Status display in monitor

Hi experts,
In the consolidation monitor, I've got consolidation group hierarchy (company) called H1, and bellow all companies.
When I execute the function of data collection at the consolidation group level (H1) in the update mode, it executes the function for all companies, and even though some companies may not have the data, the status of all companies is the same: without errors, but with warnings.
It's hard to manage the consolidation process because I can't track which companies have submmitted the data and which haven't submitted, I mean visually in the monitor.
My question is: Is the status in the monitor workind correctly, and how can I track by task each company status?
Thanks in advance,
Edited by: Beatriz Fitzgibbon on Sep 5, 2008 11:50 AM

Yes the status is updated correctly. The wya to determine whether or the data has been collected is to have a task subsequent to the data collection for a validation to check this.

Similar Messages

Agent has disabled full monitoring of this target. Only target Status is being monitored.

The following warning is displayed when going through the following:
Database instance (target type)
Oracle Database > Monitoring > All Metrics
"Agent has disabled full monitoring of this target. Only target Status is being monitored."
Triggered by the following:
Summary
Due to 5 hung threads, the target is having all collections disabled
Internal Event Name
CollectionsDisabled:HungThreads
Event Type
Target Monitoring Disruption
Category
Unclassified
Following actions executed to attempt resolution:
+ Database has been bounced, error is resolved
+ Clearstate agent
+ re-enable all collections manually: Metric and Collection Settings > collection schedule column; enable
+ Bounce agent
OMS Version: 12.1.0.4.0
Agent Version: 12.1.0.4.0
Anybody have any ideas on how to clear this error?

emctl clearstate agent TARGETNAME,TARGETTYPE
emctl status agent scheduler
emctl status agent target <Instance_name>,oracle_database
emctl status agent dbconnections
Try to colelct the particulare metric
emctl control agent runCollection TARGETNAME:TARGETTYPE COLLECTIONITEM
Finally, Observer the error message any on the log
agent_inst/sysman/log/gcagent.log

HT3382 Connect from a MacBook Pro's mini display port to a Display Port monitor?

Hello everyone,
Is it possible to connect from a MacBook Pro's mini display port to a Display Port monitor with resolutions higher than 1920 x 1200? It seems Apple does not supply a mini-DP to DP adapter.
However, just as they do not make a mini-DP to HDMI adapter, but they do recommend a Belkin product for this purpose.
Is there any reason that a mini-DP to DP adapter or cable wouldn't work and support high resolutions?
Thanks for your feedback!

danz0r wrote:
Hey tjk,
Thanks for the response.
Do you have any recommendations for a potential set up? The audio output and Apple DVI are on different sides of my MBP, which is alright, I guess I can get two long cables to handle each. I was hoping to just have my MBP closer to where I use it, with a cord nearby plugged in on one side to the HDTV and resting near where I keep my MBP for when I want to use the HDTV as an external monitor.
With a converter like this, you can run video out of the MBP's DVI port, and miniToslink (optical) audio out of the 3.5mm stereo mini jack to the converter, then it will combine the two and output audio and video through HDMI to the monitor.
http://www.supermediastore.com/product/u/apogee-dvi-to-hdmi-converter-spdif-opti cal-toslink-coaxial-input-output?utm_source=cj&utm_medium=aff&utm_content=HDMI+A ccessories
Otherwise, depending on the TV's inputs, for video you could run DVI to DVI on the TV, or DVI to HDMI to the TV. For audio you could run 3.5mm stereo mini plug from the MBP to RCA adapter on the TV. Toslink/optical is also an option.

Daisy chain two display port monitors (Dell U2913WM) to new Mac mini Thunderbolt?

Everything I read said that I could hook up a display port monitor to a Thunderbolt port on the mac mini. I purchased two display port monitors (Dell U2913WM) that can be daisy chained, and hooked them up. All I get is mirroring. Does anyone know how to turn off mirroring with this setup? I did not get the "uncheck mirroring" option in preferences until I hooked up the second via the HDMI port instead of a daisy chain. The problem with that is, I cannot take advantage of the full resolution through the HDMI. It seems I have wasted my money on two monitors.
Looking for advice on:
1) How to daisy chain these two Dell monitors to the mac mini and turn off mirroring and use an extended desktop, or
2) How to take advantage of the full resolution through HDMI port?
Any help would be greatly appreciated.
Thanks!

