Status : GREEN in MONITOR , YELLOW in MANAGE

Hi Experts,
We had scheduled a Full Upload through an infopackage. When we check the request it is green in monitor but in manage screen of the INfocube it is still Yellow. This has been occuring since last few months........manually makin the request into green is possible but i think thts not the solution.
Can anyone please let me know why such discrepancies are occuring?
Any suggestion wil be rewarded
Rgrds,
vaishnavi

Hi Vaishnavi,
U can check whether is there any process is running for ur request in SM37 or not? or u can check it in SM50 as well..
Check the details tab of the load from the monitor screen and check if everything is finished for ur request..
If there is no errors or process is running for ur request then u can manually change the Qm status of the request in the manage of the Cube..
Also check from the Monitor of ur load --> Menu bar --> Environment --> Set quality status to OK automatically has been enabled for ur Cube or not?
If not then u need to check this one for getting the proper status to be updated for ur request.
thanks
Assign points if this helps

Similar Messages

Status of elements not appearing in Management Cockpit

The Problem is as follows:
when you look into the management cockpit and ask to display data from, for
example, December 2004, the cockpit shows all the four walls with
elements without status, when, in fact, all the elements have a status.
You can notice they have a status (green, yellow or red) when you click
and see the detail (for example, the financial situation is shown with
no status, but if you go into financials and then to the general
overview, for example, you can see that you've got maps and status
there. So, in the financial situation you should have a status as well).
I am using SAP_BW 3.10
Looking forward to hearing from you.
Regards,
Deepak

hi,
Usually when I browse sourcing area the last work item should be my shopping cart line item.
But I am not able to find the line item in sourcing area,I searched in all possible ways,do you think I missed some sort of settings regarding this.
regards,
IGA.

System Monitoring with Solution Manager Ehp1

Hi,
I'm Tomas Piqueres, and I'm working in a VAR SAP with Solution Manager.
Recently, we installed Solution Manager Ehp1 and we are trying to configure it for System Monitoring. When I worked with Solution Manager SP17 I used to go to transaction RZ21 to add the system I wanted to monitoring and then put the SID and RFCs of the system.
Now with Solution Manager Ehp1, when I create the system in transaction RZ21, first I have to set the Component Type to Be Monitored and then the SID, Message Server Logon Group, the client and user are set automatically, and the password I've set to user CSMREG.
when I fill all the entries, I can see the RFCs used for the monitoring of the system. Those RFCs are set automatically:
<SID>_RZ20_COLLECT
<SID>_RZ20_ANALYZE
I can't edit those RFCs, so I have to create it manually. I check that RFCs destination works fine and both pass the authorization test, so when I try to save the system at transaction RZ21, I see the following errors:
<SID>_RZ20_COLLECT_123539Error when opening an RFC connection
Error during remote call of SAL_MS_GET_LOCAL_MS_INFO function: Error when opening an RFC connection
Error during remote call of SALC function: Error when opening an RFC connection
Error during remote call of RFC1 function: Error when opening an RFC connection
I've been looking for information about those errors and how to monitoring with Solution Manager Ehp1, but I haven't found anything usefull.
Please, Could you help me?
Thanks and regards,
Tomas.

