Status at the time of creating the portfolio assets and Inactvo

Hi need you please inform me the functionality that is active or inactive status by creating a portfolio because the portfolio to create inactive allows modifications.
You must perform some coniguracòn to allow the portfolio to create inactive status does not allow any modifications to change the statue to active
Thanks
Ann

Hello
Thanks for the response, per still do not understand which is the ability to handle the active and inactive status when creating a portfolio portaflio.Al create the inactive status but does not change the status can create new buckets and Items. Taking rather inactive status should not appraise modifying or creating buckets and items. Since the test was performed with a restrained but equally User defined allows the porafolio modficar.
Greetings and Thanks

Similar Messages

I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work. Help?

I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work.
^^ that's the main problem. Here's the full history.
I bought a new 13" i5 MBP, early 2011 edition. I had an old white Macbook 2.14 ghz core2duo on Snow Leopard. I attempted to port over my time machine backup, but encountered problems in that my User was inaccessible from the new computer after the import finished, and I had to go in and change the root password, etc, and for some reason or another, I couldn't install any programs at all from that administrator's account. By "couldn't" I mean I could install them, but upon installation they would never boot. So, I took it to the apple store and did a clean install from the most up to date Lion OSX. Then, I created a brand new admin account, instead of trying to import the old one, and things seemed great. Then, I just imported my old files from the TM backup, but not any system settings, permissions, or user data. Just my Docs, pics, vids, apps, and itunes stuff.
Here's where things get weird again. I imported this stuff under the name "old", but all of these folders have a red negative sign on them, marking them as restricted. So, from my main admin account, I cannot even peruse these folders. Since I didn't import user data, I can't sign in to the "old" account to change permissions. I already tried to change the permissions from system preferences, but that didn't change anything. And now, for whatever reason, of all the apps that were imported then, MS Office is the only set of apps that does not work. When I click on it, it just says there was a problem and asks if I'd like to send a report to apple. I tried reinstalling it to no avail. I'm an English student, so i really need access to Word. Can anyone help? The Apple store is a major detour for me and would like to fix this issue myself.

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

Hi Im using os 10.7.5 and i can't see the progress status in the launch pad and in purchase tab in mac app store. PLEASSSSSEEEE HELP!

Hi Im using os 10.7.5 and i can't see the progress status in the launch pad and in purchase tab in mac app store. PLEASSSSSEEEE HELP!

HI guys! can anyone help me with this?!?

BAPI/FM for setting the user status for the Project definition and WBS elem

Hi,
I have to set the User Status for the Project Definition and the WBS elements in that project.
The User status to be set is the same for the project and wbs elements.
Please let me know if there is any BAPI/FM to set the user status..
Thanks in advance.
Regards
Shiva

Hi Shkithija,
There is a dump encoutered in the form "PS_FLAG_GET_GLOBAL_FLAGS" for 'chk_precommit_ok' in the "BAPI_PS_PRECOMMIT".
But it is showing SY-SUBRC = 0 when used along with BAPI_TRANSACTION_COMMIT.
May i know what are input parameters we need to pass it to "BAPI_PS_PRECOMMIT".
Do you have any idea.
Please let me know
Regards
vishnu

How can I change the asset status in the Fixed Assets Addon?

Hi All,
I installed SAP Fixed assets addon in our customer, and I have imported the fixed assets.
There are assets which book values are 0, but the asset status is active.
How can I change this assets status to inactive?
I
My SBO version is SBO 2007A SP1 Patch 05.
Thanks: Veronika

Dear All,
Thanks for your answers. I have managed to solve this problem.
Now I have another problem, but I will create a new message about it.
Thanks: Vera

PO created for fixed asset and other issues

1)Where does asset clearing account or CIP clearing account picks up in while creating a Purchase order for a fixed asset ?Is it from the item itself while defined or any other place ?
2)How does the accounting line flows from Fixed asset to General ledger especially for CIP assets?
3)How can a asset be attached to corporate book and tax book ,what is the set up required ?
Thanks
Jogendra

