Status flags in TOC not setting

Hi,
I just recently created a project with a table of contents. There are a number of click boxes and 'continue' buttons that pause the project. Sometimes, even though the project has moved on from the slide, the status flag is not set in the TOC. Sometimes it does work though. This is encountered by all users with this project.
Suggestions?

Hi there
I think you may be encountering the following situation.
If you have a Click Box or Button object that is left at the default action of "Continue", the playhead continues to advance and it reaches the slide end. Once it reaches the slide end, the flag is set to indicate the slide has completed.
If you change the default action from Continue to "Go to the next slide" or perhaps "Jump to slide", the playhead never really reaches the end of the slide. So Captivate doesn't consider the slide to have been "visited".
Thoughts here are to possibly stage the Buttons or Click boxes so they pause at the actual end of the slide? Then Captivate may consider the slide to have been viewed and set the flag accordingly. Perhaps try that.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Similar Messages

Captivate TOC edit status flags

With Captivate 8, the status of a question that is not answered is still marked as viewed. I would need to know if there is a way to edit how those status flags work. If not, can I create my own TOC to set status flag as I prefer?
I would like to have a TOC to flag all slides not viewed with a red flag and then remove the flag after they viewed or answered the question. If that's not possible at least to show which questions were answered with a checkmark, not viewed.

Hi Again,
I just looked at your link and don't think that will help.
The course is actually a 110 random question course. It requires free navigation to go forward and backward and should show which questions were not answered. It's not based on chapters.
Thanks again!
Laura

Status Flag not appearing if branching

I have a CP project with branching after a question slide (slide 14). If the user gets the question wrong, they follow an alternate path to slide 15 to review the correct answer. Then they hit slide 16. If they get the question right, they skip slide 15 and hit slide 16. The user who gets the question right will never see slide 15, thus making the TOC think they didn't see all the slides. The TOC will not mark the module as complete with a status flag. Help?

Hello,
TOC can help users by marking slides as seen. But you have to be aware that only slides that are completely viewed will get the status flag. It is also great for self paced learning, for navigation. From your question I understand that you want it to take over the role of a LMS: completion of a course is normally reported by the LMS. Even there a branching in a course will cause problems if you want to have a Completed status reported. For a LMS you could indicate which % of slides have to be watched.
What do you really want to achieve with the TOC? Perhaps it could be realized with some variables and advanced actions.
Lilybiri

My airport time capsule did not set up successfully, and then status light flash amber

Hi, Guys
I am the first time user of the time capsule, please help how to proceed?
I have set up the first time and my airport time capsule does not set successfully, then I try to reset to factory setting. After this, although I use the ethenet cable to connect the router to the airport, the status light flash amber, always, even after the reset.
Also, I can see that airport time capsule base station from the wireless network when airport is plugged in. However, when I want to access to it.

Thanks for your guidance, but the product is really anoying. First, I am sure that the airpor utilities is 6.3.
and I also follow your instruction that to set the IPv6 as local link mode. But still get the same error as mentioned in my first post.
Therefore, I have tried to use the bridge mode but could not find it, and therefore still can not set it up successfully, even though I reset the factory again(press the reset button 5 secconds at least).

Workflow Error Message: System Account - The Workflow could not set Content Approval Status

This is the first time I try an approval workflow. I am using a template in MS Word and assigned an approval workflow to it. The approval workflow is only going to one person in this case.
When I start the work flow the following 3 error messages show up:
Workflow Error Message: System Account - The Workflow could not set Content Approval Status. Enable content moderation for this list and run the workflow again.
Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the e-mail has a valid recipient.
Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
Thank you for your kind guidance.

