Status change for Delivery

HI
For one of the line item in my order once after PGI completed order status is changed to completed though billing is not yet started, for all other items its not like this,.For item cat billing relevence is set as A -Delivery relevent. Checked completion rule no probs.
Can anyone tell me any utility program to change delivery status from Completed to Being processed?
Any other ways?
Cio
Siva

Hi Siva,
I understood that you have a couple of items in sales order and you did PGI for One Line item for which it is showing as Completed in the Status.for remaining items are not delivered and not done PGI for which you are not getting the Same Status of remaining items.you cannot change the Status of the item for which the PGI is completed.
I Hope through the Program also you cannot chanage the delivery Status of the line item because its shows the Status as Complete.
Ex:- Once you do the PGI will be and stock will be deducted for the particular Material.
If you are changing the Status of the Delivered and PGI material it will not be updated in the Stock overview.
This will leads to further complications.Its not Advisable.
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Similar Messages

Status Change for Purchase order in Process Purchase order

Hi All,
We have implemented SRM 4.0 with Extended Classic scenario.
SRM does provide standard status for Process Purchase order worklist (such as Ordered, Held, Error in Process etc.). Is there any BADI i can use to overright my own status message for the PO.
To give brief background of the requirement. Client wanted status to be changed to "Cancel" For POs whose all the line items we have deleted or "Close" when Last delivery or Final Invoice check is ticked.
I am aware that i can use BBP_DOC_SAVE_BADI as structure BBP_PDS_ITEM i can get items deletion indicator. But will i able to change the standard Status message?
Presently even though all line items marked delete still shows PO as "Ordered" status.
Kindly let me know if i can acheive with anyway.
Thank you
Ritesh

Hi Masa,
Thank you for your response. I have few doubts about the configuration which you have suggested.
- Define Status schema for User status will create a status Profile in which i have to include my own status. In the document of Define Status Schema it specifies that After creating User profile you have to assign same profile to transaction types. (I.e. BUS2201 or BUS2121 etc).
My concern is will my own status profile over-write the standard status which is coming? such as Ordered, Created, Transmission fail etc.
If so then do i have to create status profile to include all the Standard Status message in it as well?
- Other thing i found that Ordering PO goes through many standard status message (COMP, CRTD, CTRA, DCOM, ORDR) and always the last status in the Hearder will display on ITS level. Is my understanding right?
- I found that there is a standard system status message I1045 (BECN Cancel) Can i use this through BADI?
Kindly let me know.
Thank you once again.
Regards
Ritesh

Sale Order Status Change after delivery of materials from projects

have ETO sccenario which consists of all modules such as SD,PS.PP etc. Materials will be procured from external vendors & manufactured inhouse through project systems. After delivery of materials from project systems, billing & invoicing will be done at sales level.
On delivery of materials from projects, sale order status remain open. Request you to look into the matter & suggest about status change of sale order after delivery / billing.
Regards,
Ranjan

Hi,
In sale order, WBSE is assigned. Delivery of materials are through cns0. then subsequently picking / packing / billing will happen at sales level. Billing is of delivery related. Please suggest to fix the issue.
Thanks & Regards,
Biplab Ranjan

Report of List of all status changes for various production orders at a tim

Hi,
Can I have a standard report which shows the dates of each and every status (user & system) of a production order.
I need to have a report for a list of productio orders at a time.
If we go to CO03, header menu, status changes option is there, but it only caters for single production order.
Table JCDS is available to know the dates but I need a standard one rather than a Z development.
Or you can guide me any function module.
Thanks,
Kumar

Hello,
You will get the details of status in following table.
JEST - for object status
JSTO - Status Profile
TJ02T - to Decode the status Number
as the status data you will get from JEST is in very typical form you have to use TJ02T to find the exact status
AM