Tomas,
I need to configure EWA from my Solman system and I completed the steps (defining and creation of RFC destinations to the target systems from my Solman system). I downloaded the lates ccmsagent file from the market place based my target system configurations.
Herewith attaching the logs while I'm trying to check the profile parameter.
tqaadm@saptqa01:/usr/sap/TQA/SYS/exe/run 5> sappfpar check pf=/usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
================================================================================
==   Checking profile:     /usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
================================================================================
***WARNING: Unexpected parameter: DIR_EPS =/usr/sap/trans/EPS/----
***WARNING: Unexpected parameter: SAPSECULIB =/usr/sap/TQA/SYS/exe/run/libsapsecu.o
***WARNING: Unexpected parameter: abap/buffersize_part1 =1200000
***WARNING: Unexpected parameter: auth/auth_number_in_userbuffer =5000
***WARNING: Unexpected parameter: dbs/io_buf_size =100000
***WARNING: Unexpected parameter: rsau/local/file =/usr/sap/TQA/DVEBMGS30/log/audit/audit_++++++++
***WARNING: Unexpected parameter: rsau/selector1/class =35
***WARNING: Unexpected parameter: rsau/selector1/severity =2
***WARNING: Unexpected parameter: rsdb/rclu/cachelimt =0
***ERROR: Size of shared memory pool 40 too small
================================================================
SOLUTIONS: (1) Locate shared memory segments outside of pool 40
               with parameters like: ipc/shm_psize_<key> =0
SOLUTION: Increase size of shared memory pool 40
          with parameter: ipc/shm_psize_40 =1472000000
Shared memory disposition overview
================================================================
Shared memory pools
Key:   10 Pool
            Size configured.....:   642000000 ( 612.3 MB)
            Size min. estimated.:   637597428 ( 608.1 MB)
            Advised Size........:   640000000 ( 610.4 MB)
Key:   40 Pool for database buffers
            Size configured.....: 1048000000 ( 999.4 MB)
            Size min. estimated.: 1468229308 (1400.2 MB)
            Advised Size........: 1472000000 (1403.8 MB)
Shared memories inside of pool 10
Key:        1 Size:        2500 (   0.0 MB) System administration
Key:        4 Size:      523648 (   0.5 MB) statistic area
Key:        7 Size:       14838 (   0.0 MB) Update task administration
Key:        8 Size:    67108964 ( 64.0 MB) Paging buffer
Key:        9 Size:   134217828 ( 128.0 MB) Roll buffer
Key:       11 Size:      500000 (   0.5 MB) Factory calender buffer
Key:       12 Size:     6000000 (   5.7 MB) TemSe Char-Code convert Buf.
Key:       13 Size:   200500000 ( 191.2 MB) Alert Area
Key:       16 Size:       22400 (   0.0 MB) Semaphore activity monitoring
Key:       17 Size:     2672386 (   2.5 MB) Roll administration
Key:       30 Size:       37888 (   0.0 MB) Taskhandler runtime admin.
Key:       31 Size:     4806000 (   4.6 MB) Dispatcher request queue
Key:       33 Size:    39936000 ( 38.1 MB) Table buffer, part.buffering
Key:       34 Size:    20480000 ( 19.5 MB) Enqueue table
Key:       51 Size:     3200000 (   3.1 MB) Extended memory admin.
Key:       52 Size:       40000 (   0.0 MB) Message Server buffer
Key:       54 Size:    20488192 ( 19.5 MB) Export/Import buffer
Key:       55 Size:        8192 (   0.0 MB) Spool local printer+joblist
Key:       57 Size:     1048576 (   1.0 MB) Profilparameter in shared mem
Key:       58 Size:        4096 (   0.0 MB) Enqueue ID for reset
Key:       62 Size:    85983232 ( 82.0 MB) Memory pipes
Shared memories inside of pool 40
Key:        2 Size:    31168040 ( 29.7 MB) Disp. administration tables
Key:        3 Size:   114048000 ( 108.8 MB) Disp. communication areas
Key:        6 Size: 1064960000 (1015.6 MB) ABAP program buffer
Key:       14 Size:    28600000 ( 27.3 MB) Presentation buffer
Key:       19 Size:    90000000 ( 85.8 MB) Table-buffer
Key:       42 Size:    13920992 ( 13.3 MB) DB TTAB buffer
Key:       43 Size:    43422392 ( 41.4 MB) DB FTAB buffer
Key:       44 Size:     8606392 (   8.2 MB) DB IREC buffer