1)Where does asset clearing account or CIP clearing account picks up in while creating a Purchase order for a fixed asset ?Is it from the item itself while defined or any other place ?
Account gets defaulted from Item if it is there, if not you have to enter manually.But if you have customized your account generator, you have to look at the account generator.
2)How does the accounting line flows from Fixed asset to General ledger especially for CIP assets?
If you are creating a PO for an expense item, and have used CIP Asset Clearing Account in the PO Distributions it gets eligble. When you invoice this PO, this CIP Clearing Account gets Debited.
Cr Liability 100
Dr CIP Clearing Account 100
Obviously as this is setup as an asset account (flexfield qualifiers) this gets eligble for the mass addition transfers once you validate and account the invoice. When you run the mass additions create and post, these accounting entries will get created.
Cr CIP Clearing Account 100
Dr CIP Asset Cost Account 100
These accounts are defined at the asset category. The asset category for the mass additions is taken from the item setup (Purchasing Tab). Ofcourse this can be entirely different in R12.
Asset Book is derived based the asset category. Create Journal Entries program transfers the accounting entries to GL. Assets Creates the entries for the CIP Addition process in FA before transferring them to GL.
3)How can a asset be attached to corporate book and tax book ,what is the set up required ?
First you create a corporate book and then create a tax book and assign corporate book to this. WHile creating the tax book if you check the Allow CIP Asset check box (Tax Rules tab), the asset will automatically get copied into the tax book.
Thanks
Nagamohan

The Project Assets panel is empy when I open my project the next time

When I Add Media the Project Assetts and save the Project, the Asset file is empty when I open the project the next time.

BobHp17
Please excuse if I repeat, but I just want to make that I am not taking anything for granted.
1. Given that I opened Premiere Elements 12 new project, and that the Expert workspace Project Assets is as shown in screenshot 1, unopened. All I did here was to open the program and this was the view.
At this point, Project Assets will remained closed until
a. I click on the triangle next to the words "Project Assets" (then I will have an empty Project Assets since I have not yet imported media. See screenshot 2.
or
b. I import media into the project.
While you are working in the Expert workspace with your media on the Timeline, do you click on the triangle next to the words Project Assets to close Project Assets so that its presence does not obstruct your view of the project while you are editing?
It is normal for you to open this saved/closed project and see the Project Assets panel closed. To open it again, please refer to the above two mentions. I just want to make sure you are distinguishing between an empty Project Assets panel and one that is closed and that needs to be opened to see its contents.
If you have content on the Timeline, then you "must" have a thumbnail for each it in Project Assets. There are 2 views for Project Assets - which one of them are you in...Grid View or List View? See Panel Options/Views/Grid View and List View.
Panel Options icon is to the right of the Pin icon.
Another thought, what are the properties of the media that you have on the Timeline which are not being represented in the save/closed/reopened project's Project Assets?
Let us confirm the details. If confirmed, we may want to go to deleting the settings file.
Local Disc C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
12.0
and in the 12.0 Folder is the Adobe Premiere Elements Prefs file to be deleted. Make sure that you are working with Folder Options Show Hidden Files, Folders, and Drives active so that you can see the complete path.
Thanks.
ATR

AUC from Investment measure can't settle to the completed asset partially.

Dear.
I using IM module and AUC which made from Investment measure.
and I post cost to Investment order and settle to AUC periodically.
Some amount In nvestment order should be tranfer to the completed asset. so remained amount in that should be keep going on.
But, Investment order settlement rule only can be maintained by FULL settlement method.
It means, all amount that accumulated in Investment order must be settled.
What I want to do is the partial amount settle to the completed asset and remains left in investment order.
Of course, this investment order keep its function as collect the amount of AUC.
How can It be?

Hi,
Use KOB5 - Give the settlement rule - mention the required amount and asset code
Use KO88 and settle the asset by selecting Settlement Type - Partial Settlement
Regards,
Muralidhar

Re-using the same asset with 'live link'

I have a project with the same asset (a line of text) that I re-use in 20 groups. It's the same text. I am tired of duplicating the text group for each new group that it's going in. Is there a better way where I can use the same asset and retain a 'link' to the initial asset and then if I change something ( e.g. text treatment) there, it will update all of the 20 groups it's used in? Thanks.

