Status not changing to Available after sleep?

Just recently got my wife a MacBook (white). I got her setup with iChat and it's working well except for the status. When she wakes it from sleep, it logs her back into iChat, but keeps a status of "Away". I did change the option in Prefs to "Set me as Available" when coming back or something like that.
What am I doing wrong? Anyone?

Hi,
In the General Section of the iChat Preferences you can set one of three option on "Returning to my Computer" which normally refers to Waking from Sleep or coming back from the Screen saver.
One of the options as you say, is to set the Status to Available (If it was set to Away before).
Like you I find it does not work.
I have also tried the sub-options in the Menu Bar Icon bit about Logging out of AIM if I quit (Which Sleep will be considered as the same thing).
Basically I was trying to find if this setting over-rides the lower one.
I Set it to At User Login set my Status to Available which I know works on Start up. But from Sleep this does not over-ride the Status Message when it is set to Away.
If the above setting is not set the same thing happens (it stays as Away when I wake the computer.
Whether I have it set to Set Me as Off Line when I Quit (paraphrased) or not also does not change the Status Message on waking the computer.
Not even turning Off Auto-Reply with Away message made any difference.
That leaves two things.
Does this setting have anything to do with Sleep of Screen Saver ? (is it something else ?)
Is it a bug ?
iChat help has this on Setting the Status.
If you are away from your computer for a time, your status is displayed as “Idle.” Messages that arrive while you’re away wait on your screen
This implies the former. i.e. if you have set the Status as Away and physically leave the computer and the Idle time kicks in before Sleep or Screen Saver then iChat will change you Status to Idle (Although it can not actually display this varient of Idle).
Also there is not setting if I am Idle change my status to Away either.
The Idle time is preset at 600 seconds (10 mins)
My Screen Saver kicks in earlier than this and may over-ride this.
Right this minute I do not have 10 ins to do something else or wait until the Idle time kicks in.
Summary.
This issue seems to be something based on what Away means in this context.
I suggest it refers to the Idle time (which is hidden from your Buddies if you have set Away as the Status).
Hope this helps.
9:56 PM Wednesday; February 18, 2009

Similar Messages

Production order status was not changed to 'CNF' after final confirmation.

Hi guru.
I experienced very special case that production order status was not changed to CNF after final confirmation.
I did final confirmation and canceled confirmation. (CNF -> REL)
And I did final confirmation again because of fixing activity quantity.
the strange thing is that production order status wasn't changed from REL to CNF.
I did confirmation again with 0 activity, thereby I solved this problem
BUT i don't know why this case happened.
Please, explain the reason.
Thanks.

Hi,
As per my observation, their is not any change in the status of the order REL with confirmation CNF, instead of this, it has change from CRTD & then to TECO.
Sequence of the status of the order as below
1) CRTD MANC NMAT SETC
2) REL NMAT SETC - Changes from CRTD to REL after releasing of the order
3) REL CNF PRC CSER ERTR OPGN SETC - After confirmation, it updated after the order REL status.
Rgd,
Chetan

Status Profile : Status not changing in CRM

Hi Gurus
Created order with header status as as " In process" , item status is defaulted to " open" and order replicatd to ECC , billed aswell . But when I checked in CRM still status not changing to completed but retains with In process at header level & open at item level.
I would expect order status should be completed at header level & Item level.
Is there any thing wrong with status profile settings at header & Item level? , I have created status profiles with following settings.
I have copied standard status profile " CRMORDER" and assigned to trasaction type and made following settings:
Under Open :   following transactional contorl selected
To be distributed   : Selected options "Forbidden " & No active
Under In process:
In process : Selected options " Allowed " & Set
Undo Rejection : Selected options " No infulence " & Set
Under Completed:
Complete : Selected options " Allow " & Set
Created status profile for Item i.e. copied standard CRMORD_i and made following changes:
Under Open : No transaction control selected
Under In Process :
Edit : Seleted options " No influence" & Set
Undo Rejection : Selected options " No Influence & Set
Under Completed:
Completed : Selected options " Allowed & Set"
Rejected : Selected options " Allowed & Set"
Actually we are using material which is non deliverable but should be billed, while creating order , I can see staus at item level is open and remains open even after billed in ECC. And also we are mapping Business activity reasons to order reasons in ECC.
Is any thing i am selecting wrong options in status profile at header level & item level? Much appricieated for solution.
Thanks
shash

