Status is not OK during IDS Update

Hi experts!
Just wondering if anyone has seen this error before. It's occuring during an AD reconciliation process. I've changed the timeout to 600 and cleared the provisioning queue using the SP, but still having trouble.
Messages     Warning     Status is not OK. Not legal to mark running in this state (2)
     Warning     MC told us to stop. Status:2 - STOPPING!
     Warning     Pass stopped by script
Any advice would be appreciated.
Thanks,
Matt

Hi Matt
We see the same error every now and then, but have found no explanation for it. We do not only see it when running AD jobs though. All we have been able to deduct from it is, that for some reason the MMC detects that something is not right and therefor orders the job to stop.
We have noticed though, that when our system is a bit stressed by a large number of provisionings, it occurs more often.
Kind regards
Heidi Kronvold

Similar Messages

IE 11 is not blocked during Automatic Update step.

Greetings.
I am experiencing something very strange with our Windows Deployment Servers.
I have WDS 2013 with AIK-8.1 combination server to do our machine deployment. Some of our machines need to have IE11 blocked from installation (for compatability issue). As in case with IE10 before we installed blocker from microsoft and then captured image.
Before capturing it it was tested by runnign auto update and ie 11 is not being installed.
Problem is during deployment during automatic update step (post application) the system picks up and installs ie11.
If I remove it by hand after installation is over and run windows update - it's not installed. If I disable auto-update step in installation - and run them by hand after - it's not installed.
Does anyone else experienced this scenario when blocker doesn't seem to have effect?

Hi,
According to FAQ here:
Internet Explorer 11 Blocker Toolkit: Frequently Asked Questions
http://technet.microsoft.com/en-us/ie/dn449234.aspx
What registry key is being used to disable delivery of Internet Explorer 10?
HKLM\SOFTWARE\Microsoft\Internet Explorer\Setup\10.0
When the installation is over and about to updating, cancel the update and check the registry key.
A value of 1 turns off the automatic delivery
of Internet Explorer 11 using Automatic Updates and turns off the Express install option.
Not providing a registry key, or using a value of anything other than 1,
lets the user install Internet Explorer 11 through Automatic Updates or a manual update.

Initial and expired password status is not checked during login for ITS Services

Dear all,
we have the following Basic problem or question regarding ITS-based ABAP Services provided via browser to internal and external customers:
The user call the ITS via URL "https://<host>:<port>/sap/bc/gui/sap/its/it13?sap-client=03&sap-language=en" his browser.
To access the Service a simple login Dialog appears for entering the credentials (UserID + Password).
The problem with this simple Dialog is that after resetting the users password this initial password status seems not to be checked here.
That means, that the user is able to login with this initial password and he is not forced to change the password.
In difference to this the intended behavior is provided for example when the SAP Standard ITS Service "webgui" is launched by the user:
The user launches der Service via URL "https://<host>:<port>/sap/bc/gui/sap/its/webgui?sap-client=03&sap-language=en"
In this case an additional first SAP WebAS login dialog appears where the users has to click on a Login-Button. This login button opens
another login dialog as a popup where the user is able to enter his credentials. But if the password has an initial status the user is
forced afterwards to change his password.
So the login behavior of the webgui Service is what we also want for the any other ITS Service. We've already compared the service properties and
settings (SICF), but we could not find any difference.
What can we do to change the login behavior for the ITS services ?
Thanks in advance for any kind of help !
Joerg

Hello Joerg,
Can you attach a screenshot of the "Logon Data" tab of the service 'it13' in transaction SICF?
In SICF - Tab: Error Pages -> Logon Errors
is 'SYSTEM Logon' selected for both the 'WEBGUI' service and 'IT13' service?
Regards,
Oisin

"pending updates" status does not go away after updating apps

When I download app updates to my computer (Windows 7) via iTunes and then sync to either my iphone or ipad (iOS 8.1.2), the updates actually install and the apps can then be opened. However the status of the applications in the App Store remains as "pending updates", and the badge notifications do not go away, even if I do a hard reboot. If I update over wifi, there is no issue. This is very annoying. Any suggestions?

Ok since my last post the notifications does not go away on its own. There has to be a way to remove that...