Key:       45 Size:     6558392 (   6.3 MB) DB short nametab buffer
Key:       46 Size:       20480 (   0.0 MB) DB sync table
Key:       47 Size:    13313024 ( 12.7 MB) DB CUA buffer
Key:       48 Size:      300000 (   0.3 MB) Number range buffer
Key:       49 Size:     3309932 (   3.2 MB) Spool admin (SpoolWP+DiaWP)
Shared memories outside of pools
Key:       18 Size:     1792100 (   1.7 MB) Paging adminitration
Key:       41 Size:    25010000 ( 23.9 MB) DB statistics buffer
Key:       63 Size:      409600 (   0.4 MB) ICMAN shared memory
Key:       64 Size:     4202496 (   4.0 MB) Online Text Repository Buf.
Key:       65 Size:     4202496 (   4.0 MB) Export/Import Shared Memory
Key:     1002 Size:      400000 (   0.4 MB) Performance monitoring V01.0
Key: 58900130 Size:        4096 (   0.0 MB) SCSA area
Nr of operating system shared memory segments: 9
Shared memory resource requirements estimated
================================================================
Nr of shared memory descriptors required for
Extended Memory Management (unnamed mapped file).: 64
Total Nr of shared segments required.....:         73
System-imposed number of shared memories.:       1000
Shared memory segment size required min..: 1472000000 (1403.8 MB)
System-imposed maximum segment size......: 35184372088832 (33554432.0 MB)
Swap space requirements estimated
================================================
Shared memory....................: 2050.4 MB
..in pool 10 608.1 MB,   99% used
..in pool 40 999.4 MB, 140% used !!
..not in pool:   34.4 MB
Processes........................: 716.8 MB
Extended Memory .................: 8192.0 MB
Total, minimum requirement.......: 10959.2 MB
Process local heaps, worst case..: 1907.3 MB
Total, worst case requirement....: 12866.5 MB
Errors detected..................:    1
Warnings detected................:    9
After checking the profile parameter I tried to run sapccm4x in /run directory but got the below error and I'm not able tomove further.
Pls have a look at these two and let me know what could I do to proceed further.
tqaadm@saptqa01:/usr/sap/TQA/SYS/exe/run 5> sapccm4x -R pf=/usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
INFO: CCMS agent sapccm4x working directory is /usr/sap/TQA/DVEBMGS30/log/sapccm4x
INFO: CCMS agent sapccm4x config file is /usr/sap/TQA/DVEBMGS30/log/sapccm4x/csmconf
INFO: Central Monitoring System is [SMP]. (found in config file)
      additional CENTRAL system y/[n] ?   :
INFO: found ini file /usr/sap/TQA/DVEBMGS30/log/sapccm4x/sapccmsr.ini.
INFO:
      CCMS version 20040229, 64 bit, multithreaded, Non-Unicode
      compiled at   Jun 28 2010
      systemid      324 (IBM RS/6000 with AIX)
      relno         6400
      patch text    patch collection 2010/1, OSS note 1304480
      patchno       335
INFO Runtime:
      running on    saptqa01 AIX 3 5 00069A8FD600
      running with profile   /usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
INFO profile parameters:
      alert/MONI_SEGM_SIZE = 200000000
      alert/TRACE          = 1
      SAPSYSTEM            = 30
      SAPSYSTEMNAME        = TQA
      SAPLOCALHOST         = saptqa01
      DIR_CCMS             = /usr/sap/ccms
      DIR_LOGGING          = /usr/sap/TQA/DVEBMGS30/log
      DIR_PERF             = /usr/sap/tmp
INFO:
      pid           4165682
INFO: Attached to Shared Memory Key 13 (size 200141728) in pool 10
INFO: Connected to Monitoring Segment [CCMS Monitoring Segment for application server saptqa01_TQA_30, created with version CCMS version 20040229, 64 bit single threaded, compiled at Oct 3 2008, kernel 6400_20020600_254, platform 324 (IBM RS/6000 with AIX)]
        segment status     ENABLED
        segment started at Tue Sep 14 09:35:56 2010
        segment version    20040229
ERROR: Shared Memory misconfiguration ==> can not monitor SAP application server saptqa01_TQA_30
       Dispatcher Admin Shared Memory (Key 01) and CCMS Shared Memory (Key 13) both in pool 10.
       Please change configuration with profile parameters
           ipc/shm_psize_01 = -<different pool nr>
       xor
           ipc/shm_psize_13 = -<different pool nr>
EXITING with code 1