Clones will do what you ask. Clone the text as often as you need, and if you need to change the text, or the color it'll update all the clones.
Andy

Several user status at the same time

Hi Export,
As I found, we can only choose one status from the list in WBS. Is there any config can make it possible to select multi status in one time?
Thanks,
Liang

Hi
yes you can select more then one user status at the same time
For example you create user status like this in OK02
1     INIT     Initiative
2     DRPR     Draft Proposal
3     PLAN     Fully planned & costed
4     AFEA     502-Approved
5     RELE     Released for execution
6     HOLD     On hold
You can select the user status from the above list
If you set the Initial status flag for the user status
If a status is marked as an initial status, it is automatically activated in an object when the object is created
Thanks
S.Murali

I created an iCloud account and also had to get more space after I have done the purchase, I am unable to backup my phone! I have a stable wifi connection at home and all I see for hours and hours is "Backing Up .. Estimating time remaining"!!!!! Plz help

I created an iCloud account and also had to get more space so after I have made the purchase, I am unable to backup my phone! I have a stable wifi connection at home and all I see for hours and hours is "Backing Up .. Estimating time remaining"!!!!! Plz help I'm unable to make the backup as I need to transfer all my data on my new iPhone 5S

This may be caused by a corrupt existing backup that needs to be deleted, or by data on your device that is causing the backup to fail. To troubleshoot these, try deleting your last iCloud backup (if you have one) by turning off iCloud Backup in Settings>iCloud>Storage & Backup, then tap Manage Storage, tap your device under Backups, then tap Delete Backup. Then go back and turn iCloud Backup back on and try backing up again.
If it still won't back up, you may have an app or something in your camera roll that is causing the backup to fail. To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If the backup is successful, then the camera roll and/or one of your apps is causing the backup to fail and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup.
In the meantime you can back up your phone to your computer by connect it, opening iTunes and going to File>Devices>Back Up. Also be sure to transfer your purchases (File>Devices>Transfer Purchases). Then set up your new phone and when given the option, choose Restore from iTunes Backup and follow the prompts to restore this backup to your new phone. This will be much faster than using iCloud anyway.

Time Capsule - Can it run as DHCP router, create a wireless network and plug into switch for wired network all at the same time?

I have a closet with Wired connections from all over the house terminating in it. I also have the internet modem and a switch in this closet. My old setup was a netgear in the closet creating a wireless network and also feeding the Ethernet ports all over the house. In my room, I had an Airport express (a month old) bridging the wifi to make the wifi network larger. The Express was hard wired from the wall and my mac mini was using it's wifi (printer was plugged into other ethernet port). Everything was working great.
Fast forward to last week. My Netgear died. So, I bought a time capsule. My plan was to move the Express to the closet and have it create the wifi network and also then run cat 5 cord from express to the switch to feed all the wired wall plugs. Reset it and set it up to create the wifi network as well as DCHP NAT. Wireless was running great on it. Then I plugged in the Cat 5 in the second Ethernet Port to the switch. Wifi stopped working and none of the computers would connect using wired connections either. They would see a 'network' but nothing would work. I would unplug the Cat 5 feeding the swtich and the wireless would start working again. Plug the Cat 5 back in and wireless would stop.
So I thought I would try the Time Capsule in the closet and see if I could get it to work. Pretty much the same thing, except at this point I figured out if I went in and told it NOT to create a wifi network the wired portion worked fine and all the wired computers in the house worked fine. Of course, then I didn't have Wifi.
I'm not clueless when it comes to networking, but I can NOT figure this out! Can either the Time Capsule or Express Create the wifi network AND also feed the data to the switch for all the wired computers?
To simplify this is what I want my end result to be. I prefer the Time Capsule to be the wireless connection extender, but if I have to have the Express do it, I'm fine with that.
1. Express in the closet creating the wifi network as well as feeding the data to the wired connections via my switch.
2. have the Time capsule in my room at the opposite end of the house plugged into the hard wired connection to extend the wrieless network as well as have wired connections such as my printer and my Mac Mini.
If I can get #1 to work, I don't think I'll have any problems with #2. Help!