Numbers documents will not open it says "will not open during numbers update"

My numbers documents will not open. I keep getting a message telling me my documents will not open while numbers is updating. I have the latest numbers update already downloaded.

open the application "Launchpad":
then click, and hold, on the icon for "Numbers", once the icons start to shake, click the "X" in the top left to remove. Now click anywhere on the desktop to exit this remove/adjust mode.
Open the App Store (menu item " > App Store…")
now locate and install numbers

Delivery Status Notification not updating properly??????

Hi All,
Am working on in Java Mail API. My application mainly used for sending automated e-mails to Outlook and I have to update the status of that e-mail whether that e-mail has been sent or not, by using DSN(Delivery Status Notification). Here we are using SMTP exchange server and POP3.
Below lines explain you how we updating the status of that e-mail status:
When receipient got automated e-mails from our application, one Delivery Receipt will goes to our Outlook mailbox(which gets only the delivery,read receipt status e-mail from that receipients). After they read that e-mail one Read Receipt will goes to that same mail box. Here we have one Java program which reads that mailbox using POP3. While reading that mailbox we are updating that status of the e-mail using some logics.
Perfectly I can able to update these DSN status in report in my developement environment(here we are using our own configured exchage server). Am using RFC822 to do this.
following sample code snippet:
StringBuffer dsn = new StringBuffer();
dsn.append("SUCCESS,FAILURE,DELAY ORCPT=rfc822;");
dsn.append(SrvObj.getFromEmailId().trim());
props.put("mail.smtp.dsn.notify", dsn);
session = Session.getDefaultInstance(props, null);But while we are using that same in our live application its not worked,because this entire process goes to another exchange server.Sometimes we are getting delivery and read receipt status for some e-mail ids. But some e-mail ids we are not able to get that status. And we have enabled the delivery and read receipt options in all the outlook e-mail ids. Exchange server is also conf

Nothing guarantees that you'll get a DSN or MSN.
The server that ultimately delivers the email might not support DSNs or might be configured not to send them.
The mail reader used to read the message might not support MSNs or the user might choose not to allow them to be sent.
Unless you have control over all the mail servers and mail readers being used, you can't depend on getting DSNs or MSNs.

In updating my iPod to 6.1.2, I received an error during the update. Now, ipod is not rebooting. Has screen showing usb to Itunes picture.   Turning off and back on it goes back to this picture. I don't know how to reset so that I can restore my backup

In updating my iPod to 6.1.2, I received an error during the update. Now, my ipod is not rebooting. It continues to display a screen showing usb to Itunes picture.   Turning off and back on, it goes back to this picture. I don't know how to reset so that I can restore from my backup.
A similar thing happened when I updated the ios on my ipad. But, I was able to reboot, and then restore from backup.   How can I get my ipod to reboot and allow restore when it is not even recognized as I reconnect to my computer?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My new ipad froze during software update thru itunes. The normal reset tructions do not work and itunes on my pc no longer recognizes my ipad. how do i get past this issue?

My new IPAD froze during software update thru itunes on my winows PC. The normal reset instructions holding the home and power buttons do not work. Itunes no longer recognizes my IPAD. What can i do?

See here -
Recovery Mode
http://support.apple.com/kb/HT1808
iPad not showing up in iTunes on a PC
http://www.apple.com/support/ipad/assistant/itunes/
iPad not showing up on a Mac
http://support.apple.com/kb/TS1591

Ok guys i need help my ipod touch froze during an update now i put it inot the recovery mode or dfu and it will not reset itself at all it comes up with an error code and says this ipod cannot reset now does anyone have any ideas of what to do with it

ok guys i need help anyone with my ipod it froze during an update now it will not work at all i ahve put it into the recovery mode or dfu and it will not reset it self it comes up with an error message 1603 the number is and says the ipod cannot be reset anyone please help me i have tryed everything googled you tubed everything

Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Error 1603
Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.

HT4623 During my update to the new operating system I am unable to get past Rescue EMail. I tried not putting in another e-mail as it says it is optional - that did nto work. I entered a Rescue E-Mail and it will not allow me to go to the next step. Help

During my update to the new operationg system I am unable to get past the Restore E-Mail. I first chose not to have an "optional" restore e-mail and was unable to get past this section. I then entered an alternate e-mail with the same results. I am unable to get past this section after I push the Next symbol. HELP!

