Status Ended while starting all tasks in Management Console
Hai All,
While performinig Start operation for all the tasks in Management Console, status is turned to Ended for all 14 Tasks. Please guide me to clear the problem.
Thanks in advance...
Hai Mahesh,
Thanks for your instant reply..
I checked as you advised. Actually i found some log details in dev_coll file.In that last line its saying that dev_proc Fopen() function is not working.Also its asking to check that the file is present or not.
I too checked in the PRFCLOG folder, but its not available..
Kindly help me out to resolve this issue..
Thanks & Regards,
Kumar
Similar Messages
-
Hi there
Patch Tuesday yesterday (10th June2014). As always we deploy new patches first to a test collection where Windows 7 updates automatically apply.
Upon trying to rebuild any of the machines in this test collection, we were presented with the following error message:
Failed to run task sequence. Error occurred while starting the task sequence (0x8007000E)
After searching about this, I found this page from Niall Brady, which explained the problem:
http://www.niallbrady.com/2013/05/17/after-selecting-a-task-sequence-in-configuration-manager-2012-sp1-you-receive-threadtoresolveandexecutetasksequence-failed-code0x8007000e-in-smsts-log/
So I removed some of the machines from the test Windows update collection, and as per the advice in the above link, the error was gone and those machines could be built successfully.
So the problem is there were too many many policies downloaded (apps, packages and most of all updates) for the task sequence ram to store, hence the error.
Now...
...I have a question.
The next logical step to my mind is to patch our OS image with all missing patches, so these do not have to be downloaded at build time. Niall mentions this as one of the resolutions to this issue.
However there seems to be some confusion over whether this would actually make a difference.
I read through this link:
http://social.technet.microsoft.com/Forums/en-US/7e597b44-2586-4063-b6d0-cec48a7c11c7/sccm-2012-task-sequence-failure-0x8007000e?forum=configmanagerosd
There's seems to be no consensus on this.
Is SCCM 2012 clever enough to - when the task sequence is first started - to download ONLY the updates (policies) it detects as NOT present in the OS image...
or
Will it simply try to download policies for ALL items deployed to it, whether the updates are present in the OS image or not?
I will be disappointed if SCCM 2012 SP1 CU2 isn't clever enough to only download policies at build time for the apps, packages and updates it detects as needed.
I'd be grateful for some clarity on this.
Regards,
John, Glasgow.Hi Jason
Thank you for replying, I appreciate it.
1) We currently have 15 or 16 software update groups for Office updates, dating back a month or two. The latest software update group contains all the patches in the previous software update groups plus the patches released on 10th June. Do you recommend
deleting all but the latest software update group?
2) I'm almost reluctant to ask this, but based on what you have advised, is it the case that when the task sequence executes, it will download policies for each update in each software update group regardless of whether it has already downloaded a policy
for an update in a previous software update group? So in effect it's downloading policies (for updates) it has already downloaded?
3) I'm not clear on why there would be no policy for an image; in Niall Brady's informative page on the 8007000E error, he writes the following:
"The reason it has run of space could be due to four possibilites: too many applications, too many Windows updates, too many Task Sequence steps, too many referenced packages'.
Can you shed some light on why there isn't a policy for an image?
Thanks again for replying,
John. -
Failed to run Task Sequence.
An error occurred while starting the task sequence (0x8007000E)."
While OSD, picks up task sequence but fails in resolving task sequence dependencies. SMSPXE identifies device is not in database (unknown).
SMSTS.log shows
ThreadToResolveAndExecuteTaskSequence failed. Code(0x8007000E)" in SMSTS.LOG, have seen other articles suggesting failure due to lack of storage (RAM) but this task sequence has worked in past.
By the way, if I create a stand alone media, we are able to image the workstation. What has changed in the task sequence such that the workstation is unable to download policies due to lack of storage (RAM) on workstation. Workstation has 2 GB of RAM.I have found a work around for the issue, even though the computer is unknown, there were software updates targeted to the ALL SYSTEMS collection which applies to All Unknown Computers and therefore to x64 Unknown Computer and x86 Unknown Computer.
We had a SCEP ADR applying definition updates to All Systems, we applied the ADR to a different collection, removed all the SCEP updates to All Systems and successfully re-imaged the workstation. Following article was of great help in identifying the problem
after-selecting-a-task-sequence-in-configuration-manager-2012-sp1-you-receive-threadtoresolveandexecutetasksequence-failed-code0x8007000e-in-smsts-log
Thanks Gerry for your assistance. -
ERROR WHILE STARTING SERVICE AT ENTERPRISE MANAGEMENT IN OBIEE11G
Hi,
I am facing error while uploading RPD in to Enterprise Management.
When starting Services iam able to start all except "BISERVICES". It is showing 80% success and 20% failed.
By seeing the error iam able to find it is problem with server.
Can any help in this regard.
Below is the error iam facing.
