Status meanings

Hi all,
what is the meaning of following status in Pi monitoring.
Released for Processing (WS)
Transfer to Process Engine
Processed Successfully (WS)
Waiting for Transport Confirmation (WS)
System Error (WS)
030 (no short text - missing translation)
Application Error (WS)
118 (no short text - missing translation)
Manually Cancelled (WS)
Manually Changed (WS)
Please help me..
Regards
XIuser

Hi
Released for Processing (WS) - Message is released from queue for further processing
Transfer to Process Engine - Message transfer to BPE for futther Processing In Case of BPM
Processed Successfully (WS) - Message has been successfully processed. You can check in SXMB_MONI
System Error (WS) - message has undergone system error. ie could not be deliver to Reciever system coz of some error
Application Error (WS) - messgae canot be processed successfully by the Receiver application.
Manually Cancelled (WS) - messgaes in error can be manually cancelled in SXMB_MONI
Regards,
Deepak.

Similar Messages

Status issues

i need some help here
in this instance someone's on an iphone 5 i believe and im on my pc we're both signed in green available and then a little after them signing out i saw the sign in baloon pop up but still not showing the green colour so guessed they was invisible, soon after they go to away status then the away status signed in and out again multiple times, this happened when i too went from available to invisible as if they were copying me playing games, i questioned them on this and they tell me it hadto do with talking to other contacts closing them and closing other tabs, at a guess.
i think i am being lied to so need some info on this to save me more arguing...
thanks

I am so sorry Claudios but this article doesn't solve the problem because after 5 mins the status will change to be away instead of available .. but think of this scenarioa .. I downloaded skype on my smart phone and then I didn't use skype for 5 mins and my status changed to be away instead of available but after 10 mins I didn't have network coverage for any reason or my battery is dead so I am not connected to the internet but my status is still away and it is very confusing as my friend s will have the intuition that I am reachable while I am not and there are lots of scenarios like this for example I installed skype on my smart phone and signed in with my account and or any reason I uninstalled the app without signing out so I will remain away forever and my proposed solution to this problem is
1-available : means that I am actually using skype app on in the last 5 mins
2- away : means that I am having a device or more actually connected to the internet but I haven't opened it in the last 5 mins
3-offline: means that I have no device connected to the internet at this time ( or just I am invisible )
and as I saw that you have said before that checking my account whether it is connected to internet or not will drain the battery so I have started to test it by installing both skype and another voip app on the same smart phone and charge that phone to be 100 % and left both apps working on the background while the other app show if the other person is actually online ( connected to the internet ) or last online xx mins ago ( which means that he hasn't been connected to the internet sice xx am ) and waited till the battery became 15 % only then checked if that app consumed more battery than skype or not but the result is that app didn't consume more battery at all it almost drained the same amount of skype and you can make this exiperement by yourself you will get the same result !!! so please make tha status meaningful instead being always away ... I really appreciate your efforts and replies claudious .. Thanks alot Claudious