System Status Change for Project Definition

Hi,
I am working on a requirement to notify the Project Manager when the Project Status changes to REL.
I couldn't find any user exits where I can add the code to send an e-mail notification at the time of status change of the Project Definition or the WBS elements within the Project.
I checked for events in Business Objects BUS2054(WBS) and BUS2001(ProjectDefinition) which might get triggered at the time of status change. I couldn't find any events relevant to Status Change.
Any ideas how to handle this requirement ?
Regards
Bhooma

I found a solution to this issue.
Regards
Bhoooma

How to change status fields for delivery vl01n or vl02n

Hi guys, I am new here.
I would like to ask how can we change the status field (LFSTK & LFGSK) in internal table IT_XVBUK and IT_XVBUP after we manipulate the quantities in the delivery order screen. I have tried BADI = LE_SHP_DELIVERY_PROC, Method = SAVE_DOCUMENT_PREPARE, but unfortunately, I can't change those status field from there. Is there any other alternative(eg user exits etc). Please help.
Many thanks.
weng

You can script it. So on you docReady event put xfa.form["#subform"].locale="en_CA" or "en_US". Or even assign it from a value in an xml element.
Kyle

Approvals process for Delivery document

Hello Experts,
I have a non conventional scenario, that needs to be handled by SAP Deliveries (Created without reference). Business scenario is as follows:
A research organization has multiple testing sites across the globe. It already has SAP system installed for its day to day processes. The organization has testing sites across the globe which order specific chemicals from a primary site. Now it is required to capture the delivery related part of this process needs to be mapped into SAP. SAP Delivery document would be used to meet this requirement.
However, the legacy system has an approval process in place. i.e. there are 4 lines in a request, it is quite possible that these 4 materials have 4 different 'owners'. These 'owners' 'approve' the release of specific chemicals in the legacy system.
The requirement is to map this line item level approval in the delivery document. However, Delivery Block is only at header level. Please provide suitable pointers so that this can be captured in standard SAP, or if not possible suggest appropriate customisation.
Thanks in advance,
Onkar

1. Would it be possible to control the workflow for a delivery at line item level. If yes how will the approval result in status change in Delivery?
I think we can initiate the work flow line item wise .It should be populate services for object tab.That is the reason when some thing is missed you should put some check point before you do PGI the delivery completly approved or not.
2. We have only 2 statuses: picking completion and PGI. The delivery in legacy system has 2 more statuses, and they are to be captured in SAP delivery(at header level). Is it possible to add statuses to the delivery, or use some of the standard ones?
What are other 2 status you required ?.If it is really required then check in any otions VOFM to add some fields in header .
3. I am not able to edit price in the delivery, despite adding pricing procedure, and making the item category relevant for pricing. The pricing fields are grayed out. Am I missing anything?
*Did you make any pricing configuration for the delivery type ?.If not do configuration.
SPRO>Logistics Execution>Shipping>Basic Shipping Functions>Pricing-->Define Pricing Procedures for Delivery*

Service Order status change thro' Action

Hi all abaper
After completing billing, thro the action I am changing service order user status as completed. i hv written my code in class method.
After billing as action runs my code from method execute and changes the status properly and gets save into system but action status shows incorrectly processed and comes in red colour in action monitor. following is my code plz help me
Moderator message - Please respect the 2,500 character maximum when posting. Post only the relevant portions of code
Edited by: Rob Burbank on Oct 13, 2010 11:13 AM

Are you processing status codes out of sequence? Talk to your functional specialist or look at the status config for these documents...sounds like you're going to completed without first setting a status code that would have to be there prior to your status code...I seem to recall doing status changes for these documents that were a multi-step process...set TECO, then CLOSED or something like that?