Hi,
For the first error: Did you set Content Approval in the workflow? If so, see if you have it in the versioning settings of the list settings.
For the second error: double check your recipient is set up as being valid. Did you type in the email address or is it referring to a people picker field? also, make sure that in the workflow for the email that you actually populated it in the
To: field.
for the third error: I suspect that either your farm is not configured for email. Or, this error is a knock on from the second error. If you get the second error rectified it may clear this error. If not then double check the email settings
for your farm.
Johnathan Lightfoot

Status procedure CRMORD_I could not be set

hi all,
We are trying to create an order into ECC and replicate it to CRM, but we are facing to the following issue.
Status profile CRMORD_I does not exist in ECC6. Has it to be created the same way it is in CRM 5.2 ? If yes, we are facing another issue : object type "CRM order item", which is linked to status profile CRMORD_I does not exist in ECC6. Where can we create it ?
Thanks

Dear All,
I met similar error before, it happens when you change the item category in ECC but there is a status profile assigned to the item
category in CRM with an active status set.
In CRM, when the item category is changed, the system can only change (or delete) the status profile if there is no user status set for this item. So for example, if there is already a status set for an item (Say, E0001 'Open' is active) in CRM, so a change of the user status profile is impossible. If you need to change the item type, then you have to make sure that there is no active user status in the item.
Please see note [1113116] point 2. This is a restriction in CRM. If you try to make the same changes directly in CRM you will also get the same error.
It is not allowed to change the item category if the document has been saved and the status profile of the new item category is different from the old one.
That is the reason why the error occurs when the data reaches CRM frm ECC.
In order to prevent that there are sysfails in the inbound queue you can implement note [1438966] - after this is implemented you will not have the queues failing but you will get the error message in the sales order in CRM.
You should ensure that the configuration for alternative item categories is R/3 is the same as in CRM and in this case all the alternative item categories should have no status profile or all the same status profile configured.
I hope this could be helpful.
Best regards,
Maggie

PO status not set to Deletion

We are using ECS scenario on SRM Server 5.5 with ECC 6.0.
Deletion of a PO line item changes the value of the PO to $0.00, but does not set the status of the PO to Deletion. It remains as "Ordered". (PO has already been outputted).
Furthermore, the backend PO line item is also not deleted.
Any idea how does the status of a PO changes to "Deleted"
Any help will be appreciated.
Thanks
-Bakulesh

Hi Bakulesh,
Can you please have a look at the purchase order line which you have deleted , status of that will be set to 'deleted'. There will be one thrash icon which indicates that the purchase order line is deleted.
As first step , for your purchase order , please check out following things.
1) as far as i know , there is no status 'deleted' for the purchase order header , only the lines of the purchase order will have status 'deleted'.
2)do you have this problem with all the purchase orders , or it happens only for specific purchase order?
3) In the transaction 'BBP_PD' , you can have a look at the status of the purchase order at the header level and item level.
4)run the function module 'BBP_PD_PO_GETDETAIL' for the purchase order and see what are the values for status in table 'ET_STATUS'.

Physical Inventory Status Flag Not Reset after Year End Inventory Procedure

Hi,
We are just done with the Year End Inventory Procedures, and to my surprise, a lot of Storage Bins are having their Physical Inventory status flag as ACTIVE, which they should not have.
An example bin has incorrect status-u201Ccountedu201D in the associated inventory record number . LINV status is L-cleared. LINK status is Z-counted, LINP status is Z-counted and physical inventory flag is ON in table LAGP, but status must be L-cleared and physical inventory flag should be OFF (or blank) in table LAGP.
Our users did not use LI20 to clear the empty bins or bins had no difference to post (meaning book qty & count qty are the same).
I already tried the Program RLREOLPQ and OSS Note 824904, but no its of no use in our Case.
Any guess/hint for the problem?

I solved this with thehelp of a Zprogram writeen wrt the OSS note mentioned above in the question.