Developement overview / monitoring in Solution Manager

Hello all,
I'm novice in Solution Manager and I don't know if my requirements are feasible.
I created a structure in SolMan, I found out how to uploaded "development specification" into Proj.documentation tab. Even the statuses for documents are OK.
What I'd like to do now is to use SOLAR02->Development tab to create "one dummy line" exactly for one development specification.
I don't want to use connection to ECC backend system so I need to define new "object type" and configured in different way (e.g. like the BMDD obj.type but with different behavior). In that line I'd like to keep the track about the development progress with using special statuses.
Only thing is, where am I supposed to define new "object type" .. or if my idea is able to be done in Solution Manager at all.
Thanks for any comments, reward points for everyone.
Tom

>
Kamal Kumar wrote:
> Hi Expert ,
>
> Is it possible to monitor the LDAP Server in Solution Manager.
> If yes then how should i proceed
>
> Regards,
> Kamal
Hi Kamal,
The monitoring setup for non-SAP software is actually not done on the solution manager system itself. The solution manager gets its feed of alert information from the satellite systems... specifically from CCMS.
For SAP systems, alerts from CCMS are activated and set up by default for the SAP environment. For third-party systems you have to be able to set up the interface to feed monitoring information from your non-SAP software to SAP's CCMS infrastructure.
You can get some information on CCMS agents via the website at http:
service.sap.com\monitoring. Go to 'System Monitoring and Alert Management' -> 'Monitoring in Detail'
I hope this information helps.
Regards
Amit

Status display in monitor

Hi experts,
In the consolidation monitor, I've got consolidation group hierarchy (company) called H1, and bellow all companies.
When I execute the function of data collection at the consolidation group level (H1) in the update mode, it executes the function for all companies, and even though some companies may not have the data, the status of all companies is the same: without errors, but with warnings.
It's hard to manage the consolidation process because I can't track which companies have submmitted the data and which haven't submitted, I mean visually in the monitor.
My question is: Is the status in the monitor workind correctly, and how can I track by task each company status?
Thanks in advance,
Edited by: Beatriz Fitzgibbon on Sep 5, 2008 11:50 AM

Yes the status is updated correctly. The wya to determine whether or the data has been collected is to have a task subsequent to the data collection for a validation to check this.

Monitor JMS IQ Manager (Sun Seebeyond)

Hi,
Within the JCAPS suite there is an eGate available for doing all the communication/monitoring with the IQ Manager. I wonder if it is possible to connect and monitor the IQ Manager from a stand alone Java application not running on the application server (I have come to the conclusion that no other API's are available than the eGate within the JCAPS suite, please correct me if I am wrong).
If there are no other API's available, maybe someone knows other means I should look into when it comes to monitor the health/status of the JMS IQ Manager.
// Mike

Note: This thread was originally posted in the JMX forum, but moved to this forum for closer topic alignment.

A family member set up my time capsule, promises that it is set up correctly but the light on the capsule isn't green, it is yellow, what does this mean?

A family member set up my time capsule and sayy it's workign correcly but the light on it isn't green, it is yellow...what does this mean?

If the Time Capsule is operating normally, the light will be green.
If the amber light is blinking, something is not adjusted correctly, or there may be an update available for the Time Capsule.
Do you have the device that was used to set up and configure the Time Capsule there? Is this a Mac? If yes, we need to know what operating sysem it is using.
If you are not sure, click the Apple icon in the upper left corner of the screen and then click About This Mac. Post back with the OS X Version number that you see there.

Stuck in To Be Delivered Status in Message Monitoring - Adapter Engine

Hi,
I have messages stuck in To Be Delivered status in Messages Monitoring. When i checked the Audito Logs, there are NO LOGS. I resent the message and now the logs indicated in the Audit Logs is:
2014-03-26 08:39:10
Information
The message was successfully received by the messaging system. Protocol: XI URL: http://<host>:<port>/MessagingSystem/receive/AFW/XI Credential (User): PIIXXXX
2014-03-26 08:39:10
Information
Using connection SOAP_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2014-03-26 08:39:10
Information
Message successfully put into the queue.
2014-03-26 08:52:48
Information
Admin action: Trying to redeliver message.
The connection between the receiver is ok, does this have something to do with the Communication Channels?
Please help.
thank you.

