Status bar of Oracle from runtime applet is not displaying all of a sudden

Hello,
The status bar of Oracle form runtime applet is not displaying all of a sudden..It was displaying before but now its not......It helps me to see errors......how can I restore it?

My console was set to a specific window name..it was not null at all....but the status bar wont show...
But I solved it ...by changing the applet size...
Applet container size is controlled by the HEIGHT and WIDTH parameters in the formsweb.cfg. To maximize the applet area to the size of the browser, do the following:
HEIGHT=100%
WIDTH=100%
Thank you all for your help and support...
Edited by: user10746194 on Feb 11, 2010 6:33 AM

Similar Messages

  • Flash Player linux, grey box issue (youtube vids and some applets do not display)

    I posted this question on my distro-specific forum as well as linuxquestions.org, however it appears to  be a unique problem, so here it is:
    When viewing videos on youtube.com, most other websites, and when trying  to run certain flash games, the flash applet will not display (though  the audio will play). Instead of displaying the flash applet, there  will be a grey box where the flash video or applet would normally be.
    This problem occurs on Firefox and Chromium, but not on Opera.
    My Specs are as follows:
    Distro: PCLinuxOS 2010 (32-bit)
    flash-player-plugin: 10.1-2pclos2010
    firefox: 3.6.6-1pclos2010
    swfdec has never been installed (to my knowledge)
    I did a lot of investigating about the problem but have turned up no  solutions thus far. Here are my results.
    Flash videos and applets which allow  access to the settings menu (like youtube played from their website) do  not display, however flash videos and applets which do NOT allow access  to the settings menu (including youtube videos embedded in other  websites) WILL display.
    Reinstalling flash-player-plugin and firefox through synaptic does  not solve the problem (though note that PCLOS works with rpm files, not  deb files. apt4rpm does not support the remove --purge operation,  however reinstalls are said to overwrite custom configs with stock  ones.)
    Creating a new firefox profile and/or starting FFox in safe-mode  does not solve the problem
    Creating another user and running FFox from that user will  properly display flash videos
    Comparing default plugins between my main user and new user shows  that there is no difference. So this likely rules out a defective  extension or plugin binary.
    Deleting ~/tmp/plugtmp* folders when FFox is closed does not solve  the problem.
    Removing the ~/.macromedia and ~/.adobe folders does not solve the  problem. (have checked permissions between the new test user and main  user, and they are equivalent)
    Downloading libflashplayer.so from the Adobe website and copying it  to /usr/lib/mozilla/plugins has no effect on the problem.
    I'm thinking that there might be somewhere else that flash stores  configurations for my user, and that maybe the settings there are  corrupted and would need to be purged. However frantic googling has  turned up nothing useful so far.
    Does anyone have any suggestions for me?

    The problem, at least in my case, was QtCurve's opacity. If I have opacity set to less than 100%, flash would not display for sites like Youtube and Vimeo, but worked elsewhere.
    The solution for me was to go into qtcurve's settings, and put npviewer.bin in the application exceptions section for window and menu opacity. Doing that, I was able to keep my transparent menus, and also use flash everywhere.
    You can find out what the application name is by launching your browser of choice in a terminal with qtcurve debug turned on, like so:
    QTCURVE_DEBUG=1 firefox
    If you watch through the lines that start with "QtCurve" you'll see "Application name". Look for the one that shows up when you try to load a video. In my case it was npviewer.bin. In yours, it might be nspluginviewer or something else. If you add an exception for that specific application, you'll fix your problem without having to compromise on your theme.

  • Form does not display all records from table

    Hi guys
    I modified one form that was based on a signle DB table. I removed certain fields from the table and added some extra fields to that table. Then based on the new table I also modified the form and removed the text items related to old fields in the table and added new text items pointing to the new fields now. II have checked all the new items properties and they have don't seem to be wrong or so. But now the problem is the form does not display all the records from the table. before it used to display all records from the table when qureied but not now. It only certain records from the table containing all new data and also old data but the form does not display other records though I don't see any obvious discrepancy. Remember that the before doing the modifications, I have table back for the old, created another table that contained new records for the new fields, and then I inserted the old records and updated the new table data in the new table with these new table values. So this way I have got my new table. Could someone help why the new modified form fails to display all records from the new table updated table though it display some of them successfully.
    Any help will be appreciated.
    Thanks

    hi
    Set the block property of "Query All Records" to "YES"
    hope it will work.
    Faisal

  • Using a first gen iPad.  Video and audio from internet sites simply stopped working all of a sudden.  Any suggestions?  Thanks.