I have an equally complex setup with a managed switch actually but I have never seen the TC have this kind of issue.
What I do notice is you have changed the TC from defaults.. you are using a non-default IP range.
I have run across issues like this where people move things from default.
I would like you to start over.. factory reset the TC. That will set it back to default router mode.
Do the min setup on the TC..
1. Change all names from what you were using. That includes the TC name and wireless name/s
Make them short, no spaces and pure alphanumeric because that is the correct way to network. Apple default names with spaces and apostrophes are fundamentally bad.
2. With just the TC plugged into the switch.. and a single computer connected by ethernet. Power cycle the whole network.. this allows the switch to clear all the old MAC address.
3. Test on the computer just ethernet. Turn the wireless off.
The computer must use dhcp and must get an ip from the TC.
It has to get the correct Router.. ie Gateway.. I wish apple could stick with proper network terminology.
And it must get same address or valid DNS server address/es.
If it fails.. please plug ethernet directly to the TC.. bypassing the switch.
You should get the standard IP addressing and internet connection.
If not please post the screenshot from the Mac of the network preferences showing the ethernet setup.
I need to see what address it does get. I need you to make sure the ethernet is the TOP of the list. So rearrange the order of network connection. With the airport off it should just go to the top of the list.
If it appears to be working .. but a browser cannot connect, open a terminal and ping an internet address.
Ping the actual gateway address the ISP gives you and ping the ISP dns address.

I have 2 auxillary disk drives for my MacBokk Pro. Time Machine uses one for backup and I use the other for storage, but I am unable to create a new folder or drag and drop files or folders to the aux drive.

I am unable to create a new folder on either of my auxillary disk drives. I can access the files and folders that were there when I transferred one of the drives from a PC. Time machine uses one for backup and I want to use the other to store photos which are large files. An help would be appreciated.

Thanks for the reply. If I reformat the drive will I be able to access the files on it from the MAC. I do not share the drive with a PC. The files were originally created on a PC which I no longer use. I do want to continue to access the files put there by the PC. I would like to not have to copy them over to the MAC hard drive just to use them. The second aux drive is new and works fine because it was formatted by the MAC. I can drag and drop files there and work with just as if they were on the internal drive.

HT1178 Do I want to create a new wireless network or join my current network? I can't connect an ethernet cable to the Mac / printer and to the wireless modem at same time - in two different rooms.

I am trying to set up Time Capsule so that I can do my first backup (after 1 1/2 years!) with Time Machine. I have read other forums, but in each case they instructions eventually do not apply.
I have connected my TC to my existing wireless router. This sits in a bedroom and cannot be moved as a rental home.
I have plugged in the TC and updated the software.
Now - do I want to A Create a New Wireless Network (remember I can't connect the TC to Mac using an Ethernet cable). B Replace an existing base station or wireless router with TC (only intend to use for TM as don't know other benefits as of yet). or C want TC to join current network.
Thinking C. If I choose C, it then asks A TC to wireless join current network (NO as already connected using Ethernet). B want to connect TC to my network using Ethernet to extend my existing wireless network. C want to disable the wireless network on this TC and connect it to my computer or network using Ethernet - CANNOT do this as devices can not be in the same room.
Or do I want to create new wireless network - first set of questions - choice A? What is the benefit to creating a new one when I won't be in this rental house for longer than 18 more months??
Please help and quickly! Thanks!

Let me suggest some things.
But first ask exactly what wireless router you have now and what type of broadband service?
Are you happy with the wireless on the current router? If so, then you can plug the TC straight into whatever computer you have by ethernet, short 1M cord with no connection to the network. And use it without affecting your existing network at all. This is trivial setup.
Although you don't say exactly what Mac and printer you are using, is it a desktop? Laptop it is definitely easier not to plug it in, but a desktop you can plug in the TC and it will all sit happily together.
How is the printer connected and to what?
I am not sure why you need such quick help.. this is all minor setup stuff.. and 18months in todays world is like permanent man.
Your multiple A, B, C are more confusing than helpful.
The best choices without more info.. are to replace the existing wireless router with the TC. ie your option B.. but how to do this depends on the type of connection. Is it cable or adsl? Can you easily bridge the existing modem router.. if that is what it is?
Think carefully in the ideal world what would you like..
and what do you have..
We can probably suggest ways and means to fit what you like to what you have.. without introducing a stack of options that are doing your head in.