Hi Eng Swee,
there are messages that were cancelled yesterday and the status is 'Terminated With Errors'
this is what is indicated in the Audit Logs
2014-03-26 02:38:47
Information
Admin action: Trying to fail message.
2014-03-26 02:38:47
Error
The message status was set to FAIL.
2014-03-26 02:38:47
Information
Admin action: The message was successfully set to status failed.
2014-03-26 02:38:47
Error
Asynchronous error detected: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Message failed by admin.. Trying to report it.
2014-03-26 02:38:47
Error
Asynchronous error reported.
Is this the reason why the messages are stuck?
thank you!

To Be delivered status in Message monitoring

Hi,
There are some messages in TO BE DELIVERED status in Message monitoring while selecting integration server. I could neither cancel nor resend.
any input reg. this will be appreciated.
I didn't see any messages with TO BE delivered status in adapater engine.
I could able to clear What ever messages in system error status in adapter engine by filtering based on sequential id.
I have seen this thread & link also.
To Be Delivered
Re: "To be delivered" status in RWB -- Any solution?
http://help.sap.com/saphelp_nw04/helpdata/EN/49/e3fb40ef74f823e10000000a155106/content.htm
I could not see any entry in SMQ1, SMQ2, SM58 also
Thanks
Praba
Edited by: Prabaharan Rangasamy on Dec 8, 2009 1:02 PM
Edited by: Prabaharan Rangasamy on Dec 8, 2009 1:04 PM

Hi,
You cannot resend or cancell the messages which are in status "To Be Delivered". Check Receiver adapter File/Jdbc/ OFTP e.t.c. which is processing these messages.
Check with your Basis team to remove the lock of adapters if any. Or to process these messages you require soft restart of Java stack.
I had same kind of issue two days back with OFTP adapter messages and did soft restart of java stack with help of Basis team.
Hope it will helps you
Cheers
Veera

No longer any video visible, only green, pink and yellow blocks of color.

I am using FCE 4.0
For some reason I no longer see any video in my Viewer window and my Canvas window. The video image is completely messed up
All I see are seemingly random green, pink and yellow blocks of color. I do hear the audio the way it is supposed to be. I can see thumbnail images of individual clips in the Browser window
This is with projects I had already started to work on and with which everything seemed fine just a few days ago.
To see if old files might have gotten corrupted, I just captured a few minutes of new video, and the same thing happened. It seems to capture fine, but when I drag the clip from the Browser into the Viewer, I get the same green, pink and yellow blocks of color.
Does anyone have an idea what might be going on?

Just a thought - but have you checked to make sure you haven't accidentally got the magnification up really really high in your viewer or canvas windows ?

System Monitoring in Solution Manager 4.0

Hi all,
I want to set up system monitoring for landscape BW, ECC and SCM systems using Solution Manager 4.0 and am new to Sol Man.
So could anyone please help me with the steps.
Thanks in advance,
Sandeep.