    Using a first gen iPad.  Video and audio from internet sites simply stopped working all of a sudden.  Any suggestions?  Thanks.

    1)access the router web ui
    2)go to the Mac Address Clone subtab , enable it and click "Clone" . Save the settings
    3)do a power cycle
    4)check whether the router gets an internet ip add now ..

  • My photos from camera row are not going all to photostream in any device, iphone 4s and ipad mini What can I do, please.

    My photos from camera row are not going all to photostream in any device, iphone 4s and ipad mini What can I do, please.
    Both devices have the Icloud on.

    Try this on All Devices...
    Close All Open Apps...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • How do i type in tamil in microsoft office for mac? my previous tamil documents from my pc are not displaying the font correctly, nor am i able to use the inbuilt mac tamil font to write in microsoft office

    How do i type in tamil in microsoft office for mac? my previous tamil documents from my pc are not displaying the font correctly, nor am i able to use the inbuilt mac tamil font to write in microsoft office

    You should probalby post your question on Microsoft's own forums for their Mac software since it's their stuff you're asking about:
    http://answers.microsoft.com/en-us/mac

  • The bill document printed from a contract is not displaying the amount at i

    When we execute the print layout form a bill document from a contract is not displaying the amount at item level however the total amount of the document is correctly displayed in the button of the document.
    Thank you and best regards.

    Hi Alberto
    please check the field which has been mapped in the SAP Script and the Smart form.
    it must be the header amount field. you can replace it with the VBAP_NEtWR or similar fields like kzw1 if you have mapped the sub totla sot get the amount at item levels
    thanks
    akasha

  • Restore from time machine does not list all my backups.  I know they exist but there dates are not present on the restore list.  Any help appreciated.

    Restore from time machine does not list all my backups.  I know they exist but their dates are not present on the restore list.  Any help appreciated.  If I must use one of these older dates to restore, how do I then get the more current data off time machine?

    Ok, so am i correct in saying that the steps to fix are as follows.
    That's one option, but not what I meant by restoring in the time-travel view. The latter is what you get when you enter Time Machine.
    is the fresh install not going to be able to "see" the time machine backups that I have at the moment.
    It should, but sometimes people report that it fails. I'm not sure why that happens.

  • Some applets is not displayed in the ie6 browser

    Dear all
    Pls hlp me in this issue
    Some applets is not displayed in the ie6 browser
    it is displayed after enabling the Java sun "Use Java 2v1.4.0 for applet "
    but some applets is displayed without enabling Java Sun
    Insted of JavaSun we use MicroSoft Vm
    how is this possible

    Hi,
    As Julien said you can install the SQL Studio and check for the table starting with M followed by a number with your rootnode name. Similarly for the child node also. If you see that the data is present please check if you have written a BIND method for your table, form in the either the INIT or the supply function.
    Regards,
    Narayani

  • Why can't I export my newsletter from CS into a pdf file all of a sudden?

    Why can't I export my newsletter from CS into a psf file all of a sudden?

    We can't know. You are not providing any relevant details - program versions, system information, PDF settings used and so on.
    Mylenium

  • How to customize the applet's status bar in Oracle Forms 9i

    I extended the statusBar class to include our own message in the applet's status bar. Using JDeveloper I compiled the class and jared the class file. Eventhough I placed that jar file in the classpath, it is not shown in the "import java classes" dialog box.Could anyone help me. Thanks in advance.

