests but during the next day loading we suddenly found the same requests in the 3 Targets with yellow status showing as running. These requests were already changed to red in QM status and the inits were deleted. But can anybody explain how come they again reappeared ?
    This question is really intriguing.
    Thanks
    Somnath.

    Hello somnath,
    those request are submitted to batch, and they are still alive somehow even if you delete those requests or change them to red.  And again tries to load data to providers and if no request available creates new ones.
    What can you do?
    1. Try to delete those jobs from the queue.(It's not possible for every request unforntunately)
    2. Delete the content of provider by using right click on the provider and choose delete data.
    Sarhan.

  • Request status is in Red, where as message is "Request still running"

    Hi,
    In my production system, one data load showing red as status,while in status tab tab it is giving message that request is still running.
    Please give me your valuable suggestions, why it is showing linke that and my next steps in this case.
    Thanks in advance.
    Thanks And Regards,
    Narayana K.

    Hi,
    It might have occure because of Time out.Your Bw system is still searching for the request while the request already got loaded virtually.
    Just try to do a repeat if possible.
    Hope this helps
    Assign points if useful
    Regards,
    venkat

Maybe you are looking for