Message ID EM-02694
Message Level 1
dcid 63595f90fef1a08d:515de89f:1345a56bb43:-8000-00000000000014af
Relationship ID 1:19282
Argument 1 BI_INSTANCE:coreapplication;FAILED_TO_START;Error in starting one or more components of BI Instance; Please check the server log files for detailed message.
Component AdminServer
Module oracle.sysman.emai.view.bi.impl.ProgressDialogHelper
Host test.transsys.com
Host IP Address 192.168.1.5
User weblogic
Thread ID Thread-1915
ECID 0000JI2wDyvFg4WFLzuHOA1Ew3RC000104
Message Supplementary information regarding operation: BI_INSTANCE:coreapplication;FAILED_TO_START;Error in starting one or more components of BI Instance; Please check the server log files for detailed message.Hi ,
THANKS FOR UR RESPONSE
Iam not able to stat r stop the services( IAM NEW TO OBIEE11G)
Iam getting following error
RCV: Permission denied
Communication error with the OPMN server local port.
Check the OPMN log files
/software/Middleware/Oracle_BI1/opmn/bin/opmn: unexpected exit: code 512
opmnctl start: opmn failed to start.
this is what my opmn log file shows
[2011-12-28T11:56:16][opmn][NOTIFICATION:1][90][OPMN]ONS server initiated
[2011-12-28T11:56:16][opmn][NOTIFICATION:1][522][OPMN][code:pm-internal]PM state directory exists: /software/Middleware/instances/instance1/config/OPMN/opmn/states
[2011-12-28T11:56:16][opmn][NOTIFICATION:1][675][OPMN][code:pm-internal]OPMN server ready. Request handling enabled.
[2011-12-28T11:56:16][opmn][ERROR:1][17][OPMN][code:ons-listener]127.0.0.1,9502: BIND (Address already in use) -
DS XI3.2 SP1 - Problem when starting RFC server from management console
Hi,
We're using DataServices XI 3.2 SP1 FP1 on a windows 2008 server 64bits to load SAP BW. We have set up an external system in SAP BW called "DI_SOURCE" and then successfully created a RFC server interface (DI_SOURCE) within the management console.
When we try to start this RFC server from the management console, we immediately get the following error message : "An internal error occurred in: server.start()::rfc_bad_connection".
On the other hand, when we follow the "old method" (pre SP2) and start the RFC server from a command window, it works : we have "CONNECTION DI_SOURCE OK" in SAP BW.
Any ideas how to solve this ?
Thanks,
OlivierHi,
We have tried your suggestions above.
Instead of just crashing we now get an error from designer (before closing down). Seems as if our librfc32.dll has a problem.
We have verified that the librfc32.dll from the Data Services package is the only one on the server.
Problem signature:
Problem Event Name: BEX
Application Name: al_designer.exe
Application Version: 12.2.2.0
Application Timestamp: 4b99c5ef
Fault Module Name: LIBRFC32.DLL
Fault Module Version: 7100.3.144.6097
Fault Module Timestamp: 49bec8be
Exception Offset: 000179a4
Exception Code: c0000409
Exception Data: 00000000
OS Version: 6.1.7600.2.0.0.272.7
Locale ID: 1030
Additional Information 1: 4b85
Additional Information 2: 4b85a4b06dde50b4e092d24f447efca0
Additional Information 3: 45fe
Additional Information 4: 45feda9db76a48384005c14dafbddc29
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt -
Hi All,
I had installed P6 8.3 with weblogic 10.3.6.
My Adminserver is running.
But when i am starting my managed server P6, P6 server is getting started but P6 application is failing to start and giving above error.
but my p6help web application is showing Active state.
I added below line in startWeblogic.cmd and setDomainEnv.cmd file but no use.
set JAVA_OPTIONS=%JAVA_OPTIONS% -Dprimavera.bootstrap.home=C:\P6EPPM_1\p6\
I tried by redeploying p6 application but still same error.
Please help.Hi,
I has set the classpath as well same as above.
If i start managed server manually or using start_primavera.bat, P6 application is becomeing acive and working.
But if i start managed server using windows service, Managed server is get started, p6help is also becoming active but only p6 is failing to start.