So re-reading this thread, I now realize you did exactly what I wanted to do but your issue was having a cloned vs. extended desktop. Oops!
I believe your "nothing plugged in" issue is the cable. I'm not sure that TB cables are backwards compatible with DP - I think it's only the ports. Do you see multiple monitors in "System Preferences > Displays" if you hook the monitors up like you described in your OP?
My Dell U2713H arrived today and it works like a charm with the supplied Mini-DP to DP cable. The built-in display on my 13" mid 2009 MBP still works if not in clamshell mode, although I will mostly use mine in my HengeDock. In the OSD of the monitor, you can access "Display Settings > Display Info" and it will show you the DP capability. Mine is only DP 1.1a and I believe to run 2 of these at full resolution you will need the bandwidth in DP 1.2 which includes MST (daisy-chaining). This could be your problem.
Can you access the same menu in your OSD and report back what your DP compatability is?
Thanks!
mgb

Stuck in To Be Delivered Status in Message Monitoring - Adapter Engine

Hi,
I have messages stuck in To Be Delivered status in Messages Monitoring. When i checked the Audito Logs, there are NO LOGS. I resent the message and now the logs indicated in the Audit Logs is:
2014-03-26 08:39:10
Information
The message was successfully received by the messaging system. Protocol: XI URL: http://<host>:<port>/MessagingSystem/receive/AFW/XI Credential (User): PIIXXXX
2014-03-26 08:39:10
Information
Using connection SOAP_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2014-03-26 08:39:10
Information
Message successfully put into the queue.
2014-03-26 08:52:48
Information
Admin action: Trying to redeliver message.
The connection between the receiver is ok, does this have something to do with the Communication Channels?
Please help.
thank you.

Hi Eng Swee,
there are messages that were cancelled yesterday and the status is 'Terminated With Errors'
this is what is indicated in the Audit Logs
2014-03-26 02:38:47
Information
Admin action: Trying to fail message.
2014-03-26 02:38:47
Error
The message status was set to FAIL.
2014-03-26 02:38:47
Information
Admin action: The message was successfully set to status failed.
2014-03-26 02:38:47
Error
Asynchronous error detected: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Message failed by admin.. Trying to report it.
2014-03-26 02:38:47
Error
Asynchronous error reported.
Is this the reason why the messages are stuck?
thank you!

To Be delivered status in Message monitoring

Hi,
There are some messages in TO BE DELIVERED status in Message monitoring while selecting integration server. I could neither cancel nor resend.
any input reg. this will be appreciated.
I didn't see any messages with TO BE delivered status in adapater engine.
I could able to clear What ever messages in system error status in adapter engine by filtering based on sequential id.
I have seen this thread & link also.
To Be Delivered
Re: "To be delivered" status in RWB -- Any solution?
http://help.sap.com/saphelp_nw04/helpdata/EN/49/e3fb40ef74f823e10000000a155106/content.htm
I could not see any entry in SMQ1, SMQ2, SM58 also
Thanks
Praba
Edited by: Prabaharan Rangasamy on Dec 8, 2009 1:02 PM
Edited by: Prabaharan Rangasamy on Dec 8, 2009 1:04 PM

Hi,
You cannot resend or cancell the messages which are in status "To Be Delivered". Check Receiver adapter File/Jdbc/ OFTP e.t.c. which is processing these messages.
Check with your Basis team to remove the lock of adapters if any. Or to process these messages you require soft restart of Java stack.
I had same kind of issue two days back with OFTP adapter messages and did soft restart of java stack with help of Basis team.
Hope it will helps you
Cheers
Veera

A1081 Cinema Display LCD Monitor compatibility

I am about to buy a reconditioned A1081 Cinema Display LCD Monitor 20"? But i need to know if it will work with my MacBook Pro 10.5.8 and my ipad 2? As i am buying it to use at an exhibition. iIf so what adaptor will i need to hook both of these up? Thank you in advance.

Are you sure the monitor is set to receive input over the VGA input? Have you tried the DVI input on the monitor? You may have better luck with DVI.

Video input/ iMac display as monitor

Hello everybody,
I have got a feature request for future releases of the iMac series. I think I would not be the only one appreciating a solution to use an iMac's display as monitor for other computing devices such as the Mac mini or older PC-hardware. In my opinion this video input would not have to be more than another little port at the back of an iMac. This could be solved with a mini-port like it is now with the mini-DVI.
When trying to find a way to use my iMac that way I only found this vnc solution which requires a network connection between both devices but I also found many posts asking for a solution like my proposal.
Please let me know what you think of it! Thanks in advance!

It's not that easy. Providing a direct input to the monitor would require quite a bit of additional circuitry. I think that the cost of providing such in input would be unjustifiable when considering the small percentage of iMac buyers who would use such a feature. But you can suggest it to Apple here:
http://www.apple.com/feedback/imac.html
For a workaround, perhaps Screen Recycler would work for you.

How do I display external monitor as sole display, rather than mirroring, with lid open?

How do I display external monitor as sole display, rather than mirroring, with lid open?

sudo nvram boot-args="iog=0x0" restart to take effect

Question:managed server status display unknown ??

platform: AS5 weblogic8.16 cluter
when managed server startup,status ok,but after some days,managed server status is unknown or shutdown in console web
I check process "ps -ef|grep java" managed server process exit
and application on managed server is ok
this is log in domain.log
####<2009-9-9 <Warning> <Management> <web3> <myserver> <ExecuteThread: '1' for queue: 'weblogic.kernel.System'> <<WLS Kernel>> <BEA-141138> <Managed Server web03 is disconnected from the admin server. This may be either due to a managed server getting temporarily partitioned or the managed server process exiting.>
after restart managed server ,status running
so why managed server status display unknown/shutdown after some days?? how can i solve this problem??

