Status control table - 'Perform update for status control table for cube '

Hello Experts,
While loading data to DSO, I am getting this message - 'Perform update for status control table for cube Z3MLQUA'.
What is status control table ? and can I have some inputs as to how to solve this issue
Regards,
arjun

Hi,
This message is not a issue in itself. It is just a SAP message which means that the system is checking/updating the system tables to carry out the operation whether it can be done or not.
If your loads are failing at this step or after this message there can be many reasons, check some of  the possible reasons below
Performing check and potential update for status control table
Update from PSA error in Process Chain
problem in deleting request
Reporting not available ,even if Data is sucessfully loaded into DT
Hope this helps,
Kush kashyap

Similar Messages

  • IPhoto was working fine. Performed update for HP printer, which  should have nothing to do with iPhoto. But the next time I tried to open iPhoto, got this message. "To open your library with this version of iPhote, it first needs to be prepared." When I g

    iPhoto was working fine. Performed update for HP printer, which  should have nothing to do with iPhoto. But the next time I tried to open iPhoto, got this message. "To open your library with this version of iPhote, it first needs to be prepared." When I g

    What version of iPhoto? Assuming 09 or later...
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • Delta update for Cube :  0CRM_PRI  - Service Orders and Confirmations: Item

    Dear experts,
    For Cube : 0CRM_PRI  - Service Orders and Confirmations: Item
    Source data is from Two ODS 
       1. Confirmations (Item Data)  : 0CRM_CNFI and
       2. Service Orders: Item Data : 0CRM_PROI
    I have done Init upload to this cube from both this ODS.
    I am not getting delta option to this.
    When I am trying update Delta after init from ODS message is No new deltas in DataStore object 0CRM_PROI for update. No delta option available . It is showing  Initial and Full Update option only.
    How i can initiate delta option for this Cube ?  Please update us.
    Thanks in advance.
    Regards,

    Hi,
    you can use DTP's to laod data from ODS to cube .. it will take deltas ..
    With a data transfer process, you can transfer data either in full extraction mode or in delta mode. In full mode, the entire dataset of the source is transferred to the target; in delta mode, only the data that was posted to the source since the last data transfer is transferred. The data transfer process controls delta handling and therefore allows you to fill several targets with different deltas from one source. With a data transfer process, you do not need to explicitly initialize the delta method as you do when copying data with an InfoPackage.
    or you can create a sepeate Ip for delta apart form full and init .. that will laod delat data in cube ..
    Regards,
    shikha

  • Performance Optimization for Cubes

    Hi All,
    In our project, we have a daily proces chain which will refresh four reporting cube, which is consuming 8-10 hours to complete the refresh. We have suggested to archive the historical data to the new cube to improve the performance of the daily load
    In UAT, the performance of the daily load did not improved after we performed the archiving.
    Kindly suggest the performance improvement for the cubes.
    Regards
    Suresh Kumar

    Hi,
    Before loading the cube , you need to delete the index and once the load is complete recreate the same.For this you have to go to the manage screen of the infocube----> Performance Tab.
    Also Create the DB Statistics.For this you have to go to the manage screen of the infocube----> Performance Tab.This will reduce the load time to a considerable amount.
    Also increase the Maximum size of the data packet in the Infopackage. For this you have to go to the infopackage-->Scheduler in the menu bar--> Data S. Default Data Transfer.Increase the size to a considerable amount(not very high).Also increase the Number of Data packets per info IDOC. This field will be available just after Maximum size of the data packet in the Infopackage.
    Hope It Helps,
    Regards,
    Amit
    Edited by: Amit Kr on Sep 4, 2009 5:37 PM

  • Secondary index on aggregate table and cube

    Hi to all,
    I have small doubt.
    1. Primary index created in F and E table of CUBE by system.
      then how secondary index in created in F and E table of cube,
      or
    is that B* tree index created as secondary index on F/E table of cube, when we use process type create / deleted index in PC for CUBE
    or if we do manually under performance tab for cube.
    2. Primary index also created on F and E table of aggregate by system.
      then how secondary index in created in F and E table of aggregate,
      or
    is that B* tree index created as secondary index on F/E table of aggregate, when we use process type create / deleted index in PC for CUBE
    or if we do manually under performance tab for aggregate
    Regards
    Pavneet Rana

    Hi,
    Thru process chains you can't handle them.
    You can do it by manual with help basis or ABAP team.
    BW server--> T code  SE11, Select table - Enter table name and display it.
    On next screen on tool bar you can see indexes --> click on it.
    Thanks

  • Performing check and potential update for status control table

    Cheers Experts,
    I searched in the forum, but I didn't find an answer.
    I'm working on a 3.0B BW system.
    After updating from PSA to an ODS, in the log I see the following line:
    "Performing check and potential update for status control table" and double clicking on it, it says:
    If data is loaded into an InfoCube, or existing data is edited (aggregated/compressed/deleted/got from a DataMart), then there is a change in  the potential reportability of the data , or the possibility of deleting data by request, or of aggregating or compressing.
    This status of each one of these Cubes is stored in a status table, that is updated when there is any change to the status of a request in the Cube.
    The system now analyzes the requests in the Cube and compares the calculated status with the status table.
    If deviations from the status table arise then you are given the option of adjusting the status table.                                         
    I have 2 questions:
    1) What is BW doing, mainly because I'm working on an ODS and not an Infocube?
    2) What can I do to reduce its execution time, since it lasts several minutes?
    Thanks and greetings.
    Roberto

    Roberto, did you ever find an answer to your question?  We also are experiencing long runtimes during this particular process running 3.x deltas from ODS to ODS and cubes.