If i chek the log it is showing same log below,
[Wed Oct 30 16:08:53 2013] [I] [RunJavaApp] Locating method "public static void main([]String)" in main class
[Wed Oct 30 16:08:53 2013] [I] [RunJavaApp] Building arguments for main class
[Wed Oct 30 16:08:53 2013] [I] [RunJavaApp] Invoking main class
<Oct 30, 2013 4:08:54 PM IST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Oct 30, 2013 4:08:54 PM IST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Oct 30, 2013 4:08:54 PM IST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.45-b01 from Sun Microsystems Inc.>
<Oct 30, 2013 4:08:55 PM IST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
<Oct 30, 2013 4:08:56 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Oct 30, 2013 4:08:56 PM IST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Oct 30, 2013 4:08:56 PM IST> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\Primavera\servers\P6\logs\P6.log is opened. All server side log events will be written to this file.>
<Oct 30, 2013 4:08:57 PM IST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Oct 30, 2013 4:08:59 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Oct 30, 2013 4:08:59 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Oct 30, 2013 4:09:00 PM IST> <Warning> <HTTP> <BEA-101377> <Filtering class loader configuration ignored for web module p6.war of application p6>
Oct 30, 2013 4:09:03 PM com.sun.faces.config.ConfigureListener contextInitialized
INFO: Initializing JavaServer Faces implementation (1_2_07-b03-FCS) for context '/p6'
- Refreshing com.primavera.bre.SystemApplicationContext@7fc4fe21: display name [com.primavera.bre.SystemApplicationContext@7fc4fe21]; startup date [Wed Oct 30 16:09:05 IST 2013]; root of context hierarchy
- Loading XML bean definitions from class path resource [/com/primavera/pvweb/servlet/webconf.xml]
- Bean factory for application context [com.primavera.bre.SystemApplicationContext@7fc4fe21]: org.springframework.beans.factory.support.DefaultListableBeanFactory@35f5e42b
- Pre-instantiating singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@35f5e42b: defining beans [metaConfigProvider,settingsManager,adminManager,LogMgr,performanceManager,threadPool,remoteQManager,subSystemInitializer,sqlConnectionPoolManager,registryService,tracer,mailService,configDumpHelper,autoConfigCollectionTask,proxiedUrlOpener,systemFacade,autoStarterService]; root of factory hierarchy
System property 'primavera.bootstrap.home' not found
<Oct 30, 2013 4:09:07 PM IST> <Warning> <HTTP> <BEA-101162> <User defined listener com.primavera.pvweb.listeners.PVContextListener failed: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'registryService' defined in class path resource [/com/primavera/pvweb/servlet/webconf.xml]: Invocation of init method failed; nested exception is com.primavera.common.exceptions.InvalidBootstrapException: System property 'primavera.bootstrap.home' not found.
org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'registryService' defined in class path resource [/com/primavera/pvweb/servlet/webconf.xml]: Invocation of init method failed; nested exception is com.primavera.common.exceptions.InvalidBootstrapException: System property 'primavera.bootstrap.home' not found
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1338)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:473)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBeanFactory.java:409)
at java.security.AccessController.doPrivileged(Native Method)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
Truncated. see log file for complete stacktrace
Caused By: com.primavera.common.exceptions.InvalidBootstrapException: System property 'primavera.bootstrap.home' not found
at com.primavera.common.BootstrapHome.get(Unknown Source)
at com.primavera.infr.admin.MetaCfg.a(Unknown Source)
at com.primavera.infr.admin.MetaCfg.getMetaJDBCURL(Unknown Source)
at com.primavera.infr.srvcs.RegistryServiceImpl.init(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Truncated. see log file for complete stacktrace -
Reg: Exception while starting one of my managed servers in WL8.1
Hi,
We have two managed servers in our application.
Among them, ManagedServer2 is behaving in a puzzling way.
Sometimes its getting started up without any problem. But sometimes its throwing me the exception "weblogic.rjvm.PeerGoneException:". Iam also attaching the error log herewith.
The WebLogic Server did not start up properly.
weblogic.rjvm.PeerGoneException: ; nested exception is:
weblogic.utils.net.SocketResetException - with nested exception:
[java.net.SocketException: Connection reset]
at weblogic.rjvm.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:108)
at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:137)
at weblogic.management.internal.AdminMBeanHomeImpl_814_WLStub.registerConfigMBeansForAdminChanges(Unknown Source)
at weblogic.management.internal.RemoteMBeanServerImpl.registerAllConfigMBeansForAdminChanges(RemoteMBeanServerImpl.java:532)
at weblogic.management.service.ManagedServerNotificationService.initialize(ManagedServerNotificationService.java:55)
at weblogic.t3.srvr.SubsystemManager.initialize(SubsystemManager.java:118)
at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:895)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:670)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:344)
at weblogic.Server.main(Server.java:32)
Caused by: weblogic.utils.net.SocketResetException - with nested exception:
[java.net.SocketException: Connection reset]
at weblogic.socket.SocketMuxer.readReadySocketOnce(SocketMuxer.java:709)
at weblogic.socket.SocketMuxer.readReadySocket(SocketMuxer.java:648)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:123)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:32)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
--------------- nested within: ------------------
weblogic.rmi.extensions.RemoteRuntimeException: Unexpected Exception - with nested exception:
[weblogic.rjvm.PeerGoneException: ; nested exception is:
weblogic.utils.net.SocketResetException - with nested exception:
[java.net.SocketException: Connection reset]]
at weblogic.management.internal.AdminMBeanHomeImpl_814_WLStub.registerConfigMBeansForAdminChanges(Unknown Source)
at weblogic.management.internal.RemoteMBeanServerImpl.registerAllConfigMBeansForAdminChanges(RemoteMBeanServerImpl.java:532)
at weblogic.management.service.ManagedServerNotificationService.initialize(ManagedServerNotificationService.java:55)
at weblogic.t3.srvr.SubsystemManager.initialize(SubsystemManager.java:118)
at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:895)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:670)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:344)
at weblogic.Server.main(Server.java:32)
Reason: weblogic.rmi.extensions.RemoteRuntimeException: Unexpected Exception - with nested exception:
[weblogic.rjvm.PeerGoneException: ; nested exception is:
weblogic.utils.net.SocketResetException - with nested exception:
[java.net.SocketException: Connection reset]]
I need help/advice from somebody for this.
