Status error 0xc00000e9 PLEASE HELP!!!

Yestarday my laptop (a satellite L450-11W) took a slight fall off my bed onto the floor. I picked it up and all seemed ok until i got this error message:
Windows has encountered a problem communicating with a device connected to your computer.
This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM that is failing. Make sure any removable storage is properly connected and then restart your computer. If you continue to recieve this message, contact the hardware manufacturer.
Status: 0xc00000e9
Info: An unexpected I/O error has occured
I press enter to continue and then this comes up after loading the Toshiba logo again:
Launch startup repair (recommended)
Start windows normally
Which ever one i choose the same thing happens, it will take me to a screen saying
Windows is loading files, it will fill the bar once very quickly before stopping at about a sixth of the way the second time round and will not go any further. It then takes me back to the error screen.
This is the sqme for all the f8 options such as safe mode that have been suggested in other forums and each has resulted in the exact same thing.
I had headphones plugged into it at the time which unplugged from the laptop when it fell. Also there was a CD in it at the time which wasn't running but when i took it out it appeared to be faulty.
Please help as this is starting to worry me now as i have school work due in soon,
Thanks in advance,
Danny

I almost alway go into Window MINI xp. If this successfully loads with out any issues...try using a Wireless mouse and insert the Dongle into each of the USB ports to see if they all work. And the SD Card Slot...may not function as the drivers are not loaded.
If all of this is good. And obviously the DVD-Rom drive is working...then we have an issue where the Hard Drive Heads may have come into contact with the Platter and ruined the Sector with the boot data it needs to continue a normal boot cycle.
"My comments are my own reality" Consider these in addition to other sources. I only know what I know.
Dan

Similar Messages

Error messages please help !!!!

Hi.
It is driving me mad. It is not possible neither to install NW_JAVA_700SP14_SR3 nor
NW_JAVA_700SP09. Always the same error ?
Please help what is wrong, I get these error messages:
ERROR 2008-07-11 13:53:02.750
CJS-30051 Cannot insert a key value pair in the secure store files. SOLUTION: See output of log file SecureStoreInsert.log: SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
ERROR 2008-07-11 13:53:02.796
FCO-00011 The step insertAdminDataInSecStore with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|insertAdminDataInSecStore was executed with status ERROR .

ever been faced with the same problem ?
Why deleting ? It that only one way to fix this problem ?
What are the others doing in such cases. Or am I the only one person
where has this special problem on the world. Becides I dont believe
in solving the problem through removing mentioned directory and
reinstalling. Nevertheless I will try it. I let you know about the result.
bye
sas

Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error." Please help.

Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error." Please help.

Try this:
Open your picture file
Access the clone stamp tool
Hold down the ALT key on the keyboard and left click on the area from which you wish to clone, then release the ALT key, and click to place the pixels at the destination
TIPS:
It is a good idea to open a blank layer at the top in the layers palette, and do the cloning on this layer. Be sure that "sample all layers" at the top is checked. You can change the layer opacity if necessary
Use the bracket keys next to the letter p on the keyboard to increase & decrease the size of the cursor
Let us know how you make out with the error message now.

It says "error 7, windows error 127" Please help

It says "error 7, windows error 127" Please help

I tried that, got this error:
An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32".version="8.0.50.727.6195".publicKeyToken="1fc8 b3b9a1e18e3b".processorArchitecture="x86". Please refer to help and Support for more information. HRESULT: 0x8007422.
Please help!

Can't install Adobe Flash player ERROR. Please help

I tried to download the update of Adobe Flash Player BUT every time I try to download it... Look at the screen shot. ERROR.
Please help me I am really happy if someone here can help me.

Hello,
The log file indicates there are permissions issues on a couple of files and they are not being removed. This is preventing the installation of the new version. Please run the uninstaller, posted here Uninstall Flash Player | Windows, and post an updated FlashInstall.log file, and a screenshot of the files remaining in the /Macromed/Flash directory after running the uninstaller. Please only run the uninstaller and do not attempt to re-install at this time.
Thank you.
Maria

After the IOS7 update, i can no longer use my imessage and facetime. It says "waiting for activation" and tried to log in on my apple id but it turned out to connection error. Please help me guys! Thank you.

After the IOS7 update, i can no longer use my imessage and facetime. It says "waiting for activation" and tried to log in on my apple id but it turned out to connection error. Please help me guys! Thank you.

Have you tried to reboot your phone(hold home and lock button simutainiously)?

Error 1001 - please Help!

I am going crazy! the software update keeps on displaying the error code 1001.
I've been trying to activate my tablet since saturday, but it won't let let... it keeps on informing me of the unknown error!@
please help!

I am going crazy! the software update keeps on displaying the error code 1001.
I've been trying to activate my tablet since saturday, but it won't let let... it keeps on informing me of the unknown error!@
please help!