  • Performance check for status control table

    Hi,
    When ever we activate any ODS or delete the request ,a message 'Performance Check for Status control Table ' appears.
    What does it mean?Please explain what is status control table and how it performs?
    Thanks & Regards,
    Dinakar.

    Hi,
    This message is not a issue in itself. It is just a SAP message which means that the system is checking/updating the system tables to carry out the operation whether it can be done or not.
    If your loads are failing at this step or after this message there can be many reasons, check some of  the possible reasons below
    Performing check and potential update for status control table
    Update from PSA error in Process Chain
    problem in deleting request
    Reporting not available ,even if Data is sucessfully loaded into DT
    Hope this helps,
    Kush kashyap

  • Inspection Lot Status (CROK)not updating for Certificate Reciept

    Hi
    I want to inspect vendor materials on the basis of thier Quality certificates
    1) Config Set up:
    a) Certificate type :YA72
    Cert for each PO  item :checked
    Certificate Check reqd:  :Checked
    Enhance cert processing: Checked
    b) Control key :0005 ( Delivery release ,Certificate)
    2) Material Master (QM View)
        QM Procurement : Checked
       Control Key :0005
       Certificate Type :YA72
    3) Goods Recipt
        MIGO < Purchase Data<Cert Reciept :Yes
        Inspection lot is created
    Question : Inspection lot status is not updating for Certificate Recived or not
                      My understanding is Inspection lot status should be :CROK -Certificate Recieved                                                                               
    CTCM-Certificate Missing
    Pls correct my understanding in case i am missing something
    Thanks in advance

    Is the status in the GR document have the cert field set as 5?
    Since you set the "certificate check required" you must do an explicit check of the cert.  I included below the help screen from this indicator in SPRO.
    You should be able to review the status of your cert in transaction QC53.
    FF
    Explicit Inspection of GR Certificate Necessary
    If you set this indicator, at goods receipt the system will generally perform as described in the field "Control without certificate".
    This means that even if you confirm the certificate receipt at goods receipt, and thereby set the status "2 - Certificate received", the system will still perform as specified in the field "control without certificate". See Control without certificate.
    You must explicitly check the content of the certificate recieved at goods receipt and set the status "5 - Certificate filed and inspected ", before, for example, the inspection lot status will be set to CROK.
    You can confirm that you have checked the content of the certificate in the certificate transaction or when making the usage decision.
    Note
    If you have set the indicator and chosen an unsuitable setting in the field "Control without certificate", the goods receipt can be generally blocked.
    This security function is generally used at electronic certificate receipt to check the accuracy of the certificate contents.

  • I purchased the newest software update for my ipod touch 1st generation and it is saying it is it will now begin download but the status bar doesn't even appear? How can I start the download?

    I purchased the newest software update for my ipod touch 1st generation and it is saying it is it will now begin download but the status bar doesn't even appear? How can I start the download?

    Well first off you shouldn't have had to pay for a download (just an assumption from the word "purchased".
    If you are trying to install iOS 5 on your iPod touch, it won't work they arent compatible. I suggest checking what version of software you are trying to install and posting it in this forum so people can have a better understanding.

  • Mass updates for Notification/Workorder status

    Is there any way for Mass update of 'status' because orders and notifications need to be un-teco before updating planner groups and work centers? we are using Mass update for IW58,IW38 & IW29 and there is no option for STATUS update.

    Thanks everyone for there response. I'll check the possiblity to add a button in IW28 for the closed notificaitons via any of the below BADIs:
    BADI_EAM_RIQMEL20_FCODE_CUS1 : Implement Customer Function Code in Notification List
    BADI_EAM_RIQMEL20_FCODE_SAP1 : Implement SAP Function Code in Notification List
    and for Work Order:
    BADI_EAM_RIAUFK20_FCODE_CUS1 :Implement Customer Function Code in Order List
    BADI_EAM_RIAUFK20_FCODE_SAP1 :Implement SAP Function Code in Order List
    In IW28 & IW58 there is option u201CPut in Processu201D in Notification Menu, but when I used this option  it says u201CNotification is completed -> can only be displayedu201D. I wonder why this option is not working if Notification is completed.

  • Hi.. IOS 6..1.1 is downloaded in my ipad 3.. then i clicked to install. ipad restarted with an apple icon and a status bar. but there is no update for almost 2 hours. please let me know how to proceed further

    Hi.. IOS 6..1.1 is downloaded in my ipad 3.. then i clicked to install. ipad restarted with an apple icon and a status bar. but there is no update for almost 2 hours. please let me know how to proceed further

    Hold down on the home and power buttons at the same time until the iPad shuts down and the Apple logo appears again.
    You might need to connect to a PC running iTunes to restore if the update got corrupted and can't complete

  • Just downloaded Yosemite on my Mac and the Yosemite update for Garage Band.  Now when I open an existing Garage Band project and click on a vocal track, a message window says, "Could not find General Audio 10" and have no smart controls.  Help?