I am having the same problem. I think I saw something about VPN and not being able to communicate with Apple web site. Do you have your protected company email on your phone?

Inspection Lot Status (CROK)not updating for Certificate Reciept

Hi
I want to inspect vendor materials on the basis of thier Quality certificates
1) Config Set up:
a) Certificate type :YA72
Cert for each PO item :checked
Certificate Check reqd: :Checked
Enhance cert processing: Checked
b) Control key :0005 ( Delivery release ,Certificate)
2) Material Master (QM View)
    QM Procurement : Checked
   Control Key :0005
   Certificate Type :YA72
3) Goods Recipt
    MIGO < Purchase Data<Cert Reciept :Yes
    Inspection lot is created
Question : Inspection lot status is not updating for Certificate Recived or not
                  My understanding is Inspection lot status should be :CROK -Certificate Recieved
CTCM-Certificate Missing
Pls correct my understanding in case i am missing something
Thanks in advance

Is the status in the GR document have the cert field set as 5?
Since you set the "certificate check required" you must do an explicit check of the cert. I included below the help screen from this indicator in SPRO.
You should be able to review the status of your cert in transaction QC53.
FF
Explicit Inspection of GR Certificate Necessary
If you set this indicator, at goods receipt the system will generally perform as described in the field "Control without certificate".
This means that even if you confirm the certificate receipt at goods receipt, and thereby set the status "2 - Certificate received", the system will still perform as specified in the field "control without certificate". See Control without certificate.
You must explicitly check the content of the certificate recieved at goods receipt and set the status "5 - Certificate filed and inspected ", before, for example, the inspection lot status will be set to CROK.
You can confirm that you have checked the content of the certificate in the certificate transaction or when making the usage decision.
Note
If you have set the indicator and chosen an unsuitable setting in the field "Control without certificate", the goods receipt can be generally blocked.
This security function is generally used at electronic certificate receipt to check the accuracy of the certificate contents.

Status is not updated from delivery to sales order item.

Dear Folks,
One user created sales order with 10 line items and he created delivery and later he deleted line item 30 in that delivery document and with remaining 9 line item he done the PGI & Billing.Here what is the problem is the deleted line item in sales order status showing as completed and delivered quatity showing as 10.Status is not updated from delivery to sales order item.Please let me know how to resolve this?
Thanks & Regards,
murali.

Dear Murali,
Please go to VTLA transaction then select your delivery and order types after that go in to the details of the item level settings here you check field called Update document flow under Control data tab.
I hope it will help you,
Regards,
Murali.

HT1369 During the updation of 10.7 version of Itunes on my iphone 4s, my phone has gone into recovery mode & is not showing up in i Tunes nor in my computer (windows xp). What shall i do so that my phone gets connected & running??

During the updation of 10.7 version of Itunes on my iphone 4s, my phone has gone into recovery mode & is not showing up in i Tunes nor in my computer (windows xp). What shall i do so that my phone gets connected & running??

Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
Resolve specific iTunes update and restore errors

Requisition status was not updated

Hello people,
we have a requisition with only one item. We are asking quantity = 4.
For this requisition were opened 4 RFQ. So the requisition Processing Status is "RFQ created".
After this, it was created an order with 4 lines (each one with PO Quantity = 1). In the first line we have the RFQ and the requisition numbers above.
But the requisition Processing Status is "RFQ created" yet.
Why the status was not updated? And, how can I update it?
I tried to run the report RM06HL04, but it didn´t update it.
Thank you!

Have you check your PO,if its still in Held status.

WIP status (RESA) not updated for process order with co-product

Hi,
We are facing the scenario below, please confirm whether item 2 behaviour is standard SAP.
1. Process order with settlement rule MAT - after WIP calculated, status RESA is updated & FI document it posted.
2. Process order with settlement rule OIT (co-product) - after WIP calculated, status RESA not updated & FI document posted.
Thank you.

Self found answer

Status is not OK during IDS Update

Similar Messages

Maybe you are looking for