Thanks in advance.Hi Qumar,
Many thanks on this. But when i checked the connection status of the Admin box, i could see it in the alive status.
Can you advice me that how should i be checking the connectivity between the boxes?
But this problem is happening sometimes only. Sometimes the Managed2 server restart is successful.
thanks,
Padma. -
Error while starting OIM admin and design console
Hi all,
I have OIM 9.10.2 deployed on Jboss 4.2.3GA with oracle 10g as database.Installation was successfull and after that we tried some simple use cases on that.
This time after starting Jboss it gave an error "Network Adapter cannot be connected".
It came because RMI port was in use and because of the change in IP Address,we changed both of them.
changed RMI port in jboss-service.xml
changed IP address to Host name in xlconfig.xml,jboss.profile.xml and xell-ds.xml files
But now when we run server and try to access the consoles we get the following errors -
Admin console error - OIM admin page opens stating the error "System error was encountered"
Design console error - Oracle Identity Manager Design console could not allow you log in
Diagnostic dashboard error - Invalid username or password ( i m sure of the id and pwd )
Jboss logs -
2010-10-22 16:30:10,986 WARN [XELLERATE.DATABASE] Trying to get the connection count : 3
2010-10-22 16:30:10,986 WARN [org.jboss.resource.connectionmanager.JBossManagedConnectionPool] Throwable while attempting to get a new connection: null
org.jboss.resource.JBossResourceException: Could not create connection; - nested throwable: (java.sql.SQLRecoverableException: Io exception: The Network Adapter could not establish the connection)
2010-10-22 16:30:10,986 WARN [XELLERATE.DATABASE] Trying to get the connection count : 4
2010-10-22 16:30:10,986 ERROR [XELLERATE.DATABASE] Class/Method: DirectDB/getConnection encounter some problems: Error while retrieving database connection.Please check for the follwoing
Database srever is running.
Datasource configuration settings are correct.
2010-10-22 16:30:10,986 ERROR [XELLERATE.DATABASE] Class/Method: tcServerProperties/initServerProperties encounter some problems: {1}
java.lang.NullPointerException
at com.thortech.xl.dataaccess.util.tcServerProperties.<init>(Unknown Source)
16:30:10,986 ERROR [XIMDD] Class/Method: UserVerificationServlet/loginUser encounter some problems: RuntimeException; nested exception is:
java.lang.NullPointerException
Thor.API.Exceptions.tcAPIException: RuntimeException; nested exception is:
java.lang.NullPointerException
at Thor.API.tcUtilityFactory.getPropertyValue(Unknown Source)
at Thor.API.tcUtilityFactory.<init>(Unknown Source)
at com.thortech.xl.systemverification.webapp.UserVerificationServlet.log
inUser(Unknown Source)
Please suggest what might be the change that affected our OIM instance and how can we solve this problem.
Thanks,
DeepikaHi Sunny,
I checked both the files you mentioned both of them are correct.Changed the RMI port in jboss-service.xml to its original value.Still I am facing the same error :(
2010-10-27 10:40:56,821 WARN [XELLERATE.DATABASE] Trying to get the connection count : 1
2010-10-27 10:40:56,837 WARN [org.jboss.resource.connectionmanager.JBossManagedConnectionPool] Throwable while attempting to get a new connection: null
org.jboss.resource.JBossResourceException: Could not create connection; - nested throwable: (java.sql.SQLRecoverableException: Io exception: The Network Adapter could not establish the connection)
at org.jboss.resource.adapter.jdbc.xa.XAManagedConnectionFactory.createManagedConnection(XAManagedConnectionFactory.java:155)
at org.jboss.resource.connectionmanager.InternalManagedConnectionPool.createConnectionEventListener(InternalManagedConnectionPool.java:619)
at org.jboss.resource.connectionmanager.InternalManagedConnectionPool.getConnection(InternalManagedConnectionPool.java:264)
at org.jboss.resource.connectionmanager.JBossManagedConnectionPool$BasePool.getConnection(JBossManagedConnectionPool.java:613)
at org.jboss.resource.connectionmanager.BaseConnectionManager2.getManagedConnection(BaseConnectionManager2.java:347)
at org.jboss.resource.connectionmanager.TxConnectionManager.getManagedConnection(TxConnectionManager.java:330)
at org.jboss.resource.connectionmanager.BaseConnectionManager2.allocateConnection(BaseConnectionManager2.java:402)
at org.jboss.resource.connectionmanager.BaseConnectionManager2$ConnectionManagerProxy.allocateConnection(BaseConnectionManager2.java:849)
2010-10-27 10:40:56,837 ERROR [XELLERATE.DATABASE] Class/Method: DirectDB/getConnection encounter some problems: Error while retrieving database connection.Please check for the follwoing
Database srever is running.