    Just downloaded Yosemite on my Mac and the Yosemite update for Garage Band.  Now when I open an existing Garage Band project and click on a vocal track, a message window says, "Could not find General Audio 10" and have no smart controls for that track (reverb, etc.)  Help?

    Try this fix posted by Robinson Collins:
    Re: I downloaded Garage Band 2x and the same note appears: there is no General Audio 10. Please advise. Thank you.
    Try this: Go to your menu bar, select "Garageband" and then "Restore Sound Library..."
    It can take awhile to download as it's a pretty big library. You might need to also select "Update Sound Library..." after the restore is done.

  • For the 2nd day my iPhone 5 will not let me download updates for apps.  When i click update, it acts as if it is going to update but puts all apps in "waiting" status.  I've tried selecting each, as well as deleting and re-downloading but to no avail.

    For the 2nd day my iPhone 5 will not let me download updates for apps.  I've tried selecting each to click off wait, and have selected new updates indvidually instead of all together.  Also have shut the phone down and have even deleting the apps completely and re-downloaded but to no avail.  Each app continues to sit on my screen with the line below as if it is about to download but never does, and now any apps I've tried to updated will not let me use them.

    Oh my gosh I had the EXACT same problem, and for ages I couldn't figure out how to fix it until today. Here's what I did:
    First I went onto my computer, opened itunes, and un-installed tumblr, vine and kik. These were the apps I was having problems with (it said I had them on my phone but, like you, they didn't show).
    Then I went to the itunes store, searched for each one, and it said I could update them so I did (just FYI: for tumblr a window popped up saying "please click ok to confirm you are 17 years or older", so I did that also)
    When I went back to my phone and tried installing them again (still on my computer), it worked!
    I hope this helps, because it was incredibly frustrating. Good luck!

  • Catalyst Control Center Update for L645D-S403​6

    Greetings,
    Cant seem to find the update for the L645D-S4036. I cant use the one provided by AMD.
    Any help would be appreciated.
    Regards,
    linksword01

    All of the Toshiba drivers for your machine are located here:  Drivers for L645D-S4036.
    C.B.
    Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

  • I want to use a mac mini as a server supporting storage. Can I pair my macair to it for when I need to perform updates and maintenance ?

    I want to use a mac mini as a server supporting storage. I have other devices such as an iMac and iPad that will access information from the server. I do not want to purchase a monitor and keyboard as the unit will sit in a cupboard out of sight. Can I pair my macair to it for when I need to perform updates and maintenance ?

    I have a 2010 Mac Mini running Yosemite and Server which I use
    as a headless home server.
    I have is set up to allow screen sharing and can connect to it and
    control it with my iMac, Macbook Pro, iPhone, and a 2011 Mini Server
    that I use as an HTPC.
    You can check this out for all the Yosemite Server capabilities:
    https://help.apple.com/advancedserveradmin/mac/4.0/
    I have iTunes Home Sharing set up on it and have my entire iTunes
    library on it.  I can then use any of my Macs to play Movies or Songs
    from it and only keep locally a select subset of that on my individual
    devices.
    Rather than and update server, I utilize Server's Caching Service.  The caching
    server will duplicate any update download (system or MacApp Store purchases)
    any time a device that is connected to my network down loads one.  The update will
    then be stored locally and all other devices will download the update from it which
    can be faster than from Apple directly.  This has the advantage of only having to download
    once with limited bandwidth internet connections.  There is also an Update Server service
    available, but it is some what more involved in setting up.  However, it will download
    and store all available updates.
    There is another thing as well if you do not care for syncing things like Contacts, Calendar, etc.
    to iCloud, you can set Server up to sync these items across devices locally.

Maybe you are looking for

  • How do I setup Forms not to ask RAD username/password when opening a form

    Good day I have setup oid and sso and they work I can sign on to database with an oid user using sqlplus. If I set SsoDynamicResourceCreate=true and enter the user id and password in at the popup it works correct and won't even ask it again What I wa

  • My ipod isn't recognized by itunes

    My ipod isn't being recognized by my itunes account. Every time I plug in my Ipod, nothing happens. My ipod doesn't have the connected screen and doesn't charge, and my computer basically doesn't acknowledge its existence at all. I've tried restartin

  • 500 Mailing labels of 1 record. How to achieve this in indesign?

    Hello, How would you create 500 mailing labels of 1 record in indesign? Im new to indesign and would be interested to learn. Many thanks in advance

  • Quick printing

    How can i print a report quickly like printing from DOS on Dot-Matrix printer within Oracle reports 6i? please tell me in detail

  • JPEG and White Balance

    When Aperture imports JPEGs it offers the same white balance options as it does for RAW files. My understandiing from using Lightroom which does not use temperature in it's white balance Develop module for JPEGs, is that there is no data associated w