Hi Gurus
Created order with header status as as " In process" , item status is defaulted to " open" and order replicatd to ECC , billed aswell . But when I checked in CRM still status not changing to completed but retains with In process at header level & open at item level.
I would expect order status should be completed at header level & Item level.
Is there any thing wrong with status profile settings at header & Item level? , I have created status profiles with following settings.
I have copied standard status profile " CRMORDER" and assigned to trasaction type and made following settings:
Under Open :   following transactional contorl selected
To be distributed   : Selected options "Forbidden " & No active
Under In process:
In process : Selected options " Allowed " & Set
Undo Rejection : Selected options " No infulence " & Set
Under Completed:
Complete : Selected options " Allow " & Set
Created status profile for Item i.e. copied standard CRMORD_i and made following changes:
Under Open : No transaction control selected
Under In Process :
Edit : Seleted options " No influence" & Set
Undo Rejection : Selected options " No Influence & Set
Under Completed:
Completed : Selected options " Allowed & Set"
Rejected : Selected options " Allowed & Set"
Actually we are using material which is non deliverable but should be billed, while creating order , I can see staus at item level is open and remains open even after billed in ECC. And also we are mapping Business activity reasons to order reasons in ECC.
Not sure whether i am selecting wrong options in status profile at header level & item level?
Plz help me on this.
Thanks
shash

Preference status not changed for the processed products

Hello All,
While Aggregating the vendor declaration, I am getting the message as below
Preference status not changed for the processed products
Could you please help me to resolve this issue.
Thanks & Regards
Rahul

Hello Rahul,
aggregation is not changing status on LTVD. (Possibly LTVD has been already agregated). Newly maintained LTVD is not changing status of the product, its remaining negative whatsoever.
Kr,
Gabriel.

My mac not recognize wi-fi after sleep mode ?

my mac not recognize wi-fi after sleep mode ?

Try this when it wakes...
Instead of joining it from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.

HU status not changing after GR

Hi All,
For a stock transfer order we create outbound delivery and create HU and then do PGI and at the receiving site we do GR via HU in MIGO transaction.
however the status of the HU changes after it is created and after it is PGI ,,, but after doin GR the status does not change.
Please help me with this ,,,
Regards,
Samuel

hi,
I am doing GR in MIGO transaction with respect to outbound delivery via HU, I am not creating inbound delivery.
Regards,
Samuel

Partititon1,2,3 in group ODS,FAC status not change after data redistribute

Hello,
first thanks for your help. By now the db2 data redistribute has been sucessful. but another issue occurs , could you give me some suggestion?
1. run Tcode dbacockpit-->db2 for linux, unix, and windows database > configuration>database partiton group
i found the stutus in db partion group NGRP_FAC_AB7 and NGRP_ODS_AB7 and partion 1,2.3. is partion not in partitioning map containers created. I know if we want to change the status from this to partion in partioning map status , we should do a redistribute.
i have made a redistribute action like this
1. double click what i want to distribute
2. select the relevant partition , for example partition 0001
3 click the execute immediatelly button .
when i finished , the status is not changed . so i change the redistribute log located in /db2/db2ab7/sqllib/redist/ AB7.NGRP_FACT_AB7.2008022808582 .
the log message is
Data Redistribution cannot be continued.
Error: Redistribution failed with SQLCODE=-6047 (rc=-2145779603).
the SQL 6047 detail information is like the following. I don't know what happens.
it's a SAP bug just like the previous issue ? Could you give me some suggestion ? Thanks
db2 => ? sql6047
SQL6047N Database partition group cannot be redistributed
because table "<name>" does not have a partitioning
key.
Explanation:
At least one table in the single-node database partition does not
have a partitioning key. All tables in the single-node database
must have a partitioning key before the database partition group
can be redistributed to a multiple-node database partition
group.
The operation was not performed.
User Response:
Use the ALTER TABLE command to specify partitioning keys for
tables that do not have one. Then try the request again