Workflow in starting or stopping status

Hi All
iam in ebs r12 12.1.3 db 11gr2 11.2.0.3
when stop or start workflow notification. i have status STARTING OR STOPPING.
I did shutdown application , bounced database ran cmclean.sql
restart the database and application and still have the same error in the status.
Please advice what else i can check.
Thanks in advance.
COMPONENT_NAME COM_STAT
ECX Inbound Agent Listener STARTING
ECX Transaction Agent Listener STARTING
Workflow Deferred Agent Listener STARTING
Workflow Deferred Notification Agent Listener STARTING
Workflow Error Agent Listener STARTING
Workflow Inbound Notifications Agent Listener STARTING
Workflow Notification Mailer STOPPING
WF_JMS_IN Listener(M4U) STARTING
Web Services OUT Agent STARTING
Web Services IN Agent STARTING
Workflow Java Deferred Agent Listener STARTING
COMPONENT_NAME COM_STAT
Workflow Java Error Agent Listener STARTING
Workflow Inbound JMS Agent Listener STARTING
Using these notes and test the SMTP the mail was sent fine.
Workflow Notification Mailer Remains in Starting Status [ID 1400353.1]
How to Perform a Meaningful SMTP Telnet Test to Troubleshoot Java Mailer For Sending Email Notifications [ID 753845.1]
here is a portion of the log.
[May 19, 2012 12:39:50 AM PDT]:1337413190218:-1:-1:abc1-ap1.test.com:10.10.6.200:-1:-1:1:20420:SYSADMIN(0):-1:Thread[ComponentMonitor,5,main]:1627058645:69856:1337410068910:2:PROCEDURE:[fnd.wf.apps.WorkflowContext]:oracle.apps.fnd.wf.apps.WorkflowContext.getJDBCConnection: END: returning oracle.jdbc.driver.T4CConnection@1700391
[May 19, 2012 12:40:50 AM PDT]:1337413250224:-1:-1:abc1-ap1.test.com:10.10.6.200:-1:-1:1:20420:SYSADMIN(0):-1:Thread[ComponentMonitor,5,main]:1627058645:69856:1337410068910:2:PROCEDURE:[fnd.wf.apps.WorkflowContext]:oracle.apps.fnd.wf.apps.WorkflowContext.getJDBCConnection(): BEGIN/END
[May 19, 2012 12:40:50 AM PDT]:1337413250224:-1:-1:abc1-ap1.test.com:10.10.6.200:-1:-1:1:20420:SYSADMIN(0):-1:Thread[ComponentMonitor,5,main]:1627058645:69856:1337410068910:2:PROCEDURE:[fnd.wf.apps.WorkflowContext]:oracle.apps.fnd.wf.apps.WorkflowContext.getJDBCConnection(null,0x119e583,false,false,false): : BEGIN
[May 19, 2012 12:40:50 AM PDT]:1337413250224:-1:-1:abc1-ap1.test.com:10.10.6.200:-1:-1:1:20420:SYSADMIN(0):-1:Thread[ComponentMonitor,5,main]:1627058645:69856:1337410068910:2:PROCEDURE:[fnd.wf.apps.WorkflowContext]:oracle.apps.fnd.wf.apps.WorkflowContext.getJDBCConnection: END: returning oracle.jdbc.driver.T4CConnection@1700391
[May 19, 2012 12:41:50 AM PDT]:1337413310231:-1:-1:abc1-ap1.test.com:10.10.6.200:-1:-1:1:20420:SYSADMIN(0):-1:Thread[ComponentMonitor,5,main]:1627058645:69856:1337410068910:2:PROCEDURE:[fnd.wf.apps.WorkflowContext]:oracle.apps.fnd.wf.apps.WorkflowContext.getJDBCConnection(): BEGIN/END
[May 19, 2012 12:41:50 AM PDT]:1337413310231:-1:-1:abc1-ap1.test.com:10.10.6.200:-1:-1:1:20420:SYSADMIN(0):-1:Thread[ComponentMonitor,5,main]:1627058645:69856:1337410068910:2:PROCEDURE:[fnd.wf.apps.WorkflowContext]:oracle.apps.fnd.wf.apps.WorkflowContext.getJDBCConnection(null,0x119e583,false,false,false): : BEGIN
[May 19, 2012 12:41:50 AM PDT]:1337413310231:-1:-1:abc1-ap1.test.com:10.10.6.200:-1:-1:1:20420:SYSADMIN(0):-1:Thread[ComponentMonitor,5,main]:1627058645:69856:1337410068910:2:PROCEDURE:[fnd.wf.apps.WorkflowContext]:oracle.apps.fnd.wf.apps.WorkflowContext.getJDBCConnection: END: returning oracle.jdbc.driver.T4CConnection@1700391
[May 19, 2012 12:42:36 AM PDT]:1337413356004:-1:-1:abc1-ap1.test.com:10.10.6.200:-1:-1:-1:-1:ANONYMOUS(-1):-1:Thread[Cache Stats Writer,5,main]:1627058645:69856:1337410355410:4:PROCEDURE:[fnd.common.WebAppsContext]:oracle.apps.fnd.common.WebAppsContext.getJDBCConnection(): BEGIN/END
[May 19, 2012 12:42:36 AM PDT]:1337413356004:-1:-1:abc1-ap1.test.com:10.10.6.200:-1:-1:-1:-1:ANONYMOUS(-1):-1:Thread[Cache Stats Writer,5,main]:1627058645:69856:1337410355410:4:PROCEDURE:[fnd.common.WebAppsContext]:oracle.apps.fnd.common.WebAppsContext.getJDBCConnection(null,0x25491d,false,false,false): : BEGIN
[May 19, 2012 12:42:36 AM PDT]:1337413356004:-1:-1:abc1-ap1.test.com:10.10.6.200:-1:-1:-1:-1:ANONYMOUS(-1):-1:Thread[Cache Stats Writer,5,main]:1627058645:69856:1337410355410:4:PROCEDURE:[fnd.common.WebAppsContext]:oracle.apps.fnd.common.WebAppsContext.getPrivateConnectionFinal(null,0x25491d,true,false,false): : BEGIN
[May 19, 2012 12:42:36 AM PDT]:1337413356004:-1:-1:abc1-ap1.test.com:10.10.6.200:-1:-1:-1:-1:ANONYMOUS(-1):-1:Thread[Cache Stats Writer,5,main]:1627058645:69856:1337410355410:4:PROCEDURE:[fnd.common.WebAppsContext]:oracle.apps.fnd.common.WebAppsContext.borrowConnection(null,0x25491d,false): : BEGIN
[May 19, 2012 12:42:36 AM PDT]:1337413356005:-1:-1:abc1-ap1.test.com:10.10.6.200:-1:-1:-1:-1:ANONYMOUS(-1):-1:Thread[Cache Stats
Edited by: user3715462 on May 21, 2012 10:46 AM