Datasource configuration settings are correct.
2010-10-27 10:40:56,852 ERROR [XELLERATE.WEBAPP] Class/Method: tcWebAppSettingsAction/execute encounter some problems: RuntimeException; nested exception is:
java.lang.NullPointerException
Thor.API.Exceptions.tcAPIException: RuntimeException; nested exception is:
java.lang.NullPointerException
at Thor.API.tcUtilityFactory.getPropertyValue(Unknown Source)
-Deepika -
Adoacorectl.sh : while start exiting wth status 204 ,start exit with 150
Hi ,
adoacorectl.sh adformsctl.sh adoafmctl.sh: adcmctl.sh
Above four scripts are exiting with status 204 while starting and status 150 while starting
All of the error log files for above are showing belwo informatin
Error log file :
*12/18/10-23:18:18 :: adoacorectl.sh: Stopping OPMN managed OACORE OC4J instance*
opmnctl: stopping opmn managed processes...
*================================================================================*
opmn id=oracle.microexcelhyd.com:6263
no processes or applications matched this request
Thanks in advanceError message :
This error (HTTP 500 Internal Server Error) means that the website you are visiting had a server problem which prevented the webpage from displaying.
Apache error log file :
[Sun Dec 19 00:17:06 2010] [notice] Oracle-Application-Server-10g/10.1.3.4.0 Oracle-HTTP-Server configured -- resuming normal operations
[Sun Dec 19 00:17:06 2010] [notice] Accept mutex: fcntl (Default: fcntl)
[Sun Dec 19 00:26:05 2010] [error] [client 10.10.10.126] [ecid: 1292698565:10.10.10.224:6446:0:6,0] mod_oc4j: Failed to find a failover oc4j process for session request for destination: application://oacore (no island or jgroup).
[Sun Dec 19 00:34:05 2010] [error] [client 10.10.10.126] [ecid: 1292699045:10.10.10.224:6446:0:10,0] mod_oc4j: Failed to find a failover oc4j process for session request for destination: application://oacore (no island or jgroup).
Adstral.log file
You are running adstrtal.sh version 120.15
The logfile for this session is located at /u01/MEV1211/inst/apps/MEV1211_oracle /logs/appl/admin/log/adstrtal.log
Executing service control script:
/u01/MEV1211/inst/apps/MEV1211_oracle/admin/scripts/adopmnctl.sh start
script returned:
You are running adopmnctl.sh version 120.6
Starting Oracle Process Manager (OPMN) ...
adopmnctl.sh: exiting with status 0
adopmnctl.sh: check the logfile /u01/MEV1211/inst/apps/MEV1211_oracle/logs/appl/ admin/log/adopmnctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u01/MEV1211/inst/apps/MEV1211_oracle/admin/scripts/adalnctl.sh start
script returned:
adalnctl.sh version 120.3
Checking for FNDFS executable.
Starting listener process APPS_MEV1211.
adalnctl.sh: exiting with status 0
adalnctl.sh: check the logfile /u01/MEV1211/inst/apps/MEV1211_oracle/logs/appl/a dmin/log/adalnctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u01/MEV1211/inst/apps/MEV1211_oracle/admin/scripts/adapcctl.sh start
script returned:
You are running adapcctl.sh version 120.7.12010000.2
Starting OPMN managed Oracle HTTP Server (OHS) instance ...
adapcctl.sh: exiting with status 0
adapcctl.sh: check the logfile /u01/MEV1211/inst/apps/MEV1211_oracle/logs/appl/a dmin/log/adapcctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u01/MEV1211/inst/apps/MEV1211_oracle/admin/scripts/adoacorectl.sh start
script returned:
You are running adoacorectl.sh version 120.13
Starting OPMN managed OACORE OC4J instance ...
adoacorectl.sh: exiting with status 0
adoacorectl.sh: check the logfile /u01/MEV1211/inst/apps/MEV1211_oracle/logs/app l/admin/log/adoacorectl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u01/MEV1211/inst/apps/MEV1211_oracle/admin/scripts/adformsctl.sh start
script returned:
You are running adformsctl.sh version 120.16
Starting OPMN managed FORMS OC4J instance ...
adformsctl.sh: exiting with status 0
adformsctl.sh: check the logfile /u01/MEV1211/inst/apps/MEV1211_oracle/logs/appl /admin/log/adformsctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u01/MEV1211/inst/apps/MEV1211_oracle/admin/scripts/adoafmctl.sh start
script returned:
You are running adoafmctl.sh version 120.8
Starting OPMN managed OAFM OC4J instance ...
adoafmctl.sh: exiting with status 0
adoafmctl.sh: check the logfile /u01/MEV1211/inst/apps/MEV1211_oracle/logs/appl/ admin/log/adoafmctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u01/MEV1211/inst/apps/MEV1211_oracle/admin/scripts/adcmctl.sh start
script returned:
You are running adcmctl.sh version 120.17.12010000.3
Starting concurrent manager for MEV1211 ...