MSA copying activity: flag 'main team member' not set automatically

Hello forum,
when I copy an activity in msa,
the responisble persons are copied too, but saving is not possible:
error: flag main team member not set
So i have to set this flag manually.
Why does the system not copy this flag too ?
Where can I change this bad behaviour ?
Thanks
Gerd

Hello,
did you already check the following:
1) activities created in CRM have this main flag set properly for exactly one responsible employee defined for this function
2) customizing is synchronized properly to CDB/Mobile:
CRM_DNL_PAR_FCT
CRM_DNL_PAR_PDD
CRM_DNL_PAR_PDP
CRM_DNL_PAR_UIS
3) activities downloaded to mobile have this main flag set properly for exactly one responsible employee defined for this function
4) it is possible to create the same activities in mobile as in CRM using the same functions (e.g. the customizing is proper on mobile)
For my understanding I would rather suggest to change/correct the data in CRM instead of modifying the copy functionality for mobile.
Regards,
Wolfhard Bierlein

Error: 'Unicode Flag is not Set'

Hi,
I am trying to include a ZSRF function module in my program (it contains data types that I want to use) and I get an error saying that unicode flag is not set. How can I set this flag?
Val.

Goto--> Main Program.
Then Goto->Attributes.
You can change the unicode checks active flag here

Network Status Internal Modem not set up to Fax on PB G4 High Res

What do I need to do to set up the Internal Modem to Fax. I connect to the internet only using Airport & cable ethernet. In System Preferences > Network > Show > Network Status Airport is on top of list. Internal Modem is the only other item shown; It says Internal Modem is not set-up. I do understand that it is impossible to send a fax via Airport. But what does setting up the modem mean since I do not have or use a Dial-up internet connection. Configure button takes me to PPP, TCP/IP, Proxies, and Modem. Under the modem button I have chosen Apple Internal 56k Modem v.92 this is the only option I can choose. What can I do. I have both the Fax status and Modem status in the menu bar both stay at idle while tring to send a fax. Can anyone help?
Thanks Axlan
PowerBook G4 15' High Res Mac OS X (10.4.5) RAM 2GB, HD 100GB (7200rpm)

Sooo, what happens if you goto...
http://localhost:631/jobs
In your Browser?
I'm not certain, but I think AJ trashes those spool files.
Might have a look here...
http://safari.oreilly.com/0321335473/ch12lev1sec8

SVM state database replica Master flag not set for any replica

Hi guys,
Recently i have done root mirroring. After creating svm volumes, i ran the metadb command to create state database replicas on the replaced disk. I created only one replica that time. I tried creating additional replicas but it said like replica already exist on the slice. So i deleted the replica on the slice. Thn i created 3 replicas again & ran metadb. Output of metadb command is below. I found there is not master flag not set for any replica. I like to know whether it would create any issue or it is fine.
flags first blk block count
a u 16 8192 /dev/dsk/c1t0d0s7
a u 8208 8192 /dev/dsk/c1t0d0s7
a u 16400 8192 /dev/dsk/c1t0d0s7
a p luo 16 8192 /dev/dsk/c1t1d0s7
a p luo 8208 8192 /dev/dsk/c1t1d0s7
a p luo 16400 8192 /dev/dsk/c1t1d0s7

That shouldn't be any problem, i think the metadb's are just read at boot, and at boot one of the replicas will be choosen as the master, and will then get the m-flag.
I suspect that you deleted the replica which was used as the master during the last boot, which is why none of your replicas have the m-flag at the moment, which is not a problem as it will be choosing a new replica during the next boot.
.7/M.

Initial Work status not set autmoatically for new created member

Hi,
if we create a new budget version, and process the category dimension we notice that the first work status (locked in our scenario) is not set automatically by default... As a result users can still input data for the new budget version. Only if we first change the work status of the new budget version (and put it back), the work status can be applied ...
Is this normal behavior?
Dries

Yes, I think what you're seeing is "normal" behavior -- it may not be what you want, though. In fact, I don't think this issue is limited to your creating a new member. It also applies to the existing members of your work status dimensions.
I had one project like this, where the customer wanted the default work status to be locked, and then for the finance administrator to explicitly open up the category & time period for users. We never got it to work in a really clean manner.
For the work status check to take effect, there must be records in the tblFinanceLock table (where Finance is the applcation name). And the only way that records normally get into that table is by changing the work status manually. We played around with a SQL script to populate that table, to automatically set the status to the first level (locked), but never found something that we were comfortable with.
I'd be curious to hear if someone's made something like that work well.