My iPod is jailbroken and does not work. It is now in DFU mode. It doesnt let me fix it When I restore it, it says error 3194.Please Help

It is now in DFU mode. It doesnt let me fix it When I restore it, it says error 3194.Please Help me!

Go elsewhere. JB voids the Apple warranty and means you will get no support from Apple, including from this Apple forum.

TS3221 my iphone 4s is not connecting with itunes and giving me a message of unknow error 0xE8000012 Please help me out

my iphone 4s is not connecting with itunes and giving me a message of unknow error 0xE8000012 Please help me out

You've managed to permanently damage the phone. As gdgmacguy suggests, buy a new one. Preferably from a legitimate source.
You may also want to keep in mind that it is illegal to use the Gevey SIM in pretty much every country on the planet. It may still be legal on the continent of antarctica, but that's only because penguins don't use cell phones as a rule.

After i updated my iphone 4s from 8.1.2 to 8.1.3 problem occurred.i cant restore and update my phone?saying that iphone could not be restored,an unknown error ocuurred.please help me?

After i updated my iphone 4s from 8.1.2 to 8.1.3 problem occurred.i cant restore and update my phone?saying that iphone could not be restored,an unknown error ocuurred.please help me?

Thanks for the update and clarification. In researching the issue it seems that the 2003 error code may have something to do with the USB connection. I would use this section of one of the above articles:
Get help with iOS update and restore errors
If the USB connection between your device and computer is interrupted, you might not be able to update or restore.
To narrow down the issue, you can try different equipment:
Use the USB cable that came with your device, or a different Apple USB cable.
Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
Try a different computer.
Solve other issues with the USB connection, then with your security software.
If you still see the error message, check for hardware issues by following the next section.
Check for hardware issues
Related errors: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer might have a hardware issue that stops the update or restore from completing.
Check that your security software and settings aren't blocking your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Make sure that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.

HT4211 I'm not able to download apps from App Store. It never downloads and it shows waiting status.can somebody please help me resolve this issue

I'm not able to download apps from App Store. It never downloads and it shows waiting status.can somebody please help me resolve this issue

I really do not think it is the iPad or your network connection. Other users have reported this very same issue. Try this and see if it works for you - it may not work - but it's easy to try - harmless - and it has worked in the past for others.
Try signing out of your account and restart your iPad.
Go to Settings>Store>Apple ID and tap the ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. Go back to Settings>Store> Apple ID and sign in again.

HT201210 i cannot get my phone out of recovery mode, when I tried to restore on itune it gives me error 1608. please help me

i cannot get my phone out of recovery mode, when I tried to restore on itune it gives me error 1608. please help me

While YOU may not have attempted to jailbreak the phone, SOMEONE ELSE did. Error 1015 occurs by attempting to restore a previously jailbroken phone.
It's very likely you may NEVER get your phone out of recovery mode and your phone may be rendered permanently bricked.
Terms of Use of this forum prohibit the discussion of jailbroken phones. You'll have to scour the internet for a solution to your problem, if indeed one exists.

Hi i have problem with my hp mini is giving me a error CNU9391WZR PLEASE HELP

Hi i have problem with my hp mini is giving me a error CNU9391WZR PLEASE HELP
Hp mini 110 1140el

Yes bios password, i forgot my windows password so im trying to reset to manufacturing settings but keeps asking me for bios password... Please help

Hi, someone please help me out... am Nelson and got an issue with my apple Qmaster... I got OSX maverix and on my system preferences the Apple Qmaster dosent load but only gives an error, someone please help.

hi, someone please help me out... am Nelson and got an issue with my apple Qmaster... I got OSX maverix and on my system preferences the Apple Qmaster dosent load but only gives an error, someone please help.

the error is like "Could not load Apple Qmaster preference pane"
if there is a way around it please help me coz I cannot render my video projects on Compressor anymore...

WWS-32136 UTL_HTTP error. Please help

Hello,
I am trying to get all content area content
to show up inside the folder(or area). When I want to get WebDB reports or external sites
to display within the content area, I get
a utl_http error. Here is what I did:
1. Create a Content Area
2. Create an item or type URL
3. Check the "link displays item in folder area" as the display options attribute.
When I click on the link, webdb reports take
up the entire page, while external url or
external apps (like giving a link to www.oracle.com) ends up giving me a utl_http error.
Please help !!
Sanjay

Sanjay
Did you review the looking at the troubleshooting guide on OTN: http://technet.oracle.com/products/iportal/htdocs/portal_troubleshooting.htm
Seaching this page using the keyword 'utl_http' returned a likely solution:
Cause: This is most likely happening because of a bug in the UTL_HTTP package that shipped with early versions of the Oracle 8.1.6 database on Windows NT.
Solution: You must download and install the 8.1.6.2 patch from http://metalink.oracle.com (click patches, and then select "product: Oracle Server - Enterprise Edition", "platform: MS Windows NT"). You must be registered to use Metalink.

Status error 0xc00000e9 PLEASE HELP!!!

Similar Messages

Maybe you are looking for