Starting MEV1211_1219@MEV1211 Internal Concurrent Manager
Default printer is noprint
adcmctl.sh: exiting with status 0
adcmctl.sh: check the logfile /u01/MEV1211/inst/apps/MEV1211_oracle/logs/appl/ad min/log/adcmctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u01/MEV1211/inst/apps/MEV1211_oracle/admin/scripts/jtffmctl.sh start
script returned:
You are running jtffmctl.sh version 120.3
Validating Fulfillment patch level via /u01/MEV1211/apps/apps_st/comn/java/class es
Fulfillment patch level validated.
Starting Fulfillment Server for MEV1211 on port 9363 ...
jtffmctl.sh: exiting with status 0
.end std out.
.end err out.
All enabled services for this node are started.
adstrtal.sh: Exiting with status 0
adstrtal.sh: check the logfile /u01/MEV1211/inst/apps/MEV1211_oracle/logs/appl/a dmin/log/adstrtal.log for more information ...
You have new mail in /var/spool/mail/oaebiz
[oaebiz@oracle scripts]$ vi /u01/MEV1211/inst/apps/MEV1211_oracle/logs/appl/a n/log/adstrtal.log
2 files to edit
[oaebiz@oracle scripts]$ vi /u01/MEV1211/inst/apps/MEV1211_oracle/logs/appl/a dmin/log/adstrtal.log
[oaebiz@oracle scripts]$ vi /u01/MEV1211/inst/apps/MEV1211_oracle/logs/appl/admi n/log/adstrtal.log
Executing service control script:
/u01/MEV1211/inst/apps/MEV1211_oracle/admin/scripts/jtffmctl.sh start
Timeout specified in context file: 100 second(s)
script returned:
You are running jtffmctl.sh version 120.3
Validating Fulfillment patch level via /u01/MEV1211/apps/apps_st/comn/java/classes
Fulfillment patch level validated.
Starting Fulfillment Server for MEV1211 on port 9363 ...
jtffmctl.sh: exiting with status 0
.end std out.
.end err out.
[Service Control Execution Report]
The report format is:
<Service Group> <Service> <Script> <Status>
Root Service Enabled
Root Service Oracle Process Manager for MEV1211_oracle adopmnctl.sh Started
Web Entry Point Services Enabled
Web Entry Point Services Oracle HTTP Server MEV1211_oracle adapcctl.sh Started
Web Entry Point Services OracleTNSListenerAPPS_MEV1211_oracle adalnctl.sh Started
Web Application Services Enabled
Web Application Services OACORE OC4J Instance MEV1211_oracle adoacorectl.sh Started
Web Application Services FORMS OC4J Instance MEV1211_oracle adformsctl.sh Started
Web Application Services OAFM OC4J Instance MEV1211_oracle adoafmctl.sh Started
Batch Processing Services Enabled
Batch Processing Services OracleConcMgrMEV1211_oracle adcmctl.sh Started
Batch Processing Services Oracle Fulfillment Server MEV1211_oracle jtffmctl.sh Started
Other Services Disabled
Other Services OracleFormsServer-Forms MEV1211_oracle adformsrvctl.sh Disabled
Other Services Oracle Metrics Client MEV1211_oracle adfmcctl.sh Disabled
Other Services Oracle Metrics Server MEV1211_oracle adfmsctl.sh Disabled
Other Services Oracle MWA Service MEV1211_oracle mwactlwrpr.sh Disabled
ServiceControl is exiting with status 0 -
Solaris 10 management console... login problem!
Hi all!
I have started correctly the solaris management console server using /etc/init.d/init.wbem start.
I have launched the console correctly too (/usr/sbin/smc)
But when I try to access some aministrative tool (such as user management or disk management), it prompts a message asking me for the root password, which I wrote correctly too... but it always returns a "login failed" message...
Any idea??? Anyone else have the same problem???
Thanks.Yes, I have the exact same problem. For me the problem is caused by the fact that solaris management console will not work with blowfish or md5 hashed passwords for root. Since I enabled and created a root password using md5, I cannot use the management console. This is what sun support wrote back to me about this:
PROBLEM SUMMARY :
as root. Root password is rejected. Even when run 'smc' as root user,
asks for root password again and rejects it
SOLUTION :
have found many instances stating blowfish and SMC do not work..I did
find one potential workaround, but it may or may not work.If you want
totry it here is what they suggested..
To use SMC, must disable non-default password algorithm,
Set the CRYPT_DEFAULT line in /etc/security/policy.conf to:
CRYPT_DEFAULT=__unix__
Then delete the SMC users password with passwd -d, then set a new password:
# passwd -d root
passwd: password information changed for root
# passwd root
New Password:
Re-enter new Password:
passwd: password successfully changed for root
Try it on as test box in case it messes up SMC
Other than that it looks like it is not compatible
Odd that the 'most advanced operating system' behaves in this manner. -
BODS Management console : Adapter configuration Error
Hi all,
I have created an custom adapter.But while configuring it in BODS management console it's giving error.