it worked before but just had problem today.. i did not change anything.Please set the Workflow Mailer Log Level to Statement and restart the Workflow Mailer and check the log files then.
Unable to Connect to Mail Store in Workflow Notification Mailer Logs [ID 741352.1]
Troubleshooting Workflow Java Notification Mailer - Technical Reference [ID 1191125.1]
Also, please run workflow diagnostic scripts as per (Oracle Workflow Release 12 Diagnostics [ID 469822.1]).
Thanks,
Hussein

IDOC STATUS 29 to 68

Hi all,
Customer request is change idoc status from 29 to 68.
68 = no further processing inbound side
31 = no further processing outbound side
if i change status of idoc from 29 to 68 using Fn module IDOC_STATUS_WRITE_TO_DATABASE
Data of idoc is vanishing.
I observed that if i change status of idoc from 29 to 31 then there is no data loss in idoc with same Fn module.
Is there any way to change idoc status from 29 to 68 without losing the Idoc data.
anyway for both 68 & 31 meanings are same , but customer requires 29 to 68.
if u have any idea please suggest me.

Hi Suneel,
If the program does't exits then try this ...
DATA: L_EDIDC_TAB       LIKE EDIDC      OCCURS 1 WITH HEADER LINE,
      L_IDOC_STATUS_TAB LIKE BDIDOCSTAT OCCURS 1 WITH HEADERLINE,
      L_IDOC_CONTROL    LIKE EDIDC.
    L_IDOC_STATUS_TAB-DOCNUM = <your IDoc number>.
    L_IDOC_STATUS_TAB-STATUS = '68'.
    APPEND L_IDOC_STATUS_TAB.
    CALL FUNCTION 'IDOC_STATUS_WRITE_TO_DATABASE'
         EXPORTING
              IDOC_NUMBER               = L_EDIDC_TAB-DOCNUM
         IMPORTING
              IDOC_CONTROL              = L_IDOC_CONTROL
         TABLES
              IDOC_STATUS               = L_IDOC_STATUS_TAB
         EXCEPTIONS
              IDOC_FOREIGN_LOCK         = 1
              IDOC_NOT_FOUND            = 2
              IDOC_STATUS_RECORDS_EMPTY = 3
              IDOC_STATUS_INVALID       = 4
              DB_ERROR                  = 5
              OTHERS                    = 6.
Regards,
Ferry Lianto

Updating the Line number on status bar.

Hi all,
I have developed an editor using swing, however I have used the JTextpane class to display the text. I had did of trouble with features such as go to line as this class does not support methods such as getLineCount in the JTextArea class. However I over came this by writing the method shown below.
The problem is that I want to show the current line number on the status bar. When do I call this method? After every '\n'?
The setLine Number method is below.
Thanks for your help
Ciara
public void setLineNumber(int num) {
int lineNum = 1;
int lastNewline = 0;
char text[] = editor.getText().toCharArray();
if (num < 1)
return;
if (num == 1) {
editor.setCaretPosition(0);
return;
int i;
for (i = 0; i < text.length; i++) {
     if (text[i] == '\n') {
     lastNewline = i;
     lineNum++;
     if (num == lineNum) {
     editor.requestFocus();
     editor.setCaretPosition(lastNewline + 1);
     return;
}

Perhaps extending a PlainDocument is better, if line
numbers are meaningful for your application.
About your method, mind that getText can be quite dear,
so it is better not to call it if you don't need it.
For a more efficient alternative, look at Document.getText(int offset, int length, Segment txt)It uses a Segment (un unguarded string) pointing directly
into the document, which you can use much like a char
array.
As to your question, I would define a CaretListener
so as to update the status bar when the caret moves.