Before redistribution, do your tables reside on only one partition? Does the error message you get list the table or tables that do not have a partitioning key?
All fact tables, ODS tables and PSA tables are created with a partitioning key in a SAP BI system. However, in the FACT and ODS tablespace, there are a few BI management tables (name starting with 'RS') that do not get a partitioning key by default if created in a tablespace on only one partition. The BI data distribution wizard in the DBA Cockpit takes care of some of these tables, for example RSDMFACTAB and RSDMODSTAB. Maybe there are some additional ones.
Please list the names of the tables without partitioning key. If the error message does not contain them, you can get them with the following SQL statement:
select varchar(tabname,30)
from syscat.tables a
where tbspace='<your_tablespace>'
and not exists (select partkeyseq from syscat.columns b
where a.tabschema=b.tabschema and a.tabname=b.tabname
and b.partkeyseq > 0)
Brigitte

Why status is change every time after execution of VI??

Hello,
I am not much familiar with Modbus communication,
I got one problem regarding to Modbus that when ever run my vi then after execution the status of DO3 is always changed and jump to the Alarm mode.
In attachment I have attached my screen shots you will get more clear Idea about my problem.
In LHS there is software window and before connection that software with instrument normally I set my DO3 at status mode but when I run my vi in order to check the supply voltage and after execution when I again connect that software then DO3 status always change and its come to Alarm mode.
Can you tell me that why its happen so??
and what kind of changes I have to do in order to avoid this problem....
Thank you very much.
Attachments:
DO3.png ‏386 KB

ok this problem is solve now that i have to make read holding register instead of write...
but still I am confuse about the mesurment of voltage generally i have to set like
1) when (Do3 and datalogger switch both are closed) wired is connected with DO3 and relay on data logger is closed then its shoud show me voltage less then 2V,
2)DO3 is open and datalogger is connected then voltage shoud be near to V+ (12v in my case)
3)both are open then output shoud be 0V
4)datalogger is open and DO3 is closed then voltage shoud be V+
and in above four case i have problem in 1st case only...other 3 are working OK
will you please guide me that is ther any change I have to do in data logger and what king of settign I have to to in order to get desired Output.
I am not much familier with Data logger,i have read datasheet regarding to this and i am using Agilent Data logger 34970A.
Thank you very much...
Attachments:
MeasureDO3.vi ‏33 KB

Task status not changing in UWL

Task status is not changed in UWL when the task is executed from UWL . workitems transfered from R/3 by executing a workflow .SAP says real time refresh not supports in this UWL version.
please let me know any workaround to solve this issue.
Thanks
Sarath

thats right.
UWL does not refresh immediately. You need to refresh the UWL again.
As I saw over internet, the Real-time Refresh feature for Universal Worklist is available in SAP NetWeaver 702 SP02 and above, and SAP NetWeaver CE 7.20 SP01 and above.
Thanks
Krishna

Not connected to internet after sleep

Hi my Macbook Pro 13" early 2011 is not instantly connecting to the internet after sleep. I goto network diagnostics, all green lights are on, it says your internet is working fine, I click on a bookmark, it says I'm not connected. I repeat this two or three times, and finally after clicking on the third or fourth bookmark, it connects. I'm on Sky broadband UK through an Airport Express and my iPhone, Android (eeurgh!) 'phone, other computers and PS3 all connect with no problems. Any ideas folks?
Also whilst I'm here, I've noticed software update has downloaded the same EFI firmware update four times, and that other software updates are available immediately after updating software.... Something I'm not used to? And, during restart, the computer beeps. Normal?
Regards
mackers

Well, thanks to Carolyn Samit from San Francisco I think I found the answer by deleting Cache.db from Safari prefs in the library... Haven't been on these boards for a few years now - forgot how to use them! Anyway, if anyone can help with the software update repeats before I search the answer that'd be great thanks!
Hi, nice weather
mackers

MBP Changes color settings after sleep

After my computer goes to sleep, it has recently been waking up with a different color setting. Where the yellows are very dull and the screen has a blue hue. When I go to System Pref > Displays it changes back to normal without me clicking anything. It is getting very annoying, anyone know why it is doing this?
My computer is connected to a 24" LED cinema display which doesn't change colors on its own. The laptop has also done this without being connected to cinema display.
Thanks guys

This happens to me, also.
Just as you described - it happens when connected to an external display and when not connected.
It happens to me even without sleep; screensaver is enough.
I have my computer set to ask for a password after sleep/screensaver. Do you?
charlie
P.S. I just did a search of the forums - this is apparently a very common problem, dating back at least to Leopard. I haven't seen a definitive fix for it yet.