Error :
Could not find element '' in file 'C:\ProgramData\SAP BusinessObjects\Data Services/adapters/install/Custom_adapter.xml'. Error while processing XML configuration files 'C:\ProgramData\SAP BusinessObjects\Data Services/adapters/config/templates/Custom_adapter.xml' or 'C:\ProgramData\SAP BusinessObjects\Data Services/adapters/install/Custom_adapter.xml'.
I am not understanding what is the cause of this error.
Please tell me why this error is coming...
Please help me.Hello,
How did you fix this issue?
I am getting similar issue and not able to understand the reason behind the issue.
Regards,Ashwin -
Solaris Management Console Error
I have installed Solaris 9.0 and I am using Solaris Management Console 2.1. I am trying to change the shell of the 'root' user . When I make the change I get the following error message :
"The management server cannot perform the operation requested
if this problem persists, refer to the log Viewer for additional information and contact your Sun Microsystem support provider.
The actual error reported was:
User root was partially modified. See the error log for further details "
I have seen that the changes requeted( change shell in this case) does actually take place although the SMC complains. Where is the error log and how do I see it ? I fail to understand why this happens. Any help will be appreciated.
I have also noticed that when I make any changed to other users SMC does not complain.
ThanksI have installed Solaris 9.0 and I am using Solaris
Management Console 2.1. I am trying to change the
shell of the 'root' user . When I make the change I
get the following error message :
"The management server cannot perform the operation
requested
if this problem persists, refer to the log Viewer for
additional information and contact your Sun
Microsystem support provider.
The actual error reported was:
User root was partially modified. See the error log
for further details "
I have seen that the changes requeted( change shell in
this case) does actually take place although the SMC
complains. Where is the error log and how do I see it
? I fail to understand why this happens. Any help will
be appreciated.
I have also noticed that when I make any changed to
other users SMC does not complain.
ThanksAdded on 10/23 :
This is a part of the log : /var/sadm/wbem/log/wbem_log
T^L�f\236�:^A�m��fym;^Ulogsvc.wbem.version.1^A�m�_�\236�C��CIMOM@#@2@#@0@#@N/A@#@localhost@#@sun02@#@1066871122857@#@CIM Object Manager Started@#@CIM Object Manager version 2.5.1 build 04/29/03:17:32 started@#@null@#@0@#@0@#@off@#@^A�m�"b�RC^A^ASolaris Management Console Server@#@2@#@0@#@root@#@sun02@#@sun02@#@1066871201263@#@Solaris Management Console server starts up.@#@Solaris Management Console server starts up on
port 898.@#@
The user SMC Service was logged in as role root.@#@0@#@0@#@off@#@^A�m�vjj�^A^E^A^A^A^AAuthentication Service@#@1@#@0@#@root@#@sun02@#@sun02@#@1066871233865@#@Session opened@#@A secure session was established for user "root" from host "sun02" with session identifier 1066871233422.@#@
The user root was logged in as role root.@#@0@#@0@#@off@#@^A�m�\2127=/^B^[��UMgrProvider@#@0@#@2@#@root@#@sun02@#@sun02@#@1066871280383@#@Listing user(s) failed@#@The details for User root were not fully retrieved.
The Users Full Name could not be returned due to an unknown reason.@#@@#@0@#@0@#@off@#@^A�m��}�d^C2��UMgrProvider@#@0@#@2@#@root@#@sun02@#@sun02@#@1066871283929@#@User modify failed@#@User root was partially modified. See the error log for further details.@#@@#@0@#@0@#@off@#@^A�m���\202^O^D,��UMgrProvider@#@0@#@2@#@root@#@sun02@#@sun02@#@1066873142980@#@Listing user(s) failed@#@The details for User root were not fully^Q�^Q^P^T�f�(^O^A�m��fym;^Ulogsvc.wbem.version.1^A�m�_�\236�C��CIMOM@#@2@#@0@#@N/A@#@localhost@#@sun02@#@1066871122857@#@CIM Object Manager Started@#@CIM Object Manager version 2.5.1 build 04/29/03:17:32 started@#@null@#@0@#@0@#@off@#@^A�m�"b�RC^A^ASolaris Management Console Server@#@2@#@0@#@root@#@sun02@#@sun02@#@1066871201263@#@Solaris Management Console server starts up.@#@Solaris Management Console server starts up
on port 898.@#@
Hope this helps !
Thanks again -
While starting the SAP Management console " SDM" stopped , rest all fine
Hi
When start the SAP Management console, all are runnig in running state
Except "SDM" ? What is the problem ?
What is need to do on this ?
regards
kiran LVSHI,
When i set SDM in integrated mode and say StartServer.sh its givibvng the below error. any idea?