User Status change problem in Process Order

Hi,
We are in process of upgrading our system from 4.6C to ECC 6.0. I have a problem with User status change for process Orders.
In 4.6C we are using the profile x with settings:
10     ZNEW     Created process order     10     90     1     1     ZSTA
20     ZLCK     Locked process order     20     90     1     1     ZREV
30     ZOPN     Reopened process order     20     90     1     1     ZOPN
40     ZMST     MES order started     20     90     1     1     ZMST
50     ZMCL     MES order closed     20     90     1     1     ZMCL
90     ZTEC     Technically completed      20     90     1     1     ZTEC
In ECC 6.0 we also use the same profile settings as above.
The problem is in ECC 6.0 when I do a goods receipt the User status changes to ZTEC . The process followed is ..Create process order, Release Order, Goods issue, Phase partuial confirmations, Goods receipt and then Finla confirmations of phases. Now in 4.6C if i do the above process the User status remains at ZMST and it only changes to ZTEC when i technically complete the order but in ECC 6.0 when I do a goods recipt from above steps the User status changes to ZTEC. THis should not happen.
Any pointers will be very helpful.

Hi,
The log for production order preliminiary costing is not saved. Therefore, once the order is saved, there is no log available anymore (this is by the way a question of PP; none of the logs is saved).
Hope that helps...
Regards,
Declan

Unable to commit the project status change

Dear Experts,
I am developing a utility program to change the status of multiple projects at once.
I am changing the status of Phase, task, check list,check list item and Project status from
Create to Release, release to Complete and to Work Effor Complete.With respective status change BAPIS.
when ever the projects is not able to change the status success fully due to validations
such as person respondsble not mainted or any other basic data is missing,
We are not committing the changes if every thing goes fine we are commiting with BAPI: BAPI_CPROJECTS_COMMIT_WORK
but when we commit with this it still retaining the previous project status in LUW and trying to commit previous project too.
and commit is getting failed.
I am not able to roll back or free the project with BAPI:BAPI_CPROJECTS_ROLLBACK_WORK and BAPI_BUS2172_FREE
BAPI_CPROJECTS_ROLLBACK_WORK: when iam trying to use this BAPI it is going to short dump
BAPI_BUS2172_FREE: It is returing error saying unable to free the project.
Could you please tell how to roll back the changes to the project or how to commit only success full projects (Project with out any errors in status change.)
Kindly do the needful
Thanking you.
-ravi

Program flow
Loop at It_Project
*Status Change for Check List
CALL FUNCTION 'BAPI_BUS2176_SET_STATUS'
    EXPORTING
      checklist_guid                = p_guid
IV_STATUS_PROFILE             =
     is_business_transaction       = lv_bus_trans
     TABLES
         return                    = t_return.
*Status Change for task
CALL FUNCTION 'BAPI_BUS2175_SET_STATUS'
    EXPORTING
      task_guid               = p_guid
      is_business_transaction = lv_bus_trans
    TABLES
      return                  = t_return.
*Status Change for project
CALL FUNCTION 'BAPI_BUS2172_SET_STATUS'
      EXPORTING
        project_definition_guid = p_guid
        is_business_transaction = lv_bus_trans
      TABLES
        return                  = t_return.
If there is a sucess in changing the status.
CALL FUNCTION 'BAPI_CPROJECTS_COMMIT_WORK'
    TABLES
      return = t_creturn.
Else.
    CALL FUNCTION 'BAPI_CPROJECTS_ROLLBACK_WORK'
      TABLES
        return = t_rreturn.
Endif.
Endloop.
In the above code when we are executing BAPI_CPROJECTS_ROLLBACK_WORK is going for dump.
If we simply commit with BAPI_CPROJECTS_COMMIT_WORK for all the projects then if any project
commits with error same error is re produced for all the following projectsid (unable to destroy the LUW).
and in CRM we can't use 'BAPI_TRANSACTION_ROLLBACK'.

Assignment Status Change Requirement.