Sandeep,
Trust me, there is no one resource that you can refer to and complete this system monitoring project. I recently configured this a couple of days ago. I can tell you that I haven't completed it yet. I have only completed the configuring the 'System Monitoring' part of it. I am yet to define monitors so that, I can monitor what I want of the satellite systems. So far, it took me about 4 days. Let me point out the basic steps you need to follow. Beyond that, please refer to the links I paste below:
Steps to configure 'System Monitoring' in Solution Manager:
1. Follow the 'Solution Manager Preparation' found under SPRO --> Solution Manager --> Read Me.
2. Make sure you have the latest ST-ICO and ST-SER installed in your Solution Manager (Note: 892412).
3. Make sure the Solution Manager has the latest support packages applied.
4. Prepare the 'Satellite Systems' as per note 455356:
     a. Create the role 'SAP_BC_CSMREG' (if it doesn't exist) with the following authorization objects
          --> S_CCM_RECV (with the objects and values mentioned in the above note)
          --> S_RFC (with the objects and values mentioned in the above note)
          --> S_RZL_ADM (with the objects and values mentioned in the above note)
          --> S_CUS_CMP (with the objects and values mentioned in the above note)
     b. Create a 'communication' user CSMREG (if it doesn't exist) and assign the profile S_CSMREG
5. Create the user CSMREG in Solution Manager using RZ21 transaction
          -->RZ21 --> Technical Infrastructure --> Configure Central System --> Create CSMREG user (Provide the required password and confirm).
6. An agent needs to be registered in all the satellite systems that collects the monitor statistics and pass on to the Solution Manager. Before registering the agent in the satellite system, a 'CSMCONF' file has to be generated in the Solution Manager and store it in a central location which, will be used by the CCMS agent while registration. This CSMCONF file holds the communication details for the agent to talk to the Solution Manager. To create CSMCONF file, proceed as follows:
          --> RZ21 --> Technical Infrastructure --> Configure Central System --> Create Start CSMCONF for Agents
          --> Store the file in a central location that can be accessed by the satellite system/s.
7. In the satellite system, copy the file 'CSMCONF' to the working directory of SAPCCM4X (F:\usr\sap\PD1\SYS\DVEBMGS01\log\sapccm4x - for example. If the 'sapccm4x' folder does not exist, create one).
8. Copy the downloaded 'SAPCCM4X.exe' file to the kernel directory on the satellite system.
9. Execute "sapccm4x -R pf=<path of the instance profile>". This should ask for the 'CSMREG' password and the admin user password on the solution manager system. Please input the same and confirm other questions. Upon confirmation, the CCMS agent should be registered in the satellite system.
10.Make sure you establish the trusted RFC connection on the Solution Manager to the satellite system you would want to monitor. This you can do from 'SMSY' transaction.
11.After successfully creating the RFC connections, and assigning the system to a logical component, please go to transaction, 'SOLUTION_MANAGER'. You can see the monitored system in the System Overview.
Below are the reference links:
Weblogs Related to Solution Manager
Hope this helps. Award with relevant points if my response is helpful.
Thank you.

SUP Monitoring with Solution Manager 7.1

We are currently on Solution Manager 7.1 SP6.
We currently have Sybase Unwired Platform system setup under managed system and
technical monitoring in Solution Manager. We have followed steps in note 1762741 but we are
receiving only high level alerts - sytem availability. No other alerts
are coming from any other SUP logs. Even though errors are in DB ,
server logs in SUP - we don't see any alerts.
All the Metrics are enabled. No errors in template.
Here's the example from SUP log files
E. 2013-03-06 14:09:12. <Main> [-10002] Consolidated database server or
ODBC error: ODBC: [Sybase][ODBC Driver][SQL Anywhere]Database server
not found (ODBC State = 08001, Native error code = -100)
E. 2013-03-06 14:09:12. <Main> [-10002] Consolidated database server or
ODBC error: ODBC: [Sybase][ODBC Driver][SQL Anywhere]Database server
not found (ODBC State = 08001, Native error code = -100)
E. 2013-03-06 14:09:14. <Main> [-10002] Consolidated database server or
ODBC error: ODBC: [Sybase][ODBC Driver][SQL Anywhere]Database server
not found (ODBC State = 08001, Native error code = -100)
E. 2013-03-06 14:09:28. <Main> [-10002] Consolidated database server or
ODBC error: ODBC: [Sybase][ODBC Driver][SQL Anywhere]Database server
not found (ODBC State = 08001, Native error code = -100)
E. 2013-03-06 14:09:28. <Main> [-10002] Consolidated database server or
ODBC error: ODBC: [Sybase][ODBC Driver][SQL Anywhere]Database server
not found (ODBC State = 08001, Native error code = -100)
E. 2013-03-06 14:09:28. <Main> [-10002] Consolidated database server or
ODBC error: ODBC: [Sybase][ODBC Driver][SQL Anywhere]Database server
not found (ODBC State = 08001, Native error code = -100)
I. 2013-03-06 14:09:42. <Main> Shutdown request from mlstop
I. 2013-03-06 14:09:42. <Main> MobiLink server shutting down
I. 2013-03-06 14:09:42. <Main> MobiLink server undergoing soft shutdown
I. 2013-03-06 14:09:42. <Main> No more new connections accepted.
Completing existing synchronizations
E. 2013-03-06 14:09:42. <Main> [-10002] Consolidated database server or
ODBC error: ODBC: [Sybase][ODBC Driver][SQL Anywhere]Database server
not found (ODBC State = 08001, Native error code = -100)
E. 2013-03-06 14:09:42. <Main> [-10002] Consolidated database server or
ODBC error: ODBC: [Sybase][ODBC Driver][SQL Anywhere]Database server
not found (ODBC State = 08001, Native error code = -100)
E. 2013-03-06 14:09:42. <Main> [-10002] Consolidated database server or
ODBC error: ODBC: [Sybase][ODBC Driver][SQL Anywhere]Database server
not found (ODBC State = 08001, Native error code = -100)
E. 2013-03-06 14:09:56. <Main> [-10002] Consolidated database server or
ODBC error: ODBC: [Sybase][ODBC Driver][SQL Anywhere]Database server
not found (ODBC State = 08001, Native error code = -100)
E. 2013-03-06 14:11:41. <Main> [-10124] The
Any help would be appreciated
Thanks