CompilerOracle: exclude
com/sapportals/portal/pb/layout/taglib/ContainerTag addI
viewResources
CompilerOracle: exclude
com/sap/engine/services/keystore/impl/security/CodeBased
SecurityConnector getApplicationDomain
CompilerOracle: exclude
com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator g
enerateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils
escapeToJS
CompilerOracle: exclude iaik/security/md/SHA a
CompilerOracle: exclude
com/sapportals/portal/prt/core/broker/PortalServiceItem
startServices
CompilerOracle: exclude
com/sap/engine/services/webservices/server/deploy/WSConf
igurationHandler downloadFile
CompilerOracle: exclude
com/sapportals/portal/prt/jndisupport/util/AbstractHiera
rchicalContext lookup
Starting SDM - Software Deployment Manager...
tc/SL/SDM/SDM/sap.com/SAP AG/6.4009.00.0000.20040910093614.0000
JStartupFramework is active
Operation mode of SDM in JStartupFramework is "Integrated".
Check if Server is running already.
OK server is not running. Enable SDM Process in JStartupFramework.
Successfully enabled SDM Process in JStartupFramework.
+ The SDM server will be started by the JStartupFramework now. +
Waiting 5 seconds for SDM server to start...
SDM server not up after 5 seconds. Waiting for another 5 seconds.
SDM server not up after 10 seconds. Waiting for another 5 seconds.
SDM server not up after 15 seconds. Waiting for another 5 seconds.
SDM server not up after 595 seconds. Waiting for another 5 seconds.
SDM server not up after 600 seconds. Waiting for another 5 seconds.
ERROR: SDM server startup not finished after 600 seconds. Giving up.
Could not start SDM. Processing error. Return code: 4 -
Error while starting weblogic Managed Server
Hi ,
I am new to SOA 11g. I installled the latest version(11.1.1.4) of all the components.I started web logic and able to login into Admin Console but I have a problem
while starting Managed Server.It gives me an error saying
<Feb 2, 2011 2:01:29 PM IST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 17.0-b17
from Sun Microsystems Inc.>
<Feb 2, 2011 2:01:30 PM IST> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.management.ManagementException: Unable to obtain lock on C:\Oracle\Middleware\user_projects\domains\fmw_domain\servers\AdminServer\tmp\AdminServer.lok.
Server may already be running
at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.java:159)
at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.java:58)
at weblogic.management.internal.DomainDirectoryService.start(DomainDirectoryService.java:74)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:879)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:566)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:467)
at weblogic.Server.main(Server.java:71)>
<Feb 2, 2011 2:01:30 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Feb 2, 2011 2:01:30 PM IST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Feb 2, 2011 2:01:30 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Can anyone help ?
Regards,
Vikas Manchanda
Edited by: 829347 on Feb 2, 2011 12:48 AMHow are you starting the managed server? Is it a new install? The error suggests that the managed server is already running. You could check the windows task manager to see if there is a Java process running (or two if managed and admin server is on the same machine)
Damien -
''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/793259]''
I installed Adobe dlm add-on and now Firefox will not open. I see the process starting in Task Manager but no window opens. Unistalled Firefox then re-installed but still no luck. HELP ME! I do not want to use IE! I presume it has something to do with Adobe DLM as ever since then it is not working.I had this problem for a couple weeks as well and it was extremely frustrating considering we use firefox for all our company tasks. Here is the solution:
First of all if you have no bookmarks you want to save, then go directly to step 7. If you want to save your bookmarks first, then follow these steps.
1. Shut down the computer
2. Reboot and open firefox
3. Go to Task Manager, right click firefox.exe, and click END PROCESS TREE
4. WAIT 30 SECONDS! Then Double-click the shortcut to try and open firefox again
5.Repeat steps 3 and 4 until firefox finally opens (trust me, eventually it will)
6. Once it finally opens, backup your bookmarks,
7. Download a copy of firefox from there website
8. Uninstall from programs menu and make sure to check the box REMOVE ALL COMPONENTS
9. install the new copy and BOOM! it works
If it doesn't work, you're an idiot. If you don't want to reinstall firefox, then you're out of luck. Good Luck!
Maybe you are looking for
-
Best Practice for custom controller
Hi Experts, In my current project we have one DC with single component and 12 views (4 business functionality each has 3 view flow ). Now complete logic is in component controller itself and planning to divide business logic into 4 custom controller
-
FI-CRM Integration Study Material Needed
Dear Gurus, FI-CRM Integration material is needed. Thanks.
-
Hi, In my BMM, I have two dimension tables(Plan Dim, Stage Dim) and one fact table(Combine fact). Currently I have all my joins to be an inner join, in the source of my fact. (which is producing wrong results). This is what I am trying to accomplish.
-
Sending the same email message several times to contacts. Turned off iCloud, but still sending message. A user had synced all of his contacts from his computer and iPhone to his iCloud. Today, his iCloud sent out the same message 20 times to all r
-
Hi, I need to import a zpool but it does not show any pool: # zpool import no pools available to importAnd when I try zpool status: # zpool status pool: raid state: UNAVAIL status: One or more devices could not be opened. There are insufficient