Hi Experts ,
We have a requirement in a HR report , where we have to capture the "Data Entry" date for assignment status change.
for example :
If an employee assignment status changed to inactive from active on 01-OCT-2012 , and the data entry into oracle is on 18-OCT-2012 , I have to capture the "date of entry into oracle i.e date of assignment status changed in Oracle , in this example 18-OCT-2012".
Initially i felt to use the "Last Updated Date" but if some data is changed in assignment form on 19-OCT-2012 in "CORRECTION" mode , the last updated will be override with "19-OCT-2012" , but the original date the assignment status changed is on 18-OCT-2012.
Any help or pointer please to achieve the requirement.
Thanks
VJ--

You need to audit the assignment table.
oracle.anilpassi.com/audit-changes-in-oracle-hrms.html

If my IPHONE 5 order status has changed from "processing" to "preparing for delivery" is there a chance I will receive it sooner than the 10/5 date that it is scheduled for?

I pre-ordered my iPhone 5 on 9/15 at 4am EST. It said shipping in 2 weeks with an delivery date of 10/5... yadda yadda yadda. This morning my order status showed as 'processing'. This afternoon it changed to 'preparing for delivery'. Is there a chance I will now receive before 10/5? Trying to plan accordingly. Thanks in advance for any info you can give.

I was in the same boat. I ordered @ 5:09AM EST on 9/14 and had the 10/5 delivery date. My status changed from processing to preparing to ship yesterday 9/21. I got an e-mail from Apple @ 4:22AM this morning 9/22 that it has shipped (along with the precious tracking #)! I would expect it would arrive by this Friday 9/28 at the latest.

Picking status in Out. delivery changed to status A after GR post with MB0A

Hi,
I am facing an issue in our production system, these is the scenario:
- Replenishment delivery
- ZPicking confirmation idoc sucessfully picked the outbound delivery and post the GI. The material was cut and it was batch splitted.
- Then it was performed a GR (mov 101) against a stock transfer order via MB0A.
- After this GR posted, the status of picking of the parent material of the batch split was changed from status " " (Not relevant) to status "A" (Not yet processed).
- Also the status at header level was changed.
Current status of the delivery
Header Status
Picking Confirmation --> B
Total Gds mvt status --> B
Item Status
Item 10:
Pick confirmation --> A
Goods movt --> B
We have tried to reverse the GI to generate it again and reset the statuses but it is not possible to do it via VL09 neither MBST, etc.
Any idea on how to correct this problem?
Thanks,

Hi,
What is the moment type being taken for PGI through idoc?check the moment type definition for its allowable transactions and foe reverse.
Regards,

How to configure workflow for status change of a salesorder.

Dear Friends,
I want to generate Idocs after a sales Order delivery status changes
using workflow.
Please tell me the procedure ,as i am doing this for the first time.
thanks,
jeevan.

Suggest using "Modes" in PPM. Mode 01 will have "x" capacity, mode 02 will have "y" capacity and so on. You will have to give a slightly different resource name for each mode. E.g, If there is a multi capacity resource named "RESOURCE", then first create following resources in the Resource master : RESOURCE_X and RESOURCE_Y. Define individual capacities ( Resource is same, only we are separating capacities). Then include these in the PPM - mode 01 = RESOURCE_X, mode 02 = RESOURCE_Y.
Hoe this helps

Sales order as complete and change the delivery status.

Hello All,
We produces an order but then the customer calls and does not want the material so we in turn will scrap the material against the production order using transaction MB1A mvmt type 951 E.
Since the material were scrapped and no material were shipped against the sales order, the sales order u201Coverall statusu201D remains open and the delivery status is u201Cnot deliveredu201D.
To close the order we u201CRejected line itemu201D and moved on.
I would like to know if there is another way we can set the sales order as complete and change the delivery status.
Regards
Amit

Hello,
you can use the status profile for the same. but a better way would still be to use the rejection reasons . the rejectionr reasons are very well integrated with the document flow as well as transfer of requreiemnts to Production
so a best practise would be to use rejection reason
hope this helps
Thanks
akasha

Status change for Delivery

Similar Messages

Maybe you are looking for