    Hi,
    it needs to be in the path configured in the Forms_Builder_Classpath registry variable.
    Frank

  • Status Bar at the bottom of applet

    Hi,
    How can I get rid of Status bar at the bottom of an applet?
    I dont' wana see word "Java Applet Started". I have called
    JFrame.setDefaultLookAndFeelDecorated(true);
    Everything is fine, but the unwanted status bar at the bottom.
    Any help is greatly appreciated.
    Regards

    Howdy.
    Not sure what you are trying to achieve here. The appletviewer sounds like it is working as designed. If you are writing an applet then I'd assume that you intend for it to be accessed via a web browser. The appletviewer is simply a test mechanism.
    However, your concern about the way in which the appletviewer presents itself leads me to think that you are intending all users to run your app. using the appletviewer. If this is the case then why not just create the frame directly? This code does just that.
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    public class SimpleJFrame extends JFrame {
         public static void main(String[] a){
              SimpleJFrame cleanFrame = new SimpleJFrame();
         SimpleJFrame() {
              // user interface
              setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
              setTitle("SimpleJFrame");
              Container cp = getContentPane();
              cp.setLayout(new FlowLayout());
              cp.add(new JButton("Press"));
              cp.add(new JTextField(8));
              pack();
              show();
    }regards
    sjl

  • My Applet is not displayed correctly/won't load

    Hi Everyone,
    I'm having some trouble with my Java applet. It uses a few Swing components, JButtons and things. When I load the applet into an IE window, it says that the applet has loaded in the status bar but there is nothing visible in the window. If I move my mouse over any of the Swing components, they magically appear! However, the applet will display fine with appletviewer. Any help would be much appreciated.
    Ben

    Maybe something like this could do the trick:
    public void paint (Graphics g) {
         super.paint(g);
         // your code here
    }

  • Lately pdf files from the Web do not display properly; what is wrong and how can I fix it so I don't have to use IE?

    I am a professor and frequently need to open pdfs of academic journal articles from electronic databases. Within the last two or three weeks, when I try to do this using Firefox, only the first page of the pdf displays and the rest are blank. In addition, a bar appears across the top with the message "This pdf file may not display properly." So I have had to switch to Internet Explorer to open the files and do my research. What is going on and how can I fix it so I can open pdf files from the Web in Firefox and have them display properly?

    My question is simple - why would you put an application in production that has a lot of bugs? To replace a good and steady Adobe product? My customers will believe that I put a pathetic fallible form online. They are not sophisticated on computers so I just tell them to use IE. Ugh
    I must agree with pgwebgirl!

  • [Solved] nm-applet does not display in normal user's panel

    I installed Arch Linux yesterday. Today, I am trying to get some of the refinements working. I installed OpenBox as a standalone window manager. I got several things working exactly the way I wanted as root, such as networkmanager, nm-applet, and pypanel. When I startx as root, the nm-applet is properly displayed in the pypanel.
    Then I discovered that I could not run an X application as the normal user without first running "xhost +" as root. At this point, it dawned on me that I am not supposed to run startx as root, but as the normal user. Duh!
    So, I thought I set up everything the same way for the normal user. When I startx as the normal user, OpenBox runs, nm-applet runs, and pypanel runs, but pypanel does not display the nm-applet icon. I can now run my X application as the normal user, so that is good.
    My .config/openbox/autostart file is exactly the same for root and my normal user:
    (sleep 3 && pypanel) &
    (sleep 3 && /usr/bin/nm-applet --sm-disable) &
    nm-applet was started by this code, because ps -ef shows it running and owned by the normal user:
    [tim@(none) ~]$ ps -ef|grep nm-applet
    tim 2311 2306 0 15:27 tty1 00:00:00 /usr/bin/nm-applet --sm-disable
    tim 2332 2327 0 15:27 pts/0 00:00:00 grep nm-applet
    [tim@(none) ~]$ ps -ef|grep networkmanager
    root 497 476 0 14:14 ? 00:00:00 /sbin/dhcpcd -B -K -L -G -c /usr/lib/networkmanager/nm-dhcp-client.action eth0
    root 869 476 0 14:30 ? 00:00:00 /sbin/dhcpcd -B -K -L -G -c /usr/lib/networkmanager/nm-dhcp-client.action ra0
    tim 2345 2327 0 15:27 pts/0 00:00:00 grep networkmanager
    Why does pypanel display the nm-applet icon for root but not for the normal user?
    Tim (newbie to Arch but previously ran ArchBang for six months)
    Last edited by ratcheer (2012-05-02 22:34:30)

    I have now switched to tint2 from pypanel, anyway. It is much cleaner and easier to use. At least in my opinion.
    Tim
    Last edited by ratcheer (2012-05-03 02:31:59)

Maybe you are looking for