Status unknown means that node manager can't establish contact with the mgd server. If your server is dropping out of the cluster, that would result in Unknown.
Your server could be dropping out of the cluster for many, many reasons. If it is always the same server dropping out, that points to a particular node in your cluster.

POA Status screen in Monitor

GW8 patched--On the POA status screen in Monitor, can anyone tell me what
"Unsuccessful Document Conversion" refers to in the Statistics section?
There is a count of 111 in there right now on our stats... (almost 15000
for Successful Documents Conversion). I assume it has something to do with
the DMS docs of which we have thousands, but what conversions are
unsuccessful -- what would I look for in the logs or what user complaints
would result? I am getting random odd user complaints lately. Thanks in
advance.

Thanks Massimo--after posting I saw some documentation about pdf docs and
conversion--guess those 111 attachments would not show up in search results
then either.
"Massimo Rosen" wrote in message
news:g44Ur.2822$[email protected]..
On 07.08.2012 00:36, PatM wrote:
> GW8 patched--On the POA status screen in Monitor, can anyone tell me
> what "Unsuccessful Document Conversion" refers to in the Statistics
> section? There is a count of 111 in there right now on our stats...
> (almost 15000 for Successful Documents Conversion). I assume it has
> something to do with the DMS docs of which we have thousands, but what
> conversions are unsuccessful -- what would I look for in the logs or
> what user complaints would result? I am getting random odd user
> complaints lately. Thanks in advance.
This has nothing to do with DMS. Unsuccesful conversions occur when the
indexer attempts to index attachments to mails, but fails to. Nothing to
worry about.
CU,
Massimo Rosen
Novell Knowledge Partner
No emails please!
http://www.cfc-it.de

Cons Group & Unit Display in Monitor

With the upgrade to EP3 the cons groups and units name displayed in the monitor are the short description instead of the long description as was previously the case.
It would be most appreciated if you would please suggest ways to change the names display from the short description to the long description.

HI Dan,
The display in Monitor works on standard future, and there is no customization involed in that as of now to display wither Short or Long description.
Else, you can keep the short description as same as Long description, I know this may not solve your problem if the length of Long Description is grater than short.
Also try contacting OSS help...
or in R/3 normally if we want any changes in the standard display, we will do the by copying the standard and make changes. So try using ABAP help, creating Own transaction code by copying the standard "UCMON" and apply necessary changes.
Give this as last preference, as this includes only technical work.

I have an Apple Cin HD Display 23" monitor, purchased in 2006. I use it with a old PC (2007) running Win XP. Works fine. Can this monitor be used with a new PC with Intel 4th gen i5 processor, running Win 8.1?

I have an Apple Cin HD Display 23" monitor (part no. M9178LL/A), purchased in 2006. I use it with an old PC (2007) running Windows XP. Works fine. Can this monitor be used with a new PC with Intel 4th gen i5 or i7 processor, running Win 8.1?

I have an Apple Cin HD Display 23" monitor (part no. M9178LL/A), purchased in 2006. I use it with an old PC (2007) running Windows XP. Works fine. Can this monitor be used with a new PC with Intel 4th gen i5 or i7 processor, running Win 8.1?

Processor fan was producing lot of noise and nothing was displaying in monitor

hi
recently my call manager was not working.
while it was switching on the processor was continiously producing lot of noise
and t was not displaying nothing on monitor.
no changes was made after sucessfull running from last 5 mnths.
can any one clarify what is the problem.
thanks
regards
praveen kumar gvk

hi
thanks for rply
i am having ibm server, model is 7825, the server was noot booting, nothing was displaying in monitor.
1. serever power on but it was not load into the os.
2. pci riser was installed. there is no saparate video slot.
3. monitor was connected to standard vga.
4. in the server bmc heart beat led blinking, standby power led, sas/sata controller power led is glowing.
5. hard disk drive activity led is glowing continuously.
the problem is server is not booting. nothing was displaying in monotor. all the fans are working fine. i had tried each fan they are all working. i also try to boot with single ram. but the server was not booting.

X-rite eye-one display 2 monitor calibration and new 27' iMac

Hi,
I have been looking at the new 27" iMac to replace a 24" iMac Intel core 2 duo that I purchased last spring. The main problem being that I am a photographer/graphic designer and found out after I purchased this iMac that my x-rite eye-one display 2 monitor calibration system was rendered useless because the monitor brightness was way out of range (too bright) for the calibration software to work correctly.
My question is: Has anyone tried to use the x-rite eye-one display 2 with the new iMac 27" monitor? I understand that they may have fixed the monitor brightness problem, but now the new screen is lit by LED instead of LCD. Has this just presented a NEW problem that makes this color calibration system still useless or does it work despite the fact that the monitor light source has changed?
Thanks in advance for any info you can provide

The x-rite i1 display 2 won't work with any LCD lit panels. I've attended a x-rite training only six weeks ago and the guy explained the issues. So if you want to calibrate any LCD backlit screen, you have to get a more expensive thing -- maybe the Colormunki will do, but for sure the i1Pro will work. It's still a quite expensive upgrade.

Status display in monitor

Similar Messages

Maybe you are looking for