Status Bar Message problem
I have a problem with the status bar messages.
I have extended the ItemMasterData form and have added some items that hold extra data.
In add mode, I have to make sure that values go both in the system table (done automatically by sap) and my table in the db (done by me).
The issue is when the data in the system table is added ok but the insertion in my table fails.
I add my data to the DB in the FORM_DATA_ADD event on BeforeAction false . In case this fails, I have to place a error message in the status bar and remove the inserted Items object ( it is only ok when both insertions work ).
The problem is that SAP shows the "Operation completed successfully" and my error message is not displayed. Normally I could override the status bar events and modify the message, but I need the "Operation completed successfully" to be displayed when both inserts are successful .
Any ideas on this ? Or some work - around?
Hi,
Please check following thread:
link: [form data event;
Rahul
Similar Messages
-
1. Anyone know if these are still used much? I remember seeing them a lot about 10 years ago.
2. I tried this in CS5, and when I preview it there is no status bar message when I rollover a hotspot? I am testing in Safari on a Mac.
Thank you.Mostly, people don't mess with the default status bar messages any more. Since it can be used to hide the real destination of a link, the technique has been used in phishing. It's somewhat of a security problem.
IE9 doesn't seem to handle them them either. I found this page, which indicates that swapping out the status bar message is turned off by default in most newer browsers, which means that the user would have to enable it before any coding you put in would be effective.
http://www.quackit.com/javascript/javascript_status_bar_messages.cfm
It isn't a Fireworks issue. It's a browser security default. -
Hi All,
I have web Dynpro iviews in portal which are arranged in Worksets and roles. When we click on any role or workset, it is observed that the status bar message is changed accordingly. A long message starts displaying in the status bar due to Loading of the requests and directing to the pages and iViews . I have a requirement where either the status bar can be made to display only some fixed message or Status bar do not display any message at all. This needs to be done in whole portal. Please advice.
Thanks & Regards
HarsimranHi,
For disabling the Status bar, just add the below line of code in Masthead (between JS code)(com.sap.portal.navigation.masthead) & redeploy.
window.document.statusbar.enable = false;
For setting default value in status bar, use:
window.status="Welcome";
and remove all occurances of mouseover.
Regards,
Santhosh -
Deactivate the status bar message ?
Hi,
I want to Deactivate the Status bar message "Budget check.." which is coming while executing the BAPI BAPI_NETWORK_MAINTAIN in Tcode SE37. The output is correct but I just want to deactivate the standard messsge.
Regards,
deepthi.We get this Error in FM CO_ZF_PROJECT_BUDGET_CHECK in perform PERFORM send_gui(saplcozf) USING text-bck.
I was unable to deactivate this Message. -
Fetch the SAP Status Bar Message?
Hi Experts,
Pls. let me know that, How to pull/fetch the data (e.g.#) from SAP Status bar message, issued by SAP, while any creation takes place?
e.g.
When some thing (MB01) is created, SAP alert u with a Message, (like, saying that ''1234567890'' Document is saved/created) on the Status Bar! So, How to fetch this (#) SAP data in to my program?
ThanQ.
Message was edited by:
SridharSridhar,
1.All the messages will be stored in TABLE-T100.You can fetch the message from this table.
go to se11 and check T100 table.
press ctrlshiftf10.
in the sprsl field give it as EN.
press f8.
you will be able to see all the messages.
or
double click on the message on the status bar.
it will show you an help window.
there you can get the application area followed by the msg number.
(for ex Message no. AD399 AD-application area and 399 is the msg number)
now go to se91.
give the application area in the msg class
you can see all the messages.
2.If you want to raise your own message then you have to create a Message class and there you can give whatever the message you want.
Report zsridhar message-id zsr.
now double click on zsr you will be able to create you own message class where you can give you own messages which can be raised.
If any doubts revert.
K.Kiran. -
Suppressing status bar message after function call?
Hi,
I'm calling a few functions in a program.
After calling them, for example function "L_TO_CREATE_DN", I get a message in the status bar, in this case saying that a TO has been created successfully.
How can I suppress all status bar messages for all the functions that are being called in the program?
THX!Hi
Try to use the default excption error_message
CALL FUNCTION
EXCEPTIONS
error_message = 1
OTHERS = 2.
Max -
Bex status bar message "Accessing documents library"?