Service Order status Not Changing From Resloved to Closed status

The service order Status not automatically moving from Resolved to closed after 30days.
Observation
We Revived program Z program ,seems to be fine.
I am set the program in debugging mode for testing the Service orders by reduce the time duraion for staus resolved to closed, am getting the getting the Error Test determination procedure is not evaluated .
Point of dout
1) Is there any relation between Test Determination Procedure and Z program.
2) while am checking for Text Customing for Consistency I found an error Log.
3) While creating Service Order Test field was Mandatory
for that have dout about is there any relation between for this program
Thanks in Advance
Regards
Raju.........

Solved ...
BD75 (RBDMOIND ) is T-Code and report name ...
need to schedule ...

Presence status not changed when using Lync 2010 Remote Call Control

Hello,
I'm currently testing the Remote Call Control functionality of Lync 2010. Call management works fine but I'm surprised that my presence status does not change to "In a Call" when the call is established.
OriginatedEvent, DeliveredEvent and EstablishedEvent are forwarded correctly to Lync Client 2010. All responses are "200 OK".
Is there something more to send to Lync Server 2010 so the status of the Lync Client gets correctly updated to "In a Call" ? Or is a plugin for the Lync Client necessary to achieve this ?
Thank you in advance,
Martin

I think there's something missing from your scenario and I don't believe you would need a plugin for this. It's been forever since I've set up RCC with Lync 2010 however. I know this isn't what you're looking for, but I've used this product in
the past to configure Lync and RCC with third party PBXs that don't support Lync/RCC but do have a TAPI interface.
http://www.estos.com/products/drivers-middleware/callcontrolgateway400.html I've been able to get a free trial before and it worked like a charm for an old 3COM phone system. If you can get a trial it might help you compare apples to apples provided
you have a TAPI driver for your PBX.
For more details on what happens behind the scenes, you might have some better luck in the MSDN dev forums:
http://social.msdn.microsoft.com/Forums/en-US/home?category=uc
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Original Macbook Pro Retina 15 not connecting to wifi after sleep

When Waking from sleep, it searches for wifi and finds it but doesn't connect most of the time. i click/select the network manually & sometimes it connects but iv ended up resorted to turning wifi off, then turn back on & it finds the network (it found earlier) AND connects to it automatically. this problem happens on other wifi's aswell, not just my home wifi.
Wondering why it can find the network after sleep, but doesn't want to connect to it. All my ios devices, my sisters MBP retina 13 connects perfectly. I've come to conclusion it must be my computer....

I to have this problem. I have a late 2013 Macbook Pro 13inch with Retina display. I soon discovered on my machine that if you disable Bluetooth then the macbook connects to the wi-fi as it should. I dont have a problem on my home network with any other apple devices and the connectivity issue is the same on what ever network I try. I soon realised that if I disabled Bluetooth the machine connects perfectly everytime. There is clearly a bug or some technical issue that occurs preventing wi-fi connection when you have Bluetooth enabled. Try it and see if it is teh same with yours?
I was hopeing that the fault or issue would be fixed with the latest OX update but alas it is still an issue for me on my machine. I have just taken to switching Bluetooth to off until I am connected and then just turn Bluetooth on if I need it.
Hopeing that some kind of fix will be issued soon.
Let me know if this Bluetooth issue is the cause of the issue as I woudl be interested.
Best wishes.
JB

The total goods movement status not changed after goods receipt using MIGO

Dear gurus:
when i use T-code MIGO doing goods-receipt against Inbound delivery, the total goods movement status don't changed. i tryed VL32N to do goods receipt, and the status changed.
how can i do to make the status change when i receive goods in MIGO against inbound delivery?
best wishes,
David

Hi,
If your MM is integrated with WM (SU mgt or HUM) you have to post the GR with Inbound delivery.
Amit

Status not changing to Available after sleep?

Similar Messages

Maybe you are looking for