SCCM 2007 component status critical

Hi, i am using sccm 2007 sp1as a primary site, sql 2005 wit cu4, wsus 3.0, on same server 2008 sp2. Few days ago i came to know that sccm console is not opening well so i checked the logs and found at sql database is showqing in suspact mode. So i
used some sql alter commands that i have already used for same issues i faced in past. But that query only changed the mode to emergency. Than i googled alot to make the database online but got no result. Then i detached the database and attached it with old
previous backuped database. After server restart sccm console is opening well even the reporting is also working well. There was issue with MP but reinstated MP again and now its also working fine with status code 200. Now the big issue is with the component
status is not getting updated and showing critical. I have tried :-
Reseting count for errors.
MP and SUP reinstallation.
Checked sql and dcom permission as sccmadmin have all admin and sysadmin rights.
Given again permission on system management container.
Wsus reinstalled and synced properly with upstream server.
But still component status is not updating. Everything is looking fine but unable to understand what i am left with. Please help.

Again the ONLY support report is to use the CM07 restore procedures. Will everything work after your restore? Who know as there is no way to know what the problem was/is. There
will be gotcha when you restore your CM07 site and they sometime will fix themselves and other times it is just faster to force them to work. As such, I ALWAYS recommend to my clients that if they ever have to restore their CM environment that they contact
CSS directly for support. This way CSS can ensure that the site is healthy and working correctly. There is No way to do that within the forums in any meaningful way.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Invitation Status problems

I have a few problems with the status of events within my calendars. Firstly, when I create a new event with another attendee, then according to the help document named "Understanding symbols in iCal", after the email invitation has been sent the status symbol should change as stated:
"A diagonal upward arrow means "sent."
A diagonal upward arrow appears in the attendees list in the Info drawer next to people who have been invited to an event but have not yet responded....."
However I don't see that change reflected, what I see is a gray line a little like a tilde "~" only less curvy. The email has definitely been sent at this point. This status symbol is not defined in the above mentioned help document. When the email is responded to by the recipient, then again according to the above support document, I should see a new symbol with one of the following meanings:
A diagonal downward arrow means "received."
An "x" (RED) means "declined."
A checkmark (GREEN) means "accepted."
A question mark (BLUE) means "tentative."
However, what I am then getting is a question mark, but it's a gray one, not Blue. The email response has come from an Outlook client which has provided the following .ics file contents (certain details deliberately obscured but are correct in the file):
BEGIN:VCALENDAR
PRODID:-//Microsoft Corporation//Outlook 11.0 MIMEDIR//EN
VERSION:2.0
METHOD:REPLY
BEGIN:VEVENT
ORGANIZER:MAILTO:[email protected]
DTSTART:20071130T200000Z
DTEND:20071201T000000Z
TRANSP:OPAQUE
SEQUENCE:5
UID:394680C7-974F-4728-B31F-99810F0208CA
DTSTAMP:20071120T221717Z
DESCRIPTION:Yes indeed\n
SUMMARY:Accepted: Xmas Bash
PRIORITY:5
X-MICROSOFT-CDO-IMPORTANCE:1
CLASS:PUBLIC
ATTENDEE;PARTSTAT=ACCEPTED:MAILTO:[email protected]
END:VEVENT
END:VCALENDAR
From what googling around I have done, this seems perfectly valid, but it does not seem to be processing it correctly. As it changes from the "~" to a "?" this would seem to indicate that it realises it has received a response, but cannot process it. To check, I looked at one of my acceptances to an event to see if it matches, and bar a couple of extra lines in both files, the syntax looks consistent. Even so, I tried saving the .ics file and editing it to reflect some of the different date that is created in a genuine iCal reply as opposed to the Outlook ones, lines such as CREATED:20071031T212254Z, and "ATTENDEE;CUTYPE=INDIVIDUAL;PARTSTAT=ACCEPTED;ROLE=REQ-PARTICIPANT:MAILTO:ka..@ be...n.co.uk but it makes no difference.
Does anyone else have this, and know how to fix it?
Many thanks for your patience reading through the above

Slight edit to the above, after some more testing, it appears that the return acceptance isn't being processed at all, and in fact the "~" only changes to a "?" if I update the event and send out a new invite. This kind of implies that event replies are broken in Outlook, but I was hoping all that was behind us now as inviting people to events works both ways between iCal and Outlook, seems the acceptances only work one way though. I'm sure this is to do with the .ics file contents, and if I only knew what was wrong I would be happy to fix it all manually in the meantime.