Hello everybody,
does anyone know what in detail the bw server does when the status bar message "Bex: Accessing documents library" (in German: Bex: Zugriff auf Dokumentenablage) is being displayed?
This message is coming up just before the variable-popup-window and, in our cases, is displayed up to 2 minutes and is therefore slowing down query performance...
Waiting for your answers,
bivision2008any exits in step 1 ? (CMOD)
Is this through the web, Excel, both? -
How to disable status bar messages
hi,
while loading a form or running the forms applications, forms applet writes log to the status bar of internet explorer.
i want to disable some of these messages. because i am listening status bar, for a specific message and these messages causes performance problem.
is there a way to do it?
regards , Engin.
here are the messages i logged :
Finding site: 10.222.4.51
Connecting to site 10.222.4.51
Connecting to site 10.222.4.51
Start downloading from site: http://10.222.4.51:8000/forms/frmservlet?config=tfs
Opening page http://10.222.4.51:8000/forms/frmservlet?config=tfs...
Opening page http://10.222.4.51:8000/forms/frmservlet?config=tfs...
Opening page http://10.222.4.51:8000/forms/frmservlet?config=tfs...
(2 items remaining) Opening page http://10.222.4.51:8000/forms/frmservlet?config=tfs...
Opening http://10.222.4.51:8000/forms/java/frmwebutil.jar
Opening http://10.222.4.51:8000/forms/java/frmall_jinit.jar
Opening http://10.222.4.51:8000/forms/java/frmall_jinit.jar
Opening http://10.222.4.51:8000/forms/java/frmwebutil.jar
Opening http://10.222.4.51:8000/forms/java/frmwebutil.jar
Opening http://10.222.4.51:8000/forms/java/jacob.jar
Opening http://10.222.4.51:8000/forms/java/jacob.jar
Opening http://10.222.4.51:8000/forms/java/tfsbeans.jar
Opening http://10.222.4.51:8000/forms/java/tfsbeans.jar
Opening http://10.222.4.51:8000/forms/java/tfsimage.jar
Opening http://10.222.4.51:8000/forms/java/tfsimage.jar
Opening http://10.222.4.51:8000/forms/java/jai_imageio.jar
Opening http://10.222.4.51:8000/forms/java/jai_imageio.jar
Opening http://10.222.4.51:8000/forms/java/clibwrapper_jiio.jar
Opening http://10.222.4.51:8000/forms/java/clibwrapper_jiio.jar
Opening http://10.222.4.51:8000/forms/java/jacob.jar
Opening http://10.222.4.51:8000/forms/java/jacob.jar
Applet loaded.
Applet initialized.
Applet started.
Opening http://10.222.4.51:8000/forms/java/tfsbeans.jar
Opening http://10.222.4.51:8000/forms/java/tfsbeans.jar
Opening http://10.222.4.51:8000/forms/java/tfsimage.jar
Opening http://10.222.4.51:8000/forms/java/tfsimage.jar
Opening http://10.222.4.51:8000/forms/java/jai_imageio.jar
Opening http://10.222.4.51:8000/forms/java/jai_imageio.jar
Opening http://10.222.4.51:8000/forms/java/clibwrapper_jiio.jar
Opening http://10.222.4.51:8000/forms/java/clibwrapper_jiio.jar
Opening http://10.222.4.51:8000/forms/java/java/awt/KeyboardFocusManager.class
Opening http://10.222.4.51:8000/forms/java/java/awt/KeyboardFocusManager.class
Applet loaded.
Applet initialized.