How do I create a 1d array that takes a single calculation and insert the result into the first row and then the next calculation the next time the loop passes that point and puts the results in thsecond row and so on until the loop is exited.

The attached file is work inprogress, with some dummy data sp that I can test it out without having to connect to equipment.
The second tab is the one that I am having the problem with. the output array from the replace element appears to be starting at the index position of 1 rather than 0 but that is ok it is still show that the new data is placed in incrementing element locations. However the main array that I am trying to build that is suppose to take each new calculation and place it in the next index(row) does not ap
pear to be working or at least I am not getting any indication on the inidcator.
Basically what I am attempting to do is is gather some pulses from adevice for a minute, place the results for a calculation, so that it displays then do the same again the next minute, but put these result in the next row and so on until the specifiied time has expired and the loop exits. I need to have all results displayed and keep building the array(display until, the end of the test)Eventually I will have to include a min max section that displays the min and max values calculated, but that should be easy with the min max function.Actually I thought this should have been easy but, I gues I can not see the forest through the trees. Can any one help to slear this up for me.
Attachments:
regulation_tester_7_loops.vi ‏244 KB

I didn't really have time to dig in and understand your program in depth,
but I have a few tips for you that might things a bit easier:
- You use local variables excessively which really complicates things. Try
not to use them and it will make your life easier.
- If you flowchart the design (very similar to a dataflow diagram, keep in
mind!) you want to gather data, calculate a value from that data, store the
calculation in an array, and loop while the time is in a certain range. So
theres really not much need for a sequence as long as you get rid of the
local variables (sequences also complicate things)
- You loop again if timepassed+1 is still less than some constant. Rather
than messing with locals it seems so much easier to use a shiftregister (if
absolutely necessary) or in this case base it upon the number of iterations
of the loop. In this case it looks like "time passed" is the same thing as
the number of loop iterations, but I didn't check closely. There's an i
terminal in your whileloop to read for the number of iterations.
- After having simplified your design by eliminating unnecessary sequence
and local variables, you should be able to draw out the labview diagram.
Don't try to use the "insert into array" vis since theres no need. Each
iteration of your loop calculates a number which goes into the next position
of the array right? Pass your result outside the loop, and enable indexing
on the terminal so Labview automatically generates the array for you. If
your calculation is a function of previous data, then use a shift register
to keep previous values around.
I wish you luck. Post again if you have any questions. Without a more
detailed understanding of your task at hand it's kind of hard to post actual
code suggestions for you.
-joey
"nelsons" wrote in message
news:[email protected]...
> how do I create a 1d array that takes a single calculation and insert
> the result into the first row and then the next calculation the next
> time the loop passes that point and puts the results in thsecond row
> and so on until the loop is exited.
>
> The attached file is work inprogress, with some dummy data sp that I
> can test it out without having to connect to equipment.
> The second tab is the one that I am having the problem with. the
> output array from the replace element appears to be starting at the
> index position of 1 rather than 0 but that is ok it is still show that
> the new data is placed in incrementing element locations. However the
> main array that I am trying to build that is suppose to take each new
> calculation and place it in the next index(row) does not appear to be
> working or at least I am not getting any indication on the inidcator.
>
> Basically what I am attempting to do is is gather some pulses from
> adevice for a minute, place the results for a calculation, so that it
> displays then do the same again the next minute, but put these result
> in the next row and so on until the specifiied time has expired and
> the loop exits. I need to have all results displayed and keep building
> the array(display until, the end of the test)Eventually I will have to
> include a min max section that displays the min and max values
> calculated, but that should be easy with the min max function.Actually
> I thought this should have been easy but, I gues I can not see the
> forest through the trees. Can any one help to slear this up for me.

Status at the time of creating the portfolio assets and Inactvo

Similar Messages

Maybe you are looking for