WBS user status change doesn't trigger changed by update...

Hi all,
I've inherited a program that is used to programmatically change the system and user status of WBS elements. The user has reported an issue where the Change By and Changed On values displayed on the Admin tab of tcode CJ20N are not updated after the user status for a specific WBS has been programmatically updated. The system status update works fine...both fields on the admin tab are updated. I searched the forum and couldn't find anything that speaks specifically to this problem...does anyone have any thoughts?
Thanks in advance.

Yeah, that makes sense.
I'm thinking now that if I create a new version in the web gallery and crop it just for the web export the app will probably re-send that image out to the web site because it treats the new version as a different image. Since the new version really doesn't take up any meaningful hard drive space this wouldn't be a deal-breaker, but I would have to remember to NOT delete that version or change the crop ratio before uploading the gallery again.

SCCM 2007 BDP Status Exact Meaning

What are exact meaning of BDP Status below (0,1,2,3,4)
BDP_Status
When
Status = 0
Then 'Healthy'
   When
Status = 1
Then 'Warning'
   When
Status = 2
AND AvailabilityState = 3
Then 'Critical'
   When
Status = 2
AND AvailabilityState = 4
Then 'Very_Critical'
Fazal(MCTS)

Thanks For the Response , sorry for unclear.
Got From our SCCM SQL DB , [dbo].[vSummarizer_SiteSystem] view.
select * from [dbo].[vSummarizer_SiteSystem] then AvailabilityState filed (Column) shows with 0,1,2,3,4 integer result. (above is our query part which we are getting for finding BDP Issue)
and i need to what are those value and meanings ( 0,1,3,4)
Fazal(MCTS)

Workflow Notification Mailer stays on Stopping Status

Hi all,
I configured all the settings for Workflow Notification Mailer all the steps were successful. After completing the configuration I tried restarting Workflow notification mailer but it stays in "Stopping" status for a long time. In Workflow Mailer Service Container all the services are already activated. My Apps Version is 11.5.9. If any body faced same kind of a issue please help me out to sort out the issue.
Thanks,

Hi,
Can you find any errors in Workflow log file?
Please go through the following documents, it should be helpful in troubleshooting the issue.
Note: 564394.1 - How to Troubleshoot when the Workflow Services Go Down
Note: 753845.1 - How to Perform a Meaningful SMTP Telnet Test to Troubleshoot Java Mailer Issues
Regards,
Hussein

Can you tel me the exact status values for TBTCO table

Hi Experts,
Can you help me any one to know about "Status" field in TBTCO table.
what is the meanings of this status values.
1.P.
2.S.
3.F.
4.R
5.Y
6.A.
7.Z
Can you tell me any function module to find status for the program and for the jobname.
Thanks.
Sailu

Hi,
Just used the where used list and found INCLUDE LBTCHDEF.
Check it. seems clear
btc_running       LIKE tbtco-status VALUE 'R',
btc_ready         LIKE tbtco-status VALUE 'Y',
btc_scheduled     LIKE tbtco-status VALUE 'P',
btc_intercepted   TYPE btcstatus VALUE btc_scheduled,
btc_released      LIKE tbtco-status VALUE 'S',
btc_aborted       LIKE tbtco-status VALUE 'A',
btc_finished      LIKE tbtco-status VALUE 'F',
btc_put_active    LIKE tbtco-status VALUE 'Z',
btc_unknown_state LIKE tbtco-status VALUE 'X'.
Regards

Status Light

I purchased an ATV 160GB last year 04/14/2008. It's been working flawlessly, and still working great, since I set it up. I just found out that the status light has meanings. The problem is, the LED light is not on. I recall seeing a light when I first had it going, then I never saw it again. Since everything was working great, I thought not having a light on was normal. I think something with the connection to the light went wrong. Should I live with this or get it fixed? Is there someplace else where I can get its status if I really need to know it?

The little white light has faded on some of my tv's (some haven't and some can't even be seen in the dark) when the unit is operating normally. It still seems to manage to work though when it is trying to tell me something. Are you sure your status light is not working at all or could it just be faded during normal operation.