Opening http://10.222.4.51:8000/forms/java/java/awt/event/MouseWheelListener.class
Opening http://10.222.4.51:8000/forms/java/java/awt/event/MouseWheelListener.class
Opening http://10.222.4.51:8000/forms/java/oracle/forms/registry/Registry.dat
Opening http://10.222.4.51:8000/forms/java/oracle/forms/registry/Registry.dat
Opening http://10.222.4.51:8000/forms/java/oracle/forms/registry/default.dat
Opening http://10.222.4.51:8000/forms/java/oracle/forms/registry/default.dat
Opening http://10.222.4.51:8000/forms/frmservlet?config=tfs&acceptLanguage=en-us,tr;q=0.5&ifcmd=startsession
Opening http://10.222.4.51:8000/forms/frmservlet?config=tfs&acceptLanguage=en-us,tr;q=0.5&ifcmd=startsession
Opening http://10.222.4.51:8000/forms/lservlet;jsessionid=0ade042330d69eb05aec84b344128245ca217665e6c7.e3eNc3iPc3j0ax4LbNeKaxqKci1ynknvrkLOlQzNp65In0?ifcmd=getinfo&ifhost=EDP12PC58&ifip=10.222.12.58
Opening http://10.222.4.51:8000/forms/lservlet;jsessionid=0ade042330d69eb05aec84b344128245ca217665e6c7.e3eNc3iPc3j0ax4LbNeKaxqKci1ynknvrkLOlQzNp65In0?ifcmd=getinfo&ifhost=EDP12PC58&ifip=10.222.12.58
Opening http://10.222.4.51:8000/forms/lservlet;jsessionid=0ade042330d69eb05aec84b344128245ca217665e6c7.e3eNc3iPc3j0ax4LbNeKaxqKci1ynknvrkLOlQzNp65In0
Opening http://10.222.4.51:8000/forms/lservlet;jsessionid=0ade042330d69eb05aec84b344128245ca217665e6c7.e3eNc3iPc3j0ax4LbNeKaxqKci1ynknvrkLOlQzNp65In0
OpeningFirst off that's what's called a kernel panic and it's the most extreme software problem as the kernel itself is malfunctioning which everything else depends upon.
It's rather easy to resolve, there are usually two causes for it, outdated software or a problem with OS X itself like it lost part of itself somehow on the drive.
So instead of disabling it which you can't as the operating system is basically frozen (not all of it of course) you should just fix it up really quick and all is well.
Depending upon what operating system the machine has gives you different options to #8 Resinstall Just OS X over itself to fix issues in OS X, and with third party "hooks" called kernel extension files (kexts) that some software place into OS X itself.
So you do that here and it won't delete programs or files, but any program with a kext file in OS X is removed by the overwrite process.
So do #8 here and other Steps as you see fit to fix the machine.
..Step by Step to fix your Mac
Of course doing so is going to make some software not work, so you have to check to make sure before you reinstall certain software that it's been updated and works fine with the current OS X verison. -
I bought my original iphone right after it became available. I live in an area which does not have AT&T coverage. I used my business address (which is in the AT&T network) to obtain my AT&T account and activate my phone. I have been able to make calls and use all other features successfully until just recently. Now I am getting a message on the status bar that indicates there is "no network". An "E" used to appear in the status bar when I used my phone from home. Does anyone know how much usage in a non-network AT&T will allow before they request that you unsubscribe from their wireless service?? I love my iphone so I am hoping this will not happen. I did talk to an AT&T customer service rep and was advised to not worry about the "no network" message. And she thought I would be ok. She wasn't sure what the limitations were regarding other network usage. I remember when I signed up for the AT&T service reading something about being penalized for not using the phone in an AT&T coverage area. Anyone?
This is something you'd have to discuss with ATT. My understanding is they have the option of terminating all of your service if they deem you spend too much time roaming.
Some troubleshooting you can try:
1. Reset (hold the sleep/wake & home button until the Apple logo appears)
2. Reset network settings in the Settings options
3. Request a new SIM from ATT
4. Restore in iTunes -
Hi All,
Are there any function module or method that could use to check what message type (I,S etc) are prompting on the status bar?
Thanks.Hi,
If i understand you requirement correctly, you have made some customization to a standard program's PBO/PAI. This customization updates some Z Tables. Now the flow is such that your customization executes before Standard program has completed its validations and there is a possibility that an error might be thrown later in the program validation and in such cases you do not want your changes to be committed to the Z tables.
If my understanding is correct, i can think of below solutions.
1) Since you are customizing the standard code, look for a EXIT/BADI which get triggered on SAVE and add your code here.
If you have tried this already and didn't find a suitable enhancement, then try with the below solution.
Create an FM with the processing type as an "Update Module" (attribute tab of the FM in SE37), and pass the data that needs updated in the Z table to this FM, inside this FM you can have your custom validations and code to update the Z table.
Now call this FM "CALL "FM" IN UPDATE TASK" in the PBO/PAI of your customization.
With this what you will achieve is that, the update modules will be called only if the original transaction was committed successfully.