Hi Jyoti,
Are all your extractor working like they should?
Have you considered setting up log file monitoring by creating custom metrics and alerts?
Maybe this could help you bypass the issue.
Regards,
David

Basic Strategy / Best Practices for System Monitoring with Solution Manager

I am very new to SAP and the Basis group at my company. I will be working on a project to identify the best practices of System and Service level monitoring using Solution Manager. I have read a good amount about SAP Solution Manager and the concept of monitoring but need to begin mapping out a monitoring strategy.
We currently utilize the RZ20 transaction and basic CCMS monitors such as watching for update errors, availability, short dumps, etc.. What else should be monitored in order to proactively find possible issues. Are there any best practices you all have found when implimenting Monitoring for new solutions added to the SAP landscape.... what are common things we would want to monitor over say ERP, CRM, SRM, etc?
Thanks in advance for any comments or suggestions!

Hi Mike,
Did you try the following link ?
If not, it may be useful to some extent:
http://service.sap.com/bestpractices
---> Cross-Industry Packages ---> Best Practices for Solution Management
You have quite a few documents there - those on BPM may also cover Solution Monitoring aspects.
Best regards,
Srini
Edited by: Srinivasan Radhakrishnan on Jul 7, 2008 7:02 PM

EP Monitoring in Solution Manager

Dear Experts,
I would like to create a monitoring system using our solution manager. Therefore i would like to know the ways of doing it. I also would like to know what can be monitored in Solution manager for EP(enterprise portal). If possible i would like to monitor from Server to Application level, meaning to say i would like to know all the components that can be monitored using SolMan such as CPU utilization , disk space availability and from application point of view, i would like to view /receive alert that can show number user locked in EP an so on.
Our EP is running on version 7.0 and on SP15.
Regards
Ramesh

Hello Ramesh,
Please use the following links.
Monitoring with the SAP Solution Manager
http://help.sap.com/saphelp_nw04/helpdata/en/1a/40f83ee0e66856e10000000a114084/frameset.htm
SAP How-to Guides
https://www.sdn.sap.com/irj/sdn/howtoguides#section4
SAP NetWeaver 7.0
http://help.sap.com/nw70/
Also check service.sap.com/instguidesnw04s --> operations and look for Supp. Setup Guide - Solution Manager Diagnostics NW04 SPS 15
Hope the above links helps you.
Cheers,
Satish.
Edited by: Satish Arram on Oct 8, 2008 5:49 PM

Where do I set the polling frequency for Technical monitoring in Solution Manager 7.1 SP10 ??

Hi All,
I am customizing my technical monitoring templates and would like to know :
1. Where we can set the polling frequency for each metrics for triggering alerts through Technical monitoring in Solution Manager 7.1 SP10 ??
2. Is it like each time our threshold is breached, it will send an alert irrespective of polling frequency ??
I know the data collection interval time for each metrics in technical monitoring template but the as per my observation the polling frequency is different.
Need your guidance.
Regards,
Manish K

Hi Javier,
Refer to the documentation 'MAI Alert Consumer BAdI Interface' under
http://wiki.scn.sap.com/wiki/display/TechOps/Alert+Consumer+BAdI+Interface link for information on the input to the BAdI.
Kind regards,
Roland

Status : GREEN in MONITOR , YELLOW in MANAGE

Similar Messages

Maybe you are looking for