Mapping of status codes to text

I'd postponded this question because I thought I must have overlooked something. But I don't seem to be able to locate anything that deal with it.
I have a lot of metrics that return a integer value representing a certain status name. My MIB files map these numbers to text that explains the code. But the device will only respond with the code itself. How can I create that same map in the target metadata? So when I get code 1, I get a text string "Working" printed. And if the code is 2, I get "Error, no power", and 3 "Error, battery dead" etc. etc. A traditional switch statement.
COMPUTE_EXPR might help, but I don't know what functions it can handle. And I can't seem to find something like this in the samples? Is COMPUTE_EXPR documented somewhere?

You can add a COMPUTE_EXPR (as specified below) to do the mapping [where 'Last_Run_Outcome_Raw' is the raw/int value retrieved from the target, which needs to be mapped to a meaningful string value]
COMPUTE_EXPR="(Last_Run_Outcome_Raw == '0' ? 'Failed' : (Last_Run_Outcome_Raw == '1' ? 'Succeeded' : (Last_Run_Outcome_Raw == '2' ? 'Canceled' : (Last_Run_Outcome_Raw == '5' ? 'Unknown' : Last_Run_Outcome_Raw))))
There are various other uages of writing compute_expression, e.g., comparing, finding sub-set, etc. I will try to hunt out a related document and send it across.

BT Speedtester: HTTP Status 404 error message

This is a problem extracted from the thread below as it is a separate issue
http://community.bt.com/t5/BT-Infinity/Bt-s-speed-tester/td-p/405819
When trying to use the new Speedtester I get the message below in the banner line.
HTTP Status 404 - /PerformanceTester/applet/progressbar/progressbar.html
If I ignore the message and carry on I get a TEST Error message before any meaningful data is displayed.
The following is general information about the problem.
1.The PC involved is running Windows XP and Internet Explorer 8
2. The problem did not occur with the previous version of the speed tester.
3. Java does not start as it used to.
4. The Speedtester works OK using Firefox on the same PC.
5. When running the Speedtester on a different PC with IE 7 I get the following screen
6. Based on the above it looks as if this check is failing with IE 8 on the original PC but other than the 404 message there is no other indication of this including in the event logs in the PC.
7. At least one other contributor is having this problem.
8. It is not a JAVA problem otherwise Firefox would not work.
9. IE 8 is OK for most other activities so it appears to be an IE8 / New Speedtester problem.
Three final questions
a) Is anyone else having this problem ?
b) Has anyone got a suggestion for the cause?
c) Has anyone got a cure that involves XP and IE8 ? (I already have a work around)
Solved!
Go to Solution.

I have just discovered this thread
http://community.bt.com/t5/BB-Speed-Connection-Issues/bt-speedtest/td-p/409019
Based on the information there I have created a new favorite
http://www.speedtester.bt.com/ that as far as I can see is identical to my previous favorite.
The new one works !!!
The old one still gives the previous 404 error !!!

Office Jet 5740 Printer Status Report

What are the meanings of Items 25,26,27,28,29,30,31, 32 , 45,46,47 in the Printer Status Report ?

Greetings , I would be more than happy to help you by explaining the lines on your printer status report.
Since every printer report is slightly different for each model, just so I can be exact, would it be possible for you to scan the page and send it to me in a private message? On most reports, most of the line numbers you have listed are related to the fax setup. Since I don't have your exact printout, I used this example report as reference from this document; Officejet 5740 - An 'Out of Paper' Message.
The lines on this report are showing: 25= Fax Forwarding ... Forwards your fax to another number (just like call forwarding) 26= Auto Answer ... Whether or not the printer automatically answers the incoming call 27= Rings to Answer ... The number of rings the fax machine waits to answer the incoming call 28= Distictive Ring ... A distinctive ring service allows your phone system to add another phone number to the same phone line. When a call comes in on the distinctive ring number, the telephone rings with a ring sequence that is different than the standard ring tone. (Note: This is a service setup through your phone provider) 29= (ECM) Error Correction Mode ... I recommend reading this Enabling or Disabling Error Correction Mode (ECM) 30= Fax to PC ... Settings related to receiving you faxes digitally on your computer 31= Faxes Sent ... total faxes sent from your printer 32= Faxes Received ... total faxes received on your printer ** You can learn more about your fax setup here; HP Printers - Sending and Receiving Faxes, or from the HP Officejet 5740 e-All-in-One series User Guide. Lines 45,46,47 - I'm unsure because the example I have is not showing these lines. Again, if you could scan your report and send it to me in a private message I should be able to clarify those final lines. Here's how to send a private message if you need it. I look forward to hearing from you! Thanks,

Status meanings

Similar Messages

Maybe you are looking for