Regards,
Chen
Edited by: Chen K V on Jun 3, 2011 12:59 PM -
SAFARI "Status Bar" Behavior Problem
I have set up my web page to show people's names in the "Status Bar" when the cursor is placed over their face in a picture. It works fine in most browsers, including Firefox, but works poorly in SAFARI. I SAFARI, it shows for a part of a second and then disappears. In Firefox and other browsers, it shows in the status bar continuously until the cousor is moved off the person's face. That is what I want to happen in SAFARI. Is there some way to tell SAFARI to show the name continuously in the Status Bar, rather than just flash it?
I have set up my web page to show people's names in the "Status Bar" when the cursor is placed over their face in a picture. It works fine in most browsers, including Firefox, but works poorly in SAFARI. I SAFARI, it shows for a part of a second and then disappears. In Firefox and other browsers, it shows in the status bar continuously until the cousor is moved off the person's face. That is what I want to happen in SAFARI. Is there some way to tell SAFARI to show the name continuously in the Status Bar, rather than just flash it?
-
Black Status Bar Message Keeps Appearing in my Imac
Hi,
Does anyone knows how did the Black Message Box bottom appear in the Imac? Was it because of something that I accidentally pressed?
Please teach me how to get rid of the Black Message Box bottom right that keeps appearing on my screen as it is very irritating.
There is a male voice that will speak I navigate my imac. I have tried but found no ways to turn it off.Welcome to Apple Support Communities
You have to turn off VoiceOver. To do it, open System Preferences > Accessibility > VoiceOver, and turn it off. You have to turn off Speakable Items too -
STATUS BAR AT DIFFRENT POSITIONS
Hi to all,
i have the following problem:
The first call to a form modul shows the status bar/message line at the bottom of the applet window.
After exit_form and calling the same module again status bar/message line is shown at the
bottom of the forms module window.
In Forms 6i Patch 3a everything worked fine. Since Patch 9a and even in Forms
9i i got this behaviour.
In formsweb.cfg i use the following parameters:
usesdi=yes
HTMLbodyAttrs=TOPMARGIN=0 BOTTOMMARGIN=0 LEFTMARGIN=0 RIGHTMARGIN=0
width=1000
height=600
separateFrame=false
This parameters lets the forms applet window full fill the browsers window.
In the first modul the console window is set to null, in the following one's
the console window is set to the forms modul window(width=745 height=388). The
canvas size inside the called modul is width=744 height=387. I tried with other
sizes but still get the same behaviour.
Does someone got the same error or may be a solution ?
Thanks
HJ.AllesHello Darryl.
It's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author. -
I want to show a status bar that needs to be persistent on a page. for this I used the following in my master page
function ShowStatusBarMessage(title, message)
var statusId = SP.UI.Status.addStatus(title, message, true);
SP.UI.Status.setStatusPriColor(statusId, 'yellow'); /* Set a status-color */
HTML, call the JS method:
<a onclick="ShowStatusBarMessage('Title'!','Awesome message!')">
Display Status Bar message!
</a>
ref:
http://www.zimmergren.net/archive/2010/03/17/sp-2010-dynamically-displaying-messages-to-your-users-with-the-notification-and-status-bar-areas-in-sharepoint-2010.aspx
But what I want is
to call the function on load. So I used pushed ny function to _spBodyOnLoadWrapper using _spBodyOnLoadFunctionNames.push("YourFunctionName");,
it throws an error 'SP.UI.Status' is null or not an object
Next I created and
deployed a webcontrol and did a registerclientscript, that too gives me 'SP.UI.Status' is null or not an object
// Define the name and type of the client scripts on the page.
String csname1 = "AlertScript";
Type cstype = this.GetType();
// Get a ClientScriptManager reference from the Page class.
ClientScriptManager cs = Page.ClientScript;
// Check to see if the startup script is already registered.
if (!cs.IsStartupScriptRegistered(cstype, csname1))
StringBuilder cstext1 = new StringBuilder();
cstext1.Append("<script type=text/javascript> alert('Hello World!');");
cstext1.Append("var statusId = SP.UI.Status.addStatus('title', 'message', true);");
cstext1.Append("SP.UI.Status.setStatusPriColor(statusId, 'yellow'); </");
cstext1.Append("script>");
cs.RegisterStartupScript(cstype, csname1, cstext1.ToString());
What am I missing ?
How can I get to show a status bar on load of any page, just as you get a health analyzer message when you get into the Central Admin?