DB-instance not set to status "online" automatically after the start of DB-service

Hi,
I have installed an Oracle server (P4 1,7 GHZ / Win2000 Prof./ Oracle
version EE 8.1.7). I have created a database but now I have some problems.
After rebooting the server, the created DB-instance does not start
autmatically although the service (OracleService [databasename]) is being
started properly. So I have to launch the instance-manager and launch the
instance manually. What is even more a problem is that the instance can only
be started by the Windows user who created the database. If another user is
logged on the Windows system, the instance cannot be started at all. When
trying to start the instance, the task is being stopped right at the first
of the three steps (launch, mount, ...). An exclamation mark appears, but no
error message at all. I did not find any error log.
For further tests, I have logged in with another Windows user and created
another database . The result was the same. The instance was not set to
"online" automatically and only the Windows user who created the DB was able
to set the instance online.
Any help would be appreciated.
Best regards,
Christian

Hello,
Please note that SQL Server requires at least 1 GB of RAM. The operating system (Windows Server) requires 2 GB of RAM (recommended) or 512 MB (minimum). This means any virtual machine that will receive the installation of a SQL Server instance requires 1.5
or 2 GB at least.
The behavior of SQL Server setup tells me that the virtual machine does not have enough memory assigned or .NET Framework 3.5 was not enable on Control Panel->Program
and Features before trying to install SQL Server.
The following thread is about another possible cause of this error:
http://social.msdn.microsoft.com/Forums/mr-IN/sqlsetupandupgrade/thread/575d3025-69f5-4152-a473-44496b008811
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

How to check the value of "The Interrupt Status Flag"?

Hi, thank you for reading this post!
Invoking Thread.interrupt() sets the value of the Interrupt Status Flag.
Just wondering if there is a Java method to check the value of this flag? Or is using isInterrupted() or interrupted() the only way to check?
http://download.oracle.com/javase/tutorial/essential/concurrency/interrupt.html
Thank you in advance for your help!
Eric

Below is the full code. As soon as the Thread.sleep() is taken out in main(), the interrupt is detected in the child thread. But if the sleep() stays, then the child thread goes into an infinite loop. It's not detected the interrupt.
//ParentInterruptChildThreadCatchedDemo.java
//Program function: This program demonstrates the parent thread (main()) interrupting a child thread (thread1).
//Threaded class
class TryThread extends Thread {
     //fields
     private String threadname;
     private long aWhile;
     //Constructor
     public TryThread(String tname, long delay) {
          threadname = tname;
          aWhile = delay;
     //run() method
     public void run() {
          while(!Thread.interrupted()) {
               //Do work
          try {
               System.out.println(Thread.currentThread().getName() + " was just interrupted!");
               throw new InterruptedException();
          } catch(InterruptedException e) {
               //System.exit(1);
               return;
public class ParentInterruptChildThreadCatchedDemo {
     public static void main(String[] args) {
          Thread thread1 = new TryThread("thread1", 2000L);
          thread1.start();
          try {
               System.out.println("main() goes to sleep for 10 second.");
               Thread.sleep(10000);
               System.out.println("Statement after main() sleep().");
          } catch(InterruptedException e) {
                e.printStackTrace();
             //Interrupt thread1
              int interruptFlag = 5;
              for(int i=0; i<11; i++) {
                   if(i == interruptFlag) {
                        System.out.println("Condition met, going to interrupt thread1 ...");
                        thread1.interrupt();
                        System.out.println("Thread1 interrupted!");
              System.out.println("Ending main()");
/*Output:
main() goes to sleep for 10 second.
Statement after main() sleep().
Condition met, going to interrupt thread1 ...
Thread1 interrupted!
Ending main()
INFINITION LOOP
*/

Status flags in TOC not setting

Similar Messages

Maybe you are looking for