Thanks, Mano
Mano Mangaldas | Blog : http://howtosharepoint.blogspot.comOk, for some reason, it is not working for me. Below are the code that didnt work for me
<script type="text/javascript">
function ShowStatusBarMessage(title, message)
var statusId = SP.UI.Status.addStatus(title, message, true);
SP.UI.Status.setStatusPriColor(statusId, 'red');
ShowStatusBarMessage('Title!','Awesome message!');
</script>
This too didnt work
<script type="text/javascript">
function ShowStatusBarMessage()
var statusId = SP.UI.Status.addStatus('Some title', 'Some message', true);
SP.UI.Status.setStatusPriColor(statusId, 'red');
_spBodyOnLoadFunctionNames.push("ShowStatusBarMessage");
</script>
I did try to register client script block programatically, that too didnt work
String csname1 = "AlertScript";
Type cstype = this.GetType();
// Get a ClientScriptManager reference from the Page class.
ClientScriptManager cs = Page.ClientScript;
// Check to see if the startup script is already registered.
if (!cs.IsStartupScriptRegistered(cstype, csname1))
StringBuilder cstext1 = new StringBuilder();
cstext1.Append("<script type=text/javascript>");
cstext1.Append("var statusId = SP.UI.Status.addStatus('title', 'message', true);");
cstext1.Append("SP.UI.Status.setStatusPriColor(statusId, 'yellow'); </");
cstext1.Append("script>");
cs.RegisterStartupScript(cstype, csname1, cstext1.ToString());
Any help appreciated.
But the below code works..
<script type="text/javascript">
function ShowStatusBarMessage(title, message)
var statusId = SP.UI.Status.addStatus(title, message, true);
SP.UI.Status.setStatusPriColor(statusId, 'yellow'); /* Set a status-color */
</script>
<a onclick="ShowStatusBarMessage('Title!','Awesome message!')" href="#">
Display Status Bar message!
</a>
Thanks
mano
Mano Mangaldas | Blog : http://howtosharepoint.blogspot.com -
Problem in displaying messages in the status bar
Hi all,
I have a custom form and whenever user clicks on the save button after entering any data in it, i would like to display a message in the status bar(as like in standard oracle forms).
I got the following solutions from some Guru's but it dint worked.
Sol 1: Setting the CONSOLE WINDOW property of the form to the custom window name.
I tried it and got the following error while compiling the form.
FRM-40735: ON-ERROR trigger raised unhandled exception
ORA-06508
In my ON-ERROR trigger i have the standard code
APP_STANDARD.EVENT('ON-ERROR');
sol 2: writing the following code snippet in POST-INSERT or POST-UPDATE trigger
clear_message;
message('Data Saved', NO_ACKNOWLEDGE);
synchronize;
With both the solutions i dint get any positive output.
Is there any other suggestions ?
Thanks in Advance.
PraveenA hack: at the end of init() put
ActionListener hack = new ActionListener() {
public void actionPerformed(ActionEvent evt) { showStatus("My status message"); }
new javax.swing.Timer(1000, hack).start();
Then 1000 milliseconds after init() completes it'll display your message.
There's got to be a cleaner way but if you're satisfied with this, great.
Michael
Maybe you are looking for
-
Can no longer open PDF files in Safari 7 using Mavericks - help??
I cannot open PDF files on my iMac - not sure why - I am using Safari 7 & have downloaded Mavericks - it says I have to launch Acrobat 8 and agree to terms (or some such thing) Please help. How do you make Reader 9 the default for opening pdf's?
-
Hi, We have some problems with our Root CA. I can se a lot of failed requests. with the event id 22: in the logs. The description is: Active Directory Certificate Services could not process request 3686 due to an error: The revocation function was un
-
How can i get rid of babylon and restore google as my default search engine?
Somehow I have got Babylon onto firefox as the search engine. I don't want this and want to go back to google as the default search engine. How do i set google as the default search engine? Also babylon will not let me go to google .com but always ch
-
I can't paste text at the WYSIWIG editor in FireFox 17.01
After the upgrade to FireFox 17.01 the HTML WYSIWIG editor restricts some actions; by example cut/copy and paste. The editor suggests in the past 4 steps to enable those actions but does not works with this version. Any clues? Thanks.
-
Is it possible to move itunes library from a windows computer to an external drive (time capsule) while, keeping all the playlist, ratings, plays etc. And importing this library to itunes on a macbook air